Seasonal Changes in Chemical Composition of Eurasion Watermilfoil (Myriophyllum spicatum L.) and Water Temperature at Two Sites in northern California: implications for Herbivory

We compared seasonal changes in Eurasian watermilfoil (Myriophyllum spicatum L.) characteristics and water temperature for a shallow poind in Davis, CA, and the Truckee River, near Tahoe City, CA. Tissue C and N were 15% lower in plants from the Truckee River than in plants from the Davis pond. Seasonal fluctuations in tissue N were also different. Mean phenolic acid content of Truckee River palnts (162yM g-1) was less than those from the shallow pond (195 yM g-1). Phenolic acid content was positively related to tissue C for Truckee River and Davis pond plants and, tissue C:N ratio for Truckee River plants. Mean monthly water temperature (1990 to 1998) for the Truckee River site was less than 20 C. Water temperatures were warmer in August and September at this site. However, Eurasian watermilfoil collected during these months was characterized by lower levels of tissue N. During a 29-month period beginning January 1994, mean monthly water temperature for the Davis pond exceeded 20 C, only during July to September 1995. Tissue N was generally greater during summer for watermilfoil growing in the pond. These results imply that Eurasian watermilfoil biological control agents may have different developmental rates in these habitats, and thus different impacts on watermilfoil populations.

Association analyses of DNA polymorphisms in bovine SREBP-1, LXRα,FADS1 genes with fatty acid composition in Canadian commercial crossbred beef steers

Two previously reported DNA polymorphisms of sterol regulatory element binding transcription factor 1 (SREBP1) and liver X receptor alpha (LXRα) and two DNA polymorphisms of fatty acid desaturase 1 (FADS1) were evaluated for associations with fatty acids in brisket adipose tissue of Canadian cross-bred beef steers. The polymorphism of 84 bp insert/deletion in intron 5 of SREBP1 was significantly associated with the concentration of 9c C17:1 (P=0.013). The G>A single nucleotide polymorphism (SNP) in the exon 4 of LXRα gene was associated with the concentration of 9c, 11t C18:2 (P=0.04), sum of conjugated linoleic acids (CLA) (P=0.025) and 11c C20:1(P=0.042). Two DNA polymorphisms in the promoter region of FADS1, deletion/insertion of ->GTG in rs133053720 and SNP A>G in rs42187276, were significantly associated with concentrations of C17:0 iso, C17:0 ai, total branched chain fatty acids (BFA), 12t C18:1, 13t/14t C18:1, 15t C18:1, and 13c C18:1 (P<0.05). Further studies are needed to validate the associations and to delineate the roles of the gene polymorphisms in determining the fatty acid composition in beef tissues.

Length of concentrate finishing affects the fatty acid composition of grass-fed andgenetically lean beef: an emphasis on trans-18:1 and conjugated linoleic acid profiles

2.4. The author may post the VoR version of the article (in PDF or HTML form) in the Institutional Repository of the institution in which the author worked at the time the article was first submitted, or (for appropriate journals) in PubMed Central or UK PubMed Central or arXiv, no sooner than one year after first publication of the article in the Journal, subject to file availability and provided the posting includes a prominent statement of the full bibliographical details, a copyright notice in the name of the copyright holder (Cambridge University Press or the sponsoring Society, as appropriate), and a link to the online edition of the Journal at Cambridge Journals Online.

A Finite Element Analysis of a Crack Penetrating or Deflecting into an Interface in a Thin Laminate

The crack tip driving force of a crack growing from a pre-crack that is perpendicular to and terminating at an interface between two materials is investigated using a linear fracture mechanics theory. The analysis is performed both for a crack penetrating the interface, growing straight ahead, and for a crack deflecting into the interface. The results from finite element calculations are compared with asymptotic solutions for infinitesimally small crack extensions. The solution is found to be accurate even for fairly large amounts of crack growth. Further, by comparing the crack tip driving force of the deflected crack with that of the penetrating crack, it is shown how to control the path of the crack by choosing the adhesion of the interface relative to the material toughness.

Effects of Thermocapillary Convection on the Growth Process in Industrial 8-inch Silicon Czochralski Growth

Czochralski (CZ) crystal growth process is a widely used technique in manufacturing of silicon crystals and other semiconductor materials. The ultimate goal of the IC industry is to have the highest quality substrates, which are free of point defect, impurities and micro defect clusters. The scale up of silicon wafer size from 200 mm to 300 mm requires large crucible size and more heat power. Transport phenomena in crystal growth processes are quite complex due to melt and gas flows that may be oscillatory and/or turbulent, coupled convection and radiation, impurities and dopant distributions, unsteady kinetics of the growth process, melt crystal interface dynamics, free surface and meniscus, stoichiometry in the case of compound materials. A global model has been developed to simulate the temperature distribution and melt flow in an 8-inch system. The present program features the fluid convection, magnetohydrodynamics, and radiation models. A multi-zone method is used to divide the Cz system into different zones, e.g., the melt, the crystal and the hot zone. For calculation of temperature distribution, the whole system inside the stainless chamber is considered. For the convective flow, only the melt is considered. The widely used zonal method divides the surface of the radiation enclosure into a number of zones, which has a uniform distribution of temperature, radiative properties and composition. The integro-differential equations for the radiative heat transfer are solved using the matrix inversion technique. The zonal method for radiative heat transfer is used in the growth chamber, which is confined by crystal surface, melt surface, heat shield, and pull chamber. Free surface and crystal/melt interface are tracked using adaptive grid generation. The competition between the thermocapillary convection induced by non-uniform temperature distributions on the free surface and the forced convection by the rotation of the crystal determines the interface shape, dopant distribution, and striation pattern. The temperature gradients on the free surface are influenced by the effects of the thermocapillary force on the free surface and the rotation of the crystal and the crucible.

Size composition of catches of Yellowfin tuna in the Japanese long-line fishery in the eastern tropical Pacific east of 130°W

ENGLISH (pgs. 267-283): In the spring of 1963, the senior author, who is a member of the staff of the Nankai Regional Fisheries Research. Laboratory, Fisheries Agency, Japanese Government, came to the Institute of Marine Resources of the University of California as a visiting investigator, bringing with him catch statistical data from the fishery in the eastern Pacific, which had been collected at the Nankai Regional Fisheries Research Laboratory (NRFRL) through September 1962, in order to conduct studies of these data in collaboration with the junior author, and with investigators of the InterAmerican Tropical Tuna Commission. A general review of the long-line fishery, based on the catch statistics of the commercial fishing fleet has been published by Suda and Schaefer (1965). In this paper we present an analysis of data respecting the size-composition of yellowfin tuna taken on long-line gear throughout the eastern Pacific between 1958 and 1962, and make some comparisons with data on size-composition of yellowfin tuna taken in the near-surface fishery, by bait boats and purse-seiners, in waters adjacent to the American coast. As has been shown by Suda and Schaefer (1965), the long-line fishery in the eastern Pacific is primarily directed toward the capture of bigeye tuna. However, considerable quantities of yellowfin tuna are also taken on this gear, and, in addition, there are substantial catches of albacore and of several species of spearfishes in some parts of the range of this fishery. Information respecting the catch rates of yellowfin tuna, and information respecting the size-composition of the stock of yellowfin tuna being exploited by the long-line fishery, is of particular interes~" because the yellowfin tuna population of the eastern Pacific is also subject to an intensive fishery by baitboats and purse-seiners which capture this species, together with skipjack, near the surface along the coast of the Americas, and around the outlying islands, in the region of California to northern Chile. SPANISH (pgs. 311-329): En la primavera de 1963, el autor principal, quien es miembro del personal del Nankai Regional Fisheries Research Laboratory, Fisheries Agency del gobierno japonés, vino al Institute of Marine Resources de la Universidad de California en calidad de investigador visitante y trajo consigo datos estadísticos de las capturas de la pesquería en el Pacífico oriental, que habían sido recolectados en el Nankai Regional Fisheries Research Laboratory (NRFRL) hasta septiembre de 1962, con el fin de hacer estudios de esos datos en colaboración con el coautor y con investigadores de la Comisión Interamericana del Atún Tropical. Una revisión general de la pesquería con palangre, basada sobre las estadísticas de captura de la flota pesquera comercial, ha sido publicada por Suda y Schaefer (1965). En este trabajo presentamos un análisis de los datos correspondientes a la composición de tamaños del atún aleta amarilla capturado con equipo palangrero en todo el Pacífico oriental, entre 1958 y 1962, y hacemos algunas comparaciones con los datos sobre la composición de tamaños del atún aleta amarilla cogido en la pesquería superficial cercana, por barcos de carnada y rederos en aguas adyacentes a la costa americana. Como ha sido demostrado por Suda y Schaefer (1965) la pesquería con palangre en el Pacífico oriental tiene como principal objeto la captura del atún ojo grande. Sin embargo, considerables cantidades de atún aleta amarilla son capturadas también por este equipo y, además, hay también considerables capturas de albacora y de diversas especies de peces-espada en algunas partes de la región que abarca esta pesquería. La información respecto a las tasas de captura del atún aleta amarilla, y la relativa a la composición de tamaños del stock de esta especie que explota la pesquería con palangre, es de particular interés, a causa de que la población de atún aleta amarilla del Pacífico oriental es también objeto de una pesca intensiva por barcos de carnada y rederos que capturan esta especie, junto con el barrilete, cerca de la superficie a 10 largo de la costa de las Américas y alrededor de las islas mar afuera, en la región desde California hasta el norte de Chile.

The Effect of the Thickness of Fe2 Al5 Phase Layer at Fe/Al Interface on the Mechanics Behavior of Hot Dip Aluminizing Coating

Hot Dip Aluminized Coatings with different thickness were prepared on Q235 steel in aluminum solutions with different temperature for certain time. Through tensile tests and in-situ SEM observations, the effect of the coating's microstructure on the tensile strength of the samples was studied. It was disclosed at certain aluminum solution temperature,transaction layers mainly composed of Fe2 Al5 phase got thicker with time prolonging, and this changed initial crack's extending direction from parallel with to vertical with stretching direction. The change in crack direction decreased tensile strength of samples, thus made the coating easy to break. It was concluded that the existence of thick Fe2 Al5 phase layer was the basic reason for the lowering of tensile strength of the coating.

Investigations of cohesive zone properties of the interface between metal film and ceramic substrate at nano- and micro-scales

Cohesive zone characterizations of the interface between metal film and ceramic substrate at micro- and nano-scales are performed in the present research. At the nano-scale, a special potential for special material interface (Ag/MgO) is adopted to investigate the interface separation mechanism by using MD simulation, and stress-separation relationship will be obtained. At the micro-scale, peeling experiment is performed for the Al film/Al2O3 substrate system with an adhesive layer at the interface. Adhesive is a mixture of epoxy and polyimide with mass ratio 1:1, by which a brittle cohesive property is obtained. The relationships between energy release rate, the film thickness and the adhesive layer thickness are measured during the steady-state peeling. The experimental result has a similar trend as modeling result for a weak adhesion interface case.

Subsonic interface crack with crack face contact

A steady-state subsonic interface crack propagating between an elastic solid and a rigid substrate with crack face contact is studied. Two cases with respective to the contact length are considered, i.e., semi-infinite and finite crack face contact. Different from a stationary or an open subsonic interface crack, stress singularity at the crack tip in the present paper is found to be non-oscillatory. Furthermore, in the semi-infinite contact case, the singularity of the stress field near the crack tip is less than 1/2. In the finite contact case, no singularity exists near the crack tip, but less than 1/2 singularity does at the end of the contact zone. In both cases, the singularity depends on the linear contact coefficient and the crack speed. Asymptotic solutions near the crack tip are given and analyzed. In order to satisfy the contact conditions, reasonable region of the linear contact coefficient is found. In addition, the solution predicts a non-zero-energy dissipation rate due to crack face contact.

Interface cracking and particulate size effect in particle-reinforced metal-matrix composites

The mechanical behaviors of the ceramic particle-reinforced metal matrix composites are modeled based on the conventional theory of mechanism-based strain gradient plasticity presented by Huang et al. Two cases of interface features with and without the effects of interface cracking will be analyzed, respectively. Through comparing the result based on the interface cracking model with experimental result, the effectiveness of the present model can be evaluated. Simultaneously, the length parameters included in the strain gradient plasticity theory can be obtained.

Size and year class composition of catch, age and growth of yellowfin tuna in the Eastern Tropical Pacific Ocean for the years 1954-1958

ENGLISH: Data on the size composition of catch for the years 1954-1958 have been studied to determine year class composition, age and growth of yellowfin tuna in the Eastern Tropical Pacific Ocean. Direct age determination of tropical tunas has not yet proven reliable; however, this analysis has shown that the length-frequency distributions themselves are adequate to determine year class structure and growth rates. Absolute age has been estimated by comparing the average time of spawning with the time at which age groups initially appear in the catch. SPANISH: Los datos sobre la composición del tamaño de la pesca durante los años 1954-1958 han sido estudiados con el objeto de determinar la composición de las clases anuales, la edad y el crecimiento del atún aleta amarilla en el Océano Pacífico Oriental Tropical. Las determinaciones directas de la edad de los atunes tropicales no han probado todavía ser de confianza; sin embargo, este análisis ha demostrado que las distribuciones de la frecuencia de las longitudes son adecuadas para determinar la estructura de las clases anuales y de las tasas de crecimiento. La edad absoluta ha sido estimada mediante la comparación de la época promedio de desove con la epoca en que los grupos de edades comienzan a aparecer en la pesca.