Polymorphous Si thin films from radio frequency plasmas of SiH4 diluted in Ar: A study by transmission electron microscopy and Raman spectroscopy

In this study, we present a detailed structural characterization by means of transmission electron microscopy and Raman spectroscopy of polymorphous silicon (pm-Si:H) thin films deposited using radio-frequency dust-forming plasmas of SiH4 diluted in Ar. Square-wave modulation of the plasma and gas temperature was varied to obtain films with different nanostructures. Transmission electron microscopy and electron diffraction have shown the presence of Si crystallites of around 2 nm in the pm-Si:H films, which are related to the nanoparticles formed in the plasma gas phase coming from their different growth stages, named particle nucleation and coagulation. Raman scattering has proved the role of the film nanostructure in the crystallization process induced ¿in situ¿ by laser heating.

Hydrodynamic fluctuations in fluids under external gradients

Temperature and velocity correlation functions in a fluid subjected to conditions creating both a temperature and a velocity gradient are computed up to second order in the gradients. Temperature and velocity fluctuations are coupled due to convection and viscous heating. When the viscosity goes to infinity one gets the temperature correlation function for a solid under a temperature gradient, which contains a long-ranged contribution, quadratic in the temperature gradient. The velocity correlation function also exhibits long-range behavior. In a particular case its equilibrium term is diagonal whereas the nonequilibrium correction contains nondiagonal terms.

Iowa Energy Savings Guide Saving Energy Saves You Money, 2003

This guide describes things you can do around your home to reduce your utility bills and save you money. It offers some easy, practical steps that you can take to save energy and reduce the cost of heating and cooling your home. There are also tips on ways to reduce your electric and water usage. In addition, energy related health and safety information is also included. So, take a few minutes to read this guide and save it so you can refer to it in the future.

Home Tightening, Insulation and Ventilation, 2011

The average Iowa family spends more than half of its annual household energy bill on heating and cooling. That’s a significant number, but you can dramatically reduce these costs—up to 20 percent, according to ENERGY STAR®—by making some simple energy-saving weatherization and insulation improvements to your home. In addition—with a little attention to proper ventilation—you can protect your home from moisture damage year-round, reduce problems caused by ice dams on the roof during the winter and significantly cut summer cooling costs. As a bonus, these projects can extend the life of your home and may increase the resale value of your property. If you like to fix things around the house, you can handle many of the projects suggested in this book and make the most of your energy-improvement budget. However, don’t hesitate to call a professional for help if you’d rather not do the work yourself; the dollars gained through energy savings in upcoming years will be worth the expense.

MERCURY QUANTIFICATION IN SOILS USING THERMAL DESORPTION AND ATOMIC ABSORPTION SPECTROMETRY: PROPOSAL FOR AN ALTERNATIVE METHOD OF ANALYSIS

Despite the considerable environmental importance of mercury (Hg), given its high toxicity and ability to contaminate large areas via atmospheric deposition, little is known about its activity in soils, especially tropical soils, in comparison with other heavy metals. This lack of information about Hg arises because analytical methods for determination of Hg are more laborious and expensive compared to methods for other heavy metals. The situation is even more precarious regarding speciation of Hg in soils since sequential extraction methods are also inefficient for this metal. The aim of this paper is to present a technique of thermal desorption associated with atomic absorption spectrometry, TDAAS, as an efficient tool for quantitative determination of Hg in soils. The method consists of the release of Hg by heating, followed by its quantification by atomic absorption spectrometry. It was developed by constructing calibration curves in different soil samples based on increasing volumes of standard Hg2+ solutions. Performance, accuracy, precision, and quantification and detection limit parameters were evaluated. No matrix interference was detected. Certified reference samples and comparison with a Direct Mercury Analyzer, DMA (another highly recognized technique), were used in validation of the method, which proved to be accurate and precise.

Evauation of Recycled Asphalt Concrete Pavements: Final Report for Kossuth County, Iowa, HR-1888, February 1980

After some success with a small asphalt pavement recycling project in 1975, Kossuth County, Iowa programmed a much larger undertaking during the 1976 construction season. The work performed in 1975 indicated that a quality product could be produced with some modifications to conventional equipment. As anticipated , the major problem encountered was the excessive air pollution created during the heating and mixing process. As part of its 1976 road program, Kossuth County developed plans for recycling sixteen miles of existing asphalt pavements using the "hot mix" recycling process. One project, ten miles in length, was selected by the Federal Highway Authority as part of "Demonstration Project No. 39, Recycling Asphalt Pavements." The FHWA provided a $29,500 grant t o the project to be used for project testing and evaluation. Cooperation and input into the work proposed for 1976 was received from many sources. The people and organizations contributing were the Federal Highway Authority, the Iowa Department of Environmental Quality, the Federal Environmental Protection Agency, several contractors, and personnel from the Kossuth County Engineer's Office.

Feedback control of unstable cellular solidification fronts

We present a feedback control scheme to stabilize unstable cellular patterns during the directional solidification of a binary alloy. The scheme is based on local heating of cell tips which protrude ahead of the mean position of all tips in the array. The feasibility of this scheme is demonstrated using phase-field simulations and, experimentally, using a real-time image processing algorithm, to track cell tips, coupled with a movable laser spot array device to heat the tips locally. We demonstrate, both numerically and experimentally, that spacings well below the threshold for a period-doubling instability can be stabilized. As predicted by the numerical calculations, cellular arrays become stable with uniform spacing through the feedback control which is maintained with minimal heating.

Tectonic subsidence of the Lomonosov Ridge

The Cenozoic sedimentary record revealed by the Integrated Ocean Drilling Program's Arctic Coring Expedition (ACEX) to the Lomonosov Ridge microcontinent in 2004 is characterized by an unconformity attributed to the period 44-18 Ma. According to conventional thermal kinematic models, the microcontinent should have subsided to >1 km depth owing to rifting and subsequent separation from the Barents-Kara Sea margin at 56 Ma. We propose an alternative model incorporating a simple pressure-temperature (P-T) relation for mantle density. Using this model, we can explain the missing stratigraphic section by post-breakup uplift and erosion. The pattern of linear magnetic anomalies and the spreading geometry imply that the generation of oceanic crust in the central Eurasia Basin could have been restricted and confined by non-volcanic thinning of the mantle lithosphere at an early stage (ca. 56-40 Ma). In response to a rise in temperature, the mantle mineral composition may have changed through breakdown of spinet peridotite and formation of less dense plagioclase peridotite. The consequence of lithosphere heating and related mineral phase transitions would be post-breakup uplift followed by rapid subsidence to the deep-water environment observed on the Lomonosov Ridge today.

Nouveaux modes de consommation du tabac et de la nicotine [New modes of tobacco and nicotine use]

New ways of consuming tobacco or nicotine have recently been developed attracting smokers not only because of their novelty but also because they hope that it will decrease their health risks or will help them in smoking banned places. The objective of this paper is to review the current state of knowledge concerning the waterpipe, oral tobacco, nasal snuff, the electronic cigarette and tobacco heating devices. Although some products seem less harmful than cigarettes, we cannot encourage people to use them because we still do not have sufficient scientific data regarding their safety. Moreover, most of these products are addictive and we still do not know if they will play a role in harm reduction.

Heated Optical Fiber for Distributed Soil-Moisture Measurements: A Lysimeter Experiment

An Actively Heated Fiber Optics (AHFO) method to estimate soil moisture is tested and the analysis technique improved on. The measurements were performed in a lysimeter uniformly packed with loam soil with variable water content profiles. In the first meter of the soil profi le, 30 m of fiber optic cable were installed in a 12 loops coil. The metal sheath armoring the fiber cable was used as an electrical resistance heater to generate a heat pulse, and the soil response was monitored with a Distributed Temperature Sensing (DTS) system. We study the cooling following three continuous heat pulses of 120 s at 36 W m(-1) by means of long-time approximation of radial heat conduction. The soil volumetric water contents were then inferred from the estimated thermal conductivities through a specifically calibrated model relating thermal conductivity and volumetric water content. To use the pre-asymptotic data we employed a time correction that allowed the volumetric water content to be estimated with a precision of 0.01-0.035 (m(3) m(-3)). A comparison of the AHFO measurements with soil-moisture measurements obtained with calibrated capacitance-based probes gave good agreement for wetter soils [discrepancy between the two methods was less than 0.04 (m(3) m(-3))]. In the shallow drier soils, the AHFO method underestimated the volumetric water content due to the longertime required for the temperature increment to become asymptotic in less thermally conductive media [discrepancy between the two methods was larger than 0.1 (m(3) m(-3))]. The present work suggests that future applications of the AHFO method should include longer heat pulses, that longer heating and cooling events are analyzed, and, temperature increments ideally be measured with higher frequency.

First aid in burn injuries with counterintuitive warm water improves outcome

Objective: Cooling is considered a panacea in burn injury. However, burn injuries are characterized by an ischemic zone prone to progression, a phenomenon that can substantially increase morbidity. Cold-induced vasoconstriction potentially aggravates ischemia and promotes progression. Therefore we compared the effect of warm (37°C) and cold (17°C) water on burn progression. Methods: The comb burn model creates 4 rectangular burned surfaces separated by 3 unburned interspaces that become necrotic if untreated. After heating in boiling water the template was applied for 60 seconds on 24 Wistar rats randomized into 3 groups: no treatment (CON); treatment for 20 minutes with cold water (17°C: CW) or warm water (37°C: WW). Burn progression in surface (planimetry) and Departmenth (histology), as well as microcirculatory perfusion (laser Doppler flowmetry) were assessed after 1h, as well as 1, 4, and 7 days. Results: Both CW and WW delayed burn progression without reducing the final burn Departmenth (deep dermis). In contrast, only WW but not CW increased dermal perfusion (81 ± 2% (WW) vs. 62 ± 2% (CW) and 63 ± 1% (CON), p< 0·05) already 1 hour after burn induction. The difference observed after one hour led to a complete flow recovery during the observation period and translated into increased interspace survival, respectively less necrosis with WW(65 ± 4% vs. 81 + 4% (CW) and 91 ± 2% (CON), p< 0·05) after 7 days. Conclusions: Application of warm water significantly improved dermal perfusion, increased interspace survival, and delayed burn progression.However it didn't alter the ultimate burn Departmenth of the actually burned area. Therefore, warm water can create a therapeutic window for targeted nonsurgical treatment of burn progression.

Benthic macroinvertebrates assemblages and macrohabitat connectivity in Mediterranean-climate streams of northern California

Abstract. Drought leads to a loss of longitudinal and lateral hydrologic connectivity, which causes direct or indirect changes in stream ecosystem properties. Changes in macrohabitat availability from a rifflepool sequence to isolated pools are among the most conspicuous consequences of connectivity loss. Macroinvertebrate assemblages were compared among 3 distinct stream macrohabitats (riffles [R], pools connected to riffles [Pc], disconnected pools [Pd]) of 19 Mediterranean-climate sites in northern California to examine the influence of loss of habitat resulting from drought disturbance. At the time of sampling, 10 sites were perennial and included R and Pc macrohabitats, whereas 9 sites were intermittent and included only Pd macrohabitats. Taxa richness was more variable in Pd, and taxa richness was significantly lower in Pd than in Pc but not R. These results suggested a decline in richness between Pc and Pd that might be associated with loss of connectivity. Lower Ephemeroptera, Plecoptera, and Trichoptera (EPT) richness relative to Odonata, Coleoptera, and Heteroptera (OCH) richness was observed for Pd than R and Pc macrohabitats. Family composition was more similar between R and Pc than between R or Pc and Pd macrohabitats. This similarity may be associated with greater connectivity between R and Pc macrohabitats. Correspondence analysis indicated that macroinvertebrate composition changed along a gradient from R to Pc and Pd that was related to a perennialintermittent gradient across sites. High variability among macroinvertebrate assemblages in Pd could have been related to variability in the duration of intermittency. In cluster analysis, macroinvertebrate assemblages were grouped by macrohabitat first and then by site, suggesting that the macrohabitat filter had a greater influence on macroinvertebrate assemblages than did local site characteristics. Few taxa were found exclusively in Pc, and this macrohabitat shared numerous taxa with R and Pd, indicating that Pc may act as a bridge between R and Pd during drought. Drought is regarded as a ramp disturbance, but our results suggest that the response of macroinvertebrate assemblages to the loss of hydrological connectivity among macrohabitats is gradual, at least in Mediterranean-climate streams where drying is gradual. However, the changes may be more dramatic in arid and semiarid streams or in Mediterranean-climate streams if drying is rapid.

Effects of isoflavones on beany flavor and astringency of soymilk and cooked whole soybean grains

Flavor is the main limiting factor affecting soybean acceptability in the Occidental countries. The purpose of this study was to determine the effetcs of isoflavones on soybean flavor. Differences in beany flavor and astringency of soymilk and cooked whole soybean grains, prepared with cultivars IAS 5 and BR-36 (136 and 54 mg of total isoflavones /100 g of sample, respectively) with pre-soaking and pre-heating of grains, were sensorially analised, by an unstructured category scale of ascending intensity. Differences in isoflavone contents for both soybean cultivars were maintained in the two products, despite the pre-treatments in the processing. Pre-soaking of grains intensified beany flavor in the soymilk, reducing the perception of astringency, which is caused by the aglucones that were developed in reduced amounts.The whole soybeans grains cooked under pressure (1.5 kgf/cm² at 127°C) presented reduced levels of isoflavones malonyl-glucosides. Due to thermal instability, these compounds were converted to conjugated glucosides, genistin and daidzin. In the cooked whole soybean grains, no aglucones were formed and consequently it was not possible to detect differences in astringency. Results suggest that pre-heating of grains promote better flavor in soybean products.

Bridge Deck Expansion Assembly on I-380 in Waterloo, HR-505B, 1990

The objective of this research was to evaluate two experimental Acme MSB neoprene expansion assemblies to identify possible construction problems and to determine the long term performance. These joints were installed in Black Hawk County on the curved bridge of ramp H from US 218 to I-380 in Waterloo, Iowa. Visual inspections were made yearly. There is slow leakage at one joint and indication that there is some slow leakage of both joints. The joint assemblies have performed well.

Modification of Ca-Montmorillonite by Low-Temperature Heat Treatment, HR-106, 1964

Objectives of this investigation were to measure the effects of moderate heat treatments (below the dehydroxylation temperature) on physical and chemical properties of a calcium-montmorillonite clay. Previous workers have noted the reduction in cation exchange capacity and swelling property after heating in the range 200 to 400°C, and have suggested several possible explanations, such as hysteresis effect, increased inter-layer attractions due to removal of inter-layer water, or changes in the disposition of inter-layer or layer surface ions. The liquid limits of Ca-montmorillonite were steadily decreased with increased temperature of treatment, levelling at about 450°C. The plastic limit decreased slightly up to 350°C, above which samples could no longer be rolled into threads. The gradual change is in contrast with sudden major changes noted for weight loss (maximum rates of change at l00°C and 500°C), glycol retention surface area (520°C), and d001 diffraction peak intensity (17.7 A spacing) and breadth after glycolation (530°C). Other properties showing more gradual reductions with heat treatment were amount of exchangeable calcium (without water soaking), cation exchange capacity by NH4AC method, and d001 intensity (21 A spacing) after storing at 100% r.h. one month and re-wetting with water. Previous water soaking allowed much greater release of fixed Ca++ up to 450°C. Similar results were obtained with cation exchange capacities when samples were treated with N CaCl2 solution. The 21.0 A peak intensity curve showed close similarity to the liquid limit and plastic index curves in the low temperature range, and an explanation is suggested.