Hallux rigidus: Arthroplasty or arthrodesis. What technique produces better results?

Hallux rígidus (HR) affects the first metatarsophalangeal joint (MTPJ) between 35% and 60% of the population over 65 years and there are multiple ways of treatment. Depending on the radiological stage where you find the deformity determines the procedure to be performed; in the early stages cheilectomy techniques and corrective osteotomy is performed while the more advanced ratings, the surgeon chooses destructive techniques considered as arthrodesis and arthroplasty. This final of degree project aims to focus on 1 MTPJ destructive techniques to clarify which of the procedures generates better results by a number of parameters; outcomes of the American Orthopaedic Foot scale and Ankle Society Hallux metatarsophalangeal Interphalangeal-scale (AOFAS), range of motion (ROM) of the 1ºAMTF, radiological classification. As for the implant arthroplasty technique, this article offers information on material and design that generates better relating to patient characteristics such as age, inflammatory joint diseases, viability and durability of the implant results. The conclusion from this review is that the values obtained in the arthrodesis according AOFAS decrease due to loss of mobility, but both techniques have similar values of effectiveness and concludes with the decision that the technique used is determined taking into account various factors and patient characteristics. Keywords: Hallux rígidus; (Hallux Rígidus) and surgery treatment; Hallux Rígidus arthrodesis; Hallux Rígidus arthroplasty; Hallux Rígidus (arthroplasty and arthrodesis).

Socket-shield and immediate implantation

Introduction - After tooth extraction, the alveolar bone undergoes a remodeling process, wich leads to horizontal and vertical bone loss. These resorption processes complicate dental rehabilitation, particularly in connection with implants. Various methods of guided bone regeneration have been described to retain the original dimension of the bone after extraction. Most procedures use filler materials and membranes to support the buccal plate and soft tissue, to stabilize the coagulum and to prevent epithelial ingrowth. It has also been suggested that resorption of the buccal bundle bone can be avoided by leaving a buccal root segment (socket-shield technique) in place, because the biological integrity of the buccal periodontum remains untouched. This method has also been decribed in connection with immediate implant placement. Objective - This literature review aim enumerate and describe the different treatments and tissue reactions after tooth extraction, immediate and delayed implantation. The socketshield technique, the evolution in tooth extraction and immediate implantation with high esthetic results due to the preservation of hard and soft tissues by leaving a buccal root segment in place. Materials and methods - For this purpose a research has been done and data was obtained from on-line resources: Medline, Pubmed, Scielo, Bireme, Bon, books and specialized magazines which was conducted between January 2016 and May 2016. A number of articles have been obtained in English and French ,published between 1997 and 2015 . The key words used were implantology, dental implant, hard/soft tissue, tooth extraction, immediate implantation, delayed implantation, socket-shield. Conclusion - In socket-shield technique, there were neither functional nor aesthetic changes in soft and hard tissues. It’s already a routine practice in the arsenal of highaesthetic immediate implantology and should be used when indicated. Although this technique is quiet promising, we should be aware of the incoming publications about a larger follow up and the predictability of leaving a fragment inside the socket after an extraction.

Evaluation of negative pressure vacuum-assisted system in acute and chronic wounds closure. Our experience

Negative-pressure therapy or vacuum-assisted closure (VAC) has been used in clinical applications since the 1940’s and has increased in popularity over the past decade. This dressing technique consists of an open cell foam dressing put into the wound cavity, a vacuum pump produces a negative pressure and an adhesive drape. A controlled sub atmospheric pressure from 75 to 150 mmHg is applied. The vacuum-assisted closure has been applied by many clinicians to chronic wounds in humans; however it cannot be used as a replacement for surgical debridement. The initial treatment for every contaminated wound should be the necrosectomy. The VAC therapy has a complementary function and the range of its indications includes pressure sores, stasis ulcers, chronic wounds such as diabetic foot ulcers, post traumatic and post operative wounds, infected wounds such as necrotizing fasciitis or sternal wounds, soft-tissue injuries, bone exposed injuries, abdominal open wounds and for securing a skin graft. We describe our experience with the VAC dressing used to manage acute and chronic wounds in a series of 135 patients, with excellent results together with satisfaction of the patients.

The bovine pericardial patch in breast reconstruction: a case report

In the last years there has been a growing demand of plastic surgery for soft tissue reconstruction. In response to this, many biological and synthetic devices have been produced, aiming to allow wide and complex body reshapings. Acellular dermal matrices are one of these devices, and are made of human or animal tissues made acellular after their sampling. They are used for cervical, breast and abdominal wall reconstruction. Tutopatch®, generally used for face reconstruction or neurosurgery, is made of acellular bovine pericardium, and its high amount of collagen allows a fast tissue healing and a scaffold for the surrounding tissue rigeneration. In our case report Tutopatch® has been used in immediate breast reconstruction after mastectomy. This device has been used to close laterally the subpectoral pocket, allowing a bigger volume prosthesis to be placed We have not experienced particular postoperatory complications, and after 12 months of follow up we have found a valid functional and aesthetic result. We consider Tutopatch® as a valid alternative to other acellular dermal matrices specifically designed for breast reconstruction.

Análise dos elementos que contribuem para a harmonia e estética do sorriso no contexto da face

A construção de um sorriso saudável e estético na atualidade, tem o seu sucesso associado à sinergia de todas as especialidades na área da Medicina Dentária. Este trabalho tem como objetivo determinar quais os aspetos que contribuem para a harmonia do sorriso com base na análise dos elementos faciais. Os components faciais e musculares são particulares de cada individuo e intervém diretamente no tipo de sorriso. Fatores como a raça, a idade e o género são variáveis a ter em consideração na construção de um sorriso harmónico. O presente estudo bibliográfico, faz uma abordagem sobre a estética e harmónica do sorriso analisando os aspetos tegumentares faciais, gengivais e as proporções dentárias adequadas à contrução de um sorriso belo e saudável. A aparência do sorriso tem um grande impato na vida dos indivíduos, podendo afetar desde o convívio social até mesmo as relações profissionais. Este é um dos principais motivos pelo qual pacientes recorrem a ajuda de especialistas da área. O estudo efetuado revelou que a análise da face é fundamental no estudo do sorriso. Ela identifica as caraterísticas menos favoráveis e mais favoráveis de cada pessoa com o intúito de obter um equilíbrio entre a face e o sorriso.

Prevenção da reabsorção óssea alveolar após extração dentária

Introdução: O processo alveolar é o conjunto de osso que se encontra em redor da raiz do dente. Este osso é sensível a uma variedade de fatores ambientais e fisiológicos que influenciam a sua integridade e o seu funcionamento. Como tal, a sua formação assim como a sua preservação é dependente da presença contínua do dente. A reabsorção do processo alveolar após extração dentária é uma consequência natural e fisiológica indesejável, que pode dificultar a colocação de um implante dentário na posição desejada. Com o aumento cada vez mais das demandas estéticas em medicina dentária, torna-se, portanto, necessário prevenir que a reabsorção óssea provoque este defeito na arcada dentária. Objetivos: Realizar uma revisão bibliográfica sobre as várias técnicas e materiais para preservação do rebordo alveolar, a fim de prevenir ou minimizar a reabsorção alveolar após extração dentária. Material e Métodos: A pesquisa foi realizada nas bases de dados Pubmed, B-on e Scielo, não foi aplicado nenhum limite temporal, e os critérios de inclusão foram artigos em língua inglesa e portuguesa. Num total de 164 artigos, selecionaram-se 82 estritamente relacionados com o tema. Os artigos excluídos desviavam-se do objetivo do trabalho ou eram inconclusivos. Selecionaram-se, também, capítulos do livro Clinical Periodontology and Implant Dentistry Volume 1 e 2, dos autores Niklaus P.Lang e Jan Lindhe. Desenvolvimento: De modo a compreender como o processo alveolar reabsorve, deve-se ter em conta as várias técnicas que se podem realizar para permitir uma boa quantidade de osso remanescente na arcada adequada a cada caso para uma possível reabilitação. As técnicas de preservação do osso alveolar após extração passam pela realização de técnicas cirúrgicas minimamente invasivas, estabilização do coágulo pelo princípio da cicatrização por primeira intenção usando membranas ou retalhos, preenchimento do alvéolo dentário com materiais de enxerto ou substitutos ósseos, terapias combinadas com a colocação de implantes imediatos e o recurso a células e fatores de crescimento. Conclusão: A preservação alveolar tem grande importância para uma posterior reabilitação oral com implantes com maior quantidade de osso disponível do que quando não é feita qualquer tipo de preservação. A extração das peças dentárias deve ser feita com cuidado para preservar ao máximo ou não danificar as superfícies ósseas remanescentes. É aconselhado que o encerramento da ferida seja por primeira intenção e que proporcione estabilidade ao coágulo, podendo ser usado retalhos ou mesmo membranas. O uso de enxertos ósseos tem uma importante função de proporcionar uma matriz para o coágulo se formar e promover o processo de cicatrização. O método de implante imediato, para além de ser bastante usado, tem como finalidade o conforto para o paciente de não ser submetido a uma posterior cirurgia para colocação do mesmo e, simultaneamente, mantem a estabilidade dos tecidos moles. Ainda uma técnica menos usada é com células e fatores de crescimento que proporciona uma cicatrização mais rápida e um aumento do potencial regenerativo dos tecidos.

Gewebeansatz-Strukturen auf pyritisierten Steinkernen von Ammonoideen

3400 pyritized internal moulds of Upper Devonian, Triassic, Jurassic and Lower Cretaceous ammonoids show various soft tissue attachment structures. They are preserved as regularly distributed black patterns on the moulds. All structures can be interpreted as attachment areas of muscles, ligaments and intracameral membranes. Paired structures are developed along the umbilicus and on the flanks of the moulds, unpaired ones appear on the middle of their dorsal and ventral sides. Strong lateral muscles cause paired twin lines on the flanks of the phragmocone and of the body chamber. A ventral muscle is deduced from small rounded or crescent shaped spots in front of each septum on the ventral side. These spots are often connected, forming a band-like structure. Broad dark external bands on the ventral side of the phragmocone, ventral preseptal areas in the posterior part of the living chamber, small twin lines or oval shaped areas on the ventral side of the living chamber represent paired or unpaired attachment areas of the hyponome muscle. A middorsal muscle is documented by small roughened areas in front of each dorsal lobe. Dark spots along the umbilicus, often connected and thus forming a band-like structure (tracking band), are remains of a pair of small dorsolateral muscles at the posterior end of the soft body. Dark bands, lines and rows of small crescent shaped structures behind the tips of sutural lobes are due to spotlike fixation places of the posterior part of the mantle and their translocation before subsequent septal secretion. Devonian goniatites had a paired system of lateral and ventrolateral muscles preserved on the moulds as black or incised lines on the flanks of the living chamber and as dark preseptal areas, ventrally indented. These structures represent the attachment areas of paired lateral cephalic and paired ventral hyponome retractors. Fine black lines on the phragmocone situated parallel to the sutures (pseudosutures) represent a rhythmical secretion of camera! membranes during softbody translocation. Goniatites had a paired system of lateral and ventrolateral muscles, whilst Neoammonoids have a paired lateral and dorsolateral system, and, additionally, an unpaired system on the ventral and on the dorsal side. Mesoammonoids show only a paired lateral and an unpaired dorsal one. Fine black lines situated parallel to the saddles and behind the lobes of the suture line can be interpreted as structures left during softbody translocation and a temporary attachment of rhythmical secreted cameral membranes. Cameral membranes had supported the efficiency of the phragmocone. Only some of the observed structures are also present in recent Nautilus. Differences in the form and position of attachment sites between ammonoids and recent Nautilus indicate different soft body organizations between ammonoids and nautiloids. The attachment structures of goniatites especially of tornoceratids can be compared with those of Nautilus which indicates Richter - Gewebeansatz-Strukturen bei Ammonoideen 3 a comparable mode of life. Differences in the form and position of attachment structures between goniatites and ammonites may indicate an increasing differentiation of the muscular system in the phylogeny of this group. Different soft body organization may depend on shell morphology and on a different mode of life. On the modification or reduction of distinct muscle systems ammonoids can be assigned to different ecotypes. Based on shell morphology and the attachment areas of cephalic and hyponome retractor muscles two groups can be subdivided: - Depressed, evolute morphotypes with longidome body-chambers show only small ventral hyponome retractor muscles. Lateral cephalic retractors are not developed. These morphotypes are adapted to a demersal mode of life. Without strong cephalic retractor muscles no efficient jet propulsion can be produced. These groups represent vertical migrants with efficient phragmocone properties (multilobate sutures, cameral membranes, narrow septal spacing). - Compressed, involute moiphotypes with brevidome body-chambers show strong cephalic and hyponome retractor muscles and represent a group of active swimmers. These morphotypes were able to live at different depths, in the free water column or/and near the seafloor. They are not confined only to one habitat. Most of the examined genera and species belong to this group. Changes of the attachment structures in the course of ontogeny confirm that juveniles of Amaltheus and Quenstedtoceras lived as passive planche drifters in upper and intermediate parts of the free water column after hatching. At the end of the juvenile stage with a shell diameter of 0,3 - 0,5 cm cephalic retractor muscles developed. With the beginning of an active swimming mode of life (neanic stage) the subadult animals left the free water column and moved into shallow water habitats. Fuciniceras showed no marked changes in the attachment structures during ontogeny. This indicates that there occur no differences in the mode of life between juvenile and adult growth stages. Based on attachment structures and shell morphology of Devonian goniatites their relation to the systematic position permits statements about probable phylogenetic relationships between the Cheiloceratidae and Tornoceratidae. In some cases attachment structures of ammonites permit statements about phylogenetic relationships on family and genus level.

Mesenchymal chondrosarcoma: prognostic factors and outcome in 113 patients. A European Musculoskeletal Oncology Society study

BACKGROUND: Mesenchymal chondrosarcoma (MCS) is a distinct, very rare sarcoma with little evidence supporting treatment recommendations. PATIENTS AND METHODS: Specialist centres collaborated to report prognostic factors and outcome for 113 patients. RESULTS: Median age was 30 years (range: 11-80), male/female ratio 1.1. Primary sites were extremities (40%), trunk (47%) and head and neck (13%), 41 arising primarily in soft tissue. Seventeen patients had metastases at diagnosis. Mean follow-up was 14.9 years (range: 1-34), median overall survival (OS) 17 years (95% confidence interval (CI): 10.3-28.6). Ninety-five of 96 patients with localised disease underwent surgery, 54 additionally received combination chemotherapy. Sixty-five of 95 patients are alive and 45 progression-free (5 local recurrence, 34 distant metastases, 11 combined). Median progression-free survival (PFS) and OS were 7 (95% CI: 3.03-10.96) and 20 (95% CI: 12.63-27.36) years respectively. Chemotherapy administration in patients with localised disease was associated with reduced risk of recurrence (P=0.046; hazard ratio (HR)=0.482 95% CI: 0.213-0.996) and death (P=0.004; HR=0.445 95% CI: 0.256-0.774). Clear resection margins predicted less frequent local recurrence (2% versus 27%; P=0.002). Primary site and origin did not influence survival. The absence of metastases at diagnosis was associated with a significantly better outcome (P<0.0001). Data on radiotherapy indications, dose and fractionation were insufficiently complete, to allow comment of its impact on outcomes. Median OS for patients with metastases at presentation was 3 years (95% CI: 0-4.25). CONCLUSIONS: Prognosis in MCS varies considerably. Metastatic disease at diagnosis has the strongest impact on survival. Complete resection and adjuvant chemotherapy should be considered as standard of care for localised disease.

Validation of single photon absorptiometry for on-farm measurement of density and mineral content of tail bone in cattle

A validation study examined the accuracy of a purpose-built single photon absorptiometry (SPA) instrument for making on-farm in vivo measurements of bone mineral density (BMD) in tail bones of cattle. In vivo measurements were made at the proximal end of the ninth coccygeal vertebra (Cy9) in steers of two age groups (each n = 10) in adequate or low phosphorus status. The tails of the steers were then resected and the BMD of the Cy9 bone was measured in the laboratory with SPA on the resected tails and then with established laboratory procedures on defleshed bone. Specific gravity and ash density were measured on the isolated Cy9 vertebrae and on 5-mm2 dorso-ventral cores of bone cut from each defleshed Cy9. Calculated BMD determined by SPA required a measure of tail bone thickness and this was estimated as a fraction of total tail thickness. Actual tail bone thickness was also measured on the isolated Cy9 vertebrae. The accuracy of measurement of BMD by SPA was evaluated by comparison with the ash density of the bone cores measured in the laboratory. In vivo SPA measurements of BMD were closely correlated with laboratory measurements of core ash density (r = 0.92). Ash density and specific gravity of cores, and all SPA measures of BMD, were affected by phosphorus status of the steers, but the effect of steer age was only significant (P < 0.05) for steers in adequate phosphorus status. The accuracy of SPA to determine BMD of tail bone may be improved by reducing error associated with in vivo estimation of tail bone thickness, and also by adjusting for displacement of soft tissue by bone mineral. In conclusion a purpose-built SPA instrument could be used to make on-farm sequential non-invasive in vivo measurements of the BMD of tailbone in cattle with accuracy acceptable for many animal studies.

Assessment of seawater pollution by heavy metals (lead & cadmium) in the Qeshm rocky shore: use of the sea urchin, Echinometra mathaei, as a bioindicator

The general purpose of this study is to investigate the degree of heavy metal accumulation in hard and soft tissue of sea urchin, and determining these tissues as the most suitable bioindicator for lead and cadmium in the environment of the sampling stations. The way of doing this assessment was MOOPAM. Samples were prepared and classified according to sea urchin organ (soft tissue, hard tissue, Tube feet, Test, Lantern Structure and spines) and then lead and cadmium were measured in them. Result of this study shows that hard tissue is a better index of lead and cadmium than soft tissue. The result of bioaccumulation of lead in the related tissue was found to be in the following order: Soft tissue=21, hard tissue=28.1, Test=20.8, Lantern Structure=20.5 and spines=23.9. The result of bioaccumulation of cadmium in the related tissue was found to be in the following order: Soft tissue=9. 7, hard tissue=5.01, Test=4.2, Lantern Structure=4.06 and spines=5.53.

Malignant Otitis Externa and Stroke

Malignant otitis externa (MOE) is an aggressive but benign entity which evolves into skull base osteomyelitis. An 81-year-old female patient was admitted for left hemiparesis and homonymous hemianopia. She complained of headache radiating to the right cervical area. A recent history of recurrent otitis media was present. Head and neck imaging showed an ischemic infarction (right temporo-occipital) and a parapharyngeal soft tissue mass originating in an external and medial ear infection. Culture samples revealed Pseudomonas aeruginosa infection leading to the diagnosis of Malignant otitis externa (MOE). Parenteral antibacterial therapy and hyperbaric oxygen therapy resulted in improvement.

Seasonal variation of acetylcholinesterase, catalase, glutathione s transferase in different size of Pinctada radiata and metal pollution (Pb, Cd, Ni) in Persian Gulf

There are various tools for monitoring the concentration of pollutants on aquatic ecosystems. Today these studies are based on biological monitoring and biomarkers. The aim of this study was to measure the concentration of the acetylcholinesterase (AChE), glutathione S-transferase and catalase as biomarkers of heavy metal contamination in pearl oyster Pinctada radiata and their mechanism in aquatic ecosystems. Heavy metals lead, cadmium and nickel were measured in soft tissue and studied stations in four seasons. Samples were collected seasonally in Lavan stations, Hendurabi and Nakhilo (in the northern Persian Gulf) from spring 2013 to winter of that year by scuba diving. Pearl oysters are divided according to their shells size; shells separated from soft tissues and were transferred to the laboratory for analysis of heavy metals and enzymes. Moopam standard method for were used for measuring the concentration of heavy metals and for analyzing tissue concentrations of glutathione S-transferase in Clam the method recommended by Habig et al in 1974 were used. For measuring acetylcholinesterase Ellman method were used. Catalase contamination in pearl oyster in the supernatant obtained from the study based on the method homogeate soft tissue of mussels (Abei, 1974) was evaluated. The results showed that the concentration of lead has significant difference in sediments station, the concentration of lead in Lavan is significantly higher than the other two stations, This could be due to the movement of tanker, boats and floating refueling and with a considerable amount of wastewater containing oil and Petroleum into the water, and also due to precipitation and industrial discharges the lead in the region is increasing, land-disposed sewage sludge, has large concentrations of lead. Compare the results of this study with standards related and other similar studies at the regional and international level showed that pollutant concentration of heavy metals in all cases significantly less than all the standards and guide values associated. And also compared to other world research results have been far less than others, Being Less of the conclusion given in this research according that nickel is one of the indicators of oil pollution in the study area and emissions have been relatively low of oil. The concentration of acetylcholinesterase at several stations, in large and small sizes and in the seasons had no significant difference. Variations of catalase, and glutathione S-transferase were almost similar to each other and parameters, station and seasons were significantly different in the concentrations of these enzymes. The effects and interaction between various parameters indicate that following parameters has impact on the concentration of catalase and glutathione S-transferase. Stations; Seasonal changes in antioxidant enzymes related to (assuming a constant in salinity and oxygen) to age, reproductive cycle, availability of food and water temperature. With increasing temperature at warm season, antioxidant enzymes were increase, with increasing temperature and abundance of food in the environment the amount of antioxidant enzymes may increase. The presence of the enzyme concentration may indicate that the higher levels of the enzyme to eliminate ROS activities to be any healthier situation. At the time of gonads maturation and spawning season catalase activity increases. This study also indicates that catalase was significantly higher in the warm season. Due to low pollutants of heavy metals in the study area, a lower level of contaminants were observed in shellfish tissue incidents of international standards and strong correlation between the amount of heavy metal contamination in pearl oyster tissue and enzymes was not observed. Therefore, we can say that the pearl oyster remains in a healthy condition and the amount of enzyme is normal.

Deficiencias minerales en bovinos para carne: diagnóstico, caracterización y control

La demanda de una producción de alimentos cada vez mayor a nivel mundial sumado a la tecnificación y al ritmo acelerado del progreso de las explotaciones agropecuarias actuales hacen que el ganado deba soportar elevadas presiones de producción aumentando los requerimientos de nutrientes. Este es el caso de los minerales considerados actualmente elementos esenciales para los animales, aunque tradicionalmente fueron definidos como los nutrientes pobres de la nutrición y alimentación animal. Actualmente se ha demostrado con evidencia clínica y productiva, el importante rol metabólico de los minerales en el animal sano y productivo, como también se ha definido qué elemento mineral y porcentaje del mismo es requerido para el normal funcionamiento del organismo. Los macro-minerales (calcio, magnesio, fósforo, sodio, potasio, cloro y azufre) y los oligo-minerales (cobre, zinc, hierro, selenio, cobalto, iodo, manganeso, molibdeno y cromo) son elementos esenciales y necesarios para transformar la proteína y la energía de los alimentos en componentes del organismo o en productos animales como leche, carne, crías, piel, lana. Además, ayudan al organismo a combatir las enfermedades, manteniendo al animal en buen estado de salud. Se ha considerado a los minerales como el tercer grupo limitante en la nutrición animal, siendo a su vez, el que mayor potencial y menor costo tiene para incrementar la producción del ganado. Los minerales desempeñan funciones tan importantes como ser constituyentes de la estructura ósea y dental, de tejidos blandos y líquidos corporales. Están involucrados en el funcionamiento celular, siendo activadores de más de trescientas enzimas, constituyentes esenciales de vitaminas, hormonas y pigmentos respiratorios y facilitando la actividad de los microorganismos del rumen. Cuando el aporte de minerales en la ración no es el adecuado en calidad y/o cantidad se originan las deficiencias minerales, encuadradas dentro de las enfermedades metabólicas o enfermedades de la producción. Estas han sido informadas en casi todo el mundo y son responsables de importantes pérdidas económicas en los rodeos de bovinos para carne. Las deficiencias y/o desequilibrios minerales pueden causar los siguientes trastornos en los animales: bajo porcentaje de parición, mayor número de servicios por concepción, abortos, retenciones placentarias, incremento del intervalo entre partos, baja producción de leche, menor peso al nacimiento y al destete, menor porcentaje de destete, menor ganancia de peso, mayor incidencia de enfermedades infecciosas, fracturas espontáneas, diarrea, deformación de huesos y mortandad. Así cobra importancia el diagnóstico mediante el análisis de la sangre de los animales, del pasto y el agua que consumen y la caracterización de estas deficiencias en primarias o secundarias con el objetivo de poder realizar un control de las mismas mediante un adecuado plan de suplementación mineral acorde a las necesidades de los distintos establecimientos agropecuarios.

Développement de matériaux à base de protéines extraites du byssus de la moule bleue Mytilus edulis

Le byssus est un amas de fibres que les moules produisent afin de s’ancrer aux surfaces immergées sous l’eau. Ces fibres sont pourvues de propriétés mécaniques impressionnantes combinant rigidité, élasticité et ténacité élevées. De plus, elles possèdent un comportement d’auto-guérison de leurs propriétés mécaniques en fonction du temps lorsque la contrainte initialement appliquée est retirée. Les propriétés mécaniques de ces fibres sont le résultat de l’agencement hiérarchique de protéines de type copolymère blocs riches en collagène et de la présence de métaux formant des liens sacrificiels réversibles avec certains acides aminés comme les DOPA et les histidines. Bien que cette fibre soit très intéressante pour la production de matériaux grâce à son contenu élevé en collagène potentiellement biocompatible, cette ressource naturelle est traitée comme un déchet par les mytiliculteurs. L’objectif de cette thèse était de valoriser cette fibre en extrayant les protéines pour générer une nouvelle classe de matériaux biomimétiques. Un hydrolysat de protéines de byssus (BPH) riche en acides aminés chargés, i.e. ~30 % mol, et permettant de former des films a pu être généré. Lorsque solubilisé à pH 10.5, le BPH forme un hydrogel contenant des structures en triple hélice de collagène et des feuillets β anti-parallèles intra- et inter-moléculaires. Suite à l’évaporation de l’eau, le film de BPH résultant est insoluble en milieu aqueux à cause des structures secondaires très stables agissant comme points de réticulation effectifs. Les propriétés mécaniques des films de BPH sont modulables en fonction du pH. Au point isoélectrique (pI = 4.5), les interactions électrostatiques entre les charges opposées agissent comme points de réticulation et augmentent la rigidité des films et leur contrainte à la rupture sans affecter la déformation à la rupture. À pH plus élevé ou plus bas que le pI, les performances mécaniques des films sont plus faibles à cause de la répulsion entre les groupements fonctionnels de même charge qui interagissent plutôt avec les molécules d’eau et causent le gonflement de la matrice protéique des films. Le BPH contenant un nombre élevé d’acides aminés chargés et réactifs, nous avons pu réticuler les films de manière covalente à l’aide d’EDC ou de glutaraldéhyde. Les propriétés mécaniques des films sont modulables en fonction de la concentration d’EDC utilisée lors de la réticulation ou en employant du glutaraldéhyde comme agent réticulant. Les films sont à la fois plus rigides et plus forts avec un degré de réticulation élevé, mais perdent leur extensibilité à mesure que les segments libres de s’étirer lors d’une traction deviennent entravés par les points de réticulation. La réticulation augmente également la résistance à la dégradation enzymatique par la collagénase, les films les plus fortement réticulés lui étant pratiquement insensibles. La spectroscopie infrarouge montre enfin que la réticulation entraîne une transition de feuillets β anti-parallèles inter-moléculaires vers des structures de type hélices de collagène/PPII hydratées. Des liens sacrificiels ont été formés dans les films de BPH par traitement au pI et/ou avec différents métaux, i.e. Na+, Ca2+, Fe3+, afin de moduler les propriétés mécaniques statiques et d’évaluer le rôle de ces traitements sur le comportement d’auto-guérison lors de tests mécaniques cycliques avec différents temps de repos. Plus la valence des ions métalliques ajoutés augmente, plus les propriétés mécaniques statiques affichent un module, une contrainte à la rupture et une ténacité élevés sans toutefois affecter la déformation à la rupture, confirmant la formation de liens sacrificiels. Les tests mécaniques cycliques montrent que les traitements au pI ou avec Ca2+ créent des liens sacrificiels ioniques réversibles qui mènent à un processus d’auto-guérison des performances mécaniques dépendant du pH. L’ajout de Fe3+ à différentes concentrations module les performances mécaniques sur un plus large intervalle et la nature plus covalente de son interaction avec les acides aminés permet d’atteindre des valeurs nettement plus élevées que les autres traitements étudiés. Le Fe3+ permet aussi la formation de liens sacrificiels réversibles menant à l’auto-guérison des propriétés mécaniques. Les spectroscopies Raman et infrarouge confirment que le fer crée des liaisons avec plusieurs acides aminés, dont les histidines et les DOPA. Les résultats dans leur ensemble démontrent que les films de BPH sont des hydrogels biomimétiques du byssus qui peuvent être traités ou réticulés de différentes façons afin de moduler leurs performances mécaniques. Ils pourraient ainsi servir de matrices pour des applications potentielles dans le domaine pharmaceutique ou en ingénierie tissulaire.

Evaluation of the antioxidant activity and antitumor activity of marine invertebrates extracts

Dissertação de Mestrado, Biologia Marinha, Faculdade de Ciências e Tecnologias, Universidade do Algarve, 2014