Morphological Functions with Parallel Sets for the Pore Space of X-ray CT Images of Soil Columns

During the last few decades, new imaging techniques like X-ray computed tomography have made available rich and detailed information of the spatial arrangement of soil constituents, usually referred to as soil structure. Mathematical morphology provides a plethora of mathematical techniques to analyze and parameterize the geometry of soil structure. They provide a guide to design the process from image analysis to the generation of synthetic models of soil structure in order to investigate key features of flow and transport phenomena in soil. In this work, we explore the ability of morphological functions built over Minkowski functionals with parallel sets of the pore space to characterize and quantify pore space geometry of columns of intact soil. These morphological functions seem to discriminate the effects on soil pore space geometry of contrasting management practices in a Mediterranean vineyard, and they provide the first step toward identifying the statistical significance of the observed differences.

Robust fabrication of electrospun-like polymer mats to direct cell bahaviour

Currently, cell culture systems that include nanoscale topography are widely used in order to provide cells additional cues closer to the in vivo environment, seeking to mimic the natural extracellular matrix. Electrospinning is one of the most common techniques to produce nano fiber mats. However, since many sensitive parameters play an important role in the process, a lack of reproducibility is a major drawback. Here we present a simple and robust methodology to prepare reproducible electrospun-like samples. It consists of a polydimethylsiloxane mold reproducing the fiber pattern to solvent-cast a polymer solution and obtain the final sample. To validate this methodology, poly(L-lactic) acid (PLLA) samples were obtained and, after characterisation, bioactivity and ability to direct cell response were assessed. C2C12 myoblasts developed focal adhesions on the electrospun-like fibers and, when cultured under myogenic differentiation conditions, similar differentiation levels to electrospun PLLA fibers were obtained.

Vortex pinning vs superconducting wire network: origin of periodic oscillations induced by applied magnetic fields in superconducting films with arrays of nanomagnets

Hybrid magnetic arrays embedded in superconducting films are ideal systems to study the competition between different physical (such as the coherence length) and structural length scales such as are available in artificially produced structures. This interplay leads to oscillation in many magnetically dependent superconducting properties such as the critical currents, resistivity and magnetization. These effects are generally analyzed using two distinct models based on vortex pinning or wire network. In this work, we show that for magnetic dot arrays, as opposed to antidot (i.e. holes) arrays, vortex pinning is the main mechanism for field induced oscillations in resistance R(H), critical current Ic(H), magnetization M(H) and ac-susceptibility χ ac(H) in a broad temperature range. Due to the coherence length divergence at Tc, a crossover to wire network behaviour is experimentally found. While pinning occurs in a wide temperature range up to Tc, wire network behaviour is only present in a very narrow temperature window close to Tc. In this temperature interval, contributions from both mechanisms are operational but can be experimentally distinguished.

Experimental tests in human-robot collision evaluation and characterization of a new safety index for robot operation

This paper describes an experimental procedure consisting of impact tests that simulate a collision of a human head with an industrial robot with the aim to validate a safety index named as New Index for Robots (NIR) and its outputs. The experiments in this paper are based on lab tests. It is an attempt to characterize the NIR index underlying the main parameters that are involved in crash interaction and to highlight limitations and weakness of suggested impact tests.

El paralelo. Bosquejo de un método gráfico = The parallel. Sketch of a graphical method

El paralelo gráfico ha sido -y continúa siendo- un excepcional método para conocer, aprender, investigar y difundir la forma arquitectónica y urbana. Aquí intentamos esbozar los principios que rigen su elaboración y echar un leve vistazo a alguno de los jalones de su intensa historia, que merecería una atención más pausada.

Historiografía y geometría: Ventura Rodríguez y la iglesia de San Marcos en Madrid

Frente al lugar común sobre el conocimiento y la apreciación crítica de esta obra de arquitectura, basado fundamentalmente en la referencia historiográfica a diversos modelos y en el supuesto entramado geométrico de un conjunto de elipses, a veces óvalos, se propone aquí una distinta interpretación de la estructura formal y espacial de la iglesia, deducida de una atención preferente a la obra de arquitectura utilizando los recursos específicamente disciplinares de la misma, en especial del dibujo, evidenciando la conveniencia de una constante revisión crítica de nuestra historiografía arquitectónica.

Linking land cover changes in the subalpine and montane belts to changes in a torrential river.

Channel cbanges are the consequence of cbanges in sediment yield from the slopes and in the connectivity between slopes and channels bccause of distinct land use and climate inJpacts. In Ibis study, we investigated the characteristics and evolution of a short reach in the headwater of the !juez River, central-soutbem Pyrenees. Assessment of a series of sedimentar)' and geomorphic structures confirtned major cbanges to the valley boUom, mainly related to changes in the intensity of human activity. 'The oldest sedimentar)' structure is a terrace leve! located 3 10 4 m above the current alluvial plain. General deforestation, overgrazing and recwring tires in the montane belt ( 1100-1600 m a.sJ.) have led 10 increased soil erosioo and connectivity, and to tbe triggering of debris llows thal have been deposited on the fluvial tmace. Woody fragments from within the debris llows were dated using acceleraror mass spectrOmetry '"e radiocaroon tcchniques (AMS), yielding ages between 1 00 and 115 cal years BP, whicb coincides with tbe period of maximum deforestalion and human density in the Pyrenees. Depopulation and fannland abaodonment since tbe beginning of tbe 2001 oenrury has resulled in generalliJcod natural and artificial reforestation, a shrinkage of the eroded arcas aod a decline in connectivi¡y bdween slopes and the channel. 1be rnost impor1an1 consequence has been cbannel incision and oarrowing, and the development of a sedimed annour !ayer. Active sedimenl b8llSpOI1 is continui.Qg, although there has been a decrease in sed.iment yield from the slopes. Copyright O 2014 John Wiley & Soos, Ltd.

Efecto residual de la aplicación de fertilizantes de nueva generación sobre la producción, composición y diversidad de pastos herbáceos en una dehesa toledana

La mejora de pastos herbáceos en la dehesa está asociada a la aplicación de fertilizantes fosfóricos con el objetivo de incrementar la producción de materia seca y el contenido de proteínas a través del aumento de la cantidad de leguminosas. El principal factor limitante para que la fertilización sea efectiva es la disponibilidad de agua, ya que en años con escasas precipitaciones no se registran aumentos de la producción ni del contenido en leguminosas. Por otra parte, en el caso de los fertilizantes fosfóricos existe un interesante efecto residual tras el cese de la aplicación, o bien un efecto retardado (aprovechamiento en año húmedo tras aplicación en año seco). Se evaluó el efecto residual de fertilizantes fosfóricos de nueva generación, sobre la producción, riqueza y diversidad herbácea en la dehesa. El experimento se realizó en el CIA Dehesón del Encinar?, Oropesa, durante el año 2013, en un área que había sido fertilizada durante tres años consecutivos con 36 UF de P2O5 a través de un fertilizante complejo NPK (de bajo contenido en N) o con fosfatos naturales de Gafsa. Si bien no se obtuvieron incrementos de materia seca en los tratamientos con fertilización, éstos presentaron un mayor contenido en leguminosas, y valores más altos de riqueza y diversidad.

Caracterización Avanzada de Tanques de Fermentación de Café mediante una Red Multidistribuida de Sensores RFID

La fermentación de las bayas de café se considera una et apa crítica en el procesado del café debido a su impacto en la calidad final del producto. La temperatura es una de las principales variables de control que puede ser utilizada para predecir el final del proceso, teniendo en cuenta que varios autores indican que el control de esta etapa es fundamental para evitar la mala calidad de la be bida final. En la práctica, la fermentación es el paso menos controlado del proceso, haciendo que los beneficiaderos operen lejos de sus condiciones óptimas en términos de costes de operación (es decir, elevados consumos de energía y agua) y de calidad del producto final. El objetivo de este trabajo es caracterizar los gradientes de temperatura que se dan en los tanques de fermentación mediante una red multi-distribuida de sensores autónomos, inalámbricos y de bajo coste (registradores de temperatura del tipo RFID, identificadores de radiofrecuencia semipasivos modelo TurboTag®).Para ello se utilizan dos metodologías: la interpolación espacial en coordenadas polares y los diagramas de espacio de fase. Se supervisaron dos fermentaciones reales de café, en El Cauca (Colombia), mediante sensores sumergidos directamente en la masa en fermentación. Los fermentadores eran tanques de plástico cubiertos, uno de ellos colocado en el interior de un almacén, permaneciendo el otro a la intemperie. El rango de variación máximo de temperatura en los tanques fue de 4,5ºC. La interpolación espacial mostró, incluso en el fermentador bajo las condiciones menos desfavorables en el interior del almacén, un gradiente radial de temperatura instantáneo de 0,1 °C/cm desde el centro hasta el perímetro del tanque y un gradiente vertical de temperatura de 0,25 °C/cm para sensores con coordenadas polares iguales. La combinación de ambas metodologías permitió la identificación consistente de los puntos calientes y fríos de ambas fermentaciones.

Advanced Characterisation of a Coffee Fermenting Tank by Multi-distributed Wireless Sensors: Spatial Interpolation and Phase Space Graphs

The fermentation stage is considered to be one of the critical steps in coffee processing due to its impact on the final quality of the product. The objective of this work is to characterise the temperature gradients in a fermentation tank by multi-distributed, low-cost and autonomous wireless sensors (23 semi-passive TurboTag® radio-frequency identifier (RFID) temperature loggers). Spatial interpolation in polar coordinates and an innovative methodology based on phase space diagrams are used. A real coffee fermentation process was supervised in the Cauca region (Colombia) with sensors submerged directly in the fermenting mass, leading to a 4.6 °C temperature range within the fermentation process. Spatial interpolation shows a maximum instant radial temperature gradient of 0.1 °C/cm from the centre to the perimeter of the tank and a vertical temperature gradient of 0.25 °C/cm for sensors with equal polar coordinates. The combination of spatial interpolation and phase space graphs consistently enables the identification of five local behaviours during fermentation (hot and cold spots).

Geometrical characterization of undisturbed soil samples using X-ray computed tomography image analysis. Effect of soil management on soil structure

El estudio de la estructura del suelo es de vital importancia en diferentes campos de la ciencia y la tecnología. La estructura del suelo controla procesos físicos y biológicos importantes en los sistemas suelo-planta-microorganismos. Estos procesos están dominados por la geometría de la estructura del suelo, y una caracterización cuantitativa de la heterogeneidad de la geometría del espacio poroso es beneficiosa para la predicción de propiedades físicas del suelo. La tecnología de la tomografía computerizada de rayos-X (CT) nos permite obtener imágenes digitales tridimensionales del interior de una muestra de suelo, proporcionando información de la geometría de los poros del suelo y permitiendo el estudio de los poros sin destruir las muestras. Las técnicas de la geometría fractal y de la morfología matemática se han propuesto como una poderosa herramienta para analizar y cuantificar características geométricas. Las dimensiones fractales del espacio poroso, de la interfaz poro-sólido y de la distribución de tamaños de poros son indicadores de la complejidad de la estructura del suelo. Los funcionales de Minkowski y las funciones morfológicas proporcionan medios para medir características geométricas fundamentales de los objetos geométricos tridimensionales. Esto es, volumen, superficie, curvatura media de la superficie y conectividad. Las características del suelo como la distribución de tamaños de poros, el volumen del espacio poroso o la superficie poro-solido pueden ser alteradas por diferentes practicas de manejo de suelo. En este trabajo analizamos imágenes tomográficas de muestras de suelo de dos zonas cercanas con practicas de manejo diferentes. Obtenemos un conjunto de medidas geométricas, para evaluar y cuantificar posibles diferencias que el laboreo pueda haber causado en el suelo. ABSTRACT The study of soil structure is of vital importance in different fields of science and technology. Soil structure controls important physical and biological processes in soil-plant-microbial systems. Those processes are dominated by the geometry of soil pore structure, and a quantitative characterization of the spatial heterogeneity of the pore space geometry is beneficial for prediction of soil physical properties. The technology of X-ray computed tomography (CT) allows us to obtain three-dimensional digital images of the inside of a soil sample providing information on soil pore geometry and enabling the study of the pores without disturbing the samples. Fractal geometry and mathematical morphological techniques have been proposed as powerful tools to analyze and quantify geometrical features. Fractal dimensions of pore space, pore-solid interface and pore size distribution are indicators of soil structure complexity. Minkowski functionals and morphological functions provide means to measure fundamental geometrical features of three-dimensional geometrical objects, that is, volume, boundary surface, mean boundary surface curvature, and connectivity. Soil features such as pore-size distribution, pore space volume or pore-solid surface can be altered by different soil management practices. In this work we analyze CT images of soil samples from two nearby areas with contrasting management practices. We performed a set of geometrical measures, some of them from mathematical morphology, to assess and quantify any possible difference that tillage may have caused on the soil.

Ice volume estimates from ground-penetrating radar surveys, Wedel Jarlsberg Land glaciers, Svalbard

We present ground-penetrating radar (GPR)—based volume calculations, with associated error estimates, for eight glaciers on Wedel Jarlsberg Land, southwestern Spitsbergen, Svalbard, and compare them with those obtained from volume-area scaling relationships. The volume estimates are based upon GPR ice-thickness data collected during the period 2004–2013. The total area and volume of the ensemble are 502.91 ± 18.60 km2 and 91.91 ± 3.12 km3, respectively. The individual areas, volumes, and average ice thickness lie within 0.37–140.99 km2, 0.01–31.98 km3, and 28–227 m, respectively, with a maximum recorded ice thickness of 619 ± 13 m on Austre Torellbreen. To estimate the ice volume of unsurveyed tributary glaciers, we combine polynomial cross-sections with a function providing the best fit to the measured ice thickness along the center line of a collection of 22 surveyed tributaries. For the time-to-depth conversion of GPR data, we test the use of a glacierwide constant radio-wave velocity chosen on the basis of local or regional common midpoint measurements, versus the use of distinct velocities for the firn, cold ice, and temperate ice layers, concluding that the corresponding volume calculations agree with each other within their error bounds.

Brown trout thermal niche and climate change: expected changes in the distribution of cold-water fish in central Spain

This paper addresses the determination of the realized thermal niche and the effects of climate change on the range distribution of two brown trout populations inhabiting two streams in the Duero River basin (Iberian Peninsula) at the edge of the natural distribution area of this species. For reaching these goals, new methodological developments were applied to improve reliability of forecasts. Water temperature data were collected using 11 thermographs located along the altitudinal gradient, and they were used to model the relationship between stream temperature and air temperature along the river continuum. Trout abundance was studied using electrofishing at 37 sites to determine the current distribution. The RCP4.5 and RCP8.5 change scenarios adopted by the International Panel of Climate Change for its Fifth Assessment Report were used for simulations and local downscaling in this study. We found more reliable results using the daily mean stream temperature than maximum daily temperature and their respective seven days moving-average to determine the distribution thresholds. Thereby, the observed limits of the summer distribution of brown trout were linked to thresholds between 18.1ºC and 18.7ºC. These temperatures characterise a realised thermal niche narrower than the physiological thermal range. In the most unfavourable climate change scenario, the thermal habitat loss of brown trout increased to 38% (Cega stream) and 11% (Pirón stream) in the upstream direction at the end of the century; however, at the Cega stream, the range reduction could reach 56% due to the effect of a ?warm-window? opening in the piedmont reach.

Modelos de asentamiento en Medio Piura

Centrado en la cadena de doce asentamientos dispersos y de pequeña escala que se encuentran al norte de la ciudad de Piura, Perú. Proyecto realizado en colaboración con la Universidad de Piura. El proyecto trata de mejorar la calidad de vida se sus pobladores evitando riesgos e introduciendo nuevas infraestructuras, dotaciones y centros económicos. Gran preocupación por las conexiones entre los asentamientos y con las ciudades próximas, así como planteamiento de un sistema de infraestructuras de agua y recogida de residuos. Por último, se ejemplifica un modelo de centralidades económicas materializado en dos asentamientos concretos