1000 resultados para Cafè – Indústria i comerç – Equador
Resumo:
The electrical ceramic insulators industry, uses noble raw materials such as siliceous and aluminous clays of white burning, in order to provide plasticity of the mass and contribute to electrical and mechanical properties required of the product, and feldspar with the flux function In literature references the composition of the masses indicates that the clay participates in percentage between 20 and 32, and feldspar 8 to 35, these materials have significant cost. In this research was performed the total replacement of commercial clay, for white burning clay from Santa Luzia region in southern Bahia and partial replacement of feldspar by ash residue of husk conilon coffee burning, from extreme south of Bahia. The objective of replacement these raw materials is to aver its technical feasibility and call attention for the embryo pole of ceramic industry for the existing in the south and extreme south of Bahia, which has significant reserves of noble raw materials such as clay white burning, kaolin, quartz and feldspar, and generates significant volume of gray husk conilon coffee as alternate flux. Clay Santa Luzia is prima noble material whose current commercial application is the production of white roofing. The residue of coffee husk ash is discarded near of production sites and is harmful to the environment. Phase diagrams and statistic design of experiments, were used for optimization and cost savings in research. The results confirmed the expectations of obtaining electrical ceramic insulators, with white burning clay of Santa Luzia and partial replacement up to 35.4% of feldspar, by treaty residue of conilon ash coffee husk burning. The statistic design that showed best results was for formulation with percentages of: clay 26.4 to 30.4%; kaolin 14.85 to 17.1%; feldspar 12.92 to 16.96%; R2 residue 7.08 to 9.2% and Quartz 32.5 to 38.75%, relative to the total mass of the mixture. The best results indicated; 0.2 to 1.4% apparent porosity , water absorption 0.1 to 0.7%, flexural strength 35 to 45MPa , dielectric strength 35-41 kV/cm , the transverse resistivity 8x109 2.5x1010 Ω.cm and for the dielectric constant ε/ε0 7 to 10.4, specification parameters for manufacturing ceramic electrical insulators of low and medium voltage.
Resumo:
O azoto é determinante na produtividade e na qualidade da batata para indústria. Com este trabalho pretendeu-se avaliar o efeito de diferentes doses de azoto na variedade de batata “Hermes”, em plena condições de cultivo do Vale do Tejo. Os tratamentos consistiram na aplicação de 0 (N0), 80 (N80), 160 (N160), 240 (N240) e 320 (N320) kg de azoto/ha, na forma de ENTECÒ 26. O ensaio foi instalado em parcelas totalmente aleatórias, com 4 repetições. Foi registado semanal a taxa de cobertura de solo pelo método da grelha até à sua cobertura total. Bissemanalmente, foram recolhidas plantas nos tratamentos N0 (0kgN/ha) e N160 (160kgN/ha) para avaliação do seu desenvolvimento e crescimento. No final do ciclo cultural avaliou-se a produção total, comercial, em peso e número de tubérculos. Avaliou-se ainda o peso específico, os teores em matéria seca dos tubérculos e a percentagem do azoto total na matéria seca das folhas e tubérculos. A adubação azotada influenciou a dimensão do aparelho fotossintético, através do estímulo de ramificações. Verificou-se uma maior produtividade de tubérculos nos tratamentos com maior aplicação de azoto, embora os acréscimos tenham sido menores a partir dos 160kg/ha. O azoto influenciou a percentagem de tubérculos de maior calibre.
Resumo:
Partiendo del concepto de metáfora cognitiva, que complementa al más conocido de metáfora literaria, y analizando la base conceptual que a ambas subyace, pretendemos un cuidadoso análisis de los textos de poesía épica y lírica arcaicas, sin olvidar la importancia fundamental del contexto cultural en que estos surgen, para obtener una mejor comprensión de la forma en que los griegos conceptualizaban el sentimiento amoroso.
Resumo:
Introdução: A neurofibromatose tipo I (NF1), também designada doença de Von Recklinghausen, é causada por uma anormalidade no cromossoma 17, de transmissão autossómica dominante, responsável pela produção deficiente de neurofibromina. Caracteriza-se por displasia nos tecidos mesodérmicos e neuroectodérmicos, e tem uma incidência de um para 2.500-3.300 nascimentos. A presença de manchas café-au-lait, neurofibromas cutâneos e hamartomas da íris são sinais cardinais da doença. Primeiramente descrita por Ruebi em 1945, a patologia vascular é uma complicação subestimada e pouco reconhecida na NF1. A ocorrência de hemorragia fatal ou quase fatal está reportada ocasionalmente nas cavidades pleural, abdominal, retroperitoneu, tecidos moles do tronco e extremidades. Esta hemorragia massiva é causada pela rutura de vasos sanguíneos friáveis, característicos pelos níveis reduzidos de neurofibromina e consequente proliferação endotelial e de músculo liso nas artérias e veias. Uma das consequências clínicas mais sérias descritas na NF1 é a ocorrência de hemorragia severa e dificuldade em alcançar controlo hemostático. Objetivo: Exposição de caso clínico de extenso hematoma cervical e hemotórax espontâneos por rutura troncos venosos braquiocefálico, veia subclávia e junção subclávio-jugular em doente com NF1. Caso clínico: Relata-se caso clínico de mulher de 51 anos, com antecedentes conhecidos de NF1 e hipertensão arterial. Foi admitida no serviço de urgência em choque hipovolémico hemorrágico, no contexto de dor súbita no ombro direito e volumosa tumefação cervical direita. Em angioTC foi objetivado volumoso hematoma, envolvendo a região cervical direita, a região retrofaríngea-prevertebral, escavado supraclavicular direito, mediastino, associando a importante hemotórax direito. Procedeu-se a abordagem supraclavicular com drenagem do hematoma e identificação de fontes hemorrágicas, nomeadamente: tronco venoso braquicefálico, veia subclávia e confluência subclávio-jugular. Foi necessária secção da clavícula para controlo hemorrágico e realização de rafias dos troncos venosos com prolene. Intraoperatoriamente, foi evidente a fragilidade e friabilidade excessiva dos vasos sanguíneos. Após controlo hemorrágico, foi realizada videotoracoscopia para drenagem de hemotórax e evacuação de coágulos, confirmando-se a ausência de hemorragia ativa. No pós-operatório a doente recuperou estabilidade hemodinâmica, sem evidência analítica de queda de hemoglobina. Realizou-se angioTC, onde se confirmou franca melhoria do hematoma cervical direito e retrofaríngeo em critérios quantitativos, e ausência de extravasamento de contraste. Objetivou-se adicionalmente aneurismas acular da artéria vertebral direita, corrigido ulteriormente através de embolização com coils. Conclusão: A NF1 é uma doença genética que raramente se pode associar a hemorragia life- -threatening. A vasculopatia é uma complicação subestimada e pouco reconhecida na NF1. A existência de friabilidade vascular excessiva com consequente hemorragia espontânea na NF1 é rara e pode ser fatal, exigindo um diagnóstico rápido e tratamento atempado.
Resumo:
The transformations economical, cultural and social that happen in world ambit they are associated to the intense progress and expansion of new technologies, forcing governments, people, companies and nations to the introduction of new patterns of behavior, forcing, in that way, to the continuous renewal of products and technological processes to maintain the competitiveness, so much among nations, as in the managerial world. In that matter, the technological innovation is recognized as basic factor of maintainable economical competitiveness, being the responsible for the breaking and/or improvement of the techniques and production processes, what presupposes the systematization varied institutional arrangements that they involve firms, interaction nets among companies, government agencies, universities, research institutes, laboratories of companies and scientists and engineers activities. Those arrangements, to the if they articulate with the educational system, with the industrial and managerial section and, also, with the financial institutions, they take the form that Freeman (1987) it coined of national system of innovation, promoted through public politics of CT&I, which seek to induce and to support innovative initiatives in the companies, as well as to establish demands and to prioritize vocations and regional potentialities. In that context of government support to the technological innovation interferes this study, that it looked for to know the reasons of the fragility innovative in the pharmaceutical industry of State of Pará in Brazil, pointed for PINTEC (2005), starting from the point of view of the businessmen of that section. For such, the qualitative approach was used - with interviews directing semi and the technique of the content analysis. The results of the research pointed that the fragilities innovative of the section links to the ignorance of the government support to the technological innovation on the part of the businessmen of the pharmaceutical industry of State of Pará in Brazil
Resumo:
In the industrial production of soluble coffee, huge amounts of extracted coffee residues are generated; onaverage, for eachtonne of green coffee extracted, 480 kg of coffee ground waste is produced. This is a solid residue currently used to generate energy at the steam boilers from the soluble coffee industry. Some is also used or as fertilizer on agriculture fields. Seeking a better end use, the work reported here aimed to study the viability of hydrolyzing the coffee ground residue for the production of carbohydrates. Hydrolysis was undertaken with hydrochloric acid at different temperatures and pressures, using a water bath or autoclave.An enzymatic hydrolysis with Viscozyme Lwas developed using Whatman filter paper No1 and the optimal conditions were determined using a rotational central composite experimental design (DCCR).The best conditions to hydrolyze filter paper cellulose were 50 FBG (Fungal β-glucanase) of Viscozyme L at pH 4.0 for 1.0 h and 45 ºC. The ground coffee was hydrolyzed under the same conditions as described above for filter paper, however this enzymatic hydrolysis was not efficient. A combination of enzymatic hydrolysis as a pre-treatment for the ground coffee followed by acid hydrolysis using HCl conducted in an autoclave (120 C for 2.0 h) resulted in higher production of glucose as analyzed by HPLC. Another end use of the ground coffee evaluated was as source of substrate in the culture medium to grow Botryosphaeria rhodina MAMB-05 to produce the enzymes laccase and cellulase. Highest enzyme titres obtained were with 8% (w/v) coffee grounds to which was added a minimum salts medium(Vogel), under agitation conditions (180 rpm) at 28ºC. The phenolic compounds present in the coffee grounds appear to have induced laccase by Botryosphaeria rhodina.
Resumo:
O azoto é determinante na produtividade e na qualidade da batata para indústria. Com este trabalho pretendeu-se avaliar o efeito de diferentes doses de azoto na variedade de batata “Hermes”, em plena condições de cultivo do Vale do Tejo. Os tratamentos consistiram na aplicação de 0 (N0), 80 (N80), 160 (N160), 240 (N240) e 320 (N320) kg de azoto/ha, na forma de ENTECÒ 26. O ensaio foi instalado em parcelas totalmente aleatórias, com 4 repetições. Foi registado semanal a taxa de cobertura de solo pelo método da grelha até à sua cobertura total. Bissemanalmente, foram recolhidas plantas nos tratamentos N0 (0kgN/ha) e N160 (160kgN/ha) para avaliação do seu desenvolvimento e crescimento. No final do ciclo cultural avaliou-se a produção total, comercial, em peso e número de tubérculos. Avaliou-se ainda o peso específico, os teores em matéria seca dos tubérculos e a percentagem do azoto total na matéria seca das folhas e tubérculos. A adubação azotada influenciou a dimensão do aparelho fotossintético, através do estímulo de ramificações. Verificou-se uma maior produtividade de tubérculos nos tratamentos com maior aplicação de azoto, embora os acréscimos tenham sido menores a partir dos 160kg/ha. O azoto influenciou a percentagem de tubérculos de maior calibre.
Resumo:
Introdução: Os consumidores estão cada vez mais exigentes e conscientes do impacto na saúde do consumo de determinados alimentos. O estilo de vida das famílias tem sofrido alterações profundas, traduzindo-se essencialmente na falta de tempo para preparar as refeições. Por esse motivo, recorrem cada vez mais à aquisição de alimentos confecionados ou pré-confecionados. Objetivos: Determinar os teores totais de sal e de gordura de refeições prontas a comer, e avaliar os benefícios/riscos para a saúde da população Portuguesa, tendo por base as recomendações de referência e o consumo destes produtos. Métodos: Foram adquiridas, em 2015, em grandes superfícies da região de Lisboa, 24 refeições prontas a comer, sendo 12 fornecidas por cadeias de fast-food. O teor de sal foi determinado utilizando o método de Charpentier-Volhard. O teor de gordura total foi determinado pelo método de hidrólise ácida, seguido de extração em Soxhlet com éter de petróleo. Os valores obtidos foram comparados com os valores de referência do Regulamento (UE) N.º 1169/2011 e com as orientações da Organização Mundial de Saúde. Resultados: O teor de gordura total das refeições analisadas variou entre 9,70 g/porção (dobrada com feijão branco) e 69,3 g/porção (hambúrguer de carne de vaca com batata frita). Em 75% das refeições analisadas o teor de sal foi superior a 2,5 g/porção, representando mais de 50% da dose diária de referência para o consumo de sal. De uma forma geral, o teor de sal era inferior nas refeições de fast-food comparativamente às outras refeições analisadas. Conclusões: Grande parte das refeições analisadas apresenta um elevado teor de gordura e de sal. Parece recomendável a sua reformulação, no sentido de se tornarem produtos mais saudáveis, promovendo a saúde pública. Num futuro próximo, pretende-se alargar este trabalho de investigação a um maior número de refeições.
Resumo:
The transformations economical, cultural and social that happen in world ambit they are associated to the intense progress and expansion of new technologies, forcing governments, people, companies and nations to the introduction of new patterns of behavior, forcing, in that way, to the continuous renewal of products and technological processes to maintain the competitiveness, so much among nations, as in the managerial world. In that matter, the technological innovation is recognized as basic factor of maintainable economical competitiveness, being the responsible for the breaking and/or improvement of the techniques and production processes, what presupposes the systematization varied institutional arrangements that they involve firms, interaction nets among companies, government agencies, universities, research institutes, laboratories of companies and scientists and engineers activities. Those arrangements, to the if they articulate with the educational system, with the industrial and managerial section and, also, with the financial institutions, they take the form that Freeman (1987) it coined of national system of innovation, promoted through public politics of CT&I, which seek to induce and to support innovative initiatives in the companies, as well as to establish demands and to prioritize vocations and regional potentialities. In that context of government support to the technological innovation interferes this study, that it looked for to know the reasons of the fragility innovative in the pharmaceutical industry of State of Pará in Brazil, pointed for PINTEC (2005), starting from the point of view of the businessmen of that section. For such, the qualitative approach was used - with interviews directing semi and the technique of the content analysis. The results of the research pointed that the fragilities innovative of the section links to the ignorance of the government support to the technological innovation on the part of the businessmen of the pharmaceutical industry of State of Pará in Brazil
Resumo:
Diante da atual crise ambiental e econômica enfrentada pela agricultura moderna, o presente trabalho teve como objetivos analisar a produtividade, os aspectos econômicos e ambientais de um sistema agroflorestal conduzido em Machado, sul de Minas Gerais há onze anos, tendo como principais produtos o café (Coffea arabica) orgânico certificado pela BCS, que é exportado para outros países, a banana e o eucalipto, que também possuem certificação orgânica e são vendidos no comércio local. A metodologia da pesquisa foi baseada no DRP (Diagnóstico Rural Participativo). Ao contrário dos sistemas convencionais de produção, o sistema agroflorestal estudado evidenciou a viabilidade do modelo de produção nas dimensões produtiva, ecológica e econômica. A baixa produtividade do café no sistema agroflorestal é compensada pela venda do café no mercado internacional, pela produção e comercialização da banana, do eucalipto e obtenção de uma diversidade de alimentos saudáveis para a subsistência das famílias.
Resumo:
Doutoramento em Ciências Empresariais.
Resumo:
To produce porcelain tiles fluxing agents are used in order to obtain a liquid phase during firing. This liquid phase fills the pores decreasing porosity, water absorption and contributes to material densification. In the porcelain tiles industry, feldspar is the main flux material used, with quantities ranging between 35 and 50%. Studies focus on the discovery of materials with flux characteristics that can reduce the consumption of feldspar by porcelain tiles industry. In this context, the coffee husk ashes, a residue obtained when coffee husks are burned to produce heat for the dryers during the processing of the green fruit, have as main chemical constituents potassium, calcium and magnesium, giving them characteristics of fluxing material. Brazil is the largest coffee producer in the world and is responsible for over 30% of the world s production. In this work a physical treatment of coffee husk ash was carried out in order to eliminate the organic matter and, after this, two by-products were obtained: residual wastes R1 and R2. Both residues were added separately as single fluxes and also in association with feldspar in mixtures with raw materials collected in a porcelain industry located in Dias d Ávila-Ba. The addition of these residues aimed to contribute to the reduction of the consumption of feldspar in the production of porcelain tiles. Specimens were produced with dimensions of 60 mm x 20 mm x 6 mm in an uniaxial die with compacting pressure of 45 MPa. The samples were heated to a temperature of 1200 °C, for 8 minutes. Tests were performed to characterize the raw materials by XRF, XRD, particle size analysis, DTA and TGA and, additionally, the results of the physical properties of water absorption, apparent porosity, linear shrinkage, density, dilatometry, flexural strength and SEM of sintered body were analyzed. Additions of less than 8% of the residue R1 contributed to the decrease of porosity, but the mechanical strength of the samples was not satisfactory. Additions of 5% the R2 residue contributed significantly to decrease the water absorption and apparent porosity, and also to increase the mechanical strength. Samples with addition of feldspar associated with the R2 residue, in proportions of 6.7% of R2 and 6.7% of feldspar, led to results of water absorption of 0.12% and mechanical strength of 46 MPa, having parameters normalized to the manufacture of porcelain stoneware tiles
Resumo:
This work presents the results of a survey in oil-producing region of the Macau City, northern coast of Rio Grande do Norte. All work was performed under the Project for Monitoring Environmental Change and the Influence of Hydrodynamic forcing on Morphology Beach Grass Fields, Serra Potiguar in Macau, with the support of the Laboratory of Geoprocessing, linked to PRH22 - Training Program in Geology Geophysics and Information Technology Oil and Gas - Department of Geology/CCET/UFRN and the Post-Graduation in Science and Engineering Oil/PPGCEP/UFRN. Within the economic-ecological context, this paper assesses the importance of mangrove ecosystem in the region of Macau and its surroundings as well as in the following investigative exploration of potential areas for projects involving reforestation and / or Environmental Restoration. At first it was confirmed the ecological potential of mangrove forests, with primary functions: (i) protection and stabilization of the shoreline, (ii) nursery of marine life, and (iii) source of organic matter to aquatic ecosystems, (iv) refuge of species, among others. In the second phase, using Landsat imagery and techniques of Digital Image Processing (DIP), I came across about 18,000 acres of land that can be worked on environmental projects, being inserted in the rules signed the Kyoto Protocol to the market carbon. The results also revealed a total area of 14,723.75 hectares of activity of shrimp production and salting that can be harnessed for the social, economic and environmental potential of the region, considering that over 60% of this area, ie, 8,800 acres, may be used in the planting of the genus Avicennia considered by the literature that the species best sequesters atmospheric carbon, reaching a mean value of 59.79 tons / ha of mangrove
Resumo:
2015
Resumo:
2015