Hanseníase no município de Fortaleza, CE, Brasil: aspectos epidemiológicos e operacionais em menores de 15 anos (1995-2006)

Estudo transversal que objetiva analisar a ocorrência de casos de hanseníase em menores de 15 anos de idade residentes no Município de Fortaleza e notificados no SINAN. Os indicadores epidemiológicos nesta população mostram hiperendemicidade. Operacionalmente observa-se a manutenção da concentração de atendimento em algumas unidades de referência, apesar de alguns avanços. Diagnóstico tardio, elevado grau de incapacidade no diagnóstico e baixo grau de avaliação de contatos registrados revelam a fragilidade das ações de controle. Ressalta-se a possibilidade de erro diagnóstico frente às características da infecção nesta população. A ocorrência de casos de hanseníase nesta população representa um indicador epidemiológico de grande relevância e sua análise amplia a discussão sobre problemas operacionais na rede de serviços de saúde.

New tick records in Rondônia, Western Brazilian Amazon

In the present study, we provide new tick records from Vilhena Municipality, in the Southeast of the State of Rondônia, Northern Brazil. Ticks collected from a capybara, Hydrochoerus hydrochaeris (Linnaeus), were identified as Amblyomma romitii Tonelli-Rondelli (1 female), and Amblyomma sp. (1 larva). Ticks collected from a harpy eagle, Harpia harpyja (Linnaeus), were identified as Amblyomma cajennense (Fabricius) (16 nymphs) and Haemaphysalis juxtakochi Cooley (1 nymph). Ticks collected from a yellow-footed tortoise, Chelonoidis denticulada (Linnaeus), were identified as Amblyomma rotundatum Koch (10 females, 2 nymphs), and Amblyomma sp. (2 larvae). The present record of A. romitii is the first in the State of Rondônia, and represents the southernmost record for this tick species, indicating that its distribution area is much larger than currently recognized. Although both A. cajennense and H. juxtakochi have been reported parasitizing various bird species, we provide the first tick records on a harpy eagle. A. rotundatum is widespread in the State of Rondônia, and has been previously reported on the yellow-footed tortoise. The present records increase the tick fauna of Rondônia to 26 species.

Deficiência de vitamina A em pré-escolares da cidade do Recife, Nordeste do Brasil

RESUMO. O objetivo deste estudo foi avaliar a prevalência de deficiência de vitamina A (DVA) em pré-escolares da cidade do Recife, Nordeste Brasileiro. A amostra foi composta por 344 crianças, de 24 a 60 meses, de ambos os sexos, em 18 creches públicas da cidade do Recife, em 2007. O estado nutricional de vitamina A foi avaliado pelos indicadores bioquímico (retinol sérico) e dietético (inquérito de consumo alimentar) e o status pondo-estatural através dos índices antropométricos peso/idade (P/I), altura/idade (A/I) e peso/altura (P/A). A prevalência de níveis de retinol sérico baixos (<0,70μmol/L) foi de 7,7 por cento (IC 95 por cento 4,88 – 11,81), caracterizando a DVA como problema de saúde pública do tipo leve, segundo critérios da Organização Mundial de Saúde. Por outro lado, 29,6 por cento (IC 95 por cento 24,22 – 35,63) das crianças apresentaram níveis aceitáveis ou marginais (0,70 a 1,04μmol/L) de retinol. Em relação ao consumo de vitamina A, os valores abaixo da EAR (Estimated Average Requirement), de 210μg/dia para crianças de 24 a 47 meses e de 275μg/dia para crianças de 48 a 96 meses de idade foi de 8,1 por cento e 21,3 por cento, respectivamente. As prevalências de déficits antropométricos (<-2 escores –Z) nos pré-escolares foram de 2,5 por cento para o indicador P/I, de 8,6 por cento quanto ao A/I e de 1,5 por cento em relação ao P/A. Os dados acima evidenciam a importância da institucionalização para o adequado estado nutricional das crianças e manutenção dos estoques adequados de vitamina A. Todavia, são necessários mais estudos enfocando pré-escolares não institucionalizados, ou seja, crianças que vivem fora do ambiente privilegiado das creches

Impacto da Proteína-C reativa no risco cardiovascular de adolescentes

Vários estudos sugerem que a proteína-C reativa (PCR) se correlaciona com doença arterial coronariana em adultos. Entretanto, essa associação ainda é pouco explorada em adolescentes. Avaliar a associação entre a PCR e os fatores de risco cardiovascular em adolescentes obesos. Oitenta e quatro adolescentes (12,6 ± 1,3 anos), ambos os sexos, foram distribuídos nos grupos Eutrófico (n = 28), Sobrepeso (n = 28) e Obeso (n = 28), segundo o índice de massa corpórea (IMC). A concentração de PCR (ELISA ultrassensível), o perfil lipídico e o conteúdo de anticorpos anti-LDLox (ELISA) foram determinados após jejum de 12h. Os grupos foram semelhantes quanto a idade (p = 0,13) e sexo (p = 0,83). Colesterol total, HDL-C, CT/HDL-C e LDL-C/HDL-C apresentaram diferenças significativas entre os grupos Eutrófico e Obeso. Não houve variação significativa no conteúdo de anticorpos anti-LDLox. Os valores de PCR foram diferentes entre os três grupos (p < 0,01). PCR apresentou associação significativa com IMC (β = 2,533), CB (β = 2,645) e CC (β = 2,945), CT (β = 0,006), LDL-C (β = 0,006) e anticorpos anti-LDLox (β = 0,383) e negativa entre HDL-C (β = -0,017). Os resultados indicam que a PCR se associa significativamente com marcadores de risco cardiovascular em adolescentes

Contribution margin model applied to the marketing planning of a container liner carrier

The implementation of confidential contracts between a container liner carrier and its customers, because of the Ocean Shipping Reform Act (OSRA) 1998, demands a revision in the methodology applied in the carrier's planning of marketing and sales. The marketing and sales planning process should be more scientific and with a better use of operational research tools considering the selection of the customers under contracts, the duration of the contracts, the freight, and the container imbalances of these contracts are basic factors for the carrier's yield. This work aims to develop a decision support system based on a linear programming model to generate the business plan for a container liner carrier, maximizing the contribution margin of its freight.

South American spider mites: New hosts and localities

In order to contribute to taxonomic information on Tetranychid mites (Acari: Tetranychidae) in South America, surveys were conducted in Brazil (15 States and the Federal District) and Uruguay (one Department); 550 samples of 120 plant species were collected. Tetranychid mite infestations were confirmed in 204 samples, and 22 species belonging to seven genera of the Bryobiinae and Tetranychinae subfamilies were identified on 58 different host plants. Thirty-six new plant hosts were found in Brazil, South America, and worldwide for the following species: Eutetranychus banksi (McGregor); Mononychellus tanajoa (Bondar); Oligonychus anonae Paschoal; O. mangiferus (Rahman and Sapra); Tetranychus bastosi Tuttle, Baker and Sales; T. desertorum Banks, 1900, T. evansi Baker and Pritchard; T. ludeni Zacher; T. mexicanus (McGregor); T. neocaledonicus Andre; and T. urticae Koch. Four new localities in Brazil were reported for Eotetranychus tremae De Leon; O. anonae; Panonychus ulmi (Koch); and T. gloveri Baker and Pritchard.

Aspectos estratégicos e econômicos da política de bonificação em quantidade de produto

ste trabalho objetiva identificar a percepção dos gestores de controladoria de indústrias sobre os aspectos estratégicos e econômicos da decisão de bonificação em quantidade de produto. A premissa é que os resultados econômicos gerados pela decisão de desconto no preço e de bonificação em quantidade de produto são iguais, considerando a mesma quantidade de produto entregue ao cliente. Com base no banco de dados da FIPECAFI- FEA-USP, analisaram-se 91 questionários encaminhados a controllers atuantes em diversos setores. Os resultados revelam: 1) um número muito significativo de empresas da amostra selecionada adota a bonificação em produtos; 2) a área comercial é a principal responsável por essa decisão; e 3) identificação da percepção dos controllers sobre aspectos decisórios de bonificação em quantidade de produtos.

Endothelial Nitric Oxide Synthase Haplotypes Associated with Hypertension Do Not Predispose to Cardiac Hypertrophy

Left ventricular hypertrophy (LVH) is a complication that may result from chronic hypertension. While nitric oxide (NO) deficiency has been associated with LVH, inconsistent results have been reported with regards to the association of endothelial NO synthase (eNOS) polymorphisms and LVH in hypertensive patients. This study aims to assess whether eNOS haplotypes are associated with LVH in hypertensive patients. This study included 101 healthy controls and 173 hypertensive patients submitted to echocardiography examination. Genotypes for three eNOS polymorphisms were determined: a single-nucleotide polymorphism in the promoter region (T-786C) and in exon 7 (Glu298Asp), and variable number of tandem repeats in intron 4. We found no significant association between eNOS genotypes and hypertension or with LVH (all p>0.05). However, while we found two eNOS haplotypes associated with variable risk of hypertension (all p<0.05), we found no significant associations between eNOS haplotypes and LVH (all p>0.05), even after adjustment in multiple linear regression analysis. These findings suggest that eNOS haplotypes that have been associated with variable susceptibility to hypertension were not associated with LVH in hypertensive patients. Further studies are necessary to examine whether other genes downstream may interact with eNOS polymorphisms and predispose to LVH in hypertensive patients.

A New Species of Riama from Ecuador Previously Referred to as Riama hyposticta (Boulenger, 1902) (Squamata: Gymnophthalmidae)

We describe Riama crypta, new species, from the western slopes of the Cordillera Occidental, Ecuador. This taxon was formerly referred to as Riama hyposticta, a rare species described on the basis of an adult male from northern Ecuador and here recorded from southwestern Colombia. The new species differs principally from Riama hyposticta by an incomplete superciliary series, formed just by the anteriormost superciliary scale (superciliary series complete in R. hyposticta, formed by five or six scales), no nasoloreal suture [= loreal absent] (complete (= loreal present] in R. hyposticta), distinct dorsolateral stripes at least anteriorly (scattered brown spots dorsally without dorsolateral stripes in R. hyposticta), and ventral coloration composed of small cream or brown spots or longitudinal stripes (dark brown with conspicuous transverse white bars and spots). Additionally, we document the presence of distal filiform appendages on the hemipenial lobes of both species.

Sequential production of amylolytic and lipolytic enzymes by bacterium strain isolated from petroleum contaminated soil

Amylases and lipases are highly demanded industrial enzymes in various sectors such as food, pharmaceuticals, textiles, and detergents. Amylases are of ubiquitous occurrence and hold the maximum market share of enzyme sales. Lipases are the most versatile biocatalyst and bring about a range of bioconversion reactions such as hydrolysis, inter-esterification, esterification, alcoholysis, acidolysis, and aminolysis. The objective of this work was to study the feasibility for amylolitic and lipolytic production using a bacterium strain isolated from petroleum contaminated soil in the same submerged fermentation. This was a sequential process based on starch and vegetable oils feedstocks. Run were performed in batchwise using 2% starch supplemented with suitable nutrients and different vegetable oils as a lipase inducers. Fermentation conditions were pH 5.0; 30 degrees C, and stirred speed (200 rpm). Maxima activities for amyloglucosidase and lipase were, respectively, 0.18 and 1,150 U/ml. These results showed a promising methodology to obtain both enzymes using industrial waste resources containing vegetable oils.

Concretes and mortars recycled with water treatment sludge and construction and demolition rubble

There are about 7500 water treatment plants in Brazil. The wastes these plants generate in their decantation tanks and filters are discharged directly into the same brooks and rivers that supply water for treatment. Another serious environmental problem is the unregulated disposal of construction and demolition rubble, which increases the expenditure of public resources by degrading the urban environment and contributing to aggravate flooding and the proliferation of vectors harmful to public health. In this study, an evaluation was made of the possibility of recycling water treatment sludge in construction and demolition waste recycling plants. The axial compressive strength and water absorption of concretes and mortars produced with the exclusive and joint addition of these two types of waste was also determined. The ecoefficiency of this recycling was evaluated by determining the concentration of aluminum in the leached extract resulting from the solubilization of the recycled products. The production of concretes and mortars with the joint addition of water treatment sludge and recycled concrete rubble aggregates proved to be a viable recycling alternative from the standpoint of axial compression strength, modulus of elasticity, water absorption and tensile strength by the Brazilian test method. (C) 2008 Elsevier Ltd. All rights reserved.

Mechanical properties of concrete produced with a composite of water treatment sludge and sawdust

In developing countries such as Brazil, the wastes generated in the decanters and filters of water treatment plants are discharged directly into the same rivers and streams that supply water for treatment. Another environmental problem is the unregulated discard of wood wastes. The lumber and wood products industry generates large quantities of this waste, from logging to the manufacture of the end product. Brazil has few biomass plants and therefore only a minor part of these wastes are reused. This paper presents the results of the first study involving a novel scientific and technological approach to evaluate the possibility of combining these two types of wastes in the production of a light-weight composite for concrete. The concrete produced with cement:sand:composite:water mass ratios of 1:2.5:0.67:0.6 displayed an axial compressive strength of 11.1 MPa, a compressive and diametral tensile strength of 1.2 MPa, water absorption of 8.8%, and a specific mass of 1.847 kg/m(3). The mechanical properties obtained with this concrete render it suitable for application in non-structural elements. (C) 2010 Elsevier Ltd. All rights reserved.

Lightweight composite concrete produced with water treatment sludge and sawdust: Thermal properties and potential application

The main objective of this study was to evaluate the potential application of a lightweight concrete produced with lightweight coarse aggregate made of the water treatment sludge and sawdust (lightweight composite), by determining the thermal properties and possible environmental impact of future residue of this concrete. Two types of concrete were prepared: concrete produced with the lightweight composite dosed with cement/sand/composite/water in a mass ratio of 1:2.5:0.67:0.6 and conventional concrete dosed with cement/sand/crushed stone/water in a mass ratio of 1:4.8:5.8:0.8. The thermal properties were determined by the hot wire parallel technique. The possible environmental impact was measured using the procedures and guidelines of the Brazilian Association of Technical Standards - ABNT. The concrete produced with the lightweight composite presented a 23% lower thermal conductivity than the conventional concrete. The concrete produced with the lightweight composite presented a set of thermal properties suitable for the application of this concrete in non-structural sealing elements. The concentration of aluminum in the solubilized extract of the concrete produced with the lightweight composite was much lower than the concentration of aluminum in the water treatment sludge, confirming the possible reduction of environmental impact of this composite for use in concrete. (C) 2010 Elsevier Ltd. All rights reserved.

Dynamic behavior analysis of drill-threading process when machining AISI Al-Si-Cu(4) alloy

Conventional threading operations involve two distinct machining processes: drilling and threading. Therefore, it is time consuming for the tools must be changed and the workpiece has to be moved to another machine. This paper presents an analysis of the combined process (drilling followed by threading) using a single tool for both operations: the tap-milling tool. Before presenting the methodology used to evaluate this hybrid tool, the ODS (operating deflection shapes) basics is shortly described. ODS and finite element modeling (FEM) were used during this research to optimize the process aiming to achieve higher stable machining conditions and increasing the tool life. Both methods allowed the determination of the natural frequencies and displacements of the machining center and optimize the workpiece fixture system. The results showed that there is an excellent correlation between the dynamic stability of the machining center-tool holder and the tool life, avoiding a tool premature catastrophic failure. Nevertheless, evidence showed that the tool is very sensitive to work conditions. Undoubtedly, the use of ODS and FEM eliminate empiric decisions concerning the optimization of machining conditions and increase drastically the tool life. After the ODS and FEM studies, it was possible to optimize the process and work material fixture system and machine more than 30,000 threaded holes without reaching the tool life limit and catastrophic fail.