Proposta de método para avaliação do desempenho térmico de residências unifamiliares em clima quente e úmido

Nowadays, evaluation methods to measure thermal performance of buildings have been developed in order to improve thermal comfort in buildings and reduce the use of energy with active cooling and heating systems. However, in developed countries, the criteria used in rating systems to asses the thermal and energy performance of buildings have demonstrated some limitations when applied to naturally ventilated building in tropical climates. The present research has as its main objective to propose a method to evaluate the thermal performance of low-rise residential buildings in warm humid climates, through computational simulation. The method was developed in order to conceive a suitable rating system for the athermal performance assessment of such buildings using as criteria the indoor air temperature and a thermal comfort adaptive model. The research made use of the software VisualDOE 4.1 in two simulations runs of a base case modeled for two basic types of occupancies: living room and bedroom. In the first simulation run, sensitive analyses were made to identify the variables with the higher impact over the cases´ thermal performance. Besides that, the results also allowed the formulation of design recommendations to warm humid climates toward an improvement on the thermal performance of residential building in similar situations. The results of the second simulation run was used to identify the named Thermal Performance Spectrum (TPS) of both occupancies types, which reflect the variations on the thermal performance considering the local climate, building typology, chosen construction material and studied occupancies. This analysis generates an index named IDTR Thermal Performance Resultant Index, which was configured as a thermal performance rating system. It correlates the thermal performance with the number of hours that the indoor air temperature was on each of the six thermal comfort bands pre-defined that received weights to measure the discomfort intensity. The use of this rating system showed to be appropriated when used in one of the simulated cases, presenting advantages in relation to other evaluation methods and becoming a tool for the understanding of building thermal behavior

Utilização de um aplicativo de simulação computacional na avaliação de desempenho térmico de protótipo de habitação de interesse social (his)

This Masters Degree dissertation seeks to make a comparative study of internal air temperature data, simulated through the thermal computer application DesignBuilder 1.2, and data registered in loco through HOBO® Temp Data Logger, in a Social Housing Prototype (HIS), located at the Central Campus of the Federal University of Rio Grande do Norte UFRN. The prototype was designed and built seeking strategies of thermal comfort recommended for the local climate where the study was carried out, and built with panels of cellular concrete by Construtora DoisA, a collaborator of research project REPESC Rede de Pesquisa em Eficiência Energética de Sistemas Construtivos (Research Network on Energy Efficiency of Construction Systems), an integral part of Habitare program. The methodology employed carefully examined the problem, reviewed the bibliography, analyzing the major aspects related to computer simulations for thermal performance of buildings, such as climate characterization of the region under study and users thermal comfort demands. The DesignBuilder 1.2 computer application was used as a simulation tool, and theoretical alterations were carried out in the prototype, then they were compared with the parameters of thermal comfort adopted, based on the area s current technical literature. Analyses of the comparative studies were performed through graphical outputs for a better understanding of air temperature amplitudes and thermal comfort conditions. The data used for the characterization of external air temperature were obtained from the Test Reference Year (TRY), defined for the study area (Natal-RN). Thus the author also performed comparative studies for TRY data registered in the years 2006, 2007 and 2008, at weather station Davis Precision Station, located at the Instituto Nacional de Pesquisas Espaciais INPE-CRN (National Institute of Space Research), in a neighboring area of UFRN s Central Campus. The conclusions observed from the comparative studies performed among computer simulations, and the local records obtained from the studied prototype, point out that the simulations performed in naturally ventilated buildings is quite a complex task, due to the applications limitations, mainly owed to the complexity of air flow phenomena, the influence of comfort conditions in the surrounding areas and climate records. Lastly, regarding the use of the application DesignBuilder 1.2 in the present study, one may conclude that it is a good tool for computer simulations. However, it needs some adjustments to improve reliability in its use. There is a need for continued research, considering the dedication of users to the prototype, as well as the thermal charges of the equipment, in order to check sensitivity

A percepção dos trabalhadores da enfermagem acerca da avaliação de desempenho do servidor público

A concepção de avaliação de desempenho dos trabalhadores da enfermagem, na maioria das vezes, é a de um ato de julgamento entre o certo e o errado, relacionado às ações e posturas desenvolvidas no contexto do seu trabalho. A avaliação de desempenho, no entanto, pode ser visualizada pelos trabalhadores como um importante instrumento que favorece o feedback do fazer profissional, desafiando-os a olharem para si mesmos, para o desenvolvimento de suas atribuições profissionais, proporcionando um real entendimento de sua importância na sociedade. Assim tem-se como objetivo geral conhecer a percepção dos trabalhadores da enfermagem de um Hospital Universitário localizado no extremo sul do Rio Grande do Sul (HU) acerca da sistemática da avaliação dos servidores públicos vivenciada na instituição e como objetivo específico conhecer a percepção dos trabalhadores da enfermagem do HU acerca da sistemática da avaliação dos servidores públicos no período do estágio probatório, adotada na instituição. Trata-se de uma pesquisa com abordagem qualitativa do tipo exploratória, desenvolvida com 70 trabalhadores de enfermagem. Para a coleta de dados utilizou-se a técnica de entrevista. Mediante a análise textual discursiva, construíram-se duas categorias: A avaliação do desempenho na concepção de trabalhadores da enfermagem e Serviço público: representatividade para o serviço da enfermagem. A avaliação do desempenho do servidor público pode ser influenciada pelo período de estágio probatório, pela sua vulnerabilidade na instituição, com possibilidade de conquistar a estabilidade ou perdê-la. Decorrido o período probatório, alguns trabalhadores modificam seu comportamento, demonstrando, por vezes, falta de comprometimento com seu fazer. No entanto, tal mudança pode estar relacionada com a cultura organizacional existente na instituição pública e, ainda, com um aparente descontentamento dos trabalhadores na realização da avaliação de desempenho, por não receberem um retorno significativo de cada avaliação. Pensar a sistemática de avaliação de desempenho com os trabalhadores da enfermagem significou a possibilidade de desencadear um processo de discussão e de reflexão sobre os diferentes modos de ser e fazer a enfermagem.

O perfil dos empreendedores de pequenas empresas de base tecnológica: caracterização e principais desafios frente às exigências do mercado

Las pequeñas empresas han sido cada vez más espacio en importantes niveles socio-económicos, industriales y políticos. Sin embargo, este segmento de negocio tiene sus propias peculiaridades, distinguiéndose como una de la otra la esencia de los negocios. Un ejemplo concreto, se refiere a las pequeñas empresas de base tecnológica, que tienen como principal característica el uso intensivo de I + D y por lo tanto, requieren actividades específicas en relación a las pequeñas empresas en otros sectores de actividad. Este artículo examina en primer lugar las principales características de las pequeñas empresas de base tecnológica y sus diferencias con las pequeñas empresas en general. Posteriormente, el modelo muestra el perfil de los empresarios que trabajan en pequeñas empresas de base tecnológica y, por último, espera a usted el contexto de este segmento de empresas comerciales. La metodología tiene carácter exploratorio, utilizando la búsqueda en la literatura para garantizar los subsidios necesarios para el razonamiento teórico del estudio. ¿Qué aspecto concluyente, parece que los empresarios de las pequeñas empresas de base tecnológica tienen distintas calificaciones en relación con otros empresarios de pequeñas empresas, en particular la necesidad de estar continuamente creando nuevas ideas y el desarrollo de productos innovadores.

Necessidades e expetativas dos professores face à supervisão/avaliação de desempenho docente no âmbito da educação visual/artes visuais

Dissertação apresentada para cumprimento dos requisitos necessários à obtenção do grau de Mestre em Ciências da Educação – Especialização em Supervisão Pedagógica.

Avaliação do Desempenho Docente na RAM Potencialidades e Constrangimentos

Trabalho de Projecto apresentado para cumprimento dos requisitos necessários à obtenção do grau de Mestre em Ciências da Educação: área de especialização em Supervisão Pedagógica

Avaliação do desempenho de fundações em edificação no DF com a utilização de técnicas de interação solo-estrutura

Dissertação (mestrado)—Universidade de Brasília, Faculdade de Tecnologia, Departamento de Engenharia Civil e Ambiental, 2015.

Contributos dos coordenadores de departamento curricular e dos delegados de grupo na avaliação de desempenho docente : estudo de caso numa escola básica e secundária no norte da Região Autónoma da Madeira

O presente trabalho foi desenvolvido no âmbito da dissertação de Mestrado em Supervisão Pedagógica e insere-se na linha de investigação de políticas educativas e supervisão pedagógica. Pretendeu-se encontrar, através da investigação que aqui se apresenta, os contributos dos coordenadores de departamento curricular e delegados de grupo com funções de avaliadores internos no processo de avaliação de desempenho docente. Procurou-se ainda encontrar o perfil dos avaliadores para se poder exercer o cargo, assim como apresentar o enquadramento teórico dos autores e legislação que o sustentam. Este estudo focalizou-se no Decreto Regulamentar Regional n.º 26/2012/M, de 8 de outubro que regulamenta as novas regras da avaliação de desempenho docente e a unidade de estudo deste trabalho é uma escola pública do ensino básico e secundário, no concelho de São Vicente, Norte da Madeira. Para dar cumprimento aos eixos de análise do trabalho utilizou-se a metodologia qualitativa estudo de caso e através de uma análise documental, de inquéritos por entrevista dirigidos aos 12 avaliadores internos - coordenadores de departamento e delegados de grupo - e aos 14 docentes avaliados, considerados a amostra da dimensão interna, encontrou-se um perfil de avaliador interno de desempenho docente na prática, assim como os contributos destes na avaliação de desempenho docente, de acordo com a legislação regional da Madeira. Tendo por base os resultados obtidos, concluímos que o novo modelo de avaliação de desempenho de docente é um modelo formativo, privilegia o trabalho colaborativo, promove a reflexão, a partilha e a troca de experiências, bem como a melhoria das práticas pedagógicas e o desenvolvimento profissional, apesar da conjuntura atual não promover a progressão na carreira devido ao congelamento como medida de austeridade, o que desmotiva os docentes avaliados e faz ainda com que estes profissionais encarem a avaliação interna como um trabalho menos sério, que não premeia o desempenho e o mérito.

Avaliação do desempenho do aço D6 tratado termicamente e netretado em plasma com gaiola catódica visando aplicação industrial

In this research there was an evaluation of the best conditions of nitriding in plasma within a cathodic cage at an atmosphere of 80% N2-20%H2 in samples of tool manganese steel AISI D6, cold working, treated thermally in the following conditions: tension relief, treated thermally to temperature of maximum heat, temperate heat and temperate and temperate heat. A pressure of 2.5mbar and temperatures of 400 and 300ºC com treatment time of two and three hours were used to evaluate its performance as cutting tool (punch) of bicycle backs. Hardness, micro-structural aspects (layer thickness, interface, grain size etc), and crystal phases on the surface were appraised. When treated to tension relief, thermally treated to maximum heat temperature, temperature and temperate heat, the samples presented hardness levels of 243HV, 231HV, 832HV, and 653HV, respectively. The best nitrification conditions were: four hours and 300ºC for heat samples. A superficial hardness of 1000HV and a 108µm thickness for the nitrided layer were found in these samples

Avaliação do desempenho do aço AISI D2 tratado termicamente e nitretado em plasma com gaiola catódica visando aplicação industrial

In the research, steel samples tool AISI D2, treated thermally, in the conditions: relief of tension, when maximum, seasoned and seasoned was treated thermally in the temperature of revenimento and revenida had been nitrited in plasma with cathodic cage, in atmosphere of 80%N2:20%H2. One used pressure of 2,5 mbar, 400 and 480°C temperatures with treatment time of 3 and 4 hours, with the objective to evaluate its performance in pipes cut tool. It was compared that the performance of the same steel when only thermally treated, both with tension relief. It was evaluated its hardness. Microstructural aspects (the layer thickness, interface, graisn size, etc) and crystalline phases on the surface. Besides, it was verified accomplishment possibility of nitriding simultaneous to annealing treatment. The tempering samples had presented hardness levels of 600 HV, while in nitrited samples these values had been 1100 HV

Proposta de método para avaliação do desempenho térmico de residências unifamiliares em clima quente e úmido

Nowadays, evaluation methods to measure thermal performance of buildings have been developed in order to improve thermal comfort in buildings and reduce the use of energy with active cooling and heating systems. However, in developed countries, the criteria used in rating systems to asses the thermal and energy performance of buildings have demonstrated some limitations when applied to naturally ventilated building in tropical climates. The present research has as its main objective to propose a method to evaluate the thermal performance of low-rise residential buildings in warm humid climates, through computational simulation. The method was developed in order to conceive a suitable rating system for the athermal performance assessment of such buildings using as criteria the indoor air temperature and a thermal comfort adaptive model. The research made use of the software VisualDOE 4.1 in two simulations runs of a base case modeled for two basic types of occupancies: living room and bedroom. In the first simulation run, sensitive analyses were made to identify the variables with the higher impact over the cases´ thermal performance. Besides that, the results also allowed the formulation of design recommendations to warm humid climates toward an improvement on the thermal performance of residential building in similar situations. The results of the second simulation run was used to identify the named Thermal Performance Spectrum (TPS) of both occupancies types, which reflect the variations on the thermal performance considering the local climate, building typology, chosen construction material and studied occupancies. This analysis generates an index named IDTR Thermal Performance Resultant Index, which was configured as a thermal performance rating system. It correlates the thermal performance with the number of hours that the indoor air temperature was on each of the six thermal comfort bands pre-defined that received weights to measure the discomfort intensity. The use of this rating system showed to be appropriated when used in one of the simulated cases, presenting advantages in relation to other evaluation methods and becoming a tool for the understanding of building thermal behavior

Utilização de um aplicativo de simulação computacional na avaliação de desempenho térmico de protótipo de habitação de interesse social (his)

This Masters Degree dissertation seeks to make a comparative study of internal air temperature data, simulated through the thermal computer application DesignBuilder 1.2, and data registered in loco through HOBO® Temp Data Logger, in a Social Housing Prototype (HIS), located at the Central Campus of the Federal University of Rio Grande do Norte UFRN. The prototype was designed and built seeking strategies of thermal comfort recommended for the local climate where the study was carried out, and built with panels of cellular concrete by Construtora DoisA, a collaborator of research project REPESC Rede de Pesquisa em Eficiência Energética de Sistemas Construtivos (Research Network on Energy Efficiency of Construction Systems), an integral part of Habitare program. The methodology employed carefully examined the problem, reviewed the bibliography, analyzing the major aspects related to computer simulations for thermal performance of buildings, such as climate characterization of the region under study and users thermal comfort demands. The DesignBuilder 1.2 computer application was used as a simulation tool, and theoretical alterations were carried out in the prototype, then they were compared with the parameters of thermal comfort adopted, based on the area s current technical literature. Analyses of the comparative studies were performed through graphical outputs for a better understanding of air temperature amplitudes and thermal comfort conditions. The data used for the characterization of external air temperature were obtained from the Test Reference Year (TRY), defined for the study area (Natal-RN). Thus the author also performed comparative studies for TRY data registered in the years 2006, 2007 and 2008, at weather station Davis Precision Station, located at the Instituto Nacional de Pesquisas Espaciais INPE-CRN (National Institute of Space Research), in a neighboring area of UFRN s Central Campus. The conclusions observed from the comparative studies performed among computer simulations, and the local records obtained from the studied prototype, point out that the simulations performed in naturally ventilated buildings is quite a complex task, due to the applications limitations, mainly owed to the complexity of air flow phenomena, the influence of comfort conditions in the surrounding areas and climate records. Lastly, regarding the use of the application DesignBuilder 1.2 in the present study, one may conclude that it is a good tool for computer simulations. However, it needs some adjustments to improve reliability in its use. There is a need for continued research, considering the dedication of users to the prototype, as well as the thermal charges of the equipment, in order to check sensitivity

Estratégias de internacionalização das micro e pequenas empresas do sector de moda praia de Salvador

Este estudo tem por objectivo conhecer as estratégias de internacionalização das micro e pequenas empresas do sector de moda praia de Salvador, procurando compreender e desenvolver as condições para promover uma cultura de internacionalização. O estudo caracteriza-se por uma abordagem mista, conciliando uma análise qualitativa, com uma quantitativa, sendo o inquérito, o método utilizado para a recolha de dados. Pretende-se obter informações sobre as características destas empresas com intuito de analisa-las e identificar a etapa em que se encontram relativamente ao processo de internacionalização. Como resultado verificou-se que estas empresas ainda estão num processo muito inicial de internacionalização, a exportação configura-se apenas como uma actividade acessória, aquém de uma estratégia consolidada de internacionalização. Estas empresas acabam por não dispor de uma estrutura e dimensão que permita encetar esses esforços sem o apoio de conjunto de políticas de incentivo e suporte à internacionalização. ABSTRACT: The objective of this study is to identify the intemationalization strategies of Salvador's micro and small enterprises of Beachwear, seeking to comprehend and develop the conditions to promote a culture of internationalization. The study is characterized by a mixed approach, combining a qualitative analysis with a quantitative, being the inquiry, the method used to collect the data The aim is to obtain information's about the characteristics of this enterprises, with the goal to analyse them and identify in which stage of the internationalization process their situated in. As a result, it was verified that this enterprise are still in a very primary stage of internationalization, the exportation is viewed only has an accessory activity, lacking in a consolidated strategy of internationalization. This enterprises end up with having no structure and dimension to enable them to accomplish those efforts, without a set of internationalization incentive and support policies.

Nitretação em plasma com gaiola catódica: caracterização e avaliação do desempenho da camada nitretada em facas de corte

Nowadays, in the plastic industry are used mills that accomplish the recycling of residues generated in the production of its components. These mills contain cut sheets that suffer accelerated wear, once they are submitted constantly to the tribologic efforts, decreasing its useful life. To reduce this problem, it s used noble steels or takes place superficial treatments. The ionic nitriding process presents some limitations related to the uniformity of the layer in pieces with complex geometry, committing its application in pieces as knives, head offices, engagements, etc. However, the new technique of nitriding in cathodic cage eliminates some problems, as the restrictions rings, inherent to the conventional ionic nitriding. In present work, was studied the use viabilization of steels less noble, as SAE 1020, SAE 4320 and SAE 4340, nitreded by two different techniques, to substitute the AISI 01 steels, usually used in the cut knifes fabrication, seeking to reduce the costs and at the sane time to increase the useful life of these knifes. The steel most viable was the SAE 4340, nitrided in cathodic cage, because it presented uniformity in thickness and in the hardness of the layer, besides of increased 58% in the average its useful life