Measurement of differential J/psi production cross sections and forward-backward ratios in p plus Pb collisions with the ATLAS detector

Measurements of differential cross sections for J/ψ production in p+Pb collisions at sNN−−−−√=5.02 TeV at the CERN Large Hadron Collider with the ATLAS detector are presented. The data set used corresponds to an integrated luminosity of 28.1 nb−1. The J/ψ mesons are reconstructed in the dimuon decay channel over the transverse momentum range 8

Measurement of transverse energy-energy correlations in multi-jet events in pp collisions at s√=7 TeV using the ATLAS detector and determination of the strong coupling constant αs(mZ)

High transverse momentum jets produced in pp collisions at a centre of mass energy of 7 TeV are used to measure the transverse energy--energy correlation function and its associated azimuthal asymmetry. The data were recorded with the ATLAS detector at the LHC in the year 2011 and correspond to an integrated luminosity of 158 pb−1. The selection criteria demand the average transverse momentum of the two leading jets in an event to be larger than 250 GeV. The data at detector level are well described by Monte Carlo event generators. They are unfolded to the particle level and compared with theoretical calculations at next-to-leading-order accuracy. The agreement between data and theory is good and provides a precision test of perturbative Quantum Chromodynamics at large momentum transfers. From this comparison, the strong coupling constant given at the Z boson mass is determined to be αs(mZ)=0.1173±0.0010 (exp.) +0.0065−0.0026 (theo.).

Measurement of the branching ratio Γ(Λ0b→ψ(2S)Λ0)/Γ(Λ0b→J/ψΛ0) with the ATLAS detector

An observation of the Λ0b→ψ(2S)Λ0 decay and a comparison of its branching fraction with that of the Λ0b→J/ψΛ0 decay has been made with the ATLAS detector in proton--proton collisions at s√=8TeV at the LHC using an integrated luminosity of 20.6fb−1. The J/ψ and ψ(2S) mesons are reconstructed in their decays to a muon pair, while the Λ0→pπ− decay is exploited for the Λ0 baryon reconstruction. The Λ0b baryons are reconstructed with transverse momentum pT>10GeV and pseudorapidity |η|<2.1. The measured branching ratio of the Λ0b→ψ(2S)Λ0 and Λ0b→J/ψΛ0 decays is Γ(Λ0b→ψ(2S)Λ0)/Γ(Λ0b→J/ψΛ0)=0.501±0.033(stat)±0.019(syst), lower than the expectation from the covariant quark model.

Measurement of colour flow with the jet pull angle in t(t)over-bar events using the ATLAS detector at root s=8 TeV

The distribution and orientation of energy inside jets is predicted to be an experimental handle on colour connections between the hard--scatter quarks and gluons initiating the jets. This Letter presents a measurement of the distribution of one such variable, the jet pull angle. The pull angle is measured for jets produced in tt¯ events with one W boson decaying leptonically and the other decaying to jets using 20.3 fb−1 of data recorded with the ATLAS detector at a centre--of--mass energy of s√=8 TeV at the LHC. The jet pull angle distribution is corrected for detector resolution and acceptance effects and is compared to various models.

Measurement of the correlation between flow harmonics of different order in lead-lead collisions at root S-NN=2.76 TeV with the ATLAS detector

Correlations between the elliptic or triangular flow coefficients vm (m=2 or 3) and other flow harmonics vn (n=2 to 5) are measured using sNN−−−−√=2.76 TeV Pb+Pb collision data collected in 2010 by the ATLAS experiment at the LHC, corresponding to an integrated lumonisity of 7 μb−1. The vm-vn correlations are measured in midrapidity as a function of centrality, and, for events within the same centrality interval, as a function of event ellipticity or triangularity defined in a forward rapidity region. For events within the same centrality interval, v3 is found to be anticorrelated with v2 and this anticorrelation is consistent with similar anticorrelations between the corresponding eccentricities ϵ2 and ϵ3. On the other hand, it is observed that v4 increases strongly with v2, and v5 increases strongly with both v2 and v3. The trend and strength of the vm-vn correlations for n=4 and 5 are found to disagree with ϵm-ϵn correlations predicted by initial-geometry models. Instead, these correlations are found to be consistent with the combined effects of a linear contribution to vn and a nonlinear term that is a function of v22 or of v2v3, as predicted by hydrodynamic models. A simple two-component fit is used to separate these two contributions. The extracted linear and nonlinear contributions to v4 and v5 are found to be consistent with previously measured event-plane correlations.

Quantifying, generating and mitigating radio interference in Low-Power Wireless Networks

Doctoral Programme in Telecommunication - MAP-tele

Listening to the public: enacting power : citizen access, Standing and influence in public participation discourses

Public participation in environmental governance is typically associated with citizen access to power despite many closures and limitations having been identified in participatory processes. This article proposes an analytical framework to analyse discursive practices involved in public consultation processes. Critical Discourse Analysis is used to examine and appraise citizens’ access, standing and influence. We apply that framework to a ‘notice and comment’ process on a hydroelectric power plan in Portugal and show that it was discursively managed to justify the decision of constructing 10 large dams and to reject critical or alternative views. Citizens’ access, standing and influence were constrained through diverse discursive practices which (re)produced very unequal power relationsbetween policy proponents and participating individuals. More generally, the article illustrates the potential of Critical Discourse Analysis to assess voice(s) in policy processes. Focusing on argumentative, interactional and rhetorical levels, and how they are interwoven in public consultation discourses, the proposed framework is conceivably applicable in other studies.

Validation study of an automated wrist monitor, omron model HEM-608, compared with the standard methods for blood pressure measurement

OBJECTIVE - The aim of our study was to assess the profile of a wrist monitor, the Omron Model HEM-608, compared with the indirect method for blood pressure measurement. METHODS - Our study population consisted of 100 subjects, 29 being normotensive and 71 being hypertensive. Participants had their blood pressure checked 8 times with alternate techniques, 4 by the indirect method and 4 with the Omron wrist monitor. The validation criteria used to test this device were based on the internationally recognized protocols. RESULTS - Our data showed that the Omron HEM-608 reached a classification B for systolic and A for diastolic blood pressure, according to the one protocol. The mean differences between blood pressure values obtained with each of the methods were -2.3 +7.9mmHg for systolic and 0.97+5.5mmHg for diastolic blood pressure. Therefore, we considered this type of device approved according to the criteria selected. CONCLUSION - Our study leads us to conclude that this wrist monitor is not only easy to use, but also produces results very similar to those obtained by the standard indirect method.

Devices and Techniques for Blood Pressure Measurement and Criteria for Hypertension Adopted by Brazilian Physicians: Exploratory Study

OBJECTIVE: To determine technical procedures and criteria used by Brazilian physicians for measuring blood pressure and diagnosing hypertension. METHODS: A questionnaire with 5 questions about practices and behaviors regarding blood pressure measurement and the diagnosis of hypertension was sent to 25,606 physicians in all Brazilian regions through a mailing list. The responses were compared with the recommendations of a specific consensus and descriptive analysis. RESULTS: Of the 3,621 (14.1%) responses obtained, 57% were from the southeastern region of Brazil. The following items were reported: use of an aneroid device by 67.8%; use of a mercury column device by 14.6%; 11.9% of the participants never calibrated the devices; 35.7% calibrated the devices at intervals < 1 year; 85.8% measured blood pressure in 100% of the medical visits; 86.9% measured blood pressure more than once and on more than one occasion. For hypertension diagnosis, 55.7% considered the patient's age, and only 1/3 relied on consensus statements. CONCLUSION: Despite the adequate frequency of both practices, it was far from that expected, and some contradictions between the diagnostic criterion for hypertension and the number of blood pressure measurements were found. The results suggest that, to include the great majority of the medical professionals, disclosure of consensus statements and techniques for blood pressure measurement should go beyond the boundaries of medical events and specialized journals.

Assessment of the DIXTAL DX-2710 Automated Oscillometric Device for Blood Pressure Measurement with the Validation Protocols of the British Hypertension Society (BHS) and the Association for the Advancement of Medical Instrumentation (AAMI)

OBJECTIVE: To assess the Dixtal DX2710 automated oscillometric device used for blood pressure measurement according to the protocols of the BHS and the AAMI. METHODS: Three blood pressure measurements were taken in 94 patients (53 females 15 to 80 years). The measurements were taken randomly by 2 observers trained to measure blood pressure with a mercury column device connected with an automated device. The device was classified according to the protocols of the BHS and AAMI. RESULT: The mean of blood pressure levels obtained by the observers was 148±38/93±25 mmHg and that obtained with the device was 148±37/89±26 mmHg. Considering the differences between the measurements obtained by the observer and those obtained with the automated device according to the criteria of the BHS, the following classification was adopted: "A" for systolic pressure (69% of the differences < 5; 90% < 10; and 97% < 15 mmHg); and "B" for diastolic pressure (63% of the differences < 5; 83% < 10; and 93% < 15 mmHg). The mean and standard deviation of the differences were 0±6.27 mmHg for systolic pressure and 3.82±6.21 mmHg for diastolic pressure. CONCLUSION: The Dixtal DX2710 device was approved according to the international recommendations.

Assessment of the techniques of blood pressure measurement by health professionals

OBJECTIVE: To assess blood pressure measurement by health professionals of a public hospital in São Paulo State. METHODS: Semi-structured interviews and direct observation were performed with a verification list according to the criteria reported by Perloff et al. One hundred and five health professionals took part in the study. After measuring blood pressure, the level of concordance between the way the procedure was performed and the recommended one was assessed. RESULTS: Nurses and nurse's aides abided by 40% of the recommended procedures for adequate blood pressure measurement. The other categories of health professionals (nursing and medicine teachers, physicians, residents, and nursing students) abided by approximately 70%. CONCLUSION: Permanent educational activities aiming at standardizing blood pressure measurement should be implemented among the different categories of health professionals.

El impacto de las normas y de la ideología sobre el procesamiento emocional, motivacional y cognitivo del comportamiento político de las elites de poder y la ciudadanía de Córdoba. Norms and ideologies impact on the emotional, motivational and cognitive processesing of power elite and citizen political behavior in Cordoba.

El presente estudio pretende arribar a la construcción de un modelo explicativo del comportamiento político a partir de la contribución que los marcos sociales (norma sociales, normas de ciudadanía, ideología, confianza política) y sociocognitivos (inteligencia afectiva, interés político, eficacia política, conocimiento político, sentimiento de comunidad) mostraron, en términos de relaciones entre las variables, sobre el mismo. Nuestra atención se centra no sólo al comportamiento político de la ciudadanía -que es donde se desarrollaron la mayor parte de los estudios-, sino a las elites de poder constitutivas del sistema político (jueces, legisladores provinciales y representantes de instituciones del gobierno y de organismos no gubernamentales). Asimismo, pretende establecer las diferencias que puedan evidenciarse en torno a la relación de estas variables con el comportamiento político entre los distintos colectivos estudiados en el ámbito de la ciudad de Córdoba. Para ello se realizara una primera etapa de estudio instrumental, con el objeto de analizar las propiedades psicométricas de los instrumentos a utilizar en la operacionalización de las variables. Para ello se tomara una muestra accidental de 250 personas entre 18 y 65 años de edad. Posteriormente, se realizarán dos etapas de estudio ex post facto, con la finalidad de construir los modelos planteados. En la primera de ellas, se trabajará con una muestra accidental de 100 representantes de los grupos de poder estudiados y en la segunda con una muestra probabilística de 500 ciudadanos cordobeses entre 18 y 65 años de edad.

Analisis De Mercados De Energía Eléctrica Competitivos Con Participación De Energía Eólica. Competitive Electricity Markets Analisis with Wind Power Generation.

La utilización de energía eólica es un hecho cada vez más común en nuestro mundo como respuesta a mitigar el creciente aumento de demanda de energía, los aumentos constantes de precio, la escasez de combustibles fósiles y los impactos del cambio climático, los que son cada día más evidentes.Consecuentemente, el interés por la participación de esta nueva forma de generación de energía en sistema eléctrico de potencia ha aumentado considerablemente en los últimos años. La incorporación de generación de origen eólico en el sistema eléctrico de potencia requiere de un análisis detallado del sistema eléctrico en su conjunto, considerando la interacción entre parques y unidades de generación eólica, plantas de generación convencional y el sistema eléctrico de potencia. La integración de generación de origen renovable en el sistema eléctrico de potencia convencional presenta nuevos desafíos los que pueden ser atribuidos a características propias de este tipo de generación, por ejemplo la fluctuación de energía debido a la naturaleza variable del viento, la naturaleza distribuida de la generación eólica y las características constructivas y método de conexión de los distintos modelos de turbinas eólicas al sistema.La finalidad de este proyecto de investigación consiste en investigar el impacto sobre un mercado de sistema eléctrico competitivo causado por el agregado de generación de origen eolico. Como punto de partida se pretende realizar modelos de plantas de generacion eolica para luego incorporarlos a los modelos de sistemas eléctricos y realizar estudios de de despacho económico, flujo de cargas, análisis transitorio y estudios dinámicos del sistema.

Coordinación socio-política. Redes de influencia y estructuras de poder en CórdobaSocio-political coordination. Influence Networks and power structures in Córdoba.

Los mecanismos de producción y reproducción de la influencia política es una importante área de estudio de la ciencia política en las últimas décadas. En la misma se han disputado diferentes teorías, desde las que plantean la influencia predominante de grupos de poder y sectores corporativos tanto en las decisiones del estado como en las no decisiones, hasta los que plantean que existe la puja de diferentes intereses dentro del Estado pero que no existe ningún grupo predominante. El análisis de redes (network analysis) permite estudiar este objeto mediante la observación de la estructura de relaciones de los actores influyentes dentro de la política provincial. En esta area de estudio, este proyecto propone estudiar de qué manera se produce y reproduce la influencia política en la Provincia de Córdoba.Las hipótesis que plantea el proyecto son las siguientes: H1- La estructura del poder socio-político provincial adquiere una configuración reticular en la que existe un núcleo de actores que representan intereses tradicionales organizados y permite un escaso acceso de nuevas organizaciones que defienden intereses sociales difusos. H2- En el proceso de influencia sociopolítica provincial operan mecanismos de influencia interpersonales directos e indirectos (Brokerage) que permiten a los actores acceder e influir en los decisores públicos. H3- En el proceso de influencia socio-política interviene una diversidad de recursos de poder que los actores utilizan para influir las políticas públicas. Para esto se propone como objetivos del proyecto los siguientes: 1- Identificar y analizar la estructura de poder e influencia que subyace a la política provincial. 2- Analizar los intereses, actores y sectores incluidos y excluidos de la estructura de influencia política. 3- Analizar los mecanismos y recursos de producción y reproducción del poder y la influencia. 4- Analizar las áreas de política del estado provincial que resultan lugar de influencia de los actores y sectores que configuran la estructura de poder socio-política. 5- Analizar el sistema de decisión colectiva (policy domain) en dos áreas de política provincial. 6- Analizar los recursos que posibilitan a los actores ejercer poder e influencia en las áreas de políticas estudiadas. Para la verificación empírica de las hipótesis se realiza un diseño de investigación que incluye el mapeo y análisis de dos tipos de redes políticas diferentes, la "red de influencia en la política provincial" y la red de influencia en un "área de políticas públicas". La reconstrucción de las redes políticas se realizará mediante entrevistas semi-estructuradas a actores sociales y políticos en un muestreo no probabilístico de tipo "bola de nieve". La investigación pretende realizar un aporte a la comprensión de la coordinación política y, en tal sentido, espera alcanzar una adecuada descripción y comprensión de los procesos de influencia y de estructuración del poder en la Provincia de Córdoba.

Impact of wind power generation on the electricity supply industry

The objective of this dissertation is to investigate the effect wind energy has on the Electricity Supply Industry in Ireland. Wind power generation is a source of renewable energy that is in abundant supply in Ireland and is fast becoming a resource that Ireland is depending on as a diverse and secure of supply of energy. However, wind is an intermittent resource and coupled with a variable demand, there are integration issues with balancing demand and supply effectively. To maintain a secure supply of electricity to customers, it is necessary that wind power has an operational reserve to ensure appropriate backup for situations where there is low wind but high demand. This dissertation examines the affect of this integration by comparing wind generation to that of conventional generation in the national grid. This is done to ascertain the cost benefits of wind power generation against a scenario with no wind generation. Then, the analysis examines to see if wind power can meet the pillars of sustainability. This entails looking at wind in a practical scenario to observe how it meets these pillars under the criteria of environmental responsibility, displacement of conventional fuel, cost competitiveness and security of supply.