Root colonization and interaction among growth promoting rhizobacteria isolates and eucalypts species

This work aimed to evaluate root colonization and interaction among isolates of rhizobacteria and eucalypt species. The method used to evaluate "in vitro" root colonization was able to indicate if the effect was benefic or deleterious allowing to pre-select isolates as potential growth promoter. There was interaction among isolates of rhizobacteria and Eucalyptus species for seed germinating and seedling growth. MF2 (Pseudomonas sp.) was the best rhizobacteria isolate for growth promotion of E. cloeziana e E. grandis. S1 (Bacillus subtilis) was the most effective for E. globulus, and Ca (Pseudomonas fulva), MF2 (Pseudomonas sp.), CIIb (Stenotrophomonas maltophilia) and S2 (B. subtilis) were the most promising isolates for the E. urophylla.

MODELING AND SIMULATION OF RELIEF INFLUENCE ON EUCALYPTUS FORESTS: INTERACTION BETWEEN SOLAR IRRADIANCE AND PRODUCTIVITY

ABSTRACT This study aimed to verify the differences in radiation intensity as a function of distinct relief exposure surfaces and to quantify these effects on the leaf area index (LAI) and other variables expressing eucalyptus forest productivity for simulations in a process-based growth model. The study was carried out at two contrasting edaphoclimatic locations in the Rio Doce basin in Minas Gerais, Brazil. Two stands with 32-year-old plantations were used, allocating fixed plots in locations with northern and southern exposure surfaces. The meteorological data were obtained from two automated weather stations located near the study sites. Solar radiation was corrected for terrain inclination and exposure surfaces, as it is measured based on the plane, perpendicularly to the vertical location. The LAI values collected in the field were used. For the comparative simulations in productivity variation, the mechanistic 3PG model was used, considering the relief exposure surfaces. It was verified that during most of the year, the southern surfaces showed lower availability of incident solar radiation, resulting in up to 66% losses, compared to the same surface considered plane, probably related to its geographical location and higher declivity. Higher values were obtained for the plantings located on the northern surface for the variables LAI, volume and mean annual wood increase, with this tendency being repeated in the 3PG model simulations.

Using an aerial system of remote sensing to detect different nutritional status in Brachiaria decumbens

The aim of this study was to use digital images acquired by cameras attached to a helium balloon to detect variation of the nutritional status in Brachiaria decumbens. The treatments consisted of five doses of nitrogen (0, 50, 100, 150 e 200kg ha-1) with six replications each, evaluated in a completely randomized statistical design. A remote sensing system composed of digital cameras and microcomputers was used for image acquisition, and a helium balloon lifted the cameras to the heights of 15, 20, 25 and 30m. A portable chlorophyll meter and analyses of leaf nitrogen content were used to make comparisons with data obtained by the remote sensing system. Data was acquired in two phases, in different climatic conditions. At the end of each phase, dry matter production was measured. Three vegetation indices were used to evaluate the detection of different nutritional status. The three indices were able to detect the effects of N doses. The indices constructed with the Green spectral band showed to be more efficient.

Geostatistics and remote sensing methods in the classification of images of areas cultivated with citrus

This study compares the precision of three image classification methods, two of remote sensing and one of geostatistics applied to areas cultivated with citrus. The 5,296.52ha area of study is located in the city of Araraquara - central region of the state of São Paulo (SP), Brazil. The multispectral image from the CCD/CBERS-2B satellite was acquired in 2009 and processed through the Geographic Information System (GIS) SPRING. Three classification methods were used, one unsupervised (Cluster), and two supervised (Indicator Kriging/IK and Maximum Likelihood/Maxver), in addition to the screen classification taken as field checking.. Reliability of classifications was evaluated by Kappa index. In accordance with the Kappa index, the Indicator kriging method obtained the highest degree of reliability for bands 2 and 4. Moreover the Cluster method applied to band 2 (green) was the best quality classification between all the methods. Indicator Kriging was the classifier that presented the citrus total area closest to the field check estimated by -3.01%, whereas Maxver overestimated the total citrus area by 42.94%.

Pragmatic competence of Finnish learners of English: Meaning in interaction in secondary and upper secondary schools

Tutkin pro gradu -tutkielmassani englannin kielen oppijoiden pragmaattista kompetenssia. Tarkoitukseni oli selvittää, miten suomalaiset yläkoululaiset ja lukiolaiset osaavat käyttää englannin kieltä erilaisissa kommunikaatiotilanteissa. Tutkielmani voidaan sijoittaa välikielen pragmatiikan tutkimukseen. Halusin selvittää, millä tasolla suomalaisten oppijoiden pragmaattinen kompetenssi on ja kehittyykö se yläkoulun ja lukion välillä. Lisäksi tutkin, vaikuttavatko oppimisympäristö ja oppimismahdollisuudet oppijoiden kykyyn käyttää englannin kieltä. Toisin sanoen vertasin englantipainotteisilla luokilla olevia oppilaita formaalin opetuksen oppijoihin sekä tutkin, vaikuttavatko englanninkieliset vapaa-ajan aktiviteetit ja oppijoiden mahdolliset oleskelut englanninkielisissä maissa heidän pragmaattiseen kompetenssiinsa. Tutkimukseni kohderyhmä koostui yläkoulun kahdeksasluokkalaisista ja lukion toisen vuosikurssin opiskelijoista. Testasin neljä eri ryhmää, joissa oli sekä formaalissa opetuksessa olevia oppijoita (yksi ryhmä kahdeksasluokkalaisia ja yksi ryhmä toisen vuosikurssin opiskelijoita) että kielipainotteisten luokkien oppijoita (yksi ryhmä kahdeksasluokkalaisia ja yksi ryhmä toisen vuosikurssin opiskelijoita). Arvioin kohderyhmäni pragmaattista kompetenssia monivalintatestillä, jossa testattiin oppijoiden kykyä käyttää ja ymmärtää implikaatioita, tilannekohtaisia rutiineja sekä puheakteja. Taustakysymysten avulla selvitin, kuinka usein oppijat käyttivät englantia vapaa-aikanaan ja olivatko he vierailleet englanninkielisissä maissa. Tutkimustulokseni osoittavat, että suomalaisten yläkoululaisten ja lukiolaisten pragmaattinen kompetenssi oli korkea. Pragmaattinen kompetenssi kehittyi kahdeksasluokkalaisten ja lukion toisen vuosikurssin välillä. Kehitys oli suurempaa formaalissa opetuksessa kuin kielipainotteisilla luokilla. Englantipainotteisilla luokilla olevat oppilaat suoriutuivat testistä paremmin kuin formaalin opetuksen oppilaat. Tosin erot olivat tilastollisesti merkitseviä vain yläkoulussa. Tutkimuksessani siis päättelin, että vieraskielinen opetus vaikutti enemmän nuorempiin oppijoihin. Eri oppimismahdollisuudet osoittautuivat haastaviksi analysoida. Tulokset osoittivat, että vain englanninkielisessä maassa oleskelulla oli vaikutusta oppijoiden pragmaattiseen kompetenssiin. Kysyttäessä vapaa-ajan aktiviteettien merkitystä oppijat kuitenkin kertoivat, että ne auttoivat heitä testiin vastaamisessa enemmän kuin englanninopetuksessa käydyt asiat. Kouluissa tulisikin jatkossa painottaa yhä enemmän vuorovaikutteista kieltenopetusta.

Interaction with industrial customers from a project selling company's perspective

This thesis studied the issue of interaction in industrial buyer-seller relationships. The aim of the thesis was to study the interaction from the seller’s perspective, especially from a project selling company’s perspective. The purpose of the thesis was to offer suggestions for the case company on how to improve interaction. The theoretical part of the study introduced the interaction framework of buyer-seller interaction, and the concept of interaction mechanisms. The focus was on studying the seller’s ways and means to utilize the interaction mechanisms. A case study research was conducted in the empirical part of the study, in which interaction in the case company was observed at a general level and through three different projects. The case company of the study was a project selling company. The case study data was gathered through individual interviews. Content Analysis was used as a research method for analyzing the case study data. Based on the case study findings, the results were drawn. The results indicated what should be done, in order to develop interaction in the case company. Finally, suggestions were provided for the case company on how to improve interaction, and a suggested interaction model was established for the case company. Although the thesis studied the topic from the viewpoint of only one specific company, it also offers outlook for other seller companies to improve their interaction.

Characterisation of Laser Beam and Paper Material Interaction

It is known already from 1970´s that laser beam is suitable for processing paper materials. In this thesis, term paper materials mean all wood-fibre based materials, like dried pulp, copy paper, newspaper, cardboard, corrugated board, tissue paper etc. Accordingly, laser processing in this thesis means all laser treatments resulting material removal, like cutting, partial cutting, marking, creasing, perforation etc. that can be used to process paper materials. Laser technology provides many advantages for processing of paper materials: non-contact method, freedom of processing geometry, reliable technology for non-stop production etc. Especially packaging industry is very promising area for laser processing applications. However, there are only few industrial laser processing applications worldwide even in beginning of 2010´s. One reason for small-scale use of lasers in paper material manufacturing is that there is a shortage of published research and scientific articles. Another problem, restraining the use of laser for processing of paper materials, is colouration of paper material i.e. the yellowish and/or greyish colour of cut edge appearing during cutting or after cutting. These are the main reasons for selecting the topic of this thesis to concern characterization of interaction of laser beam and paper materials. This study was carried out in Laboratory of Laser Processing at Lappeenranta University of Technology (Finland). Laser equipment used in this study was TRUMPF TLF 2700 carbon dioxide laser that produces a beam with wavelength of 10.6 μm with power range of 190-2500 W (laser power on work piece). Study of laser beam and paper material interaction was carried out by treating dried kraft pulp (grammage of 67 g m-2) with different laser power levels, focal plane postion settings and interaction times. Interaction between laser beam and dried kraft pulp was detected with different monitoring devices, i.e. spectrometer, pyrometer and active illumination imaging system. This way it was possible to create an input and output parameter diagram and to study the effects of input and output parameters in this thesis. When interaction phenomena are understood also process development can be carried out and even new innovations developed. Fulfilling the lack of information on interaction phenomena can assist in the way of lasers for wider use of technology in paper making and converting industry. It was concluded in this thesis that interaction of laser beam and paper material has two mechanisms that are dependent on focal plane position range. Assumed interaction mechanism B appears in range of average focal plane position of 3.4 mm and 2.4 mm and assumed interaction mechanism A in range of average focal plane position of 0.4 mm and -0.6 mm both in used experimental set up. Focal plane position 1.4 mm represents midzone of these two mechanisms. Holes during laser beam and paper material interaction are formed gradually: first small hole is formed to interaction area in the centre of laser beam cross-section and after that, as function of interaction time, hole expands, until interaction between laser beam and dried kraft pulp is ended. By the image analysis it can be seen that in beginning of laser beam and dried kraft pulp material interaction small holes off very good quality are formed. It is obvious that black colour and heat affected zone appear as function of interaction time. This reveals that there still are different interaction phases within interaction mechanisms A and B. These interaction phases appear as function of time and also as function of peak intensity of laser beam. Limit peak intensity is the value that divides interaction mechanism A and B from one-phase interaction into dual-phase interaction. So all peak intensity values under limit peak intensity belong to MAOM (interaction mechanism A one-phase mode) or to MBOM (interaction mechanism B onephase mode) and values over that belong to MADM (interaction mechanism A dual-phase mode) or to MBDM (interaction mechanism B dual-phase mode). Decomposition process of cellulose is evolution of hydrocarbons when temperature is between 380- 500°C. This means that long cellulose molecule is split into smaller volatile hydrocarbons in this temperature range. As temperature increases, decomposition process of cellulose molecule changes. In range of 700-900°C, cellulose molecule is mainly decomposed into H2 gas; this is why this range is called evolution of hydrogen. Interaction in this range starts (as in range of MAOM and MBOM), when a small good quality hole is formed. This is due to “direct evaporation” of pulp via decomposition process of evolution of hydrogen. And this can be seen can be seen in spectrometer as high intensity peak of yellow light (in range of 588-589 nm) which refers to temperature of ~1750ºC. Pyrometer does not detect this high intensity peak since it is not able to detect physical phase change from solid kraft pulp to gaseous compounds. As interaction time between laser beam and dried kraft pulp continues, hypothesis is that three auto ignition processes occurs. Auto ignition of substance is the lowest temperature in which it will spontaneously ignite in a normal atmosphere without an external source of ignition, such as a flame or spark. Three auto ignition processes appears in range of MADM and MBDM, namely: 1. temperature of auto ignition of hydrogen atom (H2) is 500ºC, 2. temperature of auto ignition of carbon monoxide molecule (CO) is 609ºC and 3. temperature of auto ignition of carbon atom (C) is 700ºC. These three auto ignition processes leads to formation of plasma plume which has strong emission of radiation in range of visible light. Formation of this plasma plume can be seen as increase of intensity in wavelength range of ~475-652 nm. Pyrometer shows maximum temperature just after this ignition. This plasma plume is assumed to scatter laser beam so that it interacts with larger area of dried kraft pulp than what is actual area of beam cross-section. This assumed scattering reduces also peak intensity. So result shows that assumably scattered light with low peak intensity is interacting with large area of hole edges and due to low peak intensity this interaction happens in low temperature. So interaction between laser beam and dried kraft pulp turns from evolution of hydrogen to evolution of hydrocarbons. This leads to black colour of hole edges.

Critical aspects on the behavior of material from the mechanical tool-workpiece interaction in single point diamond turning

Some material aspects such as grain size, purity and anisotropy exert an important influence on surface quality, especially in single point diamond turning. The aim of this paper is to present and discuss some critical factors that can limit the accuracy of ultraprecision machining of non-ferrous metals and to identify the effects of them on the cutting mechanism with single point diamond tools. This will be carried out through observations of machined surfaces and chips produced using optical and scanning electron microscopy. Solutions to reduce the influence of some of these limiting factors related with the mechanism of generation of mirror-like surfaces will be discussed.

Effect of wave frequency on the nonlinear interaction between Görtler vortices and three-dimensional Tollmien-Schlichting waves

The nonlinear interaction between Görtler vortices (GV) and three-dimensional Tollmien-Schlichting (TS) waves nonlinear interaction is studied with a spatial, nonparallel model based on the Parabolized Stability Equations (PSE). In this investigation the effect of TS wave frequency on the nonlinear interaction is studied. As verified in previous investigations using the same numerical model, the relative amplitudes and growth rates are the dominant parameters in GV/TS wave interaction. In this sense, the wave frequency influence is important in defining the streamwise distance traveled by the disturbances in the unstable region of the stability diagram and in defining the amplification rates that they go through.

Bubble-Bubble Interaction in Horizontal Two-Phase Slug Flow

Modelling of the slug structure requires a new effort on fundamental research. To clarify some aspects of the horizontal slug flow, an experimental study of the behaviour of two isolated bubbles in a single-phase liquid flow was performed. This procedure was adopted to avoid the overlap of different phenomena induced by a train of long bubbles. The experimental facility consists of a 90-m horizontal PVC pipe with internal diameter of 0,053 m. The behaviour of two single air bubbles travelling in a water flow was studied. Focus was given on the influence of the distance between the bubbles on the velocity of the second bubble. This study allows the understanding of the mechanism of overtaking that takes place right after the slug formation and that precedes the coalescence of bubbles in a slug flow. The results show that bubbles placed behind a liquid slug smaller than a critical value move faster than the leading one. Otherwise, they move slower than the leading one.

Modeling of the Fluid-Structure Interaction in Inelastic Piping Systems

In many engineering applications, compliant piping systems conveying liquids are subjected to inelastic deformations due to severe pressure surges such as plastic tubes in modern water supply transmission lines and metallic pipings in nuclear power plants. In these cases the design of such systems may require an adequate modeling of the interactions between the fluid dynamics and the inelastic structural pipe motions. The reliability of the prediction of fluid-pipe behavior depends mainly on the adequacy of the constitutive equations employed in the analysis. In this paper it is proposed a systematic and general approach to consistently incorporate different kinds of inelastic behaviors of the pipe material in a fluid-structure interaction analysis. The main feature of the constitutive equations considered in this work is that a very simple numerical technique can be used for solving the coupled equations describing the dynamics of the fluid and pipe wall. Numerical examples concerning the analysis of polyethylene and stainless steel pipe networks are presented to illustrate the versatility of the proposed approach.

Open innovation: university-industry interaction in Russia

Innovation nowadays is one of the key elements of counties’ competitiveness. In the face of continuous world economic changes, open innovation business model implementation allows many companies to improve and accelerate their innovation processes through collaboration. Universities as traditional sources of knowledge might be involved in such kind of collaboration. In developing countries, which are in transition towards innovation-based economy, as Russia, open innovation business model can serve as a tool to speed up this transition. The Master’s Thesis explores the implementation of open innovation model in collaboration between companies and universities in global scale and particularly in Russia. The study is qualitative and it is based on integrative analysis of literature, secondary data and results of the survey, conducted among Russian universities. In the thesis a model for implementation of open innovation into Triple Helix model is elaborated. The study also explores not very common practice of reverse-directional interaction - from industry to university. The findings of this research show a necessity of solving the identified problems in parallel with implementation of open innovation concept in university-industry collaboration.

An interaction framework for deploying the knowledge of diasporas: Using Finland as an example

This study discusses the importance of diasporas’ knowledge with regard to the national competitive advantage of Finland. The purpose of this study is to suggest an interaction framework, which illustrates how diasporas can benefit the host country via intentional knowledge spillovers, with two sub-objectives: to seek which features are crucial for productive interaction between a host government and diasporas, and to scrutinize the modes of interaction currently effective in Finland. The theoretical background of the study consists of literature relating to the concepts of diaspora and knowledge. The empirical research conducted for this study is based on expert interviews. The interview data was collected between September and November 2013. Eight interviews were made; five with representatives of expert organizations, and three with immigrants. Thematic analysis was used to categorize and interpret the interview data. In addition, thematic networks were built to act as a basis of analysis. This study finds that knowledge, especially new combinations of knowledge, is a significant input in innovation. Innovation is found to be the basis of national competitive advantage. Thus the means through which knowledge is transferred are of key importance. Diasporas are found a good source of new knowledge, and thus may aid the innovative process. Host country stance and policy are found to have a major impact on the ability of the host country to benefit from diasporas’ knowledge. As a host country, this study finds Finland to have a very fragmented strategy field and a prejudiced attitude, which currently make it difficult to utilize the potential of diasporas. The interaction framework based on these findings suggests ways in which Finland can improve its national competitive advantage through acquiring the innovative potential of diasporas. Strategy revision and increased promotion are discussed as means towards improved interaction. In addition, the importance of learning is emphasized. The findings of this study enhance understanding of the relationship between the concepts of diaspora and knowledge. In addition, this study ties the relationship to economic benefit. Future research is, however, necessary in order to fully understand the meaning of the relationship, as well as to increase understanding of the generalizability of the interaction framework.

Culture in business interaction: an individual perspective : empirical studies in Finnish-Russian business relationships

The main objective of this doctoral dissertation is to reach a holistic and indepth understanding of the intercultural interaction within dyadic business relationships through the perspective of individual managers. The empirical setting is dyadic business relationships between Russian and Finnish firms in construction and engineering industries. The motivation for the study mainly arose from: 1) the lack of business marketing literature considering cultural and individual perspectives; 2) the need to find ways to study intercultural issues in business relationships, other than through the application of models derived from the work of Hofstede (1980). The study consists of two parts, an introductory essay containing the research objectives, theoretical foundations, methodological choices, limitations and contributions, and original research articles. The four articles each address a sub-objective: 1) to develop an understanding of intercultural business relationships development, cultural adaptation, and its role in the development of trust (Article 1); 2) to develop an appropriate methodological framework for studying business interaction from a cultural and individual perspective (Article 2); 3) to develop an understanding of the role of culture in individual manager’s sensemaking of interaction events in business relationships (Article 3); and 4) to develop an appropriate theoretical framework for studying interactive intercultural business relationships in international industrial markets (Article 4). The ontological and epistemological foundations are built on the interpretivist/ social constructivist view of reality. Interaction, in this study, is seen as being conducted between individuals, who are the key representative actors of their firms. In turn, culture is regarded both as an independent context existing prior to the individuals’ participation in it, and as knowledge incorporated by the individuals, who use it in sensemaking and interaction across cultures. The methods applied in the articles are: an interpretive qualitative study (Article 1), a literature review and conceptual analysis (Article 2), a structural analysis of the narratives and a metaphor analysis (Article 3), and a literature review and conceptual analysis (Article 4). The main contributions are the following. First, it contributes to business marketing literature by developing the theoretical, conceptual, and methodological underpinning of IMP theories in relation to culture. Second, the thesis contributes to the growing literature on managerial sensemaking in industrial markets by looking at it from a cultural perspective, as well as emphasizing the importance of figurative language in cultural sensemaking.