991 resultados para Linear variable filters
Resumo:
OBJECTIVE: Palliative sedation is a last resort medical act aimed at relieving intolerable suffering induced by intractable symptoms in patients at the end-of-life. This act is generally accepted as being medically indicated under certain circumstances. A controversy remains in the literature as to its ethical validity. There is a certain vagueness in the literature regarding the legitimacy of palliative sedation in cases of non-physical refractory symptoms, especially "existential suffering." This pilot study aims to measure the influence of two independent variables (short/long prognosis and physical/existential suffering) on the physicians' attitudes toward palliative sedation (dependent variable). METHODS: We used a 2 × 2 experimental design as described by Blondeau et al. Four clinical vignettes were developed (vignette 1: short prognosis/existential suffering; vignette 2: long prognosis/existential suffering; vignette 3: short prognosis/physical suffering; vignette 4: long prognosis/physical suffering). Each vignette presented a terminally ill patient with a summary description of his physical and psychological condition, medication, and family situation. The respondents' attitude towards sedation was assessed with a six-point Likert scale. A total of 240 vignettes were sent to selected Swiss physicians. RESULTS: 74 vignettes were completed (36%). The means scores for attitudes were 2.62 ± 2.06 (v1), 1.88 ± 1.54 (v2), 4.54 ± 1.67 (v3), and 4.75 ± 1.71 (v4). General linear model analyses indicated that only the type of suffering had a significant impact on the attitude towards sedation (F = 33.92, df = 1, p = 0.000). Significance of the results: The French Swiss physicians' attitude toward palliative sedation is more favorable in case of physical suffering than in existential suffering. These results are in line with those found in the study of Blondeau et al. with Canadian physicians and will be discussed in light of the arguments given by physicians to explain their decisions.
Resumo:
Global positioning systems (GPS) offer a cost-effective and efficient method to input and update transportation data. The spatial location of objects provided by GPS is easily integrated into geographic information systems (GIS). The storage, manipulation, and analysis of spatial data are also relatively simple in a GIS. However, many data storage and reporting methods at transportation agencies rely on linear referencing methods (LRMs); consequently, GPS data must be able to link with linear referencing. Unfortunately, the two systems are fundamentally incompatible in the way data are collected, integrated, and manipulated. In order for the spatial data collected using GPS to be integrated into a linear referencing system or shared among LRMs, a number of issues need to be addressed. This report documents and evaluates several of those issues and offers recommendations. In order to evaluate the issues associated with integrating GPS data with a LRM, a pilot study was created. To perform the pilot study, point features, a linear datum, and a spatial representation of a LRM were created for six test roadway segments that were located within the boundaries of the pilot study conducted by the Iowa Department of Transportation linear referencing system project team. Various issues in integrating point features with a LRM or between LRMs are discussed and recommendations provided. The accuracy of the GPS is discussed, including issues such as point features mapping to the wrong segment. Another topic is the loss of spatial information that occurs when a three-dimensional or two-dimensional spatial point feature is converted to a one-dimensional representation on a LRM. Recommendations such as storing point features as spatial objects if necessary or preserving information such as coordinates and elevation are suggested. The lack of spatial accuracy characteristic of most cartography, on which LRM are often based, is another topic discussed. The associated issues include linear and horizontal offset error. The final topic discussed is some of the issues in transferring point feature data between LRMs.
Resumo:
This report evaluates the use of remotely sensed images in implementing the Iowa DOT LRS that is currently in the stages of system architecture. The Iowa Department of Transportation is investing a significant amount of time and resources into creation of a linear referencing system (LRS). A significant portion of the effort in implementing the system will be creation of a datum, which includes geographically locating anchor points and then measuring anchor section distances between those anchor points. Currently, system architecture and evaluation of different data collection methods to establish the LRS datum is being performed for the DOT by an outside consulting team.
Resumo:
Linear spaces consisting of σ-finite probability measures and infinite measures (improper priors and likelihood functions) are defined. The commutative group operation, called perturbation, is the updating given by Bayes theorem; the inverse operation is the Radon-Nikodym derivative. Bayes spaces of measures are sets of classes of proportional measures. In this framework, basic notions of mathematical statistics get a simple algebraic interpretation. For example, exponential families appear as affine subspaces with their sufficient statistics as a basis. Bayesian statistics, in particular some well-known properties of conjugated priors and likelihood functions, are revisited and slightly extended
Resumo:
Variation in queen number alters the genetic structure of social insect colonies, which in turn affects patterns of kin-selected conflict and cooperation. Theory suggests that shifts from single- to multiple-queen colonies are often associated with other changes in the breeding system, such as higher queen turnover, more local mating, and restricted dispersal. These changes may restrict gene flow between the two types of colonies and it has been suggested that this might ultimately lead to sympatric speciation. We performed a detailed microsatellite analysis of a large population of the ant Formica selysi, which revealed extensive variation in social structure, with 71 colonies headed by a single queen and 41 by multiple queens. This polymorphism in social structure appeared stable over time, since little change in the number of queens per colony was detected over a five-year period. Apart from queen number, single- and multiple-queen colonies had very similar breeding systems. Queen turnover was absent or very low in both types of colonies. Single- and multiple-queen colonies exhibited very small but significant levels of inbreeding, which indicates a slight deviation from random mating at a local scale and suggests that a small proportion of queens mate with related males. For both types of colonies, there was very little genetic structuring above the level of the nest, with no sign of isolation by distance. These similarities in the breeding systems were associated with a complete lack of genetic differentiation between single- and multiple-queen colonies, which provides no support for the hypothesis that change in queen number leads to restricted gene flow between social forms. Overall, this study suggests that the higher rates of queen turnover, local mating, and population structuring that are often associated with multiple-queen colonies do not appear when single- and multiple-queen colonies still coexist within the same population, but build up over time in populations consisting mostly of multiple-queen colonies.
Resumo:
O objetivo deste trabalho foi determinar o tamanho de amostra para a estimação do coeficiente de correlação linear de Pearson entre caracteres de três híbridos de milho. Para as análises, foram tomadas aleatoriamente 361, 373 e 416 plantas, respectivamente, de híbridos simples, triplo e duplo. Para cada planta, os seguintes caracteres foram mensurados: diâmetro maior e menor do colmo, altura da planta e altura, peso, comprimento e diâmetro da espiga, número de fileiras por espiga, peso e diâmetro de sabugo, massa de cem grãos, número de grãos por espiga, comprimento e produtividade de grãos. Para cada um dos 91 pares de caracteres e híbridos, foi determinado o tamanho de amostra a partir de "bootstrap", com reposição de 1.000 amostras, de cada tamanho de amostra simulado. Na estimação do coeficiente de correlação linear de Pearson com a mesma precisão, o tamanho de amostra (número de plantas) aumenta na direção de pares de caracteres com menor intensidade de relação linear, independentemente do tipo de híbrido. Para os 91 pares de caracteres estudados, 252 plantas são suficientes para a estimação do coeficiente de correlação linear de Pearson, no intervalo de confiança de "bootstrap" de 95%, igual a 0,30
Resumo:
Background Nowadays, combining the different sources of information to improve the biological knowledge available is a challenge in bioinformatics. One of the most powerful methods for integrating heterogeneous data types are kernel-based methods. Kernel-based data integration approaches consist of two basic steps: firstly the right kernel is chosen for each data set; secondly the kernels from the different data sources are combined to give a complete representation of the available data for a given statistical task. Results We analyze the integration of data from several sources of information using kernel PCA, from the point of view of reducing dimensionality. Moreover, we improve the interpretability of kernel PCA by adding to the plot the representation of the input variables that belong to any dataset. In particular, for each input variable or linear combination of input variables, we can represent the direction of maximum growth locally, which allows us to identify those samples with higher/lower values of the variables analyzed. Conclusions The integration of different datasets and the simultaneous representation of samples and variables together give us a better understanding of biological knowledge.
Resumo:
This report proposes, that for certain types of highway construction projects undertaken by the Iowa Department of Transportation, a scheduling technique commonly referred to as linear scheduling may be more effective than the Critical Path Method scheduling technique that is currently being used. The types of projects that appear to be good candidates for the technique are those projects that have a strong linear orientation. Like a bar chart, this technique shows when an activity is scheduled to occur and like a CPM schedule it shows the sequence in which activities are expected to occur. During the 1992 construction season, the authors worked with an inlay project on Interstate 29 to demonstrate the linear scheduling technique to the Construction Office. The as-planned schedule was developed from the CPM schedule that the contractor had developed for the project. Therefore, this schedule represents what a linear representation of a CPM schedule would look like, and not necessarily what a true linear schedule would look like if it had been the only scheduling technique applied to the project. There is a need to expand the current repertoire of scheduling techniques to address those projects for which the bar chart and CPM may not be appropriate either because of the lack of control information or due to overly complex process for the actual project characteristics. The scheduling approaches used today on transportation projects have many shortcomings for properly modeling the real world constraints and conditions which are encountered. Linear project's predilection for activities with variable production rates, a concept very difficult to handle with the CPM, is easily handled and visualized with the linear technique. It is recommended that work proceed with the refinement of the method of linear scheduling described above and the development of a microcomputer based system for use by the Iowa Department of Transportation and contractors for its implementation. The system will be designed to provide the information needed to adjust schedules in a rational understandable method for monitoring progress on the projects and alerting Iowa Department of Transportation personnel when the contractor is deviating from the plan.
Resumo:
Background: Elevated urinary calcium excretion is associated with reduced bone mineral density. Population-based data on urinary calcium excretion are scarce. We explored the association of serum calcium and circulating levels of vitamin D (including 25(OH)D2 and 25(OH)D3) with urinary calcium excretion in men and women in a population-based study. Methods: We used data from the "Swiss Survey on Salt" conducted between 2010 and 2012 and including people aged 15 years and over. Twenty-four hour urine collection, blood analysis, clinical examination and anthropometric measures were collected in 11 centres from the 3 linguistic regions of Switzerland. Vitamin D was measured centrally using liquid chromatography - tandem mass spectrometry. Hypercalciuria was defined as urinary calcium excretion >0.1 mmol/kg/24h. Multivariable linear regression was used to explore factors associated with 24-hour urinary calcium excretion (mmol/24h) squared root transformed, taken as the dependant variable. Vitamin D was divided into monthspecific tertiles with the first tertile having the lowest value and the third tertile having the highest value. Results: The 669 men and 624 women had mean (SD) age of 49.2 (18.1) and 47 (17.9) years and a prevalence of hypercalciuria of 8.9% and 8.0%, respectively. In adjusted models, the association of urinary calcium excretion with protein-corrected serum calcium was (β coefficient } standard error, according to urinary calcium squared root transformed) 1.125 } 0.184 mmol/L per square-root (mmol/24h) (P<0.001) in women and 0.374 } 0.224 (P=0.096) in men. Men in the third month-specific vitamin D tertile had higher urinary calcium excretion than men in the first tertile (0.170 } 0.05 nmol/L per mmol/24h, P=0.001) and the corresponding association was 0.048 } 0.043, P= 0.272 in women. Conclusion: About one in eleven person has hypercalciuria in the Swiss population. The positive association of serum calcium with urinary calcium excretion was steeper in women than in men, independently of menopausal status. Circulating vitamin D was associated positively with urinary calcium excretion only in men. The reasons underlying the observed sex differences in the hormonal control of urinary calcium excretion need to be explored in further studies.
Resumo:
[Abstract]
Resumo:
We present measurements of hydrogen and oxygen isotopes in MORB glasses from Macquarie Island (SW. Pacific Ocean) coupled with determination of bulk H2O content by two independent techniques: total dehydration and FTIR. The incompatible trace elements in these glasses vary by a factor of 12 to 17, with K2O varying from 0.1 to 1.7 wt.%; these ranges reflect a variable degree of closed-system mantle melting, estimated from 1 to 15%. Water concentrations determined by the two techniques match well, yielding a range from 0.25 to 1.49 wt.% which correlates positively with all of the measured incompatible trace elements, suggesting that water is un-degassed, and behaves conservatively during mantle melting. Also, the agreement between the FTIR-determined and extracted water contents gives us confidence that the measured isotopic values of hydrogen reflect that of the mantle. Comparison of the range of water content with that of other incompatible trace elements allows estimation of the water partition coefficient in lherzolite, 0.0208 (ranging from 0.017 to 0.023), and the water content in the source, 386 ppm (ranging from 370 to 440 ppm). We observe a fairly narrow range in delta D and delta O-18 values of -75.5 +/- 4.5 parts per thousand and 5.50 +/- 0 .05 parts per thousand respectively, that can be explained by partial melting of normal lherzolitic mantle. The measured delta D and delta O-18 values of Macquarie Island glasses that range from nepheline- to hypersthene-normative, and from MORB to EMORB in composition, are identical to those in average global MORB. The observed lack of variation of delta D and delta O-18 with 1 to 15% degree of mantle melting is consistent with a bulk melting model of delta D and delta O-18 fractionation, in which water is rapidly scavenged into the first partial melt. The narrow ranges of delta D and delta O-18 in normal mantle are mostly due to the buffering effect of clino- and orthopyroxenes in the residual assemblage; additionally, fast ``wet'' diffusion of oxygen and hydrogen isotopes through the melting regions may further smooth isotopic differences. (C) 2012 Elsevier B.V. All rights reserved.
Resumo:
This paper presents the general regression neural networks (GRNN) as a nonlinear regression method for the interpolation of monthly wind speeds in complex Alpine orography. GRNN is trained using data coming from Swiss meteorological networks to learn the statistical relationship between topographic features and wind speed. The terrain convexity, slope and exposure are considered by extracting features from the digital elevation model at different spatial scales using specialised convolution filters. A database of gridded monthly wind speeds is then constructed by applying GRNN in prediction mode during the period 1968-2008. This study demonstrates that using topographic features as inputs in GRNN significantly reduces cross-validation errors with respect to low-dimensional models integrating only geographical coordinates and terrain height for the interpolation of wind speed. The spatial predictability of wind speed is found to be lower in summer than in winter due to more complex and weaker wind-topography relationships. The relevance of these relationships is studied using an adaptive version of the GRNN algorithm which allows to select the useful terrain features by eliminating the noisy ones. This research provides a framework for extending the low-dimensional interpolation models to high-dimensional spaces by integrating additional features accounting for the topographic conditions at multiple spatial scales. Copyright (c) 2012 Royal Meteorological Society.
Resumo:
The objective of this work was to assess the degree of multicollinearity and to identify the variables involved in linear dependence relations in additive-dominant models. Data of birth weight (n=141,567), yearling weight (n=58,124), and scrotal circumference (n=20,371) of Montana Tropical composite cattle were used. Diagnosis of multicollinearity was based on the variance inflation factor (VIF) and on the evaluation of the condition indexes and eigenvalues from the correlation matrix among explanatory variables. The first model studied (RM) included the fixed effect of dam age class at calving and the covariates associated to the direct and maternal additive and non-additive effects. The second model (R) included all the effects of the RM model except the maternal additive effects. Multicollinearity was detected in both models for all traits considered, with VIF values of 1.03 - 70.20 for RM and 1.03 - 60.70 for R. Collinearity increased with the increase of variables in the model and the decrease in the number of observations, and it was classified as weak, with condition index values between 10.00 and 26.77. In general, the variables associated with additive and non-additive effects were involved in multicollinearity, partially due to the natural connection between these covariables as fractions of the biological types in breed composition.