Sustainable mortars with incorporation of microencapsulated phase change materials

The construction industry is responsible for high energy and raw materials consumption. Thus, it is important to minimize the high energy consumption by taking advantage of renewable energy sources and reusing industrial waste, decreasing the extraction of natural materials. The mortars with incorporation of phase change materials (PCM) have the ability to regulate the temperature inside buildings, contributing to the thermal comfort and reduction of the use of heating and cooling equipment, using only the energy supplied by the sun. The simultaneous incorporation of PCM and fly ash (FA) can reduce the energy consumption and the amount of materials landfilled. However, the addition of these materials in mortars modifies its characteristics. The main purpose of this study was the production and characterization in the fresh and hardened state of mortars with incorporation of different contents of PCM and FA. The binders studied were aerial lime, hydraulic lime, gypsum and cement. The proportion of PCM studied was 0%, 20%, 40% and 60% of the mass of the sand. The content of fly ash added to the mortars was 0%, 20%, 40% and 60% of the mass of the binder. It was possible to observe that the incorporation of PCM and fly ash in mortars caused differences in properties such as workability, microstructure, water absorption, compressive strength, flexural strength and adhesion.

Mortars with incorporation of PCM based in different binders: mechanical and thermal behavior

Currently we are witnessing a huge concern of society with the parameters of comfort of the buildings and the energetic consumptions. It is known that there is a huge consumption of non-renewable sources of energy. Thus, it is urgent to develop and explore ways to take advantage of renewable sources of energy by improving the energy efficiency of buildings. The mortars with incorporation of phase change materials (PCM) have the ability to regulate the temperature inside buildings, contributing to the thermal comfort and reduction of the use of heating and cooling equipment, using only the energy supplied by the sun. However, the incorporation of phase change materials in mortars modifies its characteristics. The main purpose of this study was mechanical and thermal characterization of mortars with incorporation of PCM in mortars based in different binders. The binders studied were aerial lime, hydraulic lime, gypsum and cement. For each type of binder a reference composition (0% PCM) and a composition with incorporation of 40% of PCM were developed. It was possible to observe that the incorporation of PCM in mortars caused differences in properties such as workability, compressive strength, flexural strength and adhesion, however leads to an improvement of thermal behavior.

Revisões da infraestrutura viária local: o reconhecimento do lugar público no território desruralizado e extensamente urbanizadode Santa Maria da Feira

Tese de Doutoramento Arquitetura, Cidade e Território.

D'une littérature mal nommée

Depuis les années 1980, lorsqu’elle émerge associée à la Marche des Beurs, de son vrai nom Marche pour l’égalité et contre le racisme, la littérature produite par les écrivains français nés de parents immigrés du Maghreb fait l’objet d’une revendication de reconnaissance et de légitimation culturelle qui prolonge la revendication politique d’intégration à la société française des populations issues de l’immigration. L’histoire de ce mouvement littéraire est donc celle de la lutte pour une place dans le champ littéraire français moyennant l’accès au dispositif institutionnel qui y introduit œuvre et auteur : maisons d’édition, presse et médias audiovisuels, librairies, prix littéraires, universités. Cet appareil de reconnaissance et de légitimation, Michel Laronde l’appelle l’Institution. L’un des instruments de l’Institution est la catégorisation.

Lideranças curriculares intermédias no contexto da avaliação externa das escolas em Portugal

Tese de Doutoramento em Ciências da Educação (área de especialização em Desenvolvimento Curricular).

In vitro screening of Amazonian plants for hemolytic activity and inhibition of platelet aggregation in human blood

In the present study, different aerial parts from twelve Amazonian plant species found in the National Institute for Amazon Research's (INPA's) Adolpho Ducke Forest Reserve (in Manaus, Amazonas, Brazil) were collected. Separate portions of dried, ground plant materials were extracted with water (by infusion), methanol and chloroform (by continuous liquid-solid extraction) and solvents were removed first by rotary evaporation, and finally by freeze-drying which yielded a total of seventy-one freeze-dried extracts for evaluation. These extracts were evaluated initially at concentrations of 500 and 100 µg/mL for in vitro hemolytic activity and in vitro inhibition of platelet aggregation in human blood, respectively. Sixteen extracts (23 % of all extracts tested, 42 % of all plant species), representing the following plants: Chaunochiton kappleri (Olacaceae), Diclinanona calycina (Annonaceae), Paypayrola grandiflora (Violaceae), Pleurisanthes parviflora (Icacinaceae), Sarcaulus brasiliensis (Sapotaceae), exhibited significant inhibitory activity towards human platelet aggregation. A group of extracts with antiplatelet aggregation activity having no in vitro hemolytic activity has therefore been identified. Three extracts (4 %), all derived from Elaeoluma nuda (Sapotaceae), exhibited hemolytic activity. None of the plant species in this study has known use in traditional medicine. So, these data serve as a baseline or minimum of antiplatelet and hemolytic activities (and potential usefulness) of non-medicinal plants from the Amazon forest. Finally, in general, these are the first data on hemolytic and inhibitory activity on platelet aggregation for the genera which these plant species represent.

Reproductive biology of Ameerega trivittata (Anura: Dendrobatidae) in an area of terra firme forest in eastern Amazonia

The reproductive success of tropical amphibians is influenced by factors such as body size and the characteristics of breeding sites. Data on reproductive biology are important for the understanding of population dynamics and the maintenance of species. The objectives of the present study were to examine the abundance of Ameerega trivittata, analyze the use of microhabitats by calling males and the snout-vent length (SVL) of breeding males and females, the number of tadpoles carried by the males and mature oocytes in the females, as well as the relationship between the SVL of the female and both the number and mean size of the mature oocytes found in the ovaries. Three field trips were conducted between January and September, 2009. A total of 31 plots, with a mean area of 2.3 ha, were surveyed, resulting in records of 235 individuals, with a mean density of 3.26 individuals per hectare. Overall, 66.1% of the individuals sighted were located in the leaf litter, while 17.4% were perched on decaying tree trunks on the forest floor, 15.7% on the aerial roots of Cecropia trees, and 0.8% on lianas. Males were observed transporting a mean of 10.8 tadpoles on their backs. A significant correlation was found between the size of the females and the mean diameter of the oocytes. New data were collected on the size of oocytes and no pattern was found in the type of perches used by calling males of the different Ameerega species.

Structure and distribution of glandular trichomes in three species of Bignoniaceae

Glandular trichomes play a major role in the morphological characterization of the Bignoniaceae. Due to their great diversity of forms and functions, this study aimed to inventory the glandular trichomes present in the aerial vegetative axis of Amphilophium magnoliifolium, Martinella obovata and Stizophyllum riparium, analyze their structure and register the participation of ants in these plants. Fresh samples from the nodal region, petiole and from medium to apical regions of the leaflet blade were fixed and processed according to usual methods in light and scanning electron microscopies. The glandular trichomes found were: peltate, capitate, stipitate, and patelliform/cupular. Peltate trichomes are the most abundant ones and present the most uniform distribution. Patelliform/cupular trichomes occur at specific regions, such as prophylls, leaflet blade and nodal regions. Martinella obovata is the only species that presents capitate and stipitate trichomes, which are widely distributed along the entire aerial vegetative axis. Ants were found in all species, mainly at nodal regions. The occurrence of the capitate-type trichome is reported for the first time to the genus.

Ranking procedure based on mechanical, durability and thermal behavior of mortars with incorporation of phase change materials

Nowadays, considering the high variety of construction products, adequate material selection, based on their properties and function, becomes increasingly important. In this research, a ranking procedure developed by Czarnecki and Lukowski is applied in mortars with incorporation of phase change materials (PCM). The ranking procedure transforms experimental results of properties into one numerical value. The products can be classified according to their individual properties or even an optimized combination of different properties. The main purpose of this study was the ranking of mortars with incorporation of different contents of PCM based in different binders. Aerial lime, hydraulic lime, gypsum and cement were the binders studied. For each binder, three different mortars were developed. Reference mortars, mortars with incorporation of 40% of PCM and mortars with incorporation of 40% of PCM and 1% of fibers, were tested. Results show that the incorporation of PCM in mortars changes their global performance.

Contributos dos doutores palhaços da Operação Nariz Vermelho para a qualidade da adaptação e do desenvolvimento em contexto pediátrico: o olhar da criança e seus pais

Tese de doutoramento em Ciências da Educação (Área Especialidade em Psicologia da Educação)

Percursos profissionais na área do emprego e educação e formação de adultos: estudo acerca do papel da orientação vocacional na gestão de carreiras na atualidade

Dissertação de mestrado em Sociologia (área de especialização em Desenvolvimento e Políticas Socias)

A multi–physics approach applied to masonry structures with non–hydraulic lime mortars

Tese de Doutoramento em Engenharia Civil (área de especialização em Engenharia de Estruturas).

Optimización de Arquitecturas de Procesamiento Digital de Señales en Lógica Programable para Aplicaciones en Vuelos No Tripulados

En dispositivos electrónicos de última generación destinados a funciones de comunicación o control automático, los algoritmos de procesamiento digital de señales trasladados al hardware han ocupado un lugar fundamental. Es decir el estado de arte en el área de las comunicaciones y control puede resumirse en algoritmos basados en procesamiento digital de señales. Las implementaciones digitales de estos algoritmos han sido estudiadas en áreas de la informática desde hace tiempo. Sin embargo, aunque el incremento en la complejidad de los algoritmos modernos permite alcanzar desempeños atractivos en aplicaciones específicas, a su vez impone restricciones en la velocidad de operación que han motivado el diseño directamente en hardware de arquitecturas para alto rendimiento. En este contexto, los circuitos electrónicos basados en lógica programable, principalmente los basados en FPGA (Field-Programmable Gate Array), permiten obtener medidas de desempeño altamente confiables que proporcionan el acercamiento necesario hacia el diseño electrónico de circuitos para aplicaciones específicas “ASIC-VLSI” (Application Specific Integrated Circuit - Very Large Scale Integration). En este proyecto se analiza el diseño y la implementación de aquitecturas electrónicas para el procesamiento digital de señales, con el objeto de obtener medidas reales sobre el comportamiento del canal inalámbrico y su influencia sobre la estimación y el control de trayectoria en vehículos aéreos no tripulados (UAV, Unmanned Aerial Vehicle). Para esto se propone analizar un dispositivo híbrido basado en microcontroladores y circuitos FPGA y sobre este mismo dispositivo implementar mediante algoritmo un control de trayectoria que permita mantener un punto fijo en el centro del cuadro de una cámara de video a bordo de un UAV, que sea eficiente en términos de velocidad de operación, dimensiones y consumo de energía.

Efeitos do arsênico sôbre a cultura do algodoeiro em terra arenosa

The authors studied the action of arsenic, in the form of lead arsenate and sodium arsenite, on cotton in white sandy soil of Piracicaba, State of S. Paulo, Brazil. The experiment was carried out in Mitscherlich pots, applying increasing quantities of the above mentioned compounds. The following conclusions were reached: sodium arsenite is more toxic than lead arsenate. 48 pounds per acre of lead arsenate and 16 pounds per acre of sodium arsenite reduced the vegetative development and the production of cotton. The roots were more seriously affected than the aerial parts. Sandy soils were sensitive to arsenic toxicity. The arsenic mobilization in the soil seems to depend upon factors such as, the a- cidity, the concentration of Fe2O3, CaO, P2O5 and soil colloids, both clay and humus components. The authors suggest, based on their own experiment and after a detailed study of the literature, the use of organic insecticids which may not leave toxic residues, rotation of crops, application of lime and reduction of arsenical sprays to a mini mum. Arsenic compounds should not be used in soils destined to the cultivation of food plants. Rice should not be planted in soils contaminated by arsenic compounds during several years of cotton cultivation. Future experiments are planed, using other soils such as "terra roxa", in Mitscherlich pots and in field plots.

Absorption and nutrient concentration in apple (Pyrus mains L.)

In order to obtain the following informations: a) dry matter production and extraction of nutrients by the fruits at different ages; b) dry matter production and extraction of nutrient by the leaves and "trunk + branches" collected at the flowering stage; c) dry matter production and export of nutrients by pruning (leaves and branches) at the begining dormant stage; A trial was conducted on Latossolo Vermelho Escuro Orto group (Orthox) at Buri, São Paulo State, Brazil. The material was collected from 'Ohio Beauty' and 'Brazil' apples grafted on 'Doucin' 1-2; 3-4; 4-5 and 6-7 years old. The main conclusions were as follows: a) differences were observed on dry matter production by two varieties at the different stages of growth; b) differences were also observed between the two varieties on the matter production in the leaves and "trunk + branches" at the flowering stage, as well as by the leaves and branches pruned at the begining of dormant stages; c) differences were observed betwen the two varieties concerning to nutrient concentration (on dry matter basis) on the fruits collected at different stages of growth. Same results were observed on leaves and "trunk + branches" collected at flowering period; d) differences were observed on the exportation of the nutrients referring to growth period of fruit; e) at the flowering and dormant period, differences were observed on the contents of nutrients in the leaves, 'trunk + branches', on the two varieties; f) the nutrient exportation by the fruits obyed the following order: K>N>P>S>Ca>Mg>Fe>B > Cu > Mn > Zn > Mo; g) the nutrient extration by the aerial part the apple trees obyed the following order: N > K > Ca > Mg > P > S > Fe > B > Cu = Mn = Zn.