Definition, realization and evaluation of a software reference architecture for use in space applications

A recent initiative of the European Space Agency (ESA) aims at the definition and adoption of a software reference architecture for use in on-board software of future space missions. Our PhD project placed in the context of that effort. At the outset of our work we gathered all the industrial needs relevant to ESA and all the main European space stakeholders and we were able to consolidate a set of technical high-level requirements for the fulfillment of them. The conclusion we reached from that phase confirmed that the adoption of a software reference architecture was indeed the best solution for the fulfillment of the high-level requirements. The software reference architecture we set on building rests on four constituents: (i) a component model, to design the software as a composition of individually verifiable and reusable software units; (ii) a computational model, to ensure that the architectural description of the software is statically analyzable; (iii) a programming model, to ensure that the implementation of the design entities conforms with the semantics, the assumptions and the constraints of the computational model; (iv) a conforming execution platform, to actively preserve at run time the properties asserted by static analysis. The nature, feasibility and fitness of constituents (ii), (iii) and (iv), were already proved by the author in an international project that preceded the commencement of the PhD work. The core of the PhD project was therefore centered on the design and prototype implementation of constituent (i), a component model. Our proposed component model is centered on: (i) rigorous separation of concerns, achieved with the support for design views and by careful allocation of concerns to the dedicated software entities; (ii) the support for specification and model-based analysis of extra-functional properties; (iii) the inclusion space-specific concerns.

Numerical simulation of interdigitated back contact hetero-junction solar cells

The goal of this thesis is the application of an opto-electronic numerical simulation to heterojunction silicon solar cells featuring an all back contact architecture (Interdigitated Back Contact Hetero-Junction IBC-HJ). The studied structure exhibits both metal contacts, emitter and base, at the back surface of the cell with the objective to reduce the optical losses due to the shadowing by front contact of conventional photovoltaic devices. Overall, IBC-HJ are promising low-cost alternatives to monocrystalline wafer-based solar cells featuring front and back contact schemes, in fact, for IBC-HJ the high concentration doping diffusions are replaced by low-temperature deposition processes of thin amorphous silicon layers. Furthermore, another advantage of IBC solar cells with reference to conventional architectures is the possibility to enable a low-cost assembling of photovoltaic modules, being all contacts on the same side. A preliminary extensive literature survey has been helpful to highlight the specific critical aspects of IBC-HJ solar cells as well as the state-of-the-art of their modeling, processing and performance of practical devices. In order to perform the analysis of IBC-HJ devices, a two-dimensional (2-D) numerical simulation flow has been set up. A commercial device simulator based on finite-difference method to solve numerically the whole set of equations governing the electrical transport in semiconductor materials (Sentuarus Device by Synopsys) has been adopted. The first activity carried out during this work has been the definition of a 2-D geometry corresponding to the simulation domain and the specification of the electrical and optical properties of materials. In order to calculate the main figures of merit of the investigated solar cells, the spatially resolved photon absorption rate map has been calculated by means of an optical simulator. Optical simulations have been performed by using two different methods depending upon the geometrical features of the front interface of the solar cell: the transfer matrix method (TMM) and the raytracing (RT). The first method allows to model light prop-agation by plane waves within one-dimensional spatial domains under the assumption of devices exhibiting stacks of parallel layers with planar interfaces. In addition, TMM is suitable for the simulation of thin multi-layer anti reflection coating layers for the reduction of the amount of reflected light at the front interface. Raytracing is required for three-dimensional optical simulations of upright pyramidal textured surfaces which are widely adopted to significantly reduce the reflection at the front surface. The optical generation profiles are interpolated onto the electrical grid adopted by the device simulator which solves the carriers transport equations coupled with Poisson and continuity equations in a self-consistent way. The main figures of merit are calculated by means of a postprocessing of the output data from device simulation. After the validation of the simulation methodology by means of comparison of the simulation result with literature data, the ultimate efficiency of the IBC-HJ architecture has been calculated. By accounting for all optical losses, IBC-HJ solar cells result in a theoretical maximum efficiency above 23.5% (without texturing at front interface) higher than that of both standard homojunction crystalline silicon (Homogeneous Emitter HE) and front contact heterojuction (Heterojunction with Intrinsic Thin layer HIT) solar cells. However it is clear that the criticalities of this structure are mainly due to the defects density and to the poor carriers transport mobility in the amorphous silicon layers. Lastly, the influence of the most critical geometrical and physical parameters on the main figures of merit have been investigated by applying the numerical simulation tool set-up during the first part of the present thesis. Simulations have highlighted that carrier mobility and defects level in amorphous silicon may lead to a potentially significant reduction of the conversion efficiency.

Innovative architecture of on-board and on-ground radio systems for space communication

The radio communication system is one of the most critical system of the overall satellite platform: it often represents the only way of communication, between a spacecraft and the Ground Segment or among a constellation of satellites. This thesis focuses on specific innovative architectures for on-board and on-ground radio systems. In particular, this work is an integral part of a space program started in 2004 at the University of Bologna, Forlì campus, which led to the completion of the microsatellite ALMASat-1, successfully launched on-board the VEGA maiden flight. The success of this program led to the development of a second microsatellite, named ALMASat-EO, a three-axis stabilized microsatellite able to capture images of the Earth surface. Therefore, the first objective of this study was focused on the investigation of an innovative, efficient and low cost architecture for on-board radio communication systems. The TT&C system and the high data rate transmitter for images downlink design and realization are thoroughly described in this work, together with the development of the embedded hardware and the adopted antenna systems. Moreover, considering the increasing interest in the development of constellations of microsatellite, in particular those flying in close formations, a careful analysis has been carried out for the development of innovative communication protocols for inter-satellite links. Furthermore, in order to investigate the system aspects of space communications, a study has been carried out at ESOC having as objective the design, implementation and test of two experimental devices for the enhancement of the ESA GS. Thus, a significant portion of this thesis is dedicated to the description of the results of a method for improving the phase stability of GS radio frequency equipments by means of real-time phase compensation and a new way to perform two antennas arraying tracking using already existing ESA tracking stations facilities.

Architettura e verità. Emil Steffann architetto di chiese

La ricerca pone al suo centro lo studio dell'opera architettonica di Emil Steffann (1899-1968) la cui produzione realizzata consta, nel breve arco temporale che va dal 1950 al 1968, del ragguardevole numero di trentanove chiese, rappresentando un caso emblematico di progettazione e costruzione di edifici per il culto cristiano in grado di raffigurarne concretamente i principi fondativi liturgici, estetici e morfologici. L'architettura di Steffann, profondamente ispirata dallo spirito religioso, legata a figure primigenie che plasmano lo stare-insieme della comunità nella qualità corporea della materia, dove la presenza liturgica e monumentale si esprime nel silenzio e nella disponibilità di uno spazio circoscritto dai muri e direzionato dalla luce, concorre a definire nell'oggettivo amore per il vero la percezione estetico-teologica e la poetica formativa che connaturano, a nostro parere, progetto e segno della chiesa. Il testo concretizza il primo studio monografico completo di questo corpus architettonico e si basa sulla ricognizione diretta delle opere di Steffann; ne è derivata una narrazione non conseguente a un ordine cronologico o di presupposta importanza degli edifici, bensì che ricerca ed evidenzia corrispondenze tra nodi di una rete ideativa la quale, con diversi gradi di finitezza, in punti non sempre omogenei del tempo e dello spazio, denota un'esperienza autentica del comporre e del costruire. Il racconto individua gli oggetti architettonici, ne discute la consistenza aprendosi a riferimenti altri (in particolare il pensiero ecclesiologico-liturgico di Romano Guardini e quello estetico-teologico di Hans Urs von Balthasar) in grado di illuminarne la genesi e la manifestazione, li lega infine in sequenze analogiche. Una serie di tavole fotografiche originali, parte ineludibile e integrante della ricerca, testimonia dello stato attuale dei luoghi, connotando ulteriormente l'aspetto info-rappresentativo della loro composizione architettonica. In chiusura, la sintesi architetturale vuole essere uno strumento di verifica e progetto, quindi di trasposizione futura, correlato all'elaborazione documentaria.

A parallel community detection algorithm

Complex networks analysis is a very popular topic in computer science. Unfortunately this networks, extracted from different contexts, are usually very large and the analysis may be very complicated: computation of metrics on these structures could be very complex. Among all metrics we analyse the extraction of subnetworks called communities: they are groups of nodes that probably play the same role within the whole structure. Communities extraction is an interesting operation in many different fields (biology, economics,...). In this work we present a parallel community detection algorithm that can operate on networks with huge number of nodes and edges. After an introduction to graph theory and high performance computing, we will explain our design strategies and our implementation. Then, we will show some performance evaluation made on a distributed memory architectures i.e. the supercomputer IBM-BlueGene/Q "Fermi" at the CINECA supercomputing center, Italy, and we will comment our results.

Constraint based methods for allocation and scheduling of periodic applications

This work presents exact algorithms for the Resource Allocation and Cyclic Scheduling Problems (RA&CSPs). Cyclic Scheduling Problems arise in a number of application areas, such as in hoist scheduling, mass production, compiler design (implementing scheduling loops on parallel architectures), software pipelining, and in embedded system design. The RA&CS problem concerns time and resource assignment to a set of activities, to be indefinitely repeated, subject to precedence and resource capacity constraints. In this work we present two constraint programming frameworks facing two different types of cyclic problems. In first instance, we consider the disjunctive RA&CSP, where the allocation problem considers unary resources. Instances are described through the Synchronous Data-flow (SDF) Model of Computation. The key problem of finding a maximum-throughput allocation and scheduling of Synchronous Data-Flow graphs onto a multi-core architecture is NP-hard and has been traditionally solved by means of heuristic (incomplete) algorithms. We propose an exact (complete) algorithm for the computation of a maximum-throughput mapping of applications specified as SDFG onto multi-core architectures. Results show that the approach can handle realistic instances in terms of size and complexity. Next, we tackle the Cyclic Resource-Constrained Scheduling Problem (i.e. CRCSP). We propose a Constraint Programming approach based on modular arithmetic: in particular, we introduce a modular precedence constraint and a global cumulative constraint along with their filtering algorithms. Many traditional approaches to cyclic scheduling operate by fixing the period value and then solving a linear problem in a generate-and-test fashion. Conversely, our technique is based on a non-linear model and tackles the problem as a whole: the period value is inferred from the scheduling decisions. The proposed approaches have been tested on a number of non-trivial synthetic instances and on a set of realistic industrial instances achieving good results on practical size problem.

An architecture for scaling ontology networks

Constructing ontology networks typically occurs at design time at the hands of knowledge engineers who assemble their components statically. There are, however, use cases where ontology networks need to be assembled upon request and processed at runtime, without altering the stored ontologies and without tampering with one another. These are what we call "virtual [ontology] networks", and keeping track of how an ontology changes in each virtual network is called "multiplexing". Issues may arise from the connectivity of ontology networks. In many cases, simple flat import schemes will not work, because many ontology managers can cause property assertions to be erroneously interpreted as annotations and ignored by reasoners. Also, multiple virtual networks should optimize their cumulative memory footprint, and where they cannot, this should occur for very limited periods of time. We claim that these problems should be handled by the software that serves these ontology networks, rather than by ontology engineering methodologies. We propose a method that spreads multiple virtual networks across a 3-tier structure, and can reduce the amount of erroneously interpreted axioms, under certain raw statement distributions across the ontologies. We assumed OWL as the core language handled by semantic applications in the framework at hand, due to the greater availability of reasoners and rule engines. We also verified that, in common OWL ontology management software, OWL axiom interpretation occurs in the worst case scenario of pre-order visit. To measure the effectiveness and space-efficiency of our solution, a Java and RESTful implementation was produced within an Apache project. We verified that a 3-tier structure can accommodate reasonably complex ontology networks better, in terms of the expressivity OWL axiom interpretation, than flat-tree import schemes can. We measured both the memory overhead of the additional components we put on top of traditional ontology networks, and the framework's caching capabilities.

Fluorescence close to dielectric interfaces

The aim of the work was to study the correlation between the orientation and excited-state lifetimes of organic dyes close to dielectric interfaces. For this purpose, an experimental setup was designed and built, guiding the light through a prism in total internal reflection geometry. Fluorescence intensities and lifetimes for an ensemble of dye molecules were analyzed as a function of the excitation and detection polarizations. Working close to the total internal reflection angle, the differences between polarization combinations were enhanced. A classical electromagnetic model that assumes a chromophore as a couple of point-like electrical dipoles was developed. A numerical method to calculate the excitation and emission of dye molecules embedded in a multilayer system was implemented, by which full simulation of the time resolved fluorescence experiments was achieved. Free organic dyes and organic dyes covalently bound to polyelectrolyte chains were used. The polymer functionalization process avoided aggregation and provided control over the dyes position, within a few nanometers to the interface. Moreover, by varying the pH, the polymer chains could be deposited on different substrates with different conformations and the resulting fluorescence characteristics analyzed. Initially the fluorescence of organic dyes embedded in a polymer matrix was studied as a function of the distance between the fluorophores and the polymer-air interface. The non-radiative decay rate, vacuum decay rate and the relative angle between the excitation and emission dipoles of the chromophores could be determined. Different free organic dyes were deposited onto different dielectric spacers, as close as possible to the air-dielectric interface. Surprisingly, the fluorescence characteristics of dyes deposited onto polyelectrolyte layer were in good agreement with theoretical predictions of dyes in a polymer matrix, even when the layer was only 2 nm thick. When functionalized chains were deposited at low pH, on top of a polyelectrolyte spacer, the fluorescence had the characteristics of emitters embedded in a polymer matrix as well. Surface deposition at high pH showed an intermediate behaviour between emitters embedded in polymer and on top of the surface, in air. In general, for low pH values, the chains are deposited on a substrate in a train-like conformation. For high pH values, the chains are deposited in a loop-like conformation. As a consequence at low pH the functionalized polymer strongly interdigitates with the polyelectrolyte chains of the spacer, bringing most of the dyes inside the polymer. Thus, the fluorophores may experience the polymer as surrounding environment. On the other hand, for high pH values the dye-loaded chains adsorbed have a conformational arrangement of dense loops that extend away from the surface. Therefore many fluorophores experience the air as surrounding environment. Changing the spacer from polyelectrolyte to negatively charged silane produced contradictory results for lifetimes and intensities. The fluorescence intensities indicated the behaviour of emitters embedded in a polymer matrix, regardless of the pH value. On the other hand, for low pH values, the excited-state lifetimes showed that the emitters behaved as in air. For higher pH values, an intermediate behaviour between fluorophores located within and above of a dielectric film was observed. The poor agreement between theoretical and experimental data may be due to the simplified model utilized, by which the dipoles are assumed either in one side or in the other with respect to a geometrical air-dielectric interface. In the case when the dielectric film is constituted by the functionalized polymer chains themselves, reality is more complex and a different model may apply. Nevertheless, possible applications of the technique arise from a qualitative analysis.

Use of shared memory in the context of embedded multi-core processors: exploration of the technology and its limits

Modern embedded systems embrace many-core shared-memory designs. Due to constrained power and area budgets, most of them feature software-managed scratchpad memories instead of data caches to increase the data locality. It is therefore programmers’ responsibility to explicitly manage the memory transfers, and this make programming these platform cumbersome. Moreover, complex modern applications must be adequately parallelized before they can the parallel potential of the platform into actual performance. To support this, programming languages were proposed, which work at a high level of abstraction, and rely on a runtime whose cost hinders performance, especially in embedded systems, where resources and power budget are constrained. This dissertation explores the applicability of the shared-memory paradigm on modern many-core systems, focusing on the ease-of-programming. It focuses on OpenMP, the de-facto standard for shared memory programming. In a first part, the cost of algorithms for synchronization and data partitioning are analyzed, and they are adapted to modern embedded many-cores. Then, the original design of an OpenMP runtime library is presented, which supports complex forms of parallelism such as multi-level and irregular parallelism. In the second part of the thesis, the focus is on heterogeneous systems, where hardware accelerators are coupled to (many-)cores to implement key functional kernels with orders-of-magnitude of speedup and energy efficiency compared to the “pure software” version. However, three main issues rise, namely i) platform design complexity, ii) architectural scalability and iii) programmability. To tackle them, a template for a generic hardware processing unit (HWPU) is proposed, which share the memory banks with cores, and the template for a scalable architecture is shown, which integrates them through the shared-memory system. Then, a full software stack and toolchain are developed to support platform design and to let programmers exploiting the accelerators of the platform. The OpenMP frontend is extended to interact with it.

Stile. Teoria e prassi nell'opera di Viollet-le-Duc

Per Viollet-le-Duc lo “stile” «è la manifestazione di un ideale fondato su un principio» dove per principio si intende il principio d’ordine della struttura, quest’ultimo deve rispondere direttamente alla Legge dell’”unità” che deve essere sempre rispettata nell’ideazione dell’opera architettonica. A partire da questo nodo centrale del pensiero viollettiano, la presente ricerca si è posta come obiettivo quello dell’esplorazione dei legami fra teoria e prassi nell’opera di Viollet-le-Duc, nei quali lo “stile” ricorre come un "fil rouge" costante, presentandosi come una possibile inedita chiave di lettura di questa figura protagonista della storia del restauro e dell’architettura dell’Ottocento. Il lavoro di ricerca si é dunque concentrato su una nuova lettura dei documenti sia editi che inediti, oltre che su un’accurata ricognizione bibliografica e documentaria, e sullo studio diretto delle architetture. La ricerca archivistica si é dedicata in particolare sull’analisi sistematica dei disegni originali di progetto e delle relazioni tecniche delle opere di Viollet-le- Duc. A partire da questa prima ricognizione, sono stati selezionati due casi- studio ritenuti particolarmente significativi nell’ambito della tematica scelta: il progetto di restauro della chiesa della Madeleine a Vézelay (1840-1859) e il progetto della Maison Milon in rue Douai a Parigi (1857-1860). Attraverso il parallelo lavoro di analisi dei casi-studio e degli scritti di Viollet- le-Duc, si è cercato di verificare le possibili corrispondenze tra teoria e prassi operativa: confrontando i progetti sia con le opere teoriche, sia con la concreta testimonianza degli edifici realizzati.

Nano-fabrication of complex functional structures using non- conventional lithography

In Chapter 1 I will present a brief introduction on the state of art of nanotechnologies, nanofabrication techniques and unconventional lithography as a technique to fabricate the novel electronic device as resistive switch so-called memristor is shown. In Chapter 2 a detailed description of the main fabrication and characterization techniques employed in this work is reported. Chapter 3 parallel local oxidation lithography (pLOx) describes as a main technique to obtain accurate patterning process. All the effective parameters has been studied and the optimized condition observed to highly reproducible with excellent patterned nanostructures. The effect of negative bias, calls local reduction (LR) studied. Moreover, the use of AC bias shows faster patterning process respect to DC bias. In Chapter 4 (metal/ e-SiO2/ Si nanojunction) it is shown how the electrochemical oxide nanostructures by using pLOx can be used in the fabrication of novel devices call memristor. We demonstrate a new concept, based on conventional materials, where the lifetime problem is resolved by introducing a “regeneration” step, which restores the nano-memristor to its pristine condition by applying an appropriate voltage cycle. In Chapter 5 (Graphene/ e-SiO2/ Si), Graphene as a building block material is used as an electrode to selectively oxidize the silicon substrate by pLOx set up for the fabrication of novel resistive switch device. In Chapter 6 (surface architecture) I will show another application of pLOx in biotechnology is shown. So the surface functionalization combine with nano-patterning by pLOx used to design a new surface to accurately bind biomolecules with the possibility of studying those properties and more application in nano-bio device fabrication. So, in order to obtain biochips, electronic and optical/photonics devices Nano patterning of DNA used as scaffolds to fabricate small functional nano-components.

Luigi Nono: spazio e composizione

Architettura e musica. Spazio e tempo. Suono. Esperienza. Queste le parole chiave da cui ha preso avvio la mia ricerca. Tutto è iniziato dall’intuizione dell’esistenza di un legame tra due discipline cui ho dedicato molto tempo e studio, completando due percorsi accademici paralleli, la Facoltà di architettura e il Conservatorio. Dopo un lavoro d’individuazione e analisi degli infiniti spunti di riflessione che il tema offriva, ho focalizzato l’attenzione su uno degli esempi più emblematici di collaborazione tra un architetto e un musicista realizzatasi nel Novecento: Prometeo, tragedia dell’ascolto (1984), composta da Luigi Nono con la collaborazione di Massimo Cacciari e Renzo Piano. Attraverso lo studio di Prometeo ho potuto affrontare la trattazione di molte delle possibili declinazioni del rapporto interdisciplinare tra musica e architettura. La ricerca si è svolta principalmente sullo studio dei materiali conservati presso l’Archivio Luigi Nono e l’archivio della Fondazione Renzo Piano. La tesi è organizzata in tre parti: una prima parte in cui si affronta il tema del ruolo dello spazio nelle opere di Nono precedenti a Prometeo, facendo emergere l’importanza dell’ambiente culturale e sonoro veneziano; una seconda parte in cui si approfondisce il processo compositivo che ha portato alle rappresentazioni di Prometeo a Venezia, Milano e a Parigi; una terza parte in cui si prende in considerazione quanto avvenuto dopo Prometeo e si riflette sui contributi che questa esperienza può portare alla progettazione di spazi per la musica, analizzando diversi allestimenti dell’opera senza arca e prendendo in considerazione i progetti dell’auditorium dell’International Art Village di Akiyoshidai e della sala della nuova Philharmonie di Parigi. Lo studio dell’esperienza di Prometeo ha lo scopo di stimolare la curiosità verso la ricerca e la sperimentazione di quegli infiniti possibili della composizione architettonica e musicale di cui parla Nono.

Spatio-temporal models of the functional architecture of the visual cortex

In this work I tried to explore many aspects of cognitive visual science, each one based on different academic fields, proposing mathematical models capable to reproduce both neuro-physiological and phenomenological results that were described in the recent literature. The structure of my thesis is mainly composed of three chapters, corresponding to the three main areas of research on which I focused my work. The results of each work put the basis for the following, and their ensemble form an homogeneous and large-scale survey on the spatio-temporal properties of the architecture of the visual cortex of mammals.

The structuring body : a critical study in the description & explanation of perceptual experience

The aims of the dissertation are to find the right description of the structure of perceptual experience and to explore the ways in which the structure of the body might serve to explain it. In the first two parts, I articulate and defend the claim that perceptual experience seems direct and the claim that its objects seem real. I defend these claims as integral parts of a coherent metaphysically neutral conception of perceptual experience. Sense-datum theorists, certain influential perceptual psychologists, and early modern philosophers (most notably Berkeley) all disputed the claim that perceptual experience seems direct. In Part I, I argue that the grounds on which they did so were poor. The aim is then, in Part II, to give a proper appreciation of the distinctive intentionality of perceptual experience whilst remaining metaphysically neutral. I do so by drawing on the early work of Edmund Husserl, providing a characterisation of the perceptual experience of objects as real, qua mind-independent particulars. In Part III, I explore two possible explanations of the structure characterising the intentionality of perceptual experience, both of which accord a distinctive explanatory role to the body. On one account, perceptual experience is structured by an implicit pre-reflective consciousness of oneself as a body engaged in perceptual activity. An alternative account makes no appeal to the metaphysically laden concept of a bodily self. It seeks to explain the structure of perceptual experience by appeal to anticipation of the structural constraints of the body. I develop this alternative by highlighting the conceptual and empirical basis for the idea that a first-order structural affordance relation holds between a bodily agent and certain properties of its body. I then close with a discussion of the shared background assumptions that ought to inform disputes over whether the body itself (in addition to its representation) ought to serve as an explanans in such an account.

Inimmaginabile e progetto. Architettura e memoria nei luoghi della Deportazione

La memoria pubblica della Sho'ah è inscritta in una quantità proliferante di immagini e spazi memoriali. Ciò è riscontrabile in modo particolare nei principali "siti dello sterminio" assurti a simbolo nel corso degli anni, mentre molti altri "luoghi di memoria" della Deportazione soffrono di una condizione di intrinseca debolezza. Essa è riconducibile in primo luogo alla fragilità del dato materiale, i cui resti ormai privi di eloquenza risultano difficili da interpretare e conservare, in secondo luogo alla sovrapposizione di memorie concorrenti venutesi a determinare in conseguenza dei riusi successivi a cui queste strutture sono spesso andate soggette dopo la guerra, infine alla difficoltà di rendere espressione compiuta alla tragedia della Deportazione. Il caso del campo di Fossoli è paradigmatico: esso interroga la capacità del progetto di "dare forma" al palinsesto delle memorie, rendendo possibile il riconoscimento ed esplicitando una significazione delle tracce, senza aggiungere ulteriori interpretazioni. Lo spazio e il paesaggio, in quanto linguaggi indentitari, possono offrirsi come strumenti da questo punto di vista. Michel De Certeau vi fa riferimento quando afferma che lo spazio coincide con «l’effetto prodotto dalle operazioni che lo orientano, che lo circostanziano, o temporalizzano e lo fanno funzionare come unità polivalente di programmi conflittuali o di prossimità contrattuali». Lo spazio gioca un ruolo cruciale nel conformare l'esperienza del presente e allo stesso tempo nel rendere visibili le esperienze passate, compresse nella memoria collettiva. Lo scopo di questa ricerca è interrogare le potenzialità spaziali del luogo, considerate sotto il profilo culturale e semantico, come valida alternativa alla forma-monumento nella costruzione di una o più narrazioni pertinenti della memoria.