Consent and the use of force: an examination of ‘intervention by invitation’ as a basis for US drone strikes in Pakistan, Somalia and Yemen

Drone strikes are becoming a key feature of the United States’ global military response to nonstate actors, and it has been widely adduced that these strikes have been carried out with the consent of the host states in which such non-state actors reside. This article examines the degree to which assertions of consent (or ‘intervention by invitation’), provided as a justification for drone strikes by the United States in Pakistan, Yemen and Somalia, can be said to accord with international law. First the article provides a broad sketch of the presence of consent in international law. It then analyses in detail the individual elements of consent as provided by Article 20 of the International Law Commission Draft Articles of State Responsibility. These require that consent should be ‘valid’, given by the legitimate government and expressed by an official empowered to do so. These elements will be dealt with individually, and each in turn will be applied to the cases of Pakistan, Yemen and Somalia. Finally, the article will examine the breadth of the exculpatory power of consent, and the extent to which it can preclude the wrongfulness of acts carried out in contravention of international law other than the prohibition of the use of force under Article 2(4) of the Charter of the United Nations.

Corticomuscular coherence modulation with the pattern of finger force coordination

We assess the corticomuscular coherence (CMC) of the contralateral primary motor cortex and the hand muscles during a finger force-tracking task and explore whether the pattern of finger coordination has an impact on the CMC level. Six healthy subjects (three men and three women) were recruited to conduct the force-tracking tasks comprising two finger patterns, i.e., natural combination of index and middle fingers and unnatural combination of index and middle fingers (i.e., simultaneously producing equal force strength in index and middle finger). During the conducting of the tasks with right index and middle finger, MEG and sEMG signals were recorded from left primary motor cortex (M1) and right flexor digitorum superficialis (FDS), respectively; the contralateral CMC was calculated to assess the neuromuscular interaction. Finger force-tracking tasks of Common-IM only induce beta-band CMC, whereas Uncommon-IM tasks produce CMC in both beta and low-gamma band. Compared to the force-tracking tasks of Common-IM, the Uncommon-IM task is associated with the most intensive contralateral CMC. Our study demonstrated that the pattern of finger coordination had significant impact on the CMC between the contralateral M1 and hand muscles, and more corticomuscular interaction was necessary for unnaturally coordinated finger activities to regulate the fixed neural drive of hand muscles.

DENSITY PROFILE, VELOCITY ANISOTROPY, AND LINE-OF-SIGHT EXTERNAL CONVERGENCE OF SLACS GRAVITATIONAL LENSES

Data from 58 strong-lensing events surveyed by the Sloan Lens ACS Survey are used to estimate the projected galaxy mass inside their Einstein radii by two independent methods: stellar dynamics and strong gravitational lensing. We perform a joint analysis of these two estimates inside models with up to three degrees of freedom with respect to the lens density profile, stellar velocity anisotropy, and line-of-sight (LOS) external convergence, which incorporates the effect of the large-scale structure on strong lensing. A Bayesian analysis is employed to estimate the model parameters, evaluate their significance, and compare models. We find that the data favor Jaffe`s light profile over Hernquist`s, but that any particular choice between these two does not change the qualitative conclusions with respect to the features of the system that we investigate. The density profile is compatible with an isothermal, being sightly steeper and having an uncertainty in the logarithmic slope of the order of 5% in models that take into account a prior ignorance on anisotropy and external convergence. We identify a considerable degeneracy between the density profile slope and the anisotropy parameter, which largely increases the uncertainties in the estimates of these parameters, but we encounter no evidence in favor of an anisotropic velocity distribution on average for the whole sample. An LOS external convergence following a prior probability distribution given by cosmology has a small effect on the estimation of the lens density profile, but can increase the dispersion of its value by nearly 40%.

Quantized fields and gravitational particle creation in f (R) expanding universes

The problem of cosmological particle creation for a spatially flat, homogeneous and isotropic universes is discussed in the context of f (R) theories of gravity. Different from cosmological models based on general relativity theory, it is found that a conformal invariant metric does not forbid the creation of massless particles during the early stages (radiation era) of the universe. (C) 2010 Elsevier B.V. All rights reserved.

Shape and size of red blood cells from the Pygoscelid penguins of Antarctica using atomic force microscopy

Antarctic biodiversity is evolutionarily complex, reflecting the extreme ambient conditions. Therefore, Antarctic organisms exhibit sophisticated adaptations in all organization levels, including organs, tissues, and cells. Since red blood cells (RBCs) travel through the vertebrates blood delivering O(2) to all tissues and organs and purging the unwanted CO(2), they represent an interesting model to investigate biological adaptations. We have used atomic force microscopy (AFM) to compare the shape and size of RBCs of the Pygoscelid penguins. A total of 18 landmarks were measured in AFM images. When analyzed individually, the parameters were not capable of discriminating the RBCs of each species. However, the simultaneous use of multiple parameters discriminated (74%) among the RBCs. In addition, the use of RBC measurements was sufficient to hierarchically cluster the species in accordance to other common and reliable phylogenetic strategies. In light of these results, the use of RBC characters could effectively benefit taxonomic inferences.

The Schenberg spherical gravitational wave detector: the first commissioning runs

Here we present a status report of the first spherical antenna project equipped with a set of parametric transducers for gravitational detection. The Mario Schenberg, as it is called, started its commissioning phase at the Physics Institute of the University of Sao Paulo, in September 2006, under the full support of FAPESP. We have been testing the three preliminary parametric transducer systems in order to prepare the detector for the next cryogenic run, when it will be calibrated. We are also developing sapphire oscillators that will replace the current ones thereby providing better performance. We also plan to install eight transducers in the near future, six of which are of the two-mode type and arranged according to the truncated icosahedron configuration. The other two, which will be placed close to the sphere equator, will be mechanically non-resonant. In doing so, we want to verify that if the Schenberg antenna can become a wideband gravitational wave detector through the use of an ultra-high sensitivity non-resonant transducer constructed using the recent achievements of nanotechnology.

Kraftutveckling för manuella trädfällningsredskap : Force development for manual tree felling tools

The objective with this study has been to build general models of the mechanics in tree felling with chain-saw and to compare felling torque for different tools. The theoretical models are completed and validated with a comparative study. The study includes a great number of felling tools of which some are used with different methods. Felling torque was measured using a naturally like measuring arrangement where a tree is cut at about 3.7 m height and then anchored with a dynamometer to a tree opposite to the felling direction. Notch and felling cut was made as ordinary with exception that the hinge was made extra thin to reduce bending resistance. The tree was consequently not felled during the trials and several combinations of felling tools and individuals could be used on the same tree.The results show big differences between tools, methods and persons. The differences were, however, not general, but could vary depending on conditions (first of all tree diameters). Tools and methods that push or pull on the stem are little affected by the size of the tree, while tools that press on the stump are very much dependent of a large stump-diameter. Hand force asserted on a simple pole is consequently a powerful tool on small trees. For trees of medium size there are several alternative methods with different sizes and brands of felling levers and wedges. Larger and more ungainly tools and methods like tree pusher, winch, etc. develop very high felling torque on all tree sizes. On large trees also the felling wedge and especially the use of several wedges together develop very high felling torque.

Gravitational self-localization for spherical masses

In this work, I consider the center-of-mass wave function for a homogenous sphere under the influence of the self-interaction due to Newtonian gravity. I solve for the ground state numerically and calculate the average radius as a measure of its size. For small masses, M≲10−17 kg, the radial size is independent of density, and the ground state extends beyond the extent of the sphere. For masses larger than this, the ground state is contained within the sphere and to a good approximation given by the solution for an effective radial harmonic-oscillator potential. This work thus determines the limits of applicability of the point-mass Newton Schrödinger equations for spherical masses. In addition, I calculate the fringe visibility for matter-wave interferometry and find that in the low-mass case, interferometry can in principle be performed, whereas for the latter case, it becomes impossible. Based on this, I discuss this transition as a possible boundary for the quantum-classical crossover, independent of the usually evoked environmental decoherence. The two regimes meet at sphere sizes R≈10−7 m, and the density of the material causes only minor variations in this value.

Localization strategies of multinationals in Brazil which characteristics of the Brazilian market force multinational companies to localize their marketing activities?

Uma vez que as perspectivas de crescimento económico nos países mais desenvolvidos, como a Europa, os EUA eo Japão estão diminuindo, os mercados emergentes têm se tornado cada vez mais importante para muitas empresas multinacionais. Brasil, Rússia, Índia e China (BRICs) são agora os principais mercados em crescimento em todo o mundo e as empresas estão buscando estratégias para explorar ao máximo o potencial de consumo promissor nessas regiões. Um dos modos mais elaborados de prosseguir essa estratégia é conhecida como "localização" - uma adaptação das práticas de negócios (ao longo de toda a cadeia de suprimentos) com as preferências e condições locais. Este artigo é projetado para analisar as atividades de localização de empresas multinacionais no Brasil. O foco da análise é o de investigar as características do mercado brasileiro, que induzem as multinacionais a localizar o seu marketing mix (composto de produto, preço, colocação e promoção). Em dois estudos de casos com a empresa Suiça Nestlé e a empresa Alemã Volkswagen vários padrões de localização foram no mercado consumidor brasileiro. Os quatro resultados mais significativos da análise são os diferentes padrões sociais o Brasil, que forçar as empresas a reformular certas funções do seu mix de marketing (por exemplo, a colocação no caso da Nestlé), a aceitação dos consumidores brasileiros a pagar preços relativamente elevados (por exemplo, taxas de Volkswagen até 100% mais por seus produtos em relação à Alemanha); o enorme tamanho do Brasil ea infra-estrutura deficiente, que exigem uma abordagem de distribuição localizada; eo caráter atualmente ainda menos exigente dos estratos de consumidores brasileiros emergentes, que permitem às empresas oferecer produtos menos sofisticados em comparação aos mercados europeus.

Perceções acerca do impacto da prática desportiva: um estudo de caso com atletas de competição da escola Dragon Force Madeira

Este estudo inscreve-se no quadro de pesquisa da análise das perceções dos atletas de competição sub 13 da escola Dragon Force acerca do impacto das actividades desportivas sobre o rendimento escolar, relações entre pares e interpessoais, autoestima e autoconceito. Participaram neste estudo 14 atletas do género masculino com idades entre 11 e 13 anos. As metodologias utilizadas foram a quantitativa e a qualitativa. Os instrumentos utilizados foram: notas académicas, Registo de Empenho e Desenvolvimento Educativo (R.E.D.E.), Escala de Autoestima Global de Rosenberg (Rosenberg Self-Esteem Scale, RSES), Questionário de Motivação para as Atividades Desportivas (QMAD), e Escala de Autopercepção de Susan Harter para adolescentes (EAPH-A). Também foi utilizado o focus group. Parte dos dados foi inserida na base de dados do SPSS, versão 19.0, procedendo-se, igualmente, à análise de conteúdo do material resultante do focus group. Embora os resultados revelem que existem algumas diferenças de perceção, a maior parte dos atletas considera que a prática desportiva está associada à alegria e ao divertimento. Também entendem que esta prática influencia o rendimento escolar, a autoestima, o autoconceito, as relações entre pares e interpessoais.

Efeito da perda de carga e calor no poço injetor no processo de drenagem gravitacional assistido com vapor e solvente

Nowadays, most of the hydrocarbon reserves in the world are in the form of heavy oil, ultra - heavy or bitumen. For the extraction and production of this resource is required to implement new technologies. One of the promising processes for the recovery of this oil is the Expanding Solvent Steam Assisted Gravity Drainage (ES-SAGD) which uses two parallel horizontal wells, where the injection well is situated vertically above the production well. The completion of the process occurs upon injection of a hydrocarbon additive at low concentration in conjunction with steam. The steam adds heat to reduce the viscosity of the oil and solvent aids in reducing the interfacial tension between oil/ solvent. The main force acting in this process is the gravitational and the heat transfer takes place by conduction, convection and latent heat of steam. In this study was used the discretized wellbore model, where the well is discretized in the same way that the reservoir and each section of the well treated as a block of grid, with interblock connection with the reservoir. This study aims to analyze the influence of the pressure drop and heat along the injection well in the ES-SAGD process. The model used for the study is a homogeneous reservoir, semi synthetic with characteristics of the Brazilian Northeast and numerical simulations were performed using the STARS thermal simulator from CMG (Computer Modelling Group). The operational parameters analyzed were: percentage of solvent injected, the flow of steam injection, vertical distance between the wells and steam quality. All of them were significant in oil recovery factor positively influencing this. The results showed that, for all cases analyzed, the model considers the pressure drop has cumulative production of oil below its respective model that disregards such loss. This difference is more pronounced the lower the value of the flow of steam injection

Spatial Assessment of Indices for Characterizing the Erosive Force of Rainfall in El Salvador Republic

Soil erosion data in El Salvador Republic are scarce and there is no rainfall erosivity map for this region. Considering that rainfall erosivity is an important guide for planning soil erosion control practices, a spatial assessment of indices for characterizing the erosive force of rainfall in El Salvador Republic was carried out. Using pluviometric records from 25 weather stations, we applied two methods: erosivity index equation and the Fournier index. In all study area, the rainiest period is from May to November. Annual values of erosivity index ranged from 7,196 to 17,856 MJ mm ha(-1) h(-1) year(-1) and the Fournier index ranged from 52.9 to 110.0 mm. The erosivity map showed that the study area can be broadly divided into three major erosion risk zones, and the Fournier index map was divided into four zones. Both methods revealed that the erosive force is severe in all study area and presented significant spatial correlation with each other. The erosive force in the country is concentrated mainly from May to November.