Monitoreo de condiciones de higiene y seguridad del ambiente en entornos industriales usando redes de sensores inalámbricos

Resumen: Las redes de sensores inalámbricos han atraído mucha atención en los últimos años debido a la integración de tecnología inalámbrica, computación y tecnología de sensores. Estas redes consisten en una serie de nodos equipados con capacidades de procesamiento, comunicación y sensado. Utilizan protocolos especiales de radio para transmitir datos en un modo multisalto de operación. En este trabajo se propone utilizar una red de sensores para el monitoreo de las condiciones ambientales de Higiene y Seguridad en entornos industriales. Concretamente se monitorean Temperatura, Humedad, Ruido y Luminosidad. Se propone esta recolección de datos para dar soporte a la inspección anual de un auditor externo, por lo que no se considera esta recolección como crítica dado que no controlan ningún dispositivo. En primera instancia se aborda el problema utilizando una red de sensores con módulos que utilizan el protocolo 802.15 los cuales transmiten a un nodo maestro que sirve como gateway para enviar la información a un servidor que la almacena. La recolección de datos se realiza a través de una plataforma arduino como interface entre el módulo inalámbrico y los sensores. Esta primera propuesta es contrastada con un enfoque de Internet de las Cosas (IoT) utilizando módulos Arduino con WiFi embebido, denominados Wido, que permiten la comunicación de datos directamente al servidor de almacenaje. El trabajo comprende la caracterización del problema, elección del hardware, diseño de la red y la realización de pruebas para evaluar el funcionamiento de ambos enfoques.

A 18-years long (1993-2011) snow and meteorological dataset from a mid-altitude mountain site (Col de Porte, France, 1325 altitude)

A quality-controlled snow and meteorological dataset spanning the period 1 August 1993-31 July 2011 is presented, originating from the experimental station Col de Porte (1325 m altitude, Chartreuse range, France). Emphasis is placed on meteorological data relevant to the observation and modelling of the seasonal snowpack. In-situ driving data, at the hourly resolution, consist of measurements of air temperature, relative humidity, windspeed, incoming short-wave and long-wave radiation, precipitation rate partitioned between snow- and rainfall, with a focus on the snow-dominated season. Meteorological data for the three summer months (generally from 10 June to 20 September), when the continuity of the field record is not warranted, are taken from a local meteorological reanalysis (SAFRAN), in order to provide a continuous and consistent gap-free record. Data relevant to snowpack properties are provided at the daily (snow depth, snow water equivalent, runoff and albedo) and hourly (snow depth, albedo, runoff, surface temperature, soil temperature) time resolution. Internal snowpack information is provided from weekly manual snowpit observations (mostly consisting in penetration resistance, snow type, snow temperature and density profiles) and from a hourly record of temperature and height of vertically free ''settling'' disks. This dataset has been partially used in the past to assist in developing snowpack models and is presented here comprehensively for the purpose of multi-year model performance assessment. The data is placed on the PANGAEA repository (doi:10.1594/PANGAEA.774249) as well as on the public ftp server ftp://ftp-cnrm.meteo.fr/pub-cencdp/.

社会科学研究所の機関リポジトリ : 日本貿易振興機構アジア経済研究所機関リポジトリ（ARRIDE）

The mission of the Institute of Developing Economies, Japan External Trade Organization (IDE-JETRO) is to make intellectual contributions to the world. In 2006 IDE officially launched its Institutional Repository, ARRIDE based on DSpace to accomplish the mission more effectively. ARRIDE was designed as a three server structure; external server, internal server and development server. Since IDE has copyright on the articles produced by its research staff through their research activities, it can deposit these articles without asking authors for permission, which guarantees sustainability of the Repository. In order that contents in ARRIDE are accessed worldwide IDE has been providing various search engines with proper metadata. Among them, RePEc that is a decentralized database on social sciences is very important.

A Model-Based Monitoring Architecture for Heterogeneous Enterprise Services and Information Systems

Runtime management of distributed information systems is a complex and costly activity. One of the main challenges that must be addressed is obtaining a complete and updated view of all the managed runtime resources. This article presents a monitoring architecture for heterogeneous and distributed information systems. It is composed of two elements: an information model and an agent infrastructure. The model negates the complexity and variability of these systems and enables the abstraction over non-relevant details. The infrastructure uses this information model to monitor and manage the modeled environment, performing and detecting changes in execution time. The agents infrastructure is further detailed and its components and the relationships between them are explained. Moreover, the proposal is validated through a set of agents that instrument the JEE Glassfish application server, paying special attention to support distributed configuration scenarios.

New Methodology for Integrating Teams into Multidisciplinary Project Based Learning

This paper describes the collaboration among students and professors in four different subjects, to develop multidisciplinary projects. The objective is to simulate the conditions in a company environment. A new methodology based on student interaction and content development in a Wiki environment has been developed. The collaborative server created an ‘out of the classroom’ discussion forum for students of different subjects, and allowed them to compile a ‘project work’ portfolio. Students and professors participated with enthusiasm, due to the correct well-distributed work and the easiness of use of the selected platform in which only an internet connected computer is needed to create and to discuss the multidisciplinary projects. Quality of developed projects has been dramatically improved due to integration of results provided from the different teams.

Knowledgeable Feedback via a Cast of Virtual Characters with Different Competences

DynaLearn (http://www.DynaLearn.eu) develops a cognitive artefact that engages learners in an active learning by modelling process to develop conceptual system knowledge. Learners create external representations using diagrams. The diagrams capture conceptual knowledge using the Garp3 Qualitative Reasoning (QR) formalism [2]. The expressions can be simulated, confronting learners with the logical consequences thereof. To further aid learners, DynaLearn employs a sequence of knowledge representations (Learning Spaces, LS), with increasing complexity in terms of the modelling ingredients a learner can use [1]. An online repository contains QR models created by experts/teachers and learners. The server runs semantic services [4] to generate feedback at the request of learners via the workbench. The feedback is communicated to the learner via a set of virtual characters, each having its own competence [3]. A specific feedback thus incorporates three aspects: content, character appearance, and a didactic setting (e.g. Quiz mode). In the interactive event we will demonstrate the latest achievements of the DynaLearn project. First, the 6 learning spaces for learners to work with. Second, the generation of feedback relevant to the individual needs of a learner using Semantic Web technology. Third, the verbalization of the feedback via different animated virtual characters, notably: Basic help, Critic, Recommender, Quizmaster & Teachable agen

Desarrollo de una aplicación software para laboratorios remotos

Las prácticas en laboratorios forman una parte muy importante de la formación en todos los programas docentes. A pesar de esta importancia, la creación de un laboratorio no es una tarea fácil, ya que el hecho de equipar un laboratorio puede suponer un gran gasto económico, tanto inicial como posterior. Como solución, surge la educación a distancia, y en concreto los laboratorios virtuales, es decir, simulaciones de un laboratorio real utilizando modelos matemáticos. Por sus características y flexibilidad se han ido desarrollando laboratorios virtuales en el ámbito docente, pero no todas las áreas cuentan con tantas posibilidades o facilidades como en la electrónica. La mayoría de los laboratorios accesibles desde Internet que hay en la actualidad dentro de la enseñanza a distancia o formación online, son virtuales. El laboratorio que se ha desarrollado tiene como principal ventaja la realización de prácticas controlando instrumentos y circuitos reales de forma remota. El proyecto consiste en realizar un sistema software para implementar un laboratorio remoto en el área de la electrónica analógica, que pueda ser utilizado como complemento a las actividades formativas que se realizan en los laboratorios de los centros de enseñanza. El sistema completo también consta de un hardware controlado mediante buses de comunicación estándar, que permite la implementación de distintos circuitos analógicos, de tal forma que se pueda realizar prácticas sobre circuitos físicos reales. Para desarrollar un laboratorio lo más real posible, la aplicación que maneja el estudiante es un visor 3D. Con la utilización de un visor 3D lo que se pretende es tener un aumento de la realidad a la hora de realizar las prácticas de laboratorio remotamente. El sistema desarrollado cuenta con un sistema de comunicación basado en un modelo cliente-servidor: • Servidor: se encarga de procesar las acciones que realiza el cliente y controla y monitoriza los instrumentos y dispositivos del sistema hardware. • Cliente: sería el usuario final, que mediante un visor 3D comunica las acciones a realizar al servidor para que éste las procese. Practices in laboratories are a very important part of training in all educational programs. Despite this importance, the establishment of a laboratory is not an easy task, since the fact of equipping a laboratory can be a great economic budget, both initial and subsequent spending. As a solution, appears the education at distance (online), and in particular the virtual labs, namely simulations of a real laboratory by using mathematical models. Virtual laboratories in the field of teaching have been developed for its features and flexibility, but not all areas have so many possibilities or facilities as in electronics. The most accessible laboratories from the Internet that are currently accessible within the distance or e-learning (on-line) are virtual. The laboratory which has been developed has as a main advantage to make practices or exercises in the fact of controlling instruments and real circuits remotely. The project consists of making a software system in order to implement a remote laboratory in the area of analog electronics that can be used as a complement to the others training activities to be carried out. The complete system also consists of a controlled hardware by standard communication buses that allow the implementation of several analog circuits, in such a way that practices can control real physical circuits. To develop a laboratory as more realistic as possible, the application that manages the student is a 3D viewer. With the use of a 3D viewer, is intended to have an increase in reality when any student wants to access to laboratory practices remotely. The developed system has a communication system based on a model Client/Server: • Server: The system that handles actions provided by the client and controls and monitors the instruments and devices in the hardware system. • Client: The end user, which using a 3D viewer, communicates the actions to be performed at the server so that it will process them.

Monitor sísmico interactivo

Este trabajo tiene como objetivos la monitorización en tiempo real de la actividad sísmica, tanto próxima como lejana, a partir de los datos sísmicos registrados por una estación de banda ancha, y el desarrollo de un sistema de difusión interactiva de información actualizada de terremotos, destinado al público general. Ambas fuentes de información se mostrarán a través de una Unidad de Visualización denominada “Monitor Sísmico Interactivo”. El registro de los datos sísmicos se realiza utilizando el sensor de tres componentes de la estación sísmica GUD, perteneciente a la Red Digital de Banda Ancha y transmisión digital del Instituto Geográfico Nacional, instalada en la Basílica del Valle de los Caídos, en lalocalidad de Guadarrama (Madrid). En la E.T.S.I. Topografía, Geodesia y Cartografía se ha instalado un ordenador con conexión a Internet, para la recepción y almacenamiento de los datos, y los programas Scream y Drumplot desarrollados por Guralp, necesarios para la monitorización de la señal sísmica en tiempo real. A partir de estos datos, mediante aplicaciones desarrolladas bajo programación Linux y haciendo uso de las herramientas que ofrece el software SAC (Seismic Analysis Code), se genera además un registro gráfico y una película animada de dicha segmentación para cada evento. Se ha configurado un servidor de correo y una cuenta para la recepción de dos tipos de mensajes de correo, enviados desde la sede central del Instituto Geográfico Nacional, con la información de los eventos registrados por GUD una vez revisados: - Mensajes enviados diariamente, con un listado de eventos ocurridos en los 30 últimos días. - Mensajes con la información en cuasi tiempo real de la última alerta sísmica. Se ha desarrollado el programa “saco” para la gestión del correo recibido que analiza la información sísmica, la almacena en ficheros y ejecuta sobre ellos las aplicaciones de dibujo. Estas aplicaciones han sido previamente desarrolladas bajo programación Linux y software GMT (Generic Mapping Tools), y a partir de ellas se generan automáticamente las distintas imágenes que se visualizan en el Monitor Sísmico: un mapa de sismicidad próxima en la Península Ibérica, un mapa de sismicidad lejana en el mundo, un mapa de detalle para localizar y representar la última alerta generada, los listados con la información de los eventos representados en los mapas, los registros gráficos y las películas animadas de dichos sismogramas. Monitor Sísmico Interactivo ha sido desarrollado para ofrecer además la posibilidad de interactuar con la Unidad de Visualización: se ha creado una base de datos para uso científico donde se almacenan todos los eventos registrados por GUD. Así el usuario puede realizar una petición, a través del envío de un mensaje de correo, que le permite visualizar de forma instantánea las imágenes que muestran la información de cualquier terremoto de su interés. ABSTRACT This study is aimed at real-time monitoring of both near and distant seismic activityfrom the seismic data recorded by a broadband seismic station, and the development of an interactive broadcast system of updated information of earthquakes, for the general public. Bothsources of information are displayed through a display unit called "Interactive Seismic Monitor". The seismic data recording is carried out by using the three-component sensor of the GUD seismic station, which belongs to the Digital Network Broadband and digital broadcast of the National Geographic Institute, housed in the Basilica of The Valley of the Fallen, in the town of Guadarrama (Madrid). A computer with Internet connection has been installed in E.T.S.I. Surveying, Geodesy and Cartography for receiving and storing data, together with Scream and Drumplot programs, developed by Guralp, which are necessary for monitoring the real time seismic signal. Based on the data collected, through programming applications developed under Linux system and using the software tools provided by the SAC (Seismic Analysis Code), a chart recorder and an animated gif image of the segmentation for each event are also generated. A mail server and a mail account have been configured for the receipt of two types of email messages, sent from the National Geographic Institute head office, with the information of the events recorded by GUD after being reviewed: - Messages sent daily, providing a list of events in the past 30 days. - Messages containing information on near real-time seismic of the last seismic alert. A program called "saco" has also been developed for handling mail received that analyzes the seismic data, which stores it in files and runs drawing applications on them. These applications have been previously developed under Linux system and software programming GMT (Generic Mapping Tools), and from them different images that are displayed on the Seismic Monitor are automatically generated: a near seismicity Iberian peninsula map, a distant seismicity world map, a detailed map to locate and represent the last seismic alert generated, the lists with the information of the events depicted in the maps,together with the charts and the animated gif image of such seismograms. Interactive Seismic Monitor has been developed to offer any user the possibility of interacting with the display unit: a database has been created for scientific use which stores all the events recorded by GUD. Thus, any user could make a request, by sending an e-mail that allows them to view instantly all the images showing the information of any earthquake of interest on the display unit.

Distributed www programming using (Ciao-) prolog and the pillow library

We discuss from a practical point of view a number of ssues involved in writing distributed Internet and WWW applications using LP/CLP systems. We describe PiLLoW, a publicdomain Internet and WWW programming library for LP/CLP systems that we have designed in order to simplify the process of writing such applications. PiLLoW provides facilities for accessing documents and code on the WWW; parsing, manipulating and generating HTML and XML structured documents and data; producing HTML forms; writing form handlers and CGI-scripts; and processing HTML/XML templates. An important contribution of PÍ'LLOW is to model HTML/XML code (and, thus, the content of WWW pages) as terms. The PÍ'LLOW library has been developed in the context of the Ciao Prolog system, but it has been adapted to a number of popular LP/CLP systems, supporting most of its functionality. We also describe the use of concurrency and a highlevel model of client-server interaction, Ciao Prolog's active modules, in the context of WWW programming. We propose a solution for client-side downloading and execution of Prolog code, using generic browsers. Finally, we also provide an overview of related work on the topic.

WWW Programming using computational logic systems (and the PiLLoW/Ciao library)

We discuss from a practical point of view a number of issues involved in writing Internet and WWW applications using LP/CLP systems. We describe Pd_l_oW, a public-domain Internet and WWW programming library for LP/CLP systems which we argüe significantly simplifies the process of writing such applications. Pd_l_oW provides facilities for generating HTML structured documents, producing HTML forms, writing form handlers, accessing and parsing WWW documents, and accessing code posted at HTTP addresses. We also describe the architecture of some application classes, using a high-level model of client-server interaction, active modules. We then propose an architecture for automatic LP/CLP code downloading for local execution, using generic browsers. Finally, we also provide an overview of related work on the topic. The PiLLoW library has been developed in the context of the &- Prolog and CIAO systems, but it has been adapted to a number of popular LP/CLP systems, supporting most of its functionality.

The PiLLoW/Ciao library for INTERNET/WWW programming using computational logic systems

We discuss from a practical point of view a number of issues involved in writing Internet and WWW applications using LP/CLP systems. We describe PiLLoW, an Internet and WWW programming library for LP/CLP systems which we argüe significantly simplifies the process of writing such applications. PiLLoW provides facilities for generating HTML structured documents, producing HTML forms, writing form handlers, accessing and parsing WWW documents, and accessing code posted at HTTP addresses. We also describe the architecture of some application classes, using a high-level model of client-server interaction, active modules. Finally we describe an architecture for automatic LP/CLP code downloading for local execution, using generic browsers. The PiLLoW library has been developed in the context of the &-Prolog and CIAO systems, but it has been adapted to a number of popular LP/CLP systems, supporting most of its functionality.

Implementing distributed concurrent constraint execution in the CIAO system

This paper describes the current prototype of the distributed CIAO system. It introduces the concepts of "teams" and "active modules" (or active objects), which conveniently encapsulate different types of functionalities desirable from a distributed system, from parallelism for achieving speedup to client-server applications. The user primitives available are presented and their implementation described. This implementation uses attributed variables and, as an example of a communication abstraction, a blackboard that follows the Linda model. Finally, the CIAO WWW interface is also briefly described. The unctionalities of the system are illustrated through examples, using the implemented primitives.

Distributed concurrent constraint execution in the CIAO system

This paper describes the current prototype of the distributed CIAO system. It introduces the concepts of "teams" and "active modules" (or active objects), which conveniently encapsulate different types of functionalities desirable from a distributed system, from parallelism for achieving speedup to client-server applications. It presents the user primitives available and describes their implementation. This implementation uses attributed variables and, as an example of a communication abstraction, a blackboard that follows the Linda model. The functionalities of the system are illustrated through examples, using the implemented primitives. The implementation of most of the primitives is also described in detail.

Recommender system for sport videos based on user audiovisual consumption

This paper describes a recommender system for sport videos, transmitted over the Internet and/or broadcast, in the context of large-scale events, which has been tested for the Olympic Games. The recommender is based on audiovisual consumption and does not depend on the number of users, running only on the client side. This avoids the concurrence, computation and privacy problems of central server approaches in scenarios with a large number of users, such as the Olympic Games. The system has been designed to take advantage of the information available in the videos, which is used along with the implicit information of the user and the modeling of his/her audiovisual content consumption. The system is thus transparent to the user, who does not need to take any specific action. Another important characteristic is that the system can produce recommendations for both live and recorded events. Testing has showed advantages compared to previous systems, as will be shown in the results.

A linear chained approach for service invocation in IP multimedia subsystem.

IP Multimedia Subsystem (IMS) is considered to provide multimedia services to users through an IP-based control plane. The current IMS service invocation mechanism, however, requires the Serving-Call Session Control Function (S-CSCF) invokes each Application Server (AS) sequentially to perform service subscription pro?le, which results in the heavy load of the S-CSCF and the long session set-up delay. To solve this issue, this paper proposes a linear chained service invocation mechanism to invoke each AS consecutively. By checking all the initial Filter Criteria (iFC) one-time and adding the addresses of all involved ASs to the ?Route? header, this new approach enables multiple services to be invoked as a linear chain during a session. We model the service invocation mechanisms through Jackson networks, which are validated through simulations. The analytic results verify that the linear chained service invocation mechanism can effectively reduce session set-up delay of the service layer and decrease the load level of the S-CSCF