Efectos de una intervención educativa en la promoción de la actividad física, otros comportamientos saludables y los conocimientos para la prevención del cáncer de pulmón en jóvenes del colegio La Merced en Bogotá D.C., Colombia

Introducción: El cáncer de pulmón es el tipo de cáncer más mortal a nivel mundial, al cual se atribuyen una de cada cinco muertes anualmente. El objetivo de este estudio fue determinar los efectos de una intervención educativa en la promoción de la actividad física, otros comportamientos saludables y los conocimientos para la prevención del cáncer de pulmón en jóvenes estudiantes de una institución educativa pública en Bogotá, Colombia. Métodos: Estudio experimental no controlado en 243 estudiantes de sexo femenino (Edad 14±1,5 años). La intervención educativa se desarrolló en tres momentos: una sesión educativa con una duración de 60 minutos acorde a la Guía para la Comunicación Educativa en el Marco del Control del Cáncer, en Colombia. Segundo, se enviaron tres correos electrónicos con información acerca del cáncer pulmonar; finalmente se desarrollaron actividades grupales. Para la toma de datos se utilizaron el cuestionario Cáncer Awareness Measure (CAM) y el Sistema de Vigilancia de Factores de Riesgo del Comportamiento (BRFSS). La evaluación se realizó en un período de seguimiento a 1, 3 y 6 meses post-intervención. Resultados: La intervención educativa incrementó significativamente los conocimientos de las jóvenes sobre los signos de alarma del cáncer pulmonar y los principales factores de riesgo modificables, tales como el consumo de cigarrillo, la exposición al humo del mismo y el sedentarismo, al sexto mes post-intervención. Las mejoras en el cambio comportamental no lograron significancia estadística. Conclusiones: Una intervención educativa mejora los conocimientos acerca de la detección temprana y la prevención del cáncer de pulmón, así como los comportamientos saludables en jóvenes estudiantes en Bogotá, Colombia. Se requiere de estudios controlados aleatorizados.

La construcción de sentido (‘sensemaking’) de un entorno estratégico turbulento por parte de los altos directivos: un estudio en una multinacional automotriz

Este artículo presenta los resultados de una investigación realizada al interior de dos contextos. Por un lado, el teórico, en el marco de uno de los discursos más relevantes en los campos de la estrategia organizacional, de la managerial and organizational cognition (MOC) y, en general, de los estudios organizacionales (organization studies): la construcción de sentido (sensemaking). Por el otro, el empírico, en una de las grandes compañías multinacionales del sector automotriz con presencia global. Esta corporación enfrenta una permanente tensión entre lo que dicta la casa matriz, en relación con el cumplimiento de metas y estándares específicos, considerando el mundo entero, y los retos que, teniendo en cuenta lo regional y lo local, experimentan los altos directivos encargados de hacer prosperar la empresa en estos lugares. La aproximación implementada fue cualitativa. Esto en atención a la naturaleza de la problemática abordada y la tradición del campo. Los resultados permiten ampliar el actual nivel de comprensión acerca de los procesos de sensemaking de los altos directivos al enfrentar un entorno estratégico turbulento.

Favourable areas for expansion and reintroduction of Iberian lynx accounting for distribution trends and genetic diversity of the European rabbit

Although on a local scale Iberian lynx distribution is determined by the availability of prey rabbits, recent modelling analyses have uncovered broad-scale disagreements between these two species’ distribution trends. These analyses showed also that the lynx had become restricted to only a fraction of the rabbit’s genetic diversity, and that this could be jeopardising its survival in the face of environmental hazards and uncertainty. In the present paper, a follow-up was carried out through the building of lynx and rabbit distribution models based on the most recent Spanish mammal atlas. Environmental favourability values for lynx and rabbit were positively correlated within the lynx’s current distribution area, but they were negatively correlated within the total Spanish area where lynx used to occur in the 1980’s. Environmental favourability for rabbits was significantly higher where lynx maintains reproductive populations than where it recently disappeared, indicating that rabbit favourability plays an important role and can be a good predictor of lynx persistence. The lynx and rabbit models were extrapolated to predict favourable areas for both species in Spain as well as in Portugal, on the original scale of the distribution data (10x10 km) and on a 100 times finer spatial resolution (1x1 km). The lynx and rabbit models were also combined through fuzzy logic to forecast the potential for lynx occurrence incorporating information on favourable areas for its main prey. Several areas are proposed as favourable for lynx expansion or re-introduction,

Methods of earth building in the Huila Province, Angola

In Angola, the construction made of raw earth is a cultural heritage widely used by low income households, representing over 80% of the population [1, 3]. In Huila province is evident construction in raw earth in a large scale, either in urban or in periurban and rural areas. The construction methods follow the ancestral standards, distributed throughout the region of Huila, being built by the several ethnic groups. Among the construction techniques in earth, stand out: the adobe, wattle-and-daub and more recently on CEB (Compressed Earth Block). The type of soil used to make the adobes is mainly silty-clayed sand [1]. The most applied materials are: rods, reeds, wood, grass, straw, soil and stone, almost with the same characteristics [2]. The manufacture of adobe, consists essentially in mixing clay and grass (plant fibers), then put the mixture inside a wooden mold, having a size of 42 cm long and 18 cm high and taking three to four days to dry and be applied in housing construction. The application of these materials makes the construction less expensive because they are collected, transformed and applied by the owner himself of housing without any project, based only on the result of the practice and experience acquired from their ancestors. They are simple constructions, presenting a typology of grouped and isolated single-family housing, ranging between 2 and 3 bedrooms [2]. The construction techniques used in such small housings have positive environmental aspects, both as regards the materials employed, such as the manner in which the constructions are raised, showing special concerns for the quality improvement of them, as regards the resistance, durability and comfort [4].

Feasibility in Using Technological Resources for Implementing the Environmental Culture Cross-Cutting Factor for Sustainable Development in the Costa Rican Basic General Education

The purpose of this research was to analyze whether the use of technological resources may be feasible in the implementation of the environmental culture cross-cutting factor for sustainable development, which focuses on environmental issues related to the contents of the Science study program for the seventh year of the basic general education. The research design is qualitative with a dominant approach and uses some quantitative elements specifically in the design of instruments and some data analysis techniques. The type of study was developed with a multi-method approach; a trend that has been shaping a research style which integrates various methods in a single design. For this, we identified the didactic strategies and their relationship to both, technology and the environmental axis for sustainable development, used by six Science teachers of the 7th grade, in public institutions of the province of Heredia, Central Valley, Costa Rica, as well as the opinion of 20 students from that same grade. The main results include the opinions of the students, who showed a considerable interest in classes where technological resources are used. However, teachers do not show great interest or positive opinions on this matter; in addition, they are not well trained on the use of technological resources. It was also identified that the teaching personal who participated in the study do not develop this curricular axis.

Equivalence tests to support environmental biosafety decisions:theory and examples.

2016

Methods for objective and interpretative evaluation of function and motor control: gait in perturbed condition and in the aquatic therapy

Gait analysis allows to characterize motor function, highlighting deviations from normal motor behavior related to an underlying pathology. The widespread use of wearable inertial sensors has opened the way to the evaluation of ecological gait, and a variety of methodological approaches and algorithms have been proposed for the characterization of gait from inertial measures (e.g. for temporal parameters, motor stability and variability, specific pathological alterations). However, no comparative analysis of their performance (i.e. accuracy, repeatability) was available yet, in particular, analysing how this performance is affected by extrinsic (i.e. sensor location, computational approach, analysed variable, testing environmental constraints) and intrinsic (i.e. functional alterations resulting from pathology) factors. The aim of the present project was to comparatively analyze the influence of intrinsic and extrinsic factors on the performance of the numerous algorithms proposed in the literature for the quantification of specific characteristics (i.e. timing, variability/stability) and alterations (i.e. freezing) of gait. Considering extrinsic factors, the influence of sensor location, analyzed variable, and computational approach on the performance of a selection of gait segmentation algorithms from a literature review was analysed in different environmental conditions (e.g. solid ground, sand, in water). Moreover, the influence of altered environmental conditions (i.e. in water) was analyzed as referred to the minimum number of stride necessary to obtain reliable estimates of gait variability and stability metrics, integrating what already available in the literature for over ground gait in healthy subjects. Considering intrinsic factors, the influence of specific pathological conditions (i.e. Parkinson’s Disease) was analyzed as affecting the performance of segmentation algorithms, with and without freezing. Finally, the analysis of the performance of algorithms for the detection of gait freezing showed how results depend on the domain of implementation and IMU position.

Advanced decision-support methods for the design, control, and optimization of perishable products life cycle

In the last decades, global food supply chains had to deal with the increasing awareness of the stakeholders and consumers about safety, quality, and sustainability. In order to address these new challenges for food supply chain systems, an integrated approach to design, control, and optimize product life cycle is required. Therefore, it is essential to introduce new models, methods, and decision-support platforms tailored to perishable products. This thesis aims to provide novel practice-ready decision-support models and methods to optimize the logistics of food items with an integrated and interdisciplinary approach. It proposes a comprehensive review of the main peculiarities of perishable products and the environmental stresses accelerating their quality decay. Then, it focuses on top-down strategies to optimize the supply chain system from the strategical to the operational decision level. Based on the criticality of the environmental conditions, the dissertation evaluates the main long-term logistics investment strategies to preserve products quality. Several models and methods are proposed to optimize the logistics decisions to enhance the sustainability of the supply chain system while guaranteeing adequate food preservation. The models and methods proposed in this dissertation promote a climate-driven approach integrating climate conditions and their consequences on the quality decay of products in innovative models supporting the logistics decisions. Given the uncertain nature of the environmental stresses affecting the product life cycle, an original stochastic model and solving method are proposed to support practitioners in controlling and optimizing the supply chain systems when facing uncertain scenarios. The application of the proposed decision-support methods to real case studies proved their effectiveness in increasing the sustainability of the perishable product life cycle. The dissertation also presents an industry application of a global food supply chain system, further demonstrating how the proposed models and tools can be integrated to provide significant savings and sustainability improvements.

Economic and Environmental Optimization of Ornamental Stone Block Cutting with a 3D Algorithm

This thesis focuses on finding the optimum block cutting dimensions in terms of the environmental and economic factors by using a 3D algorithm for a limestone quarry in Foggia, Italy. The environmental concerns of quarrying operations are mainly: energy consumption, material waste, and pollution. The main economic concerns are the block recovery, the selling prices, and the production costs. Fractures adversely affect the block recovery ratio. With a fracture model, block production can be optimized. In this research, the waste volume produced by quarrying was minimised to increase the recovery ratio and ensure economic benefits. SlabCutOpt is a software developed at DICAM–University of Bologna for block cutting optimization which tests different cutting angles on the x-y-z planes to offer up alternative cutting methods. The program tests several block sizes and outputs the optimal result for each entry. By using SlabCutOpt, ten different block dimensions were analysed, the results indicated the maximum number of non-intersecting blocks for each dimension. After analysing the outputs, the block named number 1 with the dimensions ‘1mx1mx1m’ had the highest recovery ratio as 43% and the total Relative Money Value (RMV) with a value of 22829. Dimension number 1, also had the lowest waste volume, with a value of 3953.25 m3, for the total bench. For cutting the total bench volume of 6932.25m3, the diamond wire cutter had the lowest dust emission values for the block with the dimension ‘2mx2mx2m’, with a value of 24m3. When compared with the Eco-Label standards, block dimensions having surface area values lower than 15m2, were found to fit the natural resource waste criteria of the label, as the threshold required 25% of minimum recovery [1]. Due to the relativity of production costs, together with the Eco-Label threshold, the research recommends the selection of the blocks with a surface area value between 6m2 and 14m2.

Modelling of ORC components and systems for low-medium temperature heat recovery applications with reduced environmental impact

Although its great potential as low to medium temperature waste heat recovery (WHR) solution, the ORC technology presents open challenges that still prevent its diffusion in the market, which are different depending on the application and the size at stake. Focusing on the micro range power size and low temperature heat sources, the ORC technology is still not mature due to the lack of appropriate machines and working fluids. Considering instead the medium to large size, the technology is already available but the investment is still risky. The intention of this thesis is to address some of the topical themes in the ORC field, paying special attention in the development of reliable models based on realistic data and accounting for the off-design performance of the ORC system and of each of its components. Concerning the “Micro-generation” application, this work: i) explores the modelling methodology, the performance and the optimal parameters of reciprocating piston expanders; ii) investigates the performance of such expander and of the whole micro-ORC system when using Hydrofluorocarbons as working fluid or their new low GWP alternatives and mixtures; iii) analyzes the innovative ORC reversible architecture (conceived for the energy storage), its optimal regulation strategy and its potential when inserted in typical small industrial frameworks. Regarding the “Industrial WHR” sector, this thesis examines the WHR opportunity of ORCs, with a focus on the natural gas compressor stations application. This work provides information about all the possible parameters that can influence the optimal sizing, the performance and thus the feasibility of installing an ORC system. New WHR configurations are explored: i) a first one, relying on the replacement of a compressor prime mover with an ORC; ii) a second one, which consists in the use of a supercritical CO2 cycle as heat recovery system.

Assessing the state of Nephrops norvegicus and management measures in the Central Adriatic Sea

Nephrops norvegicus is a sedentary bottom-dwelling crustacean that represents one of the main commercial species exploited in the Adriatic Sea (Central Mediterranean). An evaluation of the status of this important resource is thus extremely important in order to manage it in a sustainable way. The evaluation of N. norvegicus is complicated by several issues, mainly: (i) the complex biology and behaviour of the species itself, (ii) the presence of subpopulations with different biological traits within the same stock unit. Relevant concentration of N.norvegicus occurs within the Pomo/Jabuka Pits area which is characterised by peculiar oceanographic and geophysical conditions. This area represented for a long time an important fishing ground shared by Italian and Croatian fleets and recently a Fishery Restricted Area (FRA) was established there. The aim of the present study is to perform for the first time an evaluation of the status of the N.norvegicus subpopulation inhabiting the Pomo/Jabuka Pits also accounting for the possible effects on it of the management measures. To achieve this, the principal fisheryindependent and fishery-dependent dataset available for the study area were firstly analysed and then treated. Data collected by the CNR-IRBIM of Ancona through both indirect (“UWTV”) and direct (trawling) methods were refined by means of a revision of the time series and related biases, and a modelling approach accounting for environmental and fishery effects, respectively. Commercial data for both Italy and Croatia were treated in order to obtain landings and length distributions for the Pomo area only; an historical reconstruction of data starting from 1970 was carried out for both countries. The obtained information was used as input for a Bayesian length-based stock assessment model developed through the CASAL software; the flexibility of this model is recommended for N.norvegicus and similar species allowing to deal with sex- and fleet-based integrated assessment method

Development of advanced methods for the simulation of the reacting mixture formation in internal combustion engines with the use of machine learning algorithms

Besides increasing the share of electric and hybrid vehicles, in order to comply with more stringent environmental protection limitations, in the mid-term the auto industry must improve the efficiency of the internal combustion engine and the well to wheel efficiency of the employed fuel. To achieve this target, a deeper knowledge of the phenomena that influence the mixture formation and the chemical reactions involving new synthetic fuel components is mandatory, but complex and time intensive to perform purely by experimentation. Therefore, numerical simulations play an important role in this development process, but their use can be effective only if they can be considered accurate enough to capture these variations. The most relevant models necessary for the simulation of the reacting mixture formation and successive chemical reactions have been investigated in the present work, with a critical approach, in order to provide instruments to define the most suitable approaches also in the industrial context, which is limited by time constraints and budget evaluations. To overcome these limitations, new methodologies have been developed to conjugate detailed and simplified modelling techniques for the phenomena involving chemical reactions and mixture formation in non-traditional conditions (e.g. water injection, biofuels etc.). Thanks to the large use of machine learning and deep learning algorithms, several applications have been revised or implemented, with the target of reducing the computing time of some traditional tasks by orders of magnitude. Finally, a complete workflow leveraging these new models has been defined and used for evaluating the effects of different surrogate formulations of the same experimental fuel on a proof-of-concept GDI engine model.

The environmental DNA in the risk assessment and decision making processes for the invasive species management in agri-food sector, hydraulic security and biodiversity conservation

The use of environmental DNA (eDNA) analysis as a monitoring tool is becoming more and more widespread. The eDNA metabarcoding methods allow rapid community assessments of different target taxa. This work is focused on the validation of the environmental DNA metabarcoding protocol for biodiversity assessment of freshwater habitats. Scolo Dosolo was chosen as study area and three sampling points were defined for traditional and eDNA analyses. The gutter is a 205 m long anthropic canal located in Sala Bolognese (Bologna, Italy). Fish community and freshwater invertebrate metazoans were the target groups for the analysis. After a preliminary study in summer 2019, 2020 was devoted to the sampling campaign with winter (January), spring (May), summer (July) and autumn (October) surveys. Alongside with the water samplings for the eDNA study, also traditional fish surveys using the electrofishing technique were performed to assess fish community composition; census on invertebrates was performed using an entomological net and a surber sampler. After in silico analysis, the MiFish primer set amplifying a fragment of the 12s rRNA gene was selected for bony fishes. For invertebrates the FWHF2 + FWHR2N primer combination, that amplifies a region of the mitochondrial coi gene, was chosen. Raw reads were analyzed through a bioinformatic pipeline based on OBITools metabarcoding programs package and QIIME2. The OBITools pipeline retrieved seven fish taxa and 54 invertebrate taxa belonging to six different phyla, while QIIME2 recovered eight fish taxa and 45 invertebrate taxa belonging to the same six phyla as the OBITools pipeline. The metabarcoding results were then compared with the traditional surveys data and bibliographic records. Overall, the validated protocol provides a reliable picture of the biodiversity of the study area and an efficient support to the traditional methods.

Non conventional species as monitor of environmental pollution

This thesis collects several ecotoxicological studies focused on the quali- quantitative analysis of several classes of chemical compounds. Our studies have been conducted on different aquatic species occupying different food chain trophic levels and characterized by differences in biology, ethology, and nutrition, but all considered excellent bioindicators. This choice allowed us to have a broad overview of the contamination of aquatic environments. Detrimental effects of several chemical compounds on the species investigated have been discussed, considering the economic and public health implications linked to the pollution of the environment and the exposure to old and emerging xenobiotics. Our studies underline the importance of a multidisciplinary and integrated approach that includes the application of the one health concept to ensure the protection of public health and respect for natural environments. Studies collected in this thesis also aim to overcome some critical limitations of the branch of ecotoxicology, such as the lack of standardization in laboratory methods. Our data also underline the importance of expanding research to a greater number of various biological matrices than those indicated by the literature as target tissues for specific pollutants. This condition enables more detailed information on the kinetics of xenobiotics in animal organisms. Our studies also allow us to expand the knowledge related to the mechanisms of synergy and antagonism of mixtures of pollutants that can simultaneously accumulate in wildlife.

Development of a Whole-Genome Sequencing (WGS) approach for the characterization of Legionella environmental isolates in water systems

Legionella is a Gram-negative bacterium that represent a public health issue, with heavy social and economic impact. Therefore, it is mandatory to provide a proper environmental surveillance and risk assessment plan to perform Legionella control in water distribution systems in hospital and community buildings. The thesis joins several methodologies in a unique workflow applied for the identification of non-pneumophila Legionella species (n-pL), starting from standard methods as culture and gene sequencing (mip and rpoB), and passing through innovative approaches as MALDI-TOF MS technique and whole genome sequencing (WGS). The results obtained, were compared to identify the Legionella isolates, and lead to four presumptive novel Legionella species identification. One of these four new isolates was characterized and recognized at taxonomy level with the name of Legionella bononiensis (the 64th Legionella species). The workflow applied in this thesis, help to increase the knowledge of Legionella environmental species, improving the description of the environment itself and the events that promote the growth of Legionella in their ecological niche. The correct identification and characterization of the isolates permit to prevent their spread in man-made environment and contain the occurrence of cases, clusters, or outbreaks. Therefore, the experimental work undertaken, could support the preventive measures during environmental and clinical surveillance, improving the study of species often underestimated or still unknown.