Dielectric relaxation in biological materials

The study of dielectric properties concerns storage and dissipation of electric and magnetic energy in materials. Dielectrics are important in order to explain various phenomena in Solid-State Physics and in Physics of Biological Materials. Indeed, during the last two centuries, many scientists have tried to explain and model the dielectric relaxation. Starting from the Kohlrausch model and passing through the ideal Debye one, they arrived at more com- plex models that try to explain the experimentally observed distributions of relaxation times, including the classical (Cole-Cole, Davidson-Cole and Havriliak-Negami) and the more recent ones (Hilfer, Jonscher, Weron, etc.). The purpose of this thesis is to discuss a variety of models carrying out the analysis both in the frequency and in the time domain. Particular attention is devoted to the three classical models, that are studied using a transcendental function known as Mittag-Leffler function. We highlight that one of the most important properties of this function, its complete monotonicity, is an essential property for the physical acceptability and realizability of the models. Lo studio delle proprietà dielettriche riguarda l’immagazzinamento e la dissipazione di energia elettrica e magnetica nei materiali. I dielettrici sono importanti al fine di spiegare vari fenomeni nell’ambito della Fisica dello Stato Solido e della Fisica dei Materiali Biologici. Infatti, durante i due secoli passati, molti scienziati hanno tentato di spiegare e modellizzare il rilassamento dielettrico. A partire dal modello di Kohlrausch e passando attraverso quello ideale di Debye, sono giunti a modelli più complessi che tentano di spiegare la distribuzione osservata sperimentalmente di tempi di rilassamento, tra i quali modelli abbiamo quelli classici (Cole-Cole, Davidson-Cole e Havriliak-Negami) e quelli più recenti (Hilfer, Jonscher, Weron, etc.). L’obiettivo di questa tesi è discutere vari modelli, conducendo l’analisi sia nel dominio delle frequenze sia in quello dei tempi. Particolare attenzione è rivolta ai tre modelli classici, i quali sono studiati utilizzando una funzione trascendente nota come funzione di Mittag-Leffler. Evidenziamo come una delle più importanti proprietà di questa funzione, la sua completa monotonia, è una proprietà essenziale per l’accettabilità fisica e la realizzabilità dei modelli.

Modeling multiple state electrostatically formed nanowire transistors

The present thesis work proposes a new physical equivalent circuit model for a recently proposed semiconductor transistor, a 2-drain MSET (Multiple State Electrostatically Formed Nanowire Transistor). It presents a new software-based experimental setup that has been developed for carrying out numerical simulations on the device and on equivalent circuits. As of 2015, we have already approached the scaling limits of the ubiquitous CMOS technology that has been in the forefront of mainstream technological advancement, so many researchers are exploring different ideas in the realm of electrical devices for logical applications, among them MSET transistors. The idea that underlies MSETs is that a single multiple-terminal device could replace many traditional transistors. In particular a 2-drain MSET is akin to a silicon multiplexer, consisting in a Junction FET with independent gates, but with a split drain, so that a voltage-controlled conductive path can connect either of the drains to the source. The first chapter of this work presents the theory of classical JFETs and its common equivalent circuit models. The physical model and its derivation are presented, the current state of equivalent circuits for the JFET is discussed. A physical model of a JFET with two independent gates has been developed, deriving it from previous results, and is presented at the end of the chapter. A review of the characteristics of MSET device is shown in chapter 2. In this chapter, the proposed physical model and its formulation are presented. A listing for the SPICE model was attached as an appendix at the end of this document. Chapter 3 concerns the results of the numerical simulations on the device. At first the research for a suitable geometry is discussed and then comparisons between results from finite-elements simulations and equivalent circuit runs are made. Where points of challenging divergence were found between the two numerical results, the relevant physical processes are discussed. In the fourth chapter the experimental setup is discussed. The GUI-based environments that allow to explore the four-dimensional solution space and to analyze the physical variables inside the device are described. It is shown how this software project has been structured to overcome technical challenges in structuring multiple simulations in sequence, and to provide for a flexible platform for future research in the field.

Fluctuation properties in random walks on networks and simple integrate and fire models

In questa tesi si è studiato l’insorgere di eventi critici in un semplice modello neurale del tipo Integrate and Fire, basato su processi dinamici stocastici markoviani definiti su una rete. Il segnale neurale elettrico è stato modellato da un flusso di particelle. Si è concentrata l’attenzione sulla fase transiente del sistema, cercando di identificare fenomeni simili alla sincronizzazione neurale, la quale può essere considerata un evento critico. Sono state studiate reti particolarmente semplici, trovando che il modello proposto ha la capacità di produrre effetti "a cascata" nell’attività neurale, dovuti a Self Organized Criticality (auto organizzazione del sistema in stati instabili); questi effetti non vengono invece osservati in Random Walks sulle stesse reti. Si è visto che un piccolo stimolo random è capace di generare nell’attività della rete delle fluttuazioni notevoli, in particolar modo se il sistema si trova in una fase al limite dell’equilibrio. I picchi di attività così rilevati sono stati interpretati come valanghe di segnale neurale, fenomeno riconducibile alla sincronizzazione.

Action-based dynamical models of the Fornax dwarf spheroidal galaxy

Il lavoro presentato in questa Tesi si basa sul calcolo di modelli dinamici per Galassie Sferoidali Nane studiando il problema mediante l'utilizzo di funzioni di distribuzione. Si è trattato un tipo di funzioni di distribuzione, "Action-Based distribution functions", le quali sono funzioni delle sole variabili azione. Fornax è stata descritta con un'appropriata funzione di distribuzione e il problema della costruzione di modelli dinamici è stato affrontato assumendo sia un alone di materia oscura con distribuzione di densità costante nelle regioni interne sia un alone con cuspide. Per semplicità è stata assunta simmetria sferica e non è stato calcolato esplicitamente il potenziale gravitazionale della componente stellare (le stelle sono traccianti in un potenziale gravitazionale fissato). Tramite un diretto confronto con alcune osservabili, quali il profilo di densità stellare proiettata e il profilo di dispersione di velocità lungo la linea di vista, sono stati trovati alcuni modelli rappresentativi della dinamica di Fornax. Modelli calcolati tramite funzioni di distribuzione basati su azioni permettono di determinare in maniera autoconsistente profili di anisotropia. Tutti i modelli calcolati sono caratterizzati dal possedere un profilo di anisotropia con forte anisotropia tangenziale. Sono state poi comparate le stime di materia oscura di questi modelli con i più comuni e usati stimatori di massa in letteratura. E stato inoltre stimato il rapporto tra la massa totale del sistema (componente stellare e materia oscura) e la componente stellare di Fornax, entro 1600 pc ed entro i 3 kpc. Come esplorazione preliminare, in questo lavoro abbiamo anche presentato anche alcuni esempi di modelli sferici a due componenti in cui il campo gravitazionale è determinato dall'autogravità delle stelle e da un potenziale esterno che rappresenta l'alone di materia oscura.

Postpartal recurrent non-ST elevation myocardial infarction in essential thrombocythaemia: case report and review of the literature

ABSTRACT: Normal pregnancy corresponds to a procoagulant state. Acute myocardial infarction during pregnancy is rare, yet considering the low non-pregnant risk score of childbearing women it is still surprisingly frequent. We report a case of postpartum recurrent non-ST elevation myocardial infarction in a 40-year-old caucasian woman with essential thrombocythaemia in the presence of a positive JAK-2 mutation and an elevated anti-cardiolipin IgM antibody titer. In the majority of cases of myocardial infarction in pregnancy or in the peripartal period, atherosclerosis, a thrombus or coronary artery dissection is observed. The combination of essential thrombocythaemia and elevated anti-cardiolipin IgM antibody titer in the presence of several cardiovascular risk factors seems to be causative in our case. In conclusion, with the continuing trend of childbearing at older ages, rare or unlikely conditions leading to severe events such as myocardial infarction must be considered in pregnant women.

Regulation of GPCR signaling in hypertension

Hypertension represents a complex, multifactorial disease and contributes to the major causes of morbidity and mortality in industrialized countries: ischemic and hypertensive heart disease, stroke, peripheral atherosclerosis and renal failure. Current pharmacological therapy of essential hypertension focuses on the regulation of vascular resistance by inhibition of hormones such as catecholamines and angiotensin II, blocking them from receptor activation. Interaction of G-protein coupled receptor kinases (GRKs) and regulator of G-protein signaling (RGS) proteins with activated G-protein coupled receptors (GPCRs) effect the phosphorylation state of the receptor leading to desensitization and can profoundly impair signaling. Defects in GPCR regulation via these modulators have severe consequences affecting GPCR-stimulated biological responses in pathological situations such as hypertension, since they fine-tune and balance the major transmitters of vessel constriction versus dilatation, thus representing valuable new targets for anti-hypertensive therapeutic strategies. Elevated levels of GRKs are associated with human hypertensive disease and are relevant modulators of blood pressure in animal models of hypertension. This implies therapeutic perspective in a disease that has a prevalence of 65million in the United States while being directly correlated with occurrence of major adverse cardiac and vascular events. Therefore, therapeutic approaches using the inhibition of GRKs to regulate GPCRs are intriguing novel targets for treatment of hypertension and heart failure.

Theoretical Calculations of Acid Dissociation Constants: A Review Article

Acid dissociation constants, or pKa values, are essential for understanding many fundamental reactions in chemistry. These values reveal the deprotonation state of a molecule in a particular solvent. There is great interest in using theoretical methods to calculate the pKa values for many different types of molecules. These include molecules that have not been synthesized, those for which experimental pKa determinations are difficult, and for larger molecules where the local environment changes the usual pKa values, such as for certain amino acids that are part of a larger polypeptide chain. Chemical accuracy in pKa calculations is difficult to achieve, because an error of 1.36 kcal/mol in the change of free energy for deprotonation in solvent results in an error of 1 pKa unit. In this review the most valuable methods for determining accurate pKa values in aqueous solution are presented for educators interested in explaining or using these methods for their students.

Development of Dynamic Constraint Models for a Model Based Transient Calibration Process

Model based calibration has gained popularity in recent years as a method to optimize increasingly complex engine systems. However virtually all model based techniques are applied to steady state calibration. Transient calibration is by and large an emerging technology. An important piece of any transient calibration process is the ability to constrain the optimizer to treat the problem as a dynamic one and not as a quasi-static process. The optimized air-handling parameters corresponding to any instant of time must be achievable in a transient sense; this in turn depends on the trajectory of the same parameters over previous time instances. In this work dynamic constraint models have been proposed to translate commanded to actually achieved air-handling parameters. These models enable the optimization to be realistic in a transient sense. The air handling system has been treated as a linear second order system with PD control. Parameters for this second order system have been extracted from real transient data. The model has been shown to be the best choice relative to a list of appropriate candidates such as neural networks and first order models. The selected second order model was used in conjunction with transient emission models to predict emissions over the FTP cycle. It has been shown that emission predictions based on air-handing parameters predicted by the dynamic constraint model do not differ significantly from corresponding emissions based on measured air-handling parameters.

Development of a model-based transient calibration process for diesel engine electronic control module tables – Part 1: data requirements, processing, and analysis

This is the first part of a study investigating a model-based transient calibration process for diesel engines. The motivation is to populate hundreds of parameters (which can be calibrated) in a methodical and optimum manner by using model-based optimization in conjunction with the manual process so that, relative to the manual process used by itself, a significant improvement in transient emissions and fuel consumption and a sizable reduction in calibration time and test cell requirements is achieved. Empirical transient modelling and optimization has been addressed in the second part of this work, while the required data for model training and generalization are the focus of the current work. Transient and steady-state data from a turbocharged multicylinder diesel engine have been examined from a model training perspective. A single-cylinder engine with external air-handling has been used to expand the steady-state data to encompass transient parameter space. Based on comparative model performance and differences in the non-parametric space, primarily driven by a high engine difference between exhaust and intake manifold pressures (ΔP) during transients, it has been recommended that transient emission models should be trained with transient training data. It has been shown that electronic control module (ECM) estimates of transient charge flow and the exhaust gas recirculation (EGR) fraction cannot be accurate at the high engine ΔP frequently encountered during transient operation, and that such estimates do not account for cylinder-to-cylinder variation. The effects of high engine ΔP must therefore be incorporated empirically by using transient data generated from a spectrum of transient calibrations. Specific recommendations on how to choose such calibrations, how many data to acquire, and how to specify transient segments for data acquisition have been made. Methods to process transient data to account for transport delays and sensor lags have been developed. The processed data have then been visualized using statistical means to understand transient emission formation. Two modes of transient opacity formation have been observed and described. The first mode is driven by high engine ΔP and low fresh air flowrates, while the second mode is driven by high engine ΔP and high EGR flowrates. The EGR fraction is inaccurately estimated at both modes, while EGR distribution has been shown to be present but unaccounted for by the ECM. The two modes and associated phenomena are essential to understanding why transient emission models are calibration dependent and furthermore how to choose training data that will result in good model generalization.

Experimentation with different thermodynamic cycles used for pKa calculations on carboxylic acids using Complete Basis Set and Gaussian-n Models combined with CPCM Continuum Solvation Methods

Complete basis set and Gaussian-n methods were combined with Barone and Cossi's implementation of the polarizable conductor model (CPCM) continuum solvation methods to calculate pKa values for six carboxylic acids. Four different thermodynamic cycles were considered in this work. An experimental value of −264.61 kcal/mol for the free energy of solvation of H+, ΔGs(H+), was combined with a value for Ggas(H+) of −6.28 kcal/mol, to calculate pKa values with cycle 1. The complete basis set gas-phase methods used to calculate gas-phase free energies are very accurate, with mean unsigned errors of 0.3 kcal/mol and standard deviations of 0.4 kcal/mol. The CPCM solvation calculations used to calculate condensed-phase free energies are slightly less accurate than the gas-phase models, and the best method has a mean unsigned error and standard deviation of 0.4 and 0.5 kcal/mol, respectively. Thermodynamic cycles that include an explicit water in the cycle are not accurate when the free energy of solvation of a water molecule is used, but appear to become accurate when the experimental free energy of vaporization of water is used. This apparent improvement is an artifact of the standard state used in the calculation. Geometry relaxation in solution does not improve the results when using these later cycles. The use of cycle 1 and the complete basis set models combined with the CPCM solvation methods yielded pKa values accurate to less than half a pKa unit. © 2001 John Wiley & Sons, Inc. Int J Quantum Chem, 2001

Fastener-Based Computational Models of Cold-Formed Steel Shear Walls

Cold-formed steel (CFS) combined with wood sheathing, such as oriented strand board (OSB), forms shear walls that can provide lateral resistance to seismic forces. The ability to accurately predict building deformations in damaged states under seismic excitations is a must for modern performance-based seismic design. However, few static or dynamic tests have been conducted on the non-linear behavior of CFS shear walls. Thus, the purpose of this research work is to provide and demonstrate a fastener-based computational model of CFS wall models that incorporates essential nonlinearities that may eventually lead to improvement of the current seismic design requirements. The approach is based on the understanding that complex interaction of the fasteners with the sheathing is an important factor in the non-linear behavior of the shear wall. The computational model consists of beam-column elements for the CFS framing and a rigid diaphragm for the sheathing. The framing and sheathing are connected with non-linear zero-length fastener elements to capture the OSB sheathing damage surrounding the fastener area. Employing computational programs such as OpenSees and MATLAB, 4 ft. x 9 ft., 8 ft. x 9 ft. and 12 ft. x 9 ft. shear wall models are created, and monotonic lateral forces are applied to the computer models. The output data are then compared and analyzed with the available results of physical testing. The results indicate that the OpenSees model can accurately capture the initial stiffness, strength and non-linear behavior of the shear walls.

Advantages and Applications of Transforming Empirical Model Input Space with Dimensional Models

Model-based calibration of steady-state engine operation is commonly performed with highly parameterized empirical models that are accurate but not very robust, particularly when predicting highly nonlinear responses such as diesel smoke emissions. To address this problem, and to boost the accuracy of more robust non-parametric methods to the same level, GT-Power was used to transform the empirical model input space into multiple input spaces that simplified the input-output relationship and improved the accuracy and robustness of smoke predictions made by three commonly used empirical modeling methods: Multivariate Regression, Neural Networks and the k-Nearest Neighbor method. The availability of multiple input spaces allowed the development of two committee techniques: a 'Simple Committee' technique that used averaged predictions from a set of 10 pre-selected input spaces chosen by the training data and the "Minimum Variance Committee" technique where the input spaces for each prediction were chosen on the basis of disagreement between the three modeling methods. This latter technique equalized the performance of the three modeling methods. The successively increasing improvements resulting from the use of a single best transformed input space (Best Combination Technique), Simple Committee Technique and Minimum Variance Committee Technique were verified with hypothesis testing. The transformed input spaces were also shown to improve outlier detection and to improve k-Nearest Neighbor performance when predicting dynamic emissions with steady-state training data. An unexpected finding was that the benefits of input space transformation were unaffected by changes in the hardware or the calibration of the underlying GT-Power model.

Use of a State-Level Pharmaceutical Assistance Program Among Urban and Rural Elders

A number of state-level pharmaceutical assistance programs have been established as a result of the growing recognition of the role of pharmaceuticals in the long-term care of the elderly. However, existing research does not provide a coherent expectation for patterns of use by rural and urban elderly. The data for this analysis are drawn from a larger study of the Pennsylvania Pharmaceutical Assistance Contract for the Elderly (PACE). PACE provides prescription medicines for elderly who meet income requirements. The research project was designed to assess the characteristics of PACE program participants and non-participants on a wide range of issues. Chi-square analysis and regression models were used to assess the association between rural and urban residence and access to the PACE Program. The results indicate that rural/urban status of the elderly is not a significant predictor of the use of PACE. Other traditional variables (e.g., health self-rating and physician visits) did predict difference in the pattern of use.

The Effects of Privatization of State-Owned Enterprises in Poland and East Germany

The main goal of this project was to propose appropriate methods of analysing the effects of the privatisation of state-owned enterprises, methods which were then tested on a limited sample of 16 Polish and 8 German enterprises privatised in 1992. A considerable amount of information was collected relating to the six-year period 1989-1994 relating to most aspects of the companies' activities. The effects of privatisation were taken to be those changes within the enterprises which were the result of privatisation, in such areas as production, the productivity of labour and fixed assets, investments and innovations, employment and wages, economic incentives (especially for top managers), financing (internal and external sources), bad debts and economic effects (financial analysis). A second important goal was to identify the main factors which represent methodological obstacles in surveys of the effects of privatisation during a period of fundamental transformation of the entire economic system. The list of enterprises for the research was compiled in such a way as to allow for the differentiation of ownership structures of privatised firms and to permit (at least to a certain extent) the empirical verification of some hypotheses regarding the privatisation process. The enterprises selected were divided into the following three groups representing (as far as possible) various types of ownership structures or types of control: (1) enterprises control by strategic investors (domestic or foreign), (2) enterprises controlled by employees (employee-owned companies), (3) enterprises controlled by managers. Formal methods such as econometric models with varying parameters were used to separate pure privatisation effects from other factors which influence various aspects of an enterprise's working, including policies on the productivity of labour and capital, average wages, the remuneration of top managers, etc. While the group admits that their findings and conclusions cannot be treated as representative of all privatised enterprises in Poland and Germany, they found considerable convergence with their findings and those of other surveys conducted on a wider scale. The main hypotheses that were confirmed included that privatisation (especially in companies controlled by large investors and managers) leads to a significant increase in the effectiveness of these production process, growing pay differentials between different employee groups (e.g. between executives and rank-and-file employees) and between different jobs and positions within particular professional groups. They also confirmed the growing importance in incentives to top executives of incentives linked with the company's economic effects (particularly profit-related incentives), long-term incentives and the capital market.

Towards a Variety of Family Models: Economic Contributions of Spouses and Family Power

In Western societies the increase in female employment (especially among married women) is seen as having brought about the crisis of the traditional model of the family, reinforcing the position of the "modern" model - the egalitarian family with two working spouses and a "dual-career" family. In contrast, the transitional situation in the post-communist countries during the 1990s is producing a crisis of the family with two working spouses (the basic type of the communist period) and leading to new power relations within the family. While the growth of dual-earner households in this century has implied modification of family models towards greater symmetry of responsibility for breadwinning and homemaking, there is considerable evidence that women's increased employment does not necessarily lead to a more egalitarian approach to gender roles within the family. The group set out to investigate the economic situation of families and economic power within the fame as a crucial factor in the transformation of families with two working spouses in order to reveal the specific patterns of gender contracts and power relations within the family that are emerging in response to the current political and economic transformation. They opted for a comparative approach, selecting the Czech Republic as a country where the very similar tendencies of a few years ago (almost 100% of women employed and the family as a realm of considerable private freedom where both women's and men's gender identities and the traditional distribution of family responsibilities were largely preserved) are combined with a very different experience in terms of economic inequalities during the 1990s to that of Russia. In the first stage of the study they surveyed 300 married couples (150 in each country) on the question of breadwinning. They then carried out in-depth interviews with 10 couples from each country (selected from among the educated layers of the population), focusing on the process of the social construction of gender, using breadwinning and homemaking as gender boundaries which distinguish men from women. By analysing changes in social position and the type of interpersonal interaction of spouses they distinguished two main types of family contracts: the neo-traditional "communal sharing" (with male breadwinner, traditional distribution of family chores and negotiated family power) and the modern one based on negotiated agreement. The most important pre-conditions of husband-wife agreement about breadwinning seemed to imply their overall gender ideology rather than the economic and/or family circumstances. In general, wives were more likely to express egalitarian views, supporting the blurring or even elimination of many gender boundaries. Husbands, on the other hand, more often gave responses calling for the continued maintenance of gender boundaries. The analysis showed that breadwinning is still an important gender boundary in these cultures, one that is assumed unless it is explicitly questioned and that is seen as part of what makes a man a "real man". The majority of respondents seemed to be committed to egalitarian ideology on gender roles and the distribution of family tasks, including decision making, but this is contradicted by the persistent idea of the husband as the breadwinner. This contradiction is more characteristic of the Russian situation than of the Czech. The quantitative study showed a difference in prevailing family models between the two countries, with a clearer shift towards the traditional family contract in the Russian case. The Czechs were more likely to consider their partnerships as based on negotiated agreement, while the Russians saw theirs as based on egalitarian contract, in both cases seeing this as the norm. The majority of couples said they felt satisfied with their marriage, although in both countries wives seemed to be less satisfied. There was however a difference in the issues that aroused dissatisfaction, with Czech women being more sensitive to issues such as self-realisation, personal independence, understanding and recognition in the family, and Russians to issues of love, understanding and recognition. The most disputed area for the majority of families was chores in the home, presumably because in many families both husband and wife were working hard outside the home and because a number of partners had differing views as to the ideal distribution of chores within the family. The distribution of power in the family seems to be linked to the level of well being. The analysis showed that in the dominant democratic model there is still an inverse connection between family leadership and well being: the more prominent the wife's position as head of the family is, the lower the level of family income. This may reflect both the husband's refusal to play the leading role in the family and even his rejection of any involvement in family issues in such a family. The qualitative research revealed that both men and women see the breadwinning role to be an essential part of masculine identity, a role which the female partner would take on temporarily to assist the male but not permanently since this would threaten the gender boundaries and the man's identity. At the same time, few breadwinners expressed a sense of job satisfaction and all considered their choice as imposed on them by the circumstances (i.e. having a family in difficult times). The group feel that family orientation and some loss of personal involvement in their profession is partly reflected in the fact that many of the men felt more comfortable and self-confident at home than at work. Women's work, on the other hand, was largely seen as a source of personal and self-realisation and social life. Eight out of ten of the Russian women interviewed were employed, although only two on a full-time basis, but none saw their jobs as adding substantially to the family budget. Both partners see the most important factor as the wife's wish to work or stay at home, and do not think it wise for the wife to work at the expense of her part of the "family contract", although husbands from the "egalitarian" relationships expressed more willingness to compromise. The analysis showed clearly that wives and husbands did not construct gender boundaries in isolation, with the interviews providing clear evidence of negotiation. At the same time, husbands' interpretations of their wives' employment were less susceptible to the influence of negotiation than were their gender attitudes and norms about breadwinning. One of the most interesting aspects of the spouses' negotiations was the extent to which they disagreed about what they seemed to have agreed upon. Most disagreements about the breadwinning boundaries, however, were over norms and were settled by changes in norms rather than in behavioural interpretation. Changes in norms were often a form of peace offering or were in response in changes in circumstances. The study did show, however, that many of the efforts at cooperation and compensation were more symbolic than real and the group found the plasticity of expressed gender ideology to be one of the most striking findings of their work. They conclude that the shift towards more traditional gednder distributions of incomes and domestic chores does not automatically mean the reestablishment of a patriarchal model of family power. On the contrary, it seems to be a compromise formation, relatively unstable, temporary and containing self-defeating forces as the split between the personal and professional value of work and its social value expressed in a money equivalent cannot be maintained for generations.