Microemulsion-mediated synthesis of cobalt (pure fcc and hexagonal phases) and cobalt-nickel alloy nanoparticles

By choosing appropriate microemulsion systems, hexagonal cobalt (Co) and cobalt-nickel (1:1) alloy nanoparticles have been obtained with cetyltrimethylammonium bromide as a cationic surfactant at 500 degrees C. This method thus stabilizes the hcp cobalt even at sizes (<10 nm) at which normally fcc cobalt is predicted to be stable. On annealing the hcp cobalt nanoparticles in H-2 at 700 degrees C we could transform them to fcc cobalt nanoparticles. Microscopy studies show the formation of spherical nanoparticles of hexagonal and cubic forms of cobalt and Co-Ni (1:1) alloy nanoparticles with the average size of 4, 8 and 20 nm, respectively. Electrochemical studies show that the catalytic property towards oxygen evolution is dependent on the applied voltage. At low voltage (less than 0.65 V) the Co (hexagonal) nanoparticles are superior to the alloy (Co-Ni) nanoparticles while above this voltage the alloy nanoparticles are more efficient catalysts. The nanoparticles of cobalt (hcp and fcc) and alloy (Co-Ni) nanoparticles show ferromagnetism. The saturation magnetization of Co-Ni nanoparticles is reduced compared to the bulk possibly due to surface oxidation.

Spectral analysis of pair-correlation bandwidth: Application to cell biology images

Images from cell biology experiments often indicate the presence of cell clustering, which can provide insight into the mechanisms driving the collective cell behaviour. Pair-correlation functions provide quantitative information about the presence, or absence, of clustering in a spatial distribution of cells. This is because the pair-correlation function describes the ratio of the abundance of pairs of cells, separated by a particular distance, relative to a randomly distributed reference population. Pair-correlation functions are often presented as a kernel density estimate where the frequency of pairs of objects are grouped using a particular bandwidth (or bin width), Δ>0. The choice of bandwidth has a dramatic impact: choosing Δ too large produces a pair-correlation function that contains insufficient information, whereas choosing Δ too small produces a pair-correlation signal dominated by fluctuations. Presently, there is little guidance available regarding how to make an objective choice of Δ. We present a new technique to choose Δ by analysing the power spectrum of the discrete Fourier transform of the pair-correlation function. Using synthetic simulation data, we confirm that our approach allows us to objectively choose Δ such that the appropriately binned pair-correlation function captures known features in uniform and clustered synthetic images. We also apply our technique to images from two different cell biology assays. The first assay corresponds to an approximately uniform distribution of cells, while the second assay involves a time series of images of a cell population which forms aggregates over time. The appropriately binned pair-correlation function allows us to make quantitative inferences about the average aggregate size, as well as quantifying how the average aggregate size changes with time.

Yhteinen käsityö peruskoulun 7. luokalla : Opettajien kokemuksia yhteisen käsityön opetuksesta ja organisoinnista

Finnish education politics presume that basic education should be equal to all students. While organising craft education equality can be understood as similarity or as possibility to choose. The possibility to be able to choose whether textile or technical craft despite of one´s gender has been the aim of laws and curriculums already over 30 years. In practice it´s almost impossible to students to ignore feminine and masculine roles that go deep into our culture. Choosing craft has been divided by gender, which is the reason why possibility to choose has not been good enough to educationalists of equality. The latest guidelines for the National core curriculum for bacis education were issued in 2004. According to curriculum craft education consists parts of both technical and textile craft. All students should take part in both sectors of crafts. Furthermore, one can be given a possibility to consentrate his studies in whether textile or technical craft. The curriculum does not set the rules how the education should be organised, which means that it can be organised in many ways depending on city, school or teacher. Teachers and other specialists have contradictory feelings towards shared craft education, because traditional way to see craft in Finland is to separate textile craft from technical craft. Both crafts have some common features that are introduced in curriculum. Besides there is many equal things in craft theories that bind textile and technical craft to each other. The main purpose of this research was to find out, how shared craft education has been organised at the 7.th grade in Finnish comprehensive school, and which things affect in the settlements. Second goal was to describe and compare teachers´ experiences in teaching shared craft education. Third aim of this study was how shared craft has changed craft education. I collected the research material in May 2006 by interviewing both textile and technical craft teachers who teach shared craft. The material consists of fourteen theme interviews. In the analysis of the material I used theoretic bounded document analysis. According to the research there are three different ways to organise shared craft education: 50 50-arrangement, exchanging period and project week. In the schools that carried out 50 50-arrangement teaching was realised mainly in heterogenous groups. Principals had usual a lot of authorization on how to arrange craft education, which means that their views on equality, laws and curriculum affected in the settlemets more than teachers´ opinions. Teachers´ attitudes to shared craft were mainly positive. The changing of craft education can be divided in two parts: the aims and the containings of the curriculum have changed, as well as the meaning of the craft as core subject. Teachers have been forced to decrease the containings of both textile and technical crafts. Despite of eliminations both crafts still have comprehensive containings. Teachers decided what to teach by these argumets: Students should learn some basic things or produce a certain product. Usually teachers had also a lot of experience and special intrests in crafts. According to this research there is four significant meanings for shared craft education: 1) developing readiness for doing things, 2) developing skills of thinking, 3) delight of doing things and 4) teaching attitude.

Tekstiilikulttuurisen lukutaidon edistäminen museoissa

Purpose: The study focuses on the question, how to advance textile cultural interpretation skills in museum. The theme was actual, because there have been many workshops in different kind of museums, which have raised textile into important role of their museum pedagogy. The knowing of nature of textile materials was highlighted in former studies as the most crucial thing in craft. That is reason for choosing textile to study. The theoretical approach of study was particularized to the meanings which have been given to craft during recent ten years. Furthermore the composition of textile culture and transmitting textile cultural heritage were examined throug the theory. The finnish museum as a place for learning, as well as the contens of museum pedagogy, were analyzed. The fundamental approach to study was cultural research and art education. Methods: The methodological approach was theory-based theme interview. Before interviewing informants the charting was made by using literature, interviews and observation, to find out the most important themes within subject. Specialists were interviewed personally and results were sent to them by e-mail for further comments. There were 8 informants and they were chosen with intentional sampling from different kind of museums, from teacher education and among craft teachers. Research material was analyzed with content analysis by using deductive reasoning. Conclusions: The study revealed that there are three strategies in advancing textile cultural interpretation. The most remarkable strategies are 1) making acquaintance of materials and working with them, 2) getting exiting events with posibilities to use one s whole body and 3) getting textile cultural knowledge by using for example discovery - style learning. In practice those strategies were mixed, which also was considered advisable. Another conclusion the study revealed, is the desirable, acceptable attitude not only to the craft with creative, free beginning but also to the craft made like its model in museum. Learning from model can be felt as a very moving experience, like a journey in time. The side result of the study was the importance of collaboration of museums and schools in advancing textile cultural interpretation skills as well as significance of using internet in collaboration and relations.

Modeling dynamic demand response using Monte Carlo simulation and interval mathematics for boundary estimation

With the rapid development of various technologies and applications in smart grid implementation, demand response has attracted growing research interests because of its potentials in enhancing power grid reliability with reduced system operation costs. This paper presents a new demand response model with elastic economic dispatch in a locational marginal pricing market. It models system economic dispatch as a feedback control process, and introduces a flexible and adjustable load cost as a controlled signal to adjust demand response. Compared with the conventional “one time use” static load dispatch model, this dynamic feedback demand response model may adjust the load to a desired level in a finite number of time steps and a proof of convergence is provided. In addition, Monte Carlo simulation and boundary calculation using interval mathematics are applied for describing uncertainty of end-user's response to an independent system operator's expected dispatch. A numerical analysis based on the modified Pennsylvania-Jersey-Maryland power pool five-bus system is introduced for simulation and the results verify the effectiveness of the proposed model. System operators may use the proposed model to obtain insights in demand response processes for their decision-making regarding system load levels and operation conditions.

Real-time wide-area loading margin sensitivity (WALMS) in power systems

Loading margin sensitivity (LMS) has been widely used in applications in the realm of voltage stability assessment and control. Typically, LMS is derived based on system equilibrium equations near bifurcation and therefore requires full detailed system model and significant computation effort. Availability of phasor measurement units (PMUs) due to the recent development of wide-area monitoring system (WAMS) provides an alternative computation-friendly approach for calculating LMS. With such motivation, this work proposes measurement-based wide-area loading margin sensitivity (WALMS) in bulk power systems. The proposed sensitivity, with its simplicity, has great potential to be embedded in real-time applications. Moreover, the calculation of the WALMS is not limited to low voltage near bifurcation point. A case study on IEEE 39-bus system verifies the proposed sensitivity. Finally, a voltage control scenario demonstrates the potential application of the WALMS.

Competition of sorghum cultivars and densities with Japanese millet (Echinochloa esculenta).

Field studies were conducted at two locations in southern Queensland, Australia during the 2003-2004 and 2004-2005 growing seasons to determine the differential competitiveness of sorghum (Sorghum bicolor L. Moench) cultivars and crop densities against weeds and the sorghum yield loss due to weeds. Weed competition was investigated by growing sorghum in the presence or absence of a model grass weed, Japanese millet (Echinochloa esculenta). The correlation analyses showed that the early growth traits (height, shoot biomass, and daily growth rate of the shoot biomass) of sorghum adversely affected the height, biomass, and seed production of millet, as measured at maturity. "MR Goldrush" and "Bonus MR" were the most competitive cultivars, resulting in reduced weed biomass, weed density, and weed seed production. The density of sorghum also had a significant effect on the crop's ability to compete with millet. When compared to the density of 4.5 plants per m2, sorghum that was planted at 7.5 plants per m2 suppressed the density, biomass, and seed production of millet by 22%, 27% and 38%, respectively. Millet caused a significant yield loss in comparison with the weed-free plots. The combined weed-suppressive effects of the competitive cultivars, such as MR Goldrush, and high crop densities minimized the yield losses from the weeds. These results indicate that sorghum competition against grass weeds can be improved by choosing competitive cultivars and by using a high crop density of > 7.5 plants per m2. These non-chemical options should be included in an integrated weed management program for better weed management, particularly where the control options are limited by the evolution of herbicide resistance.

Discovering urban citizenship in the surveillance society

Cities and urban spaces around the world are changing rapidly from their origins in the industrialising world to a post-industrial, hard wired landscape. A further embellishment is the advent of mobile media technologies supported by both existing and new communications and computing technology which claim to put the urban dweller at the heart of a new, informed and ‘liberated’ seat of participatory urban governance. This networked, sensor enabled society permits flows of information in a multitude of directions ostensibly empowering the citizenry through ‘smart’ installations such as ‘talking bus stops’ detailing services, delays, transport interconnections and even weather conditions along desired routes. However, while there is considerable potential for creative and transformative kinds of citizen participation, there is also the momentum for ‘function-creep’, whereby vast amounts of data are garnered in a broad application of urban surveillance. This kind of monitoring and capacity for surveillance connects with attempts by civic authorities to regulate, restrict, rebrand and reframe urban public spaces into governable and predictable arenas of consumption. This article considers questions around the possibilities for retaining and revitalising forms of urban citizenship, set in the context of Marshall’s original premise of civil, social and political citizenship(s) in the middle of the last century, following World War Two and the coming of the modern welfare state.

Freedom ride... I have a dream

A play in two parts on the subject of racism. Part One presents the story of the Montgomery bus boycott arising from the refusal of Rosa Parkes to give up her seat on a bus and leading to the rise of Martin Luther King, Jr. Part Two is set in contemporary Australia, in the household of a group of young people who re-create the sixties' Freedom Ride in order to heal the spirit of Auntie, an Aboriginal woman, who is the centre of their world.

Quantifying differences between treated and untreated coir substrate

The aim of this project was to quantify differences between treated and untreated coir (coconut industrial residues) products and to identify differences in growth, yield and quality of cut flowers grown in different coir products. This has been brought about largely by the concern that some coir products, washed in low quality (saline) water may have detrimental effects on plant productivity and quality. There is concern in the flower production industry and among media suppliers, that lower quality products are favoured due to price alone, which as this project shows is a false economy. Specifically the project examined: • Differences in physical and chemical properties of treated and untreated coir along with another commonly used growing media in the flower industy; • Potential improvements in yield and quality of Gerbera (Gerbera jamesonii); • Potential differences in vase life of Gerbera as a result of the different growing media; and • Cost-benefit implications of treated (more expensive) coir substrate products versus untreated (less expensive) coir including any subsequent differences in yield and quality. By first examining the physical and some chemical properties of different coir substrates and other industry standard media, the researchers have been able to validate the concerns raised about the potential quality issues in coir based growing media. There was a great deal of variation in both the electrical conductivity and sodium contents. Physical properties were also variable as expected since manufacturers are able to target the specific physical preferences of plants through manipulation of the particle size distribution. A field trial was conducted under protected cropping practices in which three growing media were compared in terms of total productivity and also flower quality parameters such as stem length, flower diameter and vase life. The trial was a completely randomised design with the three growing media comprising treated coir discs, untreated coir discs and a pine bark coir mix. Four cultivars of Gerbera were assessed: Balance®; Carambole®; Dune® and Picobello®, all new products from Florist de Kwakel B.V., Denmark. Initial expansion from tissue culture was conducted at the Highsun Express Facility, Ormiston, Queensland. The trial included 12 replications of each cultivar in each media (a total of 144 plants) to ensure all data collected, and the derived conclusions were statistically rigorous. The coir supplied with no pre-treatment or buffering produced significantly less flowers than those grown in a pine bark coir mix or the pre-treated coir. Interestingly, the pine bark coir mix produced a greater number of flowers. However, the flowers produced in the pine bark coir mix were generally a shorter length stem. Productivity data, combined with flower quality data and component costs were all analysed through a cost/benefit economic model which showed that the greater revenue from better stem length outweighed the stem numbers, giving a cost benefit ratio of 2.58 for treated coir, 2.49 for untreated coir and 2.52 for pine bark coir mix. While this does not seem a large difference, when considering the number of plants a producer maintains can be upwards of 50,000 the difference in revenue would be, at a minimum $60,000 in this example. In conclusion, this project has found that there are significant effects on plant health, growth, yield and quality between those grown in treated and untreated coir. The outcome being growers can confidently invest in more expensive treated products with the assurance that benefits will outweigh initial cost. It is false economy to favour untreated coir products based on price alone. Producers should ensure they fully understand the production processes when purchasing growing media. Rather than targeting lower priced materials, it is recommended that quality be the highest priority in making this management decision. In making recommendations for future research and development it was important to consider conclusions from other researchers as well as those of the current project. It has been suggested that the media has greater longevity, which although not captured in this study could also lead to further cost efficiencies. Assessment of the products over a longer time period, and using a wider range of plant species are the major recommendations for further research to ensure greater understanding as to the importance in choosing the right growing media to meet specific needs.

Robustness of the partitions in grouping multi-item inventories

A recent work obtained closed-form solutions to the.problem of optimally grouping a multi-item inventory into subgroups with a common order cycle per group, when the distribution by value of the inventory could be described by a Pareto function. This paper studies the sensitivity of the optimal subgroup boundaries so obtained. Closed-form expressions have been developed to find intervals for the subgroup boundaries for any given level of suboptimality. Graphs have been provided to aid the user in selecting a cost-effective level of aggregation and choosing appropriate subgroup boundaries for a whole range of inventory distributions. The results of sensitivity analyses demonstrate the availability of flexibility in the partition boundaries and the cost-effectiveness of any stock control system through three groups, and thus also provide a theoretical support to the intuitive ABC system of classifying the items.

Pharmacists' role in lung health

Breathing is important. In fact, most people take on average 23,000 breaths each day. However, most of us probably take this for granted and do not notice these breaths – unless of course maybe when we are exercising, or huffing and puffing because we are running late for the bus...

Simple period timing device for laser Doppler signals

A period timing device suitable for processing laser Doppler anemometer signals has been described here. The important features of this instrument are: it is inexpensive, simple to operate, and easy to fabricate. When the concentration of scattering particles is low the Doppler signal is in the form of a burst and the Doppler frequency is measured by timing the zero crossings of the signal. But the presence of noise calls for the use of validation criterion, and a 5–8 cycles comparison has been used in this instrument. Validation criterion requires the differential count between the 5 and 8 cycles to be multiplied by predetermined numbers that prescribe the accuracy of measurement. By choosing these numbers to be binary numbers, much simplification in circuit design has been accomplished since this permits the use of shift registers for multiplication. Validation accuracies of 1.6%, 3.2%, 6.3%, and 12.5% are possible with this device. The design presented here is for a 16-bit processor and uses TTL components. By substituting Schottky barrier TTLs the clock frequency can be increased from about 10 to 30 MHz resulting in an extension in the range of the instrument. Review of Scientific Instruments is copyrighted by The American Institute of Physics.

Objective `Safe' Grazing Capacities for South-West Queensland Australia: Model Application and Evaluation

This paper describes the employment of two experienced graziers as consultants to apply and evaluate a model for calculating 'safe' long-term grazing capacities of individual properties. The model was based on ecological principles and entailed estimates of average annual forage grown (kglha) on the different land systems on each property and the calculation of the number of livestock (dry sheep equivalents, DSE) required to 'safely' utilise this forage. The grazier consultants applied and evaluated the 'safe' grazing capacity model on 20 properties of their choosing. For evaluation, model results were compared with; (a) the Department of Lands rated carrying capacities for those properties and (b) the grazing capacity assessed independently by the owners of those properties. For the 20 properties, the average 'safe' grazing capacity calculated by the model (21.0 DSE/kmZ) was 8% lighter than the average of the owner assessed capacities (22.7 DSE/kmZ), which in tum was 37% lighter than the average of the pre-1989 Department of Lands rated carrying capacity (31.0 DSE/kmZ). The grazing land management and administrative implications of these results and the role graziers played as consultants are discussed.

Measuring route passenger load diversity for capacity and quality of service assessment

This paper develops theory that quantifies transit route passenger-relative load factor and distinguishes it from occupancy load factor. The ratio between these measures is defined as the load diversity coefficient, which as a single measure characterizes the diversity of passenger load factor between route segments according to the origin-destination profile. The relationship between load diversity coefficient and route coefficient of variation in occupancy load factor is quantified. Two tables are provided that enhance passenger capacity and quality of service (QoS) assessment regarding onboard passenger load. The first expresses the transit operator’s perspective of load diversity and the passengers’ perspective of load factor relative to the operator’s, across six service levels corresponding to ranges of coefficient of variation in occupancy load factor. The second interprets the relationships between passenger average travel time and each of passenger-relative load factor and occupancy load factor. The application of this methodology is illustrated using a case study of a premium radial bus route in Brisbane, Australia. The methodology can assist in benchmarking and decision making regarding route and schedule design. Future research will apply value of time to QoS measurement, reflecting perceived passenger comfort through crowding and average time spent aboard. This would also assist in transit service quality econometric modeling.