Transportadores sólidos de oxigênio à base de níquel e cobre suportados em aluminatos para combustão do metano pela tecnologia de recirculação química

In recent years, solid carriers suitable oxygen have been developed for use in different chemical processes recirculation. The success of this technology is directly related to the chemical reactivity and the oxygen storage capacity of the carrier. Thus, research into the development of new materials that can be applied to the process becomes extremely important. Possible candidates are the carriers based on nickel and copper for presenting favorable thermodynamic properties. In this work, aluminates type MAl2O4 (M = Mg and Ca) and M0,9B0,1Al2O4 (B = Ni and Cu) that are used as supports were synthesized by combustion reactions assisted by microwave and calcined at 900°C/2h. Then, the carriers were impregnated with 10% (m/m) of nickel or copper, and subsequently calcined at 600°C/2h to obtain the solid oxygen carriers, which were characterized by X-ray diffraction (XRD) Microscopy scanning electron microscopy (SEM) and temperature programmed reduction (TPR). Reactions simulating the combustion process by chemical recirculation were performed by cycles reduction/oxidation, in order to evaluate the reactivity of carriers. XRD analysis revealed diffraction peaks of the spinel type structures. In the doped substrates were verified the presence of secondary phases, suggesting that all the metal was incorporated into the spinel structure. In solid oxygen carriers, the NiO and CuO phases were observed after impregnation of active phases on different media. The results of evaluations of chemical cycles reduction/oxidation revealed that TSO's impregnated with nickel in various media were more active and are potential candidates for use in the chemical recirculation technology

Elaboração de pós de ferrita de cobalto, CoFe2O4, nanoestruturados e hierarquizados: influência da morfologia sobre a detecção e oxidação catalítica de gases poluentes

This thesis is part of research on new materials for catalysis and gas sensors more active, sensitive, selective. The aim of this thesis was to develop and characterize cobalt ferrite in different morphologies, in order to study their influence on the electrical response and the catalytic activity, and to hierarchize these grains for greater diffusivity of gas in the material. The powders were produced via hydrothermal and solvothermal, and were characterized by thermogravimetric analysis, X-ray diffraction, scanning electron microscopy, transmission electron microscopy (electron diffraction, highresolution simulations), and energy dispersive spectroscopy. The catalytic and electrical properties were tested in the presence of CO and NO2 gases, the latter in different concentrations (1-100 ppm) and at different temperatures (room temperature to 350 ° C). Nanooctahedra with an average size of 20 nm were obtained by hydrothermal route. It has been determined that the shape of the grains is mainly linked to the nature of the precipitating agent and the presence of OH ions in the reaction medium. By solvothermal method CoFe2O4 spherical powders were prepared with grain size of 8 and 20 nm. CoFe2O4 powders exhibit a strong response to small amounts of NO2 (10 ppm to 200 ° C). The nanooctahedra have greater sensitivity than the spherical grains of the same size, and have smaller response time and shorter recovery times. These results were confirmed by modeling the kinetics of response and recovery of the sensor. Initial tests of catalytic activity in the oxidation of CO between temperatures of 100 °C and 350 °C show that the size effect is predominant in relation the effect of the form with respect to the conversion of the reaction. The morphology of the grains influence the rate of reaction. A higher reaction rate is obtained in the presence of nanooctahedra. In order to improve the detection and catalytic properties of the material, we have developed a methodology for hierarchizing grains which involves the use of carbonbased templates.

Especificações e concepções de front-end UHF integrado e multipadrão em tecnologia CMOS 130nm

The Brazilian Environmental Data Collecting System (SBCDA) collects and broadcasts meteorological and environmental data, to be handled by dozens of institutions and organizations. The system space segment, composed by the data collecting satellites, plays an important role for the system operation. To ensure the continuity and quality of these services, efforts are being made to the development of new satellite architectures. Aiming a reduction of size and power consumption, the design of an integrated circuit containing a receiver front-end is proposed, to be embedded in the next SBCDA satellite generations. The circuit will also operate under the requirements of the international data collecting standard ARGOS. This work focuses on the design of an UHF low noise amplifier and mixers in a CMOS standard technology. The specifi- cations are firstly described and the circuit topologies presented. Then the circuit conception is discussed and the design variables derived. Finally, the layout is designed and the final results are commented. The chip will be fabricated in a 130 nm technology from ST Microelectronics.

Aplicação da tecnologia eletroquímica para a remoção e monitoramento de metais pesados em efluentes aquosos

Heavy metals are present in industrial waste. These metals can generate a large environmental impact contaminating water, soil and plants. The chemical action of heavy metals has attracted environmental interest. In this context, this study aimed to test t he performance of electrochemical technologies for removing and quantifying heavy metals. First ly , the electroanalytical technique of stripping voltammetry with glassy carbon electrode (GC) was standardized in order to use this method for the quantificatio n of metals during their removal by electrocoagulation process (EC). A nalytical curves were evaluated to obtain reliability of the determin ation and quantification of Cd 2+ and Pb 2+ separately or in a mixture. Meanwhile , EC process was developed using an el ectrochemical cell in a continuous flow (EFC) for removing Pb 2+ and Cd 2+ . The se experiments were performed using Al parallel plates with 10 cm of diameter (  63.5 cm 2 ) . The optimization of conditions for removing Pb 2+ and Cd 2+ , dissolved in 2 L of solution at 151 L h - 1 , were studied by applying different values of current for 30 min. Cd 2+ and Pb 2+ concentrations were monitored during electrolysis using stripping voltammetry. The results showed that the removal of Pb 2 + was effective when the EC pro cess is used, obtaining removals of 98% in 30 min. This behavior is dependent on the applied current, which implies an increase in power consumption. From the results also verified that the stripping voltammetry technique is quite reliable deter mining Pb 2+ concentration , when compared with the measurements obtained by atomic absorption method (AA). In view of this, t he second objective of this study was to evaluate the removal of Cd 2+ and Pb 2+ (mixture solution) by EC . Removal efficiency increasing current was confirmed when 93% and 100% of Cd 2+ and Pb 2+ was removed after 30 min . The increase in the current promotes the oxidation of sacrificial electrodes, and consequently increased amount of coagulant, which influences the removal of heavy metals in solution. Adsortive voltammetry is a fast, reliable, economical and simple way to determine Cd 2+ and Pb 2+ during their removal. I t is more economical than those normally used, which require the use of toxic and expensive reagents. Our results demonstrated the potential use of electroanalytical techniques to monitor the course of environmental interventions. Thus, the application of the two techniques associated can be a reliable way to monitor environmental impacts due to the pollution of aquatic ecosystems by heavy metals.

Interface para tecnologia assistiva baseada em eletrooculografia

We propose in this work, a new method of conceptual organization of areas involving assistive technology, categorizing them in a logical and simple manner; Furthermore, we also propose the implementation of an interface based on electroculography, able to generate high-level commands, to trigger robotic, computer and electromechanical devices. To validate the eye interface, was developed an electronic circuit associated with a computer program that captured the signals generated by eye movements of users, generating high-level commands, able to trigger an active bracing and many other electromechanical systems. The results showed that it was possible to control many electromechanical systems through only eye movements. The interface is presented as a viable way to perform the proposed task and can be improved in the signals analysis in the the digital level. The diagrammatic model developed, presented as a tool easy to use and understand, providing the conceptual organization needs of assistive technology

Obtenção e conservação de espermatozoides de cutia (Dasyprocta leporina Linneaus, 1753) do semiárido brasileiro

The general objective of this thesis was to stablish protocols to obtain and conserve agouti (Dasyprocta leporina) sperm bred in captivity in the Brazilian semi-arid, aiming its sustainable production. The thesis was divided in three experiments. In the first one, we studied the influence of the interaction between two probes (quadratics and sine waves) and two stimulation protocols (continuous and in series) on the agouti sperm collection by electroejaculation efficiency. The most efficient interaction on this obtainment was the one with probes with rings associated with stimuli in series (4/7; 57%, P<0.05). In the second experiment we compared the cryoprotectant effects of different substances (glycerol, ethyleneglycol, dimethylsulfoxide, dimethylformamide) on epididymis sperm cryopreservation. The highest values on motility (39.5±4.6%), vigor (2.9±0.2) and membrane integrity (30.6±4.5%) were observed on the samples cryopreserved using glycerol when compared to those with ethyleneglycol and dimethylformamide, but there was no difference (P>0.05) when compared to the samples cryopreserved with dimethylsulfoxide. At last, we studied the effects of the methods to obtain sperm (electroejaculation vs epididymal collection) on post thawing sperm quality. The samples obtained by epididymal retrograde flushing showed values for motility of 25.0±10.9% and vigor 2.4±0.8, and those obtained by electroejaculation had 31.2±14.2% of motility and vigor of 2.2±0.7, however, without statistical difference (P>0.05), which shows the possibility to successfully use the epididymal sperm cryopreservation protocol on agouti ejaculated sperm. In conclusion, significant advances on obtainment and processing of agouti sperm were made, allowing the establishment of germplasm banks from sperm samples obtained from the epididymis or by electroejaculation.

Tecnologia eletroquímica como tratamento alternativo de efluentes derivados da indústria têxtil e petroquímica

In this work, the treatment of wastewater from the textile industry, containing dyes as Yellow Novacron (YN), Red Remazol BR (RRB) and Blue Novacron CD (NB), and also, the treatment of wastewater from petrochemical industry (produced water) were investigated by anodic oxidation (OA) with platinum anodes supported on titanium (Ti/Pt) and boron-doped diamond (DDB). Definitely, one of the main parameters of this kind of treatment is the type of electrocatalytic material used, since the mechanisms and products of some anodic reactions depend on it. The OA of synthetic effluents containing with RRB, NB and YN were investigated in order to find the best conditions for the removal of color and organic content of the dye. According to the experimental results, the process of OA is suitable for decolorization of wastewaters containing these textile dyes due to electrocatalytic properties of DDB and Pt anodes. Removal of the organic load was more efficient at DDB, in all cases; where the dyes were degraded to aliphatic carboxylic acids at the end of the electrolysis. Energy requirements for the removal of color during OA of solutions of RRB, NB and YN depends mainly on the operating conditions, for example, RRB passes of 3.30 kWh m-3 at 20 mA cm-2 for 4.28 kWh m-3 at 60 mA cm-2 (pH = 1); 15.23 kWh m-3 at 20 mA cm-2 to 24.75 kWh m-3 at 60 mA cm-2 (pH 4.5); 10.80 kWh m-3 at 20 mA cm-2 to 31.5 kWh m-3 at 60 mA cm-2 (pH = 8) (estimated data for volume of treated effluent). On the other hand, in the study of OA of produced water effluent generated by petrochemical industry, galvanostatic electrolysis using DDB led to the complete removal of COD (98%), due to large amounts of hydroxyl radicals and peroxodisulphates generated from the oxidation of water and sulfates in solution, respectively. Thus, the rate of COD removal increases with increasing applied current density (15-60 mAcm-2 ). Moreover, at Pt electrode, approximately 50% removal of the organic load was achieved by applying from 15 to 30 mAcm-2 while 80% of COD removal was achieved for 60 mAcm-2 . Thus, the results obtained in the application of this technology were satisfactory depending on the electrocatalytic materials and operating conditions used for removal of organic load (petrochemical and textile effluents) as well as for the removal of color (in the case of textile effluents). Therefore, the applicability of electrochemical treatment can be considered as a new alternative like pretreatment or treatment of effluents derived from textiles and petrochemical industries.

Influência da pressão e da vazão de concentrado sobre o desempenho de ultrafiltração no pós-tratamento de esgotos

Despite the numerous advantages resulting from the use of membrane filters technology, intrinsic limitations fouling process become relevant to its applicability. The control of operating conditions is an important tool to mitigate fouling and achieve good levels of efficiency. In this sense, the objective of this study was to investigate the effect of transmembrane pressure and concentrate flow in the performance of ultrafiltration, applied to the post-treatment of domestic sewage. The process was evaluated and optimized by varying the pressure (0.5 and 1.5 bar) and the concentrate flow (300 and 600 L/h), using a 22 factorial design, in order to investigate the effects on the permeate flow and quality of effluents generated at each operating condition. We evaluated the following quality indicators for permeate: pH, electrical conductivity, total suspended solids, turbidity, calcium and Chemical Oxygen Demand (COD). In all tests, we observed marked reduction in the permeate flux at the early stages, followed by a slow decline that lasted until it reaches a relatively constant level, around 120 minutes of filtration. The increased pressure resulted in a higher initial permeate flux, but the decrease of the flow with time is greater for tests at higher pressure, indicating a more pronounced fouling process. On the other hand, increasing the concentrate flow resulted in a slower decline in permeate flux with the filtration time. Regarding the quality of permeate, the transmembrane pressure of 0,5 bar was the one that allowed better results, and was statistically confirmed through the two-way ANOVA test with repeated measures, significant effect of pressure on the turbidity of the permeate. The concentrate flow, in turn, showed no significant influence on any of the quality parameters. Thus, we conclude that, from an economic and environmental point of view, it is more interesting to operate ultrafiltration membrane system with a lower concentrate flow associated with a low transmembrane pressure, since under these conditions will produce less waste, and the permeate will present lower concentrations of the analyzed constituent, especially lower turbidity.

Análise do uso do Portal de Periódicos da CAPES na perspectiva de mestres e doutores formados pelo Programa de Pós-graduação em Administração da UFRN

The Brazilian CAPES Journal Portal aims to provide Information in Science and Technology (IST) for academic users. Thus, it is considered a relevant instrument for post-graduation dynamics and the country´s Science and Technology (S&T) development. Despite its importance, there are still few studies that focus on the policy analysis and efficiency of these resources. This research aims to fill in this gap once it proposes an analysis of the use of the CAPES Journal Portal done on behalf of the master´s and doctoral alumni of the Post Graduate Program in Management (PPGA) at the Federal University of Rio Grande do Norte (UFRN). The operationalization of the research´s main objective was possible through the specific objectives: characterize graduate profile as CAPES Journal Portal users b) identify motivation for the use of CAPES Journal Portal c) detect graduate satisfaction degree in information seeking done at CAPES Journal Portal d) verify graduate satisfaction regarding the use of the CAPES Journal Portal e) verify the use of the information that is obtained by graduates in the development of their academic activities. The research is of descriptive nature employing a mixed methodological strategy in which quantitative approach predominates. Data collection was done through a web survey questionnaire. Quantitative data analysis was made possible through the use of a statistical method. As for qualitative analysis, there was use of the Brenda Dervin´s sense-making approach as well as content analysis in open ended questions. The research samples were composed by 90 graduate students who had defended their dissertation/thesis in the PPGA program at UFRN in the time span of 2010-2013. This represented by 88% of this population. As for user profile, the analysis has made evident that there are no quantitative differences related to gender. There is predominance of male graduates that were aged 26 to 30 years old. As for female graduates, the great majority were 31 o 35 years old. Most graduates had Master´s degree scholarship in order to support their study. It was also seen that the great majority claim to use the Portal during their post graduation studies. The main reasons responsible for non use was: preference for the use of other data bases and lack of knowledge regarding the Portal. It was observed that the most used information resources were theses and dissertations. Data also indicate preference for complete text. Those who have used the Portal also claimed to have used other electronic information fonts in order to fulfill their information needs. The information fonts that were researched outside in the Portal were monographs, dissertations and thesis. Scielo was the most used information font. Results reveal that access and use of the Portal has been done in a regular manner during post graduation studies. But on the other hand, graduates also make use of other electronic information fonts in order to meet their information needs. The study also confirmed the important mission performed by the Portal regarding Brazilian scientific communication production. This was seen even though users have reported the need for improvement in some aspects such as: periodic training in order to promote, encourage and teach more effective use of the portal; investment aiming the expansion of Social Sciences Collection in the Portal as well as the need to implement continuous evaluation process related to user satisfaction in regarding the services provided.

Degradação de paracetamol empregando tecnologia oxidativa avançada baseada em fotocatálise heterogênea usando irradiação artificial e solar

In this work, the oxidation and mineralization of paracetamol, based in an advanced oxidative process promoted by heterogeneous photocatalysis, was evaluated. The action of two photocatalysts (titanium dioxide, and a composite based on the association between titanium dioxide and zinc phthalocyanine dye) was studied. First of all, experiments in laboratory scale were performed using as radiation font a 400 W high pressure mercury lamp. The mineralization of paracetamol, promoted by both photocatalysts, was evaluated working with 4L of solution containing 10 mg L-1 of paracetamol and 100 mg L-1 of photocatalyst. To find the best experimental conditions, the influence of hydrogen peroxide concentration and pH was evaluated for the reactions. The best results for the reactions in laboratory scale was obtained using 33,00 mg L-1 of hydrogen peroxide in natural pH (6,80). Under these conditions, 100% oxidation was reached in just 40 minutes of reaction using TiO2 P25, while the mineralization was 78%. Using the composite, the mineralization was 63% in 2 hours of reaction and a oxidation of almost 100% was reached after 60 minutes. A CPC reactor (compound parabolic concentrator) was employed in the expanded work scale, using the sun as irradiation source. In this case the experiments were performed using 50 L of aqueous solution containing 10 mg L-1 of paracetamol and 100 mg L-1 of photocatalyst. The assays were done at pH 3,00 and natural pH (6,80). The used concentration of hydrogen peroxide was 33,00 mg L-1, adopted after laboratory scale studies. The reaction at pH 3,00 shows to be more advantageous, since under natural pH (6,80), the use of deionized water was necessary to prepare the solutions, probably because the deleterious action of carbonate ions, known hydroxyl radical scavengers. Using solar irradiation, the reaction mediated by the composite was more efficient when compared with the assays under laboratory scale since the composite presents the advantage of promoting a better use of visible radiation. Under these conditions, the mineralization increased from 40% to 56% under pH 3,00. At natural pH the oxidation occurred more slowly and the mineralization decreased from 56% to 50%. Thus, the use of pH 3,00 will be more interesting in real scale applications, even if it is necessary the pH correction before the discard of the treated effluent to the environment.

Empreendedorismo tecnológico como opção da segunda carreira: pós-aposentadoria

Institutos de Ciência e Tecnologia são organizações que constroem grandes acervos de conhecimento de ponta, combinando conhecimento explicito e tácito decorrente da formação do pesquisador. Há potencial para que o empregado, em fase de aposentadoria, defina um novo curso de carreira, com foco na aplicação dos saberes de alto valor agregado. Este artigo se insere nesta categoria, descrevendo as estratégias oriundas dessas Instituições como uma oportunidade do empreendedorismo como opção de segunda carreira para os empregados que estão se aposentando e saindo da Instituição. Trata-se de uma pesquisa de natureza quantitativa, do tipo exploratório. Com o intuito de contribuir na política de recursos humanos, estimulando os programas de intraempreendedorismo e preparando os empregados para o empreendedorismo como uma opção de segunda carreira, uma das estratégias corporativa das instituições de pesquisa aplicada à transferência de tecnologia.

Experiências de Combate e a sua Relação com a Sintomatologia Associada à Perturbação Pós-Stress Traumático em Veteranos da Guerra Colonial Portuguesa

Objectivos: O presente estudo avaliou a relação entre diversos aspectos objectivos e subjectivos inerentes às experiências de combate/guerra e sintomatologia associada à Perturbação Pós-Stress Traumático. Os instrumentos de auto-resposta utilizados na colheita dos dados foram analisados quanto às suas principais propriedades psicométricas. Métodos: A amostra foi composta por 105 combatentes da Guerra Colonial Portuguesa. Foram utilizados os seguintes instrumentos de avaliação: um questionário sóciodemográfico de auto-resposta para a caracterização da amostra, o Posttraumatic Stress Disorder Checklist (para militares), o Peritraumatic Dissociative Experiences Questionnaire, o Questionário de Experiências de Combate e duas escalas do Deployment Risk and Resilience Inventory, nomeadamente a Difficult Livings and Working Environment Scale e a Perceived Threat Scale. Resultados: O estudo das qualidades psicométricas dos instrumentos apresenta uma consistência interna superior a .86 e uma estabilidade temporal superior a .79. A análise factorial do Peritraumatic Dissociative Experiences Questionnaire apresenta bons valores na medida de Kaiser-Meyer-Olkin e no teste de esfericidade de Bartlett. Na rotação de Varimax é extraído um factor, predizendo a sua unidimensionalidade, que explica cerca de 70% da variância total do questionário. Os resultados relativos à validade divergentediscriminante indicam, por si só, que esta se apresenta de forma clara entre os instrumentos estudados (PCL-M, PDEQ, DLWES e PTS) no subgrupo com PTSD, com excepção da verificada entre o PCL-M e o PDEQ.. Quanto à validade de critério, constatam-se diferenças entre os subgrupos com e sem PTSD. Através do método da regressão linear múltipla, duas das seis variáveis têm, isoladamente, um peso preditivo significativo para a PTSD, nomeadamente a frequência de exposição a situações típicas e objectivas de combate/ guerra e os desconfortos diários durante a(s) comissão(ões). Ao considerarmos as variáveis no seu conjunto, aquelas que mais contribuem são a dissociação peritraumática e os desconfortos diários durante a(s) comissão(ões). Conclusão: Constata-se que os factores peritraumáticos em estudo desempenham um importante papel no desenvolvimento da sintomatologia inerente à PTSD. /

Construção das capacidades organizacionais de tecnologia da informação no contexto dos sistemas institucionais integrados de gestão da UFRN

The IT capability is a organizational ability to perform activities of this role more effectively and an important mechanism in creating value. Its building process (stages of creation and development) occurs through management initiatives for improvement in the performance of their activities, using human resources and IT assets complementary responsible for the evolution of their organizational routines. This research deals with the IT capabilities related to SIG (integrated institutional management systems), built and deployed in UFRN (Universidade Federal do Rio Grande do Norte) to realization and control of administrative, academic and human resources activities. Since 2009, through cooperative agreements with federal and educational institutions of direct administration, UFRN has supported the implementation of these systems, currently involving more than 30 institutions. The present study aims to understand how IT capabilities, relevant in the design, implementation and dissemination of SIG, were built over time. This is a single case study of qualitative and longitudinal nature, performed by capturing, coding and analysis from secondary data and from semi-structured interviews conducted primarily with members of Superintenência de Informática, organizational unit responsible for SIG systems in UFRN. As a result, the technical, of internal relationship and external cooperation capabilities were identified as relevant in the successful trajectory of SIG systems, which have evolved in different ways. The technical capacity, initiated in 2004, toured the stages of creation and development until it reached the stage of stability in 2013, due to technological limits. Regarding the internal relationship capability, begun in 2006, it toured the stages of creation and development, having extended its scope of activities in 2009, being in development since then. Unlike the standard life cycle observed in the literature, the external cooperation capability was initiated by an intensity of initiatives and developments in the routines in 2009, which were decreasing to cease in 2013 in order to stabilize the technological infrastructure already created for cooperative institutions. It was still identified the start of cooperation in 2009 as an important event selection, responsible for changing or creating trajectories of evolution in all three capacities. The most frequent improvements initiatives were of organizational nature and the internal planning activity has been transformed over the routines of the three capabilities. Important resources and complementary assets have been identified as important for the realization of initiatives, such as human resources technical knowledge to the technical capabilities and external cooperation, and business knowledge, for all of them, as well as IT assets: the iproject application for control of development processes, and the document repository wiki. All these resources and complementary assets grew along the capacities, demonstrating its strategic value to SINFO/UFRN

A influência do processo de terceirização de tecnologia da informação na utilização dos modelos de contratação de serviços: um estudo de casos múltiplos

The change in the economic world and the emergence of Internet as a tool for communication and integration among the markets have forced organizations to adopt a different structure, process-oriented with a focus on information management. Thus, information technology has gained prominence in the organizational context, increasing its complexity and range of services provided by this function. Moreover, outsourcing has become an important model for flexible corporate structure, helping organizations to achieve better results when carrying out their activities and processes and be more competitive. To make the IT outsourcing, it is necessary to follow certain steps that range from strategic assessment to the management of outsourced service. Such steps can influence the form of contracting services, varying the types of service providers and contractors. Thus, the study aimed to identify how this IT outsourcing process influences the use of models for contracting services. For this, a study was conducted in multiple cases study involving two companies in Rio Grande do Norte State, specifically the health sector. Data collection was carried out with the CIOs of the companies surveyed through semi-structured interviews. According to the results obtained, it was found that the outsourcing process more structured influences the use of a more advanced contracting model. However, there are features found in these steps carrying more clearly this influence, as the goals pursued by outsourcing, the criteria used in selecting the supplier, a contract negotiation, how to transition services and the use of methods management, but can vary depending on the level of maturity in the relationship of the companies examined. Moreover, it was found that the use of contracting model may also influence how it is developed the IT outsourcing process, requiring or not its more formalized and organization

Aspectos do gerenciamento de riscos de tecnologia da informação nas empresas: um estudo de caso múltiplos

The information technology - IT- benefits have been more perceived during the last decades. Both IT and business managers are dealing with subjects like governance, IT-Business alignment, information security and others on their top priorities. Talking about governance, specifically, managers are facing it with a technical approach, that gives emphasis on protection against invasions, antivirus systems, access controls and others technical issues. The IT risk management, commonly, is faced under this approach, that means, has its importance reduced and delegated to IT Departments. On the last two decades, a new IT risk management perspective raised, bringing an holistic view of IT risk to the organization. According to this new perspective, the strategies formulation process should take into account the IT risks. With the growing of IT dependence on most of organizations, the necessity of a better comprehension about the subject becomes more clear. This work shows a study in three public organizations of the Pernambuco State that investigates how those organizations manage their IT risks. Structured interviews were made with IT managers, and later, analyzed and compared with conceptual categories found in the literature. The results shows that the IT risks culture and IT governance are weakly understood and implemented on those organizations, where there are not such an IT risk methodology formally defined, neither executed. In addition, most of practices suggested in the literature were found, even without an alignment with an IT risks management process