Scale architecture of the palmar and plantar epidermis of Polychrus acutirostris Spix, 1825 (Iguania, Polychrotidae) and its relationship to arboreal locomotion

In tetrapod squamates, the diversity of micro-ornamentations of the epidermis of the contact areas of hands and feet is generally associated with constraints and modalities related to locomotion. Polychrus acutirostris is a medium-sized lizard that occurs in open heterogeneous habitats in South America, such as the cerrados, caatingas, and fallow lands. It progresses slowly on branches of various diameters in its arboreal environment. It can also move more rapidly on the ground. The hands and feet are prehensile and may be considered an adaptation for grasping and climbing. Epidermal surfaces from the palmar and plantar areas of the hands and feet of P. acutirostris were prepared for SEM examination, and studied at various magnifications. They show three major levels of complexity: (1) scale types, organized in gradients of size and imbrication, (2) scalar ornamentations, organized by increasing complexity and polarity, and (3) presence of Oberhautchen showing typically iguanian honeycomb micro-ornamentations. The shape and surface structure of the scales with their pattern of micro-ornamental peaks, which improve grip, and the grasping hands and feet indicate that P. acutirostris is morpho-functionally specialized for arboreality. (C) 2009 Elsevier GmbH. All rights reserved.

Mitochondrial sequence data and Dipsacales phylogeny: Mixed models, partitioned Bayesian analyses, and model selection

Phylogenetic analyses of chloroplast DNA sequences, morphology, and combined data have provided consistent support for many of the major branches within the angiosperm, clade Dipsacales. Here we use sequences from three mitochondrial loci to test the existing broad scale phylogeny and in an attempt to resolve several relationships that have remained uncertain. Parsimony, maximum likelihood, and Bayesian analyses of a combined mitochondrial data set recover trees broadly consistent with previous studies, although resolution and support are lower than in the largest chloroplast analyses. Combining chloroplast and mitochondrial data results in a generally well-resolved and very strongly supported topology but the previously recognized problem areas remain. To investigate why these relationships have been difficult to resolve we conducted a series of experiments using different data partitions and heterogeneous substitution models. Usually more complex modeling schemes are favored regardless of the partitions recognized but model choice had little effect on topology or support values. In contrast there are consistent but weakly supported differences in the topologies recovered from coding and non-coding matrices. These conflicts directly correspond to relationships that were poorly resolved in analyses of the full combined chloroplast-mitochondrial data set. We suggest incongruent signal has contributed to our inability to confidently resolve these problem areas. (c) 2007 Elsevier Inc. All rights reserved.

Baccharis scopulorum, a new species of section Caulopterae (Asteraceae: Astereae) from rocky cliffs of southern Brazil

A new species of Baccharis sect. Caulopterae endemic to rocky cliffs in southern Brazil, is here described as Baccharis scopulorum. This new species is characterized by the general presence of basal and persistent leaves, mostly solitary capitula born at the tips of the branches, and many flowered capitula, the pistillate capitula with an urceolate to campanulate involucres. The new species is morphologically most similar to B. altimontana and B. opuntioides, both inhabiting mountain summits in eastern Brazil. A description of B. scopulorum, together with illustrations, a distribution map, habitat description, conservation assessment and diagnostic comparison with B. altimontana and B. opuntioides is presented.

Immunocytochemical identification of adenohypophyseal cells in the pirarucu (Arapaima gigas), an Amazonian basal teleost

The adenohypophysis (AH) of juvenile pirarucu (Arapaima gigas), a representative species of the Osteoglossomorpha (bonytongue fishes, one of the oldest living groups of the teleosts), was studied using histochemical and immunocytochemical methods. The AH is comprised of the pars distalis (PD), without a clear distinction between rostral pars distalis (RPD) and proximal pars distalis (PPD), and the pars intermedia (PI). The neurohypophysis (NH) is positioned on top of the PD and penetrates and branches into the PI. In the most rostral dorsal portion of the PD, adrenocorticotropic cells and fusiform gonadotropic cells were found. In the central PD, scarce prolactin-producing cells and growth-hormone-producing cells were located mainly in the dorsal part, whereas round gonadotropic cells were abundant in the ventral portion of this region. Human thyrotropin immunoreactive cells were not found in the entire AH. In the PI, melanotropic, some adrenocorticotropic, and somatolactin-producing cells were located intermingled surrounding the neurohypophyseal branches. Our results showed that the A. gigas pituitary has some basal characteristics between the ancient Actinopterygii and the more derived teleosts.

A pointcut-based coverage analysis approach for aspect-oriented programs

Aspect-oriented programming (AOP) is a promising technology that supports separation of crosscutting concerns (i.e., functionality that tends to be tangled with, and scattered through the rest of the system). In AOP, a method-like construct named advice is applied to join points in the system through a special construct named pointcut. This mechanism supports the modularization of crosscutting behavior; however, since the added interactions are not explicit in the source code, it is hard to ensure their correctness. To tackle this problem, this paper presents a rigorous coverage analysis approach to ensure exercising the logic of each advice - statements, branches, and def-use pairs - at each affected join point. To make this analysis possible, a structural model based on Java bytecode - called PointCut-based Del-Use Graph (PCDU) - is proposed, along with three integration testing criteria. Theoretical, empirical, and exploratory studies involving 12 aspect-oriented programs and several fault examples present evidence of the feasibility and effectiveness of the proposed approach. (C) 2010 Elsevier Inc. All rights reserved.

Rotation effect on geodesic and zonal flow modes in tokamak plasmas with isothermal magnetic surfaces

The electrostatic geodesic mode oscillations are investigated in rotating large aspect ratio tokamak plasmas with circular isothermal magnetic surfaces. The analysis is carried out within the magnetohydrodynamic model including heat flux to compensate for the non-adiabatic pressure distribution along the magnetic surfaces in plasmas with poloidal rotation. Instead of two standard geodesic modes, three geodesic continua are found. The two higher branches of the geodesic modes have a small frequency up-shift from ordinary geodesic acoustic and sonic modes due to rotation. The lower geodesic continuum is a newzonal flowmode (geodesic Doppler mode) in plasmas with mainly poloidal rotation. Limits to standard geodesic modes are found. Bifurcation of Alfven continuum by geodesic modes at the rational surfaces is also discussed. Due to that, the frequency of combined geodesic continuum extends from the poloidal rotation frequency to the ion-sound band that can have an important role in suppressing plasma turbulence.

Automatic contour extraction from 2D neuron images

This work describes a novel methodology for automatic contour extraction from 2D images of 3D neurons (e.g. camera lucida images and other types of 2D microscopy). Most contour-based shape analysis methods cannot be used to characterize such cells because of overlaps between neuronal processes. The proposed framework is specifically aimed at the problem of contour following even in presence of multiple overlaps. First, the input image is preprocessed in order to obtain an 8-connected skeleton with one-pixel-wide branches, as well as a set of critical regions (i.e., bifurcations and crossings). Next, for each subtree, the tracking stage iteratively labels all valid pixel of branches, tip to a critical region, where it determines the suitable direction to proceed. Finally, the labeled skeleton segments are followed in order to yield the parametric contour of the neuronal shape under analysis. The reported system was successfully tested with respect to several images and the results from a set of three neuron images are presented here, each pertaining to a different class, i.e. alpha, delta and epsilon ganglion cells, containing a total of 34 crossings. The algorithms successfully got across all these overlaps. The method has also been found to exhibit robustness even for images with close parallel segments. The proposed method is robust and may be implemented in an efficient manner. The introduction of this approach should pave the way for more systematic application of contour-based shape analysis methods in neuronal morphology. (C) 2008 Elsevier B.V. All rights reserved.

Boundary and internal conditions for adjoint fluid-flow problems

The ever-increasing robustness and reliability of flow-simulation methods have consolidated CFD as a major tool in virtually all branches of fluid mechanics. Traditionally, those methods have played a crucial role in the analysis of flow physics. In more recent years, though, the subject has broadened considerably, with the development of optimization and inverse design applications. Since then, the search for efficient ways to evaluate flow-sensitivity gradients has received the attention of numerous researchers. In this scenario, the adjoint method has emerged as, quite possibly, the most powerful tool for the job, which heightens the need for a clear understanding of its conceptual basis. Yet, some of its underlying aspects are still subject to debate in the literature, despite all the research that has been carried out on the method. Such is the case with the adjoint boundary and internal conditions, in particular. The present work aims to shed more light on that topic, with emphasis on the need for an internal shock condition. By following the path of previous authors, the quasi-1D Euler problem is used as a vehicle to explore those concepts. The results clearly indicate that the behavior of the adjoint solution through a shock wave ultimately depends upon the nature of the objective functional.

Thin films of xyloglucans for BSA adsorption

In this work. XG extracted from Tamarindus indica (XGT) and Copaifera langsdorffii (XGC) seeds were deposited onto Si wafers as thin films. The characteristics of XGT and XGC adsorbed layers were compared with a commercial XG sample (TKP, Tamarind kernel powder) by ellipsometry, and atomic force microscopy (AFM). Moreover, the adsorption of oxidized derivative of XGT (To60) onto amino-terminated Si wafers and the immobilization of bovine serum albumin (BSA) onto polysaccharides covered wafers, as a function of pH, were also investigated. The XG samples presented molar ratios Glc:Xyl:Gal of 2.4:2.1:1 (XGC) 2.8: 23: 1 (XGT) and 1.91.91 (TKP). The structure of XGT and XGC was determined by O-methy alditol acetate derivatization and showed similar features, but XGC confirmed the presence of more alpha-D-Xyl branches due to more beta-D-Gal ends. XGT deposited onto Si adsorbed as fibers and small entities uniformly distributed, as evidenced by AFM, while TPK and XGC formed larger aggregates. The thickness of To60 onto amino-terminated surface was similar to that determined for XGT onto Si wafers. A maximum in the adsorbed amount of BSA occurred close to its isoelectric point (5.5). These findings indicate that XGT and To60 are potential materials for the development of biomaterials and biotechnological devices. (C) 2008 Elsevier B.V. All rights reserved.

Behaviour of TiO(2)-SiMgO(x) hybrid composites on the solar photocatalytic degradation of polluted air

The photocatalytic performance of TiO(2)-SiMgO(x) ceramic plates for trichloroethylene abatement in gas phase has been evaluated under sun irradiance conditions. A continuous flow Pyrex glass reactor fixed on the focus of a compound parabolic collector has been used. The performance of the hybrid photocatalyst has been evaluated as the variation of TCE conversion and reaction products formation with the solar irradiance at different total gas flow, TCE concentration, and water vapour content. SiMgO(x) not only provides adsorbent properties to the photocatalyst, but it also allows the effective use of the material during low solar irradiance conditions. The adsorption-desorption phenomena play a pivotal role in the behaviour of the system. Thus, TCE conversion curves present two different branches when the sun irradiance increases (sunrise) or decreases (sunset). CO(2), COCl(2) and DCAC were the most relevant products detected. Meanwhile CO(2) concentration was insensitive to the branch analysed, COCl(2) or DCAC were not indicating the ability of these compounds to be adsorbed on the composite. An increase of the UV irradiation at total TCE conversion promotes the CO(2) selectivity. The excess of energy arriving to the reactor favours the direct reaction pathway to produce CO(2). The photonic efficiency, calculated as a function of the rate of CO(2) formation, decreases linearly with the solar irradiance up to around 2 mW cm(-2), where it becomes constant. For decontamination systems high TCE conversion is pursuit and then high solar irradiance values are required, in spite of lower photonic efficiency values. The present photocatalyst configuration, with only 17% of the reactor volume filled with the photoactive material, allows total TCE conversion for 150 ppm and 1 L min(-1) in a wide sun irradiance window from 2 to 4 mW cm(-2). The incorporation of water vapour leads to an increase of the CO(2) selectivity keeping the TCE conversion around 90%, although significant amounts of COCl(2) were observed. (c) 2010 Elsevier B.V. All rights reserved.

Human papillomavirus type 16 variants in cervical cancer from an admixtured population in Brazil

Several studies indicate that molecular variants of HPV-16 have different geographic distribution and risk associated with persistent infection and development of high-grade cervical lesions. In the present study, the frequency of HPV-16 variants was determined in 81 biopsies from women with cervical intraepithelial neoplasia grade III or invasive cervical cancer from the city of Belem, Northern Brazil. Host DNAs were also genotyped in order to analyze the ethnicity-related distribution of these variants. Ninie different HPV-16 LCR variants belonging to four phylogenetic branches were identified. Among these, two new isolates were characterized. The most prevalent HPV-16 variant detected was the Asian-American B-2,followed by the European B-12 and the European prototype. Infections by multiple variants were observed in both invasive cervical cancer and cervical intraepithelial neoplasia grade III cases. The analysis of a specific polymorphism within the E6 viral gene was performed in a subset of 76 isolates. The E6-350G polymorphism was significantly more frequent in Asian-American variants. The HPV-16 variability detected followed the same pattern of the genetic ancestry observed in Northern Brazil, with European, Amerindian and African roots. Although African ancestry was higher among women infected by the prototype, no correlation between ethnical origin and HPV-16 variants was found. These results corroborate previous data showing a high frequency of Asian-American variants in cervical neoplasia among women with multiethnic origin.

Static and dynamic bimolecular fluorescence quenching of porphyrin dendrimers in solution

The fluorescence quenching kinetics of two porphyrin dendrimer series (GnTPPH(2) and GnPZn) by different type of quenchers is reported. The microenvironment surrounding the core in GnPZn was probing by core-quencher interactions using benzimidazole. The dependence of quencher binding constant (K(a) ) on generation indicates the presence of a weak interaction between branches and the core of the porphyrin dendrimer. The similar free volume in dendrimers of third and fourth generation suggests that structural collapse in high generations occurs by packing of the dendrimer peripheral layer. Dynamic fluorescence quenching of the porphyrin core by 1,3-dicyanomethylene-2-methyl-2-pentyl-indan (PDCMI) in GnTPPH(2) is a distance dependent electron transfer process with an exponential attenuation factor beta=0.33 angstrom(-1). The quenching by 1,2-dibromobenzene occurs by diffusion process of the quencher toward to the porphyrin core, and its rate constant is practically independent of dendrimer generation.

Produktion, skador och grenegenskaper hos 10-årig tall i ett kombinerat förbands- och avkommeförsök : Volume production, damages and branch properties in a 10-year old combined spacing and progeny trial of Scots pine

A Scots pine (Pinus sylvestris) progeny trial was established in 1990, in the southwestern part of Sweden. The offspring was from 30 plus trees. The trial is located on abandoned agricultural land and has a single tree block design with a variation in spacing. The trial has been damaged by voles. At a tree age of ten years, growth, damages and branch properties were estimated. An analysis of variance on height, diameter and stem volume shows significant difference between spacing and progenies as well as interactions between these factors. As indicated by a better annual height increment and fewer and thinner branches at each whorl the densest spacing has the highest potential to produce quality logs.There were also differences between progenies in growth and quality traits. Some progenies combined good growth and branch characters with low mortality, straight stems and few damages. Other progenies had superior volume production.

Vedegenskaper i härskande och behärskade granar vid Remingstorp : Wood properties in dominant and sub-dominant trees of Norway spruce at Remingstorp

Variation in wood properties for Picea abies trees and logs of different dimensions has been studied at two sites in southern Sweden of different site quality class. Trees have been classified as dominant or sub-dominant, according to their height. Log and board grades were classified and strength grade of boards, basic density and annual ring width measured. A similar study made on four northern sites was used as reference material.Sub-dominant trees were of superior quality in comparison to dominant trees, when classified by log and board grades or strength grading. Differences were accentuated for the second log where the sub-dominant trees had superior strength and low amount of boards with coarse branches. The results correspond well to those from the northern region, Jämtland. The classifica¬tion of boards as well as bending strength indicated superior properties on timber from northern sites even though the basic density was similar.

Ökad förståelse bland företagsledare för nyttan av utvecklingsinsatser inom arbetsmiljöområdet

Sammanfattning Föreliggande rapport avser en delstudie inom projektet Attraktiv Konkurrenskraft (AKK) Syftet med detta arbete är att utvärdera fem metoder som kan ”väcka insikt” om nyttan av att starta utvecklingsaktiviteter för att bättre ta tillvara de mänskliga resurserna i arbetet. Baserat på detta ska en metod väljas för fördjupade studier. Drivkrafterna för att skapa bra arbetsmiljöer är många. Den primära kan sägas vara den humanitära drivkraften. Förutom de överväganden som ligger till grund för arbetsmiljölagstiftning och avtal mellan arbetsmarknadens parter finns alltså goda skäl för företagare att prioritera arbetsmiljöarbete. Den fråga som berörs i detta arbete är i vad mån det är möjligt att genom enkla insatser påverka en arbetsmiljöansvarig chefs benägenhet att gå till beslut om att genomföra insatser för att utveckla förutsättningarna för att bättre nyttja de mänskliga resurserna i organisationen. Målet är att chefen bestämmer sig för att påbörja en beslutsprocess om utvecklingsaktiviteter för att ta tillvara de mänskliga resurserna i arbetet vilket ökar förutsättningarna att rekrytera, behålla och engagera kompetent personal. Som resultat av förstudien har fem olika insiktsmetoder utvecklats och anpassats. Dessa metoder har kallats GAP-analys, Fokusgrupper Attraktivt Arbete, Visit, Riskanalys och Scenario. De tio företagen som deltog hade mellan 11 och 39 anställda, och deras verksamheter var inom områdena tillverkning, reparation och underhåll. Resultat från användning av metoderna visar att alla metoderna uppfyller kriterierna att vara enkla att förstå och snabba att genomföra. Fokusgrupper, Visit och Riskanalys ger konkret vägledning för fortsatt utvecklingsarbete. Fokusgrupper ger ett brett underlag för en fortsättning som bygger på dialog, en djupare analys på individnivå samt har psykiska och sociala dimensioner. Därmed sågs Fokusgrupper som den mest intressanta metoden att gå vidare med. Denna studie indikerar att det finns möjlighet att påverka ledare att ta beslut om aktiviteter för att utveckla den mänskliga resursen. Det finns därmed anledning att ytterligare studera ett antal företag där en och samma metod används. Valet har fallit på Fokusgrupper, även om andra metoder skulle vara tänkbara. Abstract This report concerns a sub-study of the project attractive competitiveness (AKK). The aim of the work is to evaluate five methods that are supposed to” raise awereness” about the advantages of initiating activities to better utilize human resources at work. Based on that shall one method be elected for depend studies. The driving forces for creation of good work environments are many. The primary can be said to be the humanitarian driving force. Except for the considerations that are behind the work environment legislations and agreements between social partners is therefore good reasons for entrepreneurs to give priority to work environment work. The focus of this study is to which extent it is possible by a limited input influence the liability of a manager with responsibilities for the work environment to take decisions to start a process aimed at improving the use of the human resources in the company. The goal is that the manager decides to start such a process which also is supposed to recruit, retain and engage competent staff. In the sub-study have five insight methods been developed or adapted. Those methods have been named gap-analysis, focus groups attractive work, visit, risk analysis, and scenario. The ten participating companies employed between eleven and thirty-nine persons. The companies represented different branches as production, repair work and maintenance. The results from the test of the methods shows that they all meet the criteria’s to be simple to understand and quick to carry through. Focus groups attractive work, visit, and risk analysis gives substantial guidance for further development work. Focus groups attractive work gives a broad base for a continuation built on a dialogue, a deeper analyses of individual level as well as mental and social dimensions. Of that reason chosen for deepened studies. This study indicates that there are possibilities to influence managers to decide about activities aimed at better use of human resources. There are therefore reasons to make further studies in a number of companies where the elected method is used.