Measurement of the tt̅ cross section in pp̅ collisions at √s=1.96 TeV using dilepton events with a lepton plus track selection

This paper reports a measurement of the cross section for the pair production of top quarks in ppbar collisions at sqrt(s) = 1.96 TeV at the Fermilab Tevatron. The data was collected from the CDF II detector in a set of runs with a total integrated luminosity of 1.1 fb^{-1}. The cross section is measured in the dilepton channel, the subset of ttbar events in which both top quarks decay through t -> Wb -> l nu b where l = e, mu, or tau. The lepton pair is reconstructed as one identified electron or muon and one isolated track. The use of an isolated track to identify the second lepton increases the ttbar acceptance, particularly for the case in which one W decays as W -> tau nu. The purity of the sample may be further improved at the cost of a reduction in the number of signal events, by requiring an identified b-jet. We present the results of measurements performed with and without the request of an identified b-jet. The former is the first published CDF result for which a b-jet requirement is added to the dilepton selection. In the CDF data there are 129 pretag lepton + track candidate events, of which 69 are tagged. With the tagging information, the sample is divided into tagged and untagged sub-samples, and a combined cross section is calculated by maximizing a likelihood. The result is sigma_{ttbar} = 9.6 +/- 1.2 (stat.) -0.5 +0.6 (sys.) +/- 0.6 (lum.) pb, assuming a branching ratio of BR(W -> ell nu) = 10.8% and a top mass of m_t = 175 GeV/c^2.

Measurement of the b-hadron production cross section using decays to μ-D0X final states in pp̅ collisions at √s=1.96 TeV

We report a measurement of the production cross section for b hadrons in pp̅ collisions at √s=1.96  TeV. Using a data sample derived from an integrated luminosity of 83  pb-1 collected with the upgraded Collider Detector (CDF II) at the Fermilab Tevatron, we analyze b hadrons, Hb, partially reconstructed in the semileptonic decay mode Hb→μ-D0X. Our measurement of the inclusive production cross section for b hadrons with transverse momentum pT>9  GeV/c and rapidity |y|<0.6 is σ=1.30  μb±0.05  μb(stat)±0.14  μb(syst)±0.07  μb(B), where the uncertainties are statistical, systematic, and from branching fractions, respectively. The differential cross sections dσ/dpT are found to be in good agreement with recent measurements of the Hb cross section and well described by fixed-order next-to-leading logarithm predictions.

Measurement of the tt̅ production cross section in 2 fb-1 of pp̅ collisions at √s=1.96 TeV using lepton plus jets events with soft muon b tagging

We present a measurement of the tt̅ production cross section in pp̅ collisions at √s=1.96  TeV using events containing a high transverse momentum electron or muon, three or more jets, and missing transverse energy. Events consistent with tt̅ decay are found by identifying jets containing candidate heavy-flavor semileptonic decays to muons. The measurement uses a CDF run II data sample corresponding to 2  fb-1 of integrated luminosity. Based on 248 candidate events with three or more jets and an expected background of 79.5±5.3 events, we measure a production cross section of 9.1±1.6  pb.

Measurement of the b-hadron production cross section using decays to μ-D0X final states in pp̅ collisions at √s=1.96 TeV

We report a measurement of the production cross section for b hadrons in pp̅ collisions at √s=1.96  TeV. Using a data sample derived from an integrated luminosity of 83  pb-1 collected with the upgraded Collider Detector (CDF II) at the Fermilab Tevatron, we analyze b hadrons, Hb, partially reconstructed in the semileptonic decay mode Hb→μ-D0X. Our measurement of the inclusive production cross section for b hadrons with transverse momentum pT>9  GeV/c and rapidity |y|<0.6 is σ=1.30  μb±0.05  μb(stat)±0.14  μb(syst)±0.07  μb(B), where the uncertainties are statistical, systematic, and from branching fractions, respectively. The differential cross sections dσ/dpT are found to be in good agreement with recent measurements of the Hb cross section and well described by fixed-order next-to-leading logarithm predictions.

Measurement of the tt̅ production cross section in 2 fb-1 of pp̅ collisions at √s=1.96 TeV using lepton plus jets events with soft muon b tagging

We present a measurement of the tt̅ production cross section in pp̅ collisions at √s=1.96  TeV using events containing a high transverse momentum electron or muon, three or more jets, and missing transverse energy. Events consistent with tt̅ decay are found by identifying jets containing candidate heavy-flavor semileptonic decays to muons. The measurement uses a CDF run II data sample corresponding to 2  fb-1 of integrated luminosity. Based on 248 candidate events with three or more jets and an expected background of 79.5±5.3 events, we measure a production cross section of 9.1±1.6  pb.

Measurement of the b-hadron production cross section using decays to μ-D0X final states in pp̅ collisions at √s=1.96 TeV

We report a measurement of the production cross section for b hadrons in p-pbar collisions at sqrt{s}=1.96 TeV. Using a data sample derived from an integrated luminosity of 83 pb^-1 collected with the upgraded Collider Detector (CDF II) at the Fermilab Tevatron, we analyze b hadrons, H_b, partially reconstructed in the semileptonic decay mode H_b -> mu^- D^0 X. Our measurement of the inclusive production cross section for b hadrons with transverse momentum p_T > 9 GeV/c and rapidity |y|

Measurement of the tt̅ production cross section in 2 fb-1 of pp̅ collisions at √s=1.96 TeV using lepton plus jets events with soft muon b tagging

We present a measurement of the $\ttbar$ production cross section in $\ppbar$ collisions at $\sqrt{s}=1.96$ TeV using events containing a high transverse momentum electron or muon, three or more jets, and missing transverse energy. Events consistent with $\ttbar$ decay are found by identifying jets containing candidate heavy-flavor semileptonic decays to muons. The measurement uses a CDF Run II data sample corresponding to $2 \mathrm{fb^{-1}}$ of integrated luminosity. Based on 248 candidate events with three or more jets and an expected background of $79.5\pm5.3$ events, we measure a production cross section of $9.1\pm 1.6 \mathrm{pb}$.

The Impact of Readily Detected- and Underlying Attributes on Social Integration in Cross-Cultural Settings

The benefits and drawbacks of homogeneity and heterogeneity have been debated at length. Whereas some researchers assert that heterogeneity is beneficial for groups that are engaged in complex problem solving, the other researchers emphasize the potential costs associated with diversity. The inconsistency is a result of the incomplete measurement of diversity and focus one or two types of diversity. Most research concentrates on the readily detected/visible characteristics, making the assumption that such characteristics are related to underlying attributes (e.g., attitudes and values). In many cases, the demographic characteristics do not covary perfectly with the psychological attributes. Thus both types of attributes need to be utilized to fully understand the impact of diversity. The present research with four essays takes into account both types of attributes and tests their impact on social integration in cross-cultural settings. The results indicate that: (1) readily detectable- and underlying attributes are not related; (2) diversity has overall a negative impact on social integration; (3) socio-cultural context potentially influences the salience of diversity; and (4) diversity and social integration influences the formation of social cognition in form of transactive memory directories. The limits of research and managerial implications are discussed.

Elimination of cross-talk in diffuse optical tomographic reconstructions through a weighted update procedure: results of simulation study - art. no. 61640S

Reconstructions in optical tomography involve obtaining the images of absorption and reduced scattering coefficients. The integrated intensity data has greater sensitivity to absorption coefficient variations than scattering coefficient. However, the sensitivity of intensity data to scattering coefficient is not zero. We considered an object with two inhomogeneities (one in absorption and the other in scattering coefficient). The standard iterative reconstruction techniques produced results, which were plagued by cross talk, i.e., the absorption coefficient reconstruction has a false positive corresponding to the location of scattering inhomogeneity, and vice-versa. We present a method to remove cross talk in the reconstruction, by generating a weight matrix and weighting the update vector during the iteration. The weight matrix is created by the following method: we first perform a simple backprojection of the difference between the experimental and corresponding homogeneous intensity data. The built up image has greater weightage towards absorption inhomogeneity than the scattering inhomogeneity and its appropriate inverse is weighted towards the scattering inhomogeneity. These two weight matrices are used as multiplication factors in the update vectors, normalized backprojected image of difference intensity for absorption inhomogeneity and the inverse of the above for the scattering inhomogeneity, during the image reconstruction procedure. We demonstrate through numerical simulations, that cross-talk is fully eliminated through this modified reconstruction procedure.

Quantitation of serological cross-reactivity between two geographical isolates of Oryctes baculovirus by a modified ELISA

An assay was developed for quantitation of the antigenic relationship between viruses, by modification of the indirect ELISA. The principle of this method is to estimate the epitopes not shared between the related viruses, after titration of the antibodies specific to the common epitopes as in a blocking ELISA. In practice, varying concentrations of purified virus are preincubated with a fixed dilution of heterologous or homologous antiserum and the unbound antibodies present in the mixture are back titrated with virus particles bound to microtitre plates. The antigenic relationship is described in terms of differentiation index (DI) and total antigenic reactivity (TAR). This method has been used to quantitate cross-reactivity between two geographically different isolates of Oryctes baculovirus.