Photosynthetic responses of tropical tree species from different successional groups under contrasting irradiance conditions

This study evaluated the photosynthetic responses of seven tropical trees of different successional groups under contrasting irradiance conditions, taking into account changes in gas exchange and chlorophyll a fluorescence. Although early successional species have shown higher values of CO2 assimilation (A) and transpiration (E), there was not a defined pattern of the daily gas exchange responses to high irradiance (FSL) among evaluated species. Cariniana legalis (Mart.) Kuntze (late secondary) and Astronium graveolens Jacq. (early secondary) exhibited larger reductions in daily-integrated CO2 assimilation (DIA) when transferred from medium light (ML) to FSL. On the other hand, the pioneer species Guazuma ulmifolia Lam. had significant DIA increase when exposed to FSL. The pioneers Croton spp. trended to show a DIA decrease around 19%, while Cytharexyllum myrianthum Cham. (pioneer) and Rhamnidium elaeocarpum Reiss. (early secondary) trended to increase DIA when transferred to FSL. Under this condition, all species showed dynamic photoinhibition, except for C. legalis that presented chronic photoinhibition of photosynthesis. Considering daily photosynthetic processes, our results supported the hypothesis of more flexible responses of early successional species (pioneer and early secondary species). The principal component analysis indicated that the photochemical parameters effective quantum efficiency of photosystem II and apparent electron transport rate were more suitable to separate the successional groups under ML condition, whereas A and E play a major role to this task under FSL condition.

Energy and Dynamics of the solar agricultural robot "SolarSprayer"

The main objective of the present study was to design an agricultural robot, which work is based on the generation of the electricity by the solar panel. To achieve the proper operation of the robot according to the assumed working cycle the detailed design of the main equipment was made. By analysing the possible areas of implementation together with developments, the economic forecast was held. As a result a decision about possibility of such device working in agricultural sector was made and the probable topics of the further study were found out.

Relationships between crown architecture and available irradiance in two cerrado species with different leaf phenologies

Structural differences between cerrado species with different leaf phenologies are linked to crown architecture, leaf production, and biomass allocation to shoots and leaves. The present study characterized crown structures and the patterns of biomass allocation to leaves and shoots in two woody cerrado species with contrasting leaf phenologies and quantified the irradiance reaching their leaves to determine the best period during the day for photosynthetic activity. The shoots and leaves of five individuals of both Annona coriacea (deciduous) and Hymenaea stigonocarpa (evergreen) were collected along a 50 m transect in a cerrado fragment within the urban perimeter of Catalão - GO, to determine their patterns of biomass allocation in their crowns. The evergreen H. stigonocarpa had significantly higher mean values of shoot inclination (SI), petiole length (PL), leaf area (LA), leaf display index (LDI), and individual leaf area per shoot (ILA), while the deciduous species A. coriacea had significantly higher leaf numbers (LN). The more complex crown of H. stigonocarpa had shoots in more erect positions (orthotropic), with intense self-shading within shoots; A. coriacea, on the other hand, had slanting (plagiotropic) shoots in the crown, allowing similar irradiance levels to all leaf surfaces. The production of plagiotropic shoots by the deciduous species (A. coriacea) is a strategy that enables its use of incident sunlight early in the morning and preventing excessive water loss or excessive irradiance. Hymenaea stigonocarpa (an evergreen), by contrast, had orthotropic shoots and uses intense self-shading as a strategy to avoid excessive irradiance, especially at midday. Differences in crown architectures between evergreen and deciduous species of cerrado sensu stricto can therefore be viewed as adaptations to the environmental light regime.

Interphase cytogenetics using fluorescence in situ hybridization: an overview of its application to diffuse and solid tissue

Interphase cytogenetics, utilizing fluorescence in situ hybridization (FISH) techniques, has been successfully applied to diffuse and solid tissue specimens. Most studies have been performed on isolated cells, such as blood or bone marrow cells; a few have been performed on cells from body fluids, such as amniotic fluid, urine, sperm, and sputum. Mechanically or chemically disaggregated cells from solid tissues have also been used as single cell suspensions for FISH. Additionally, intact organized tissue samples represented by touch preparations or thin tissue sections have been used, especially in cancer studies. Advantages and pitfalls of application of FISH methodology to each type of specimen and some significant biological findings achieved are illustrated in this overview.

Solar Twins and Solar Analogues in Galactic Surveys.

The Sun is a crucial benchmark for how we see the universe. Especially when it comes to the visible range of the spectrum, stars are commonly compared to the Sun, as it is the most thoroughly studied star. In this work I have focussed on two aspects of the Sun and how it is used in modern astronomy. Firstly, I try to answer the question on how similar to the Sun another star can be. Given the limits of observations, we call a solar twin a star that has the same observed parameters as the Sun within its errors. These stars can be used as stand-in suns when doing observations, as normal night-time telescopes are not built to be pointed at the Sun. There have been many searches for these twins and every one of them provided not only information on how close to the Sun another star can be, but also helped us to understand the Sun itself. In my work I have selected _ 300 stars that are both photometrically and spectroscopically close to the Sun and found 22 solar twins, of which 17 were previously unknown and can therefore help the emerging picture on solar twins. In my second research project I have used my full sample of 300 solar analogue stars to check the temperature and metallicity scale of stellar catalogue calibrations. My photometric sample was originally drawn from the Geneva-Copenhagen-Survey (Nordström et al. 2004; Holmberg et al. 2007, 2009) for which two alternative calibrations exist, i.e. GCS-III (Holmberg et al. 2009) and C11 (Casagrande et al. 2011). I used very high resolution spectra of solar analogues, and a new approach to test the two calibrations. I found a zero–point shift of order of +75 K and +0.10 dex in effective temperature and metallicity, respectively, in the GCS-III and therefore favour the C11 calibration, which found similar offsets. I then performed a spectroscopic analysis of the stars to derive effective temperatures and metallicities, and tested that they are well centred around the solar values.

La gran penisola della Scandia : madre d'innumerabili esserciti, e regali famiglie per tutta l'Europa diffuse

Kartta kuuluu A. E. Nordenskiöldin kokoelmaan

Comparison of Different Concentrated Solar Power Collector Designs and Development of a Linear Fresnel Solar Collector Model

Concentrated solar power (CSP) is a renewable energy technology, which could contribute to overcoming global problems related to pollution emissions and increasing energy demand. CSP utilizes solar irradiation, which is a variable source of energy. In order to utilize CSP technology in energy production and reliably operate a solar field including thermal energy storage system, dynamic simulation tools are needed in order to study the dynamics of the solar field, to optimize production and develop control systems. The object of this Master’s Thesis is to compare different concentrated solar power technologies and configure a dynamic solar field model of one selected CSP field design in the dynamic simulation program Apros, owned by VTT and Fortum. The configured model is based on German Novatec Solar’s linear Fresnel reflector design. Solar collector components including dimensions and performance calculation were developed, as well as a simple solar field control system. The preliminary simulation results of two simulation cases under clear sky conditions were good; the desired and stable superheated steam conditions were maintained in both cases, while, as expected, the amount of steam produced was reduced in the case having lower irradiation conditions. As a result of the model development process, it can be concluded, that the configured model is working successfully and that Apros is a very capable and flexible tool for configuring new solar field models and control systems and simulating solar field dynamic behaviour.

Interfacial effects in organic solar cells

Solceller baserade på organiska halvledare erbjuder en möjlighet till storskalig och billig solenergiproduktion. Organiska halvledare har den fördelen att de är lösningsprocesserbara vilket gör att solceller och andra elektroniska komponenter baserade på dessa halvledare kan tillverkas vid låga temperaturer och med liten energiförbrukning. Nackdelen med dessa material är deras strukturella och energetiska oordning som leder till lägre effektivitet. För att organiska solceller ska kunna kommersialiseras krävs grundläggande insikter i de olika processer som begränsar effektiviteten. En stor del av forskningen om dessa processer har varit fokuserad kring egenskaperna av solcellens olika komponenter (de aktiva materialen) som sådana, medan gränsytorna mellan olika material har fått mindre uppmärksamhet. Gränsytor mellan olika material har distinkt olika egenskaper jämfört med ett rent material, och gränsytors olika egenskaper kan ha en väldigt stor inverkan på hur solcellerna fungerar. Syftet med denna avhandling är att klargöra några olika gränsyterelaterade effekter i organiska dioder och solceller. De gränsytor som behandlas är gränsytan mellan kontakten och det aktiva lagret (metall-organisk) och gränsytan mellan donor och acceptor (organisk-organisk). Resultaten visar att metall-organiska gränsytor måste designas noggrant för att begränsa förlust av effektivitet. En icke-idealisk kontakt leder till starkt reducerad effektivitet på grund av att elektronerna extraheras ineffektivt. Även till synes idealiska kontakter kan orsaka förluster genom spontan laddningsöverföring från metallen till det organiska lagret som effektivt sett minskar på den spänning som cellen kan alstra. Den organisk-organiska gränsytan påverkar hur mycket ström cellen kan alstra och beroende på gränsytans beskaffenhet kan de negativa rekombinationsprocesserna i materialet kontrolleras. ------------------------------------------------- Orgaanisille puolijohteille perustuvat aurinkokennot mahdollistavat suurimuotoisen ja edullisen aurinkoenergiatuotannon. Orgaanisten puolijohteiden etu on että ne voidaan liuottaa, jolloin aurinkokennot ja muut näille johteille perustuvat elektroniset komponentit voidaan valmistaa alhaisessa lämpötilassa kuluttaen vähän energiaa. Materiaalien huonona puolena on kuitenkin niiden rakenteellinen ja energeettinen epäjärjestys, jonka seurauksena niiden tehokkuus on huonompi. Orgaanisten aurinkokennojen kaupallistaminen edellyttää perustavanlaatuista ymmärystä tehokkuutta rajoittavista prosesseista. Aurinkokennotutkimus on pääosin keskittynyt aurinkokennon eri komponenttien (aktiivisten materiaalien) ominaisuuksiin, kun taas eri materiaalien rajapinnat ovat jääneet vähemmälle huomiolle. Eri materiaalien välisillä rajapinnoilla on huomattavan erilaisia ominaisuuksia verrattuna puhtaisiin materiaaleihin. Rajapintojen ominaisuudet voivat kuitenkin vaikuttaa merkittävästi aurinkokennojen toimintaan. Tämän väitöstutkimuksen tarkoituksena on selventää joitain rajapintoihin liittyviä toimintoja orgaanisissa diodeissa ja aurinkokennoissa. Käsiteltävät rajapinnat ovat rajapinta kontaktin ja aktiivisen kerroksen välillä (metallis-orgaaninen) ja rajapinta donorin ja akseptorin välillä (orgaanis-orgaaninen). Tutkimustulokset osoittavat, että metallis-orgaaniset rajapinnat tulee suunnitella huolellisesti, jotta tehokkuuden alenemista voidaan rajoittaa. Mikäli kontakti ei ole ideaalisti suunniteltu, vähenee tehokkuus huomattavasti, mikä johtuu elektronien tehottomasta ekstrahoinnista. Jopa ideaalisilta vaikuttavat kontaktit voivat johtaa tehokkuuden alenemiseen, mikäli varaus siirtyy spontaanisti metallista orgaaniseen kerrokseen, sillä tämä alentaa jännitettä jonka kenno voi tuottaa. Kennon orgaanis-orgaaninen rajapinta vaikuttaa siihen, kuinka paljon virtaa kenno pystyy tuottamaan. Rajapinnan ominaisuuksista riippuen materiaalin rekombinaatio on hallittavissa.

Analyzing the Effects of the New Renewable Energy Policy in Russia on Investments into Wind, Solar and Small Hydro Power

This thesis presents an analysis of recently enacted Russian renewable energy policy based on capacity mechanism. Considering its novelty and poor coverage by academic literature, the aim of the thesis is to analyze capacity mechanism influence on investors’ decision-making process. The current research introduces a number of approaches to investment analysis. Firstly, classical financial model was built with Microsoft Excel® and crisp efficiency indicators such as net present value were determined. Secondly, sensitivity analysis was performed to understand different factors influence on project profitability. Thirdly, Datar-Mathews method was applied that by means of Monte Carlo simulation realized with Matlab Simulink®, disclosed all possible outcomes of investment project and enabled real option thinking. Fourthly, previous analysis was duplicated by fuzzy pay-off method with Microsoft Excel®. Finally, decision-making process under capacity mechanism was illustrated with decision tree. Capacity remuneration paid within 15 years is calculated individually for each RE project as variable annuity that guarantees a particular return on investment adjusted on changes in national interest rates. Analysis results indicate that capacity mechanism creates a real option to invest in renewable energy project by ensuring project profitability regardless of market conditions if project-internal factors are managed properly. The latter includes keeping capital expenditures within set limits, production performance higher than 75% of target indicators, and fulfilling localization requirement, implying producing equipment and services within the country. Occurrence of real option shapes decision-making process in the following way. Initially, investor should define appropriate location for a planned power plant where high production performance can be achieved, and lock in this location in case of competition. After, investor should wait until capital cost limit and localization requirement can be met, after that decision to invest can be made without any risk to project profitability. With respect to technology kind, investment into solar PV power plant is more attractive than into wind or small hydro power, since it has higher weighted net present value and lower standard deviation. However, it does not change decision-making strategy that remains the same for each technology type. Fuzzy pay-method proved its ability to disclose the same patterns of information as Monte Carlo simulation. Being effective in investment analysis under uncertainty and easy in use, it can be recommended as sufficient analytical tool to investors and researchers. Apart from described results, this thesis contributes to the academic literature by detailed description of capacity price calculation for renewable energy that was not available in English before. With respect to methodology novelty, such advanced approaches as Datar-Mathews method and fuzzy pay-off method are applied on the top of investment profitability model that incorporates capacity remuneration calculation as well. Comparison of effects of two different RE supporting schemes, namely Russian capacity mechanism and feed-in premium, contributes to policy comparative studies and exhibits useful inferences for researchers and policymakers. Limitations of this research are simplification of assumptions to country-average level that restricts our ability to analyze renewable energy investment region wise and existing limitation of the studying policy to the wholesale power market that leaves retail markets and remote areas without our attention, taking away medium and small investment into renewable energy from the research focus. Elimination of these limitations would allow creating the full picture of Russian renewable energy investment profile.

Hepatitis C virus seroprevalence and genotypes in patients with diffuse connective tissue diseases and spondyloarthropathies

Many extrahepatic manifestations, including rheumatic diseases, have been reported to be associated with hepatitis C virus (HCV) infection. In order to investigate the prevalence of HCV infection among patients with rheumatic diseases, in the present study we interviewed 367 patients and tested their blood samples for HCV antibodies (anti-HCV) by an enzyme-linked immunosorbent assay. Anti-HCV-reactive samples were retested for confirmation by a line immunoassay and also for HCV RNA detection by the polymerase chain reaction. HCV RNA-positive samples were genotyped by INNO-LIPA. An overall HCV infection prevalence of 1.9% (7/367) was found. Of the 7 HCV-infected patients, 4 had systemic lupus erythematosus and 3 rheumatoid arthritis, resulting in positivity rates of 2.3 and 3.4%, respectively. HCV RNA genotyping revealed the presence of subtypes 1a (57.1%), 1b (28.6%) and 3a (14.3%). The clinical course was favorable for all HCV-infected patients, except one, who died due to renal insufficiency related to lupus nephritis. These results demonstrate a low HCV infection prevalence among the population studied. In the few positive cases, we observed no adverse influence of this infection on the clinical evolution of the rheumatic disease.

Results of CHOP chemotherapy for diffuse large B-cell lymphoma

Patients with diffuse large B-cell lymphoma treated in a University Hospital were studied from 1990 to 2001. Two treatment regimens were used: ProMACE-CytaBOM and then, from November 1996 on, the CHOP regimen. Complete remission (CR), disease-free survival (DFS), and overall survival (OS) rates were determined. Primary refractory patients and relapsed patients were also assessed. A total of 111 patients under 60 years of age were assessed and ranked according to the international prognostic index adjusted to age. Twenty (18%) of them were classified as low risk, 40 (36%) as intermediate risk, 33 (29.7%) as high intermediate risk, and 18 (16.3%) as high risk. Over a five-year period, OS and DFS rates were 71 and 59%, respectively, for all patients. For the same time period, OS and DFS rates were 72.8 and 61.3%, respectively, for 77 patients treated with CHOP chemotherapy and 71.3 and 60% for patients treated with the ProMACE-CytaBOM protocol. There was no significant difference in OS or DFS between the two groups. Eleven of 50 refractory and relapsed patients were consolidated with high doses of chemotherapy. Three received allogenic and 8 autologous bone marrow transplantation. For the latter, CR was 62.5% and mean OS was 41.1 months. The clinical behavior, CR, DFS, and OS of the present patients were similar to those reported in the literature. We conclude that both the CHOP and ProMACE-CytaBOM protocols can be used to treat diffuse large B-cell lymphoma patients, although the CHOP protocol is preferable because of its lower cost and lower toxicity.

Duodenal gastric metaplasia and Helicobacter pylori infection in patients with diffuse nodular duodenitis

Whether the regression of gastric metaplasia in the duodenum can be achieved after eradication of Helicobacter pylori is not clear. The aim of the present study was to investigate the relationship between H. pylori infection and gastric metaplasia in patients with endoscopic diffuse nodular duodenitis. Eighty-six patients with endoscopically confirmed nodular duodenitis and 40 control patients with normal duodenal appearance were investigated. The H. pylori-positive patients with duodenitis received anti-H. pylori triple therapy (20 mg omeprazole plus 250 mg clarithromycin and 400 mg metronidazole, all twice daily) for one week. A control endoscopy was performed 6 months after H. pylori treatment. The H. pylori-negative patients with duodenitis received 20 mg omeprazole once daily for 6 months and a control endoscopy was performed 2 weeks after treatment. The prevalence of H. pylori infection was 58.1%, and the prevalence of gastric metaplasia was 57.0%. Seventy-six patients underwent endoscopy again. No influence on the endoscopic appearance of nodular duodenitis was found after eradication of H. pylori or acid suppression therapy. However, gastric metaplasia significantly decreased and complete regression was achieved in 15/28 patients (53.6%) 6 months after eradication of H. pylori, accompanied by significant improvement of other histological alterations. Only mild chronic inflammation, but not gastric metaplasia, was found in the control group, none with H. pylori infection in the duodenal bulb. Therefore, H. pylori infection is related to the extent of gastric metaplasia in the duodenum, but not to the presence of diffuse nodular duodenitis.

First-principles study on electronic and structural properties of Cu(In/Ga)Se alloys for solar cells

Thin-film photovoltaic solar cells based on the Cu(In1−xGax)Se2 (CIGS) alloys have attracted more and more attention due to their large optical absorption coefficient, long term stability, low cost, and high efficiency. Modern theoretical studies of this material with first-principles calculations can provide accurate description of the electronic structure and yield results in close agreement with experimental values, but takes a large amount of calculation time. In this work, we use first-principles calculations based on the computationally affordable meta- generalized gradient approximation of the density-functional theory to investigate electronic and structural properties of the CIGS alloys. We report on the simulation of the lattice parameters and band gaps, as a function of chemical composition. The obtained results were found to be in a good agreement with the available experimental data.

Large scale solar power plant flat roof and carport installation in Finland

This work focuses on the 159.5 kW solar photovoltaic power plant project installed at the Lappeenranta University of Technology in 2013 as an example of what a solar plant project could be in Finland. The project consists of a two row carport and a flat roof installation on the roof of the university laboratories. The purpose of this project is not only its obvious energy savings potential but also to serve as research and teaching laboratory tool. By 2013, there were not many large scale solar power plants in Finland. For this reason, the installation and data experience from the solar power plant at LUT has brought valuable information for similar projects in northern countries. This work includes a first part for the design and acquisition of the project to continue explaining about the components and their installation. At the end, energy produced by this solar power plant is studied and calculated to find out some relevant economical results. For this, the radiation arriving to southern Finland, the losses of the system in cold weather and the impact of snow among other aspects are taken into account.