Préparation de réseaux organiques covalents monocristallins par polymérisation de composés polynitroso aromatiques.

La construction modulaire est une stratégie émergente qui permet la fabrication de matériaux ordonnés à l’échelle atomique. Elle consiste en l’association programmée de sous-unités moléculaires via des sites réactifs judicieusement sélectionnés. L’application de cette stratégie a d’ores et déjà produit des matériaux aux propriétés remarquables, notamment les réseaux organiques covalents, dans lesquels des atomes de carbone et d’autres éléments légers sont liés de manière covalente. Bien que des matériaux assemblés par des interactions non-covalentes puissent être préparés sous la forme de monocristaux macroscopiques de cette façon, ceci n’était pas possible dans le cas des réseaux organiques covalents. Afin de pallier cette lacune, nous avons choisi d’étudier des réactions de polymérisation réversibles ayant lieu par un mécanisme d’addition. En effet, l’hypothèse de départ de cette thèse suppose qu’un tel processus émule le phénomène de cristallisation classique – régi par des interactions non-covalentes – et favorise la formation de monocristaux de dimensions importantes. Pour tester la validité de cette hypothèse, nous avons choisi d’étudier la polymérisation des composés polynitroso aromatiques puisque la dimérisation des nitrosoarènes est réversible et procède par addition. Dans un premier temps, nous avons revu en profondeur la littérature portant sur la dimérisation des nitrosoarènes. À partir des données alors recueillies, nous avons conçu, dans un deuxième temps, une série de composés polynitroso ayant le potentiel de former des réseaux organiques covalents bi- et tridimensionnels. Les paramètres thermodynamiques propres à leur polymérisation ont pu être estimés grâce à l’étude de composés mononitroso modèles. Dans un troisième temps, nous avons synthétisé les divers composés polynitroso visés par notre étude. Pour y parvenir, nous avons eu à développer une nouvelle méthodologie de synthèse des poly(N-arylhydroxylamines) – les précurseurs directs aux composés polynitroso. Dans un quatrième temps, nous avons étudié la polymérisation des composés polynitroso. En dépit de difficultés d’ordre pratique causées par la polymérisation spontanée de ces composés, nous avons pu identifier les conditions propices à leur polymérisation en réseaux organiques covalents hautement cristallins. Plusieurs nouveaux réseaux covalents tridimensionnels ont ainsi été produits sous la forme de monocristaux de dimensions variant entre 30 µm et 500 µm, confirmant la validité de notre hypothèse de départ. Il a par conséquent été possible de résoudre la structure de ces cristaux par diffraction de rayons X sur monocristal, ce qui n’avait jamais été possible dans le passé pour ce genre de matériau. Ces cristaux sont remarquablement uniformes et les polymères qui les composent ont des masses moléculaires extrêmement élevées (1014-1017 g/mol). Toutefois, la polymérisation de la majorité des composés polynitroso étudiés a plutôt conduit à des solides amorphes ou à des solides cristallins constitués de la forme monomérique de ces composés. D’autres composés nitroso modèles ont alors été préparés afin d’expliquer ce comportement, et des hypothèses ont été émises à partir des données alors recueillies. Enfin, les structures de plusieurs composés polynitroso ayant cristallisés sous une forme monomérique ont été analysés en détails par diffraction des rayons X. Notre stratégie, qui consiste en l’utilisation de monomères ayant la capacité de polymériser spontanément par un processus d’addition réversible, semble donc prometteuse pour obtenir de nouveaux réseaux covalents monocristallins à partir de composés polynitroso ou d’autres monomères de nature similaire. De plus, les résultats présentés au cours de cette thèse établissent un lien entre la science des polymères et la chimie supramoléculaire, en illustrant comment des structures ordonnées, covalentes ou non covalentes, peuvent toutes deux être construites de façon prévisible.

Optical and electrical properties of amorphous zinc tin oxide thin films examined for thin film transistor application

Structural, electronic, and optical properties of amorphous and transparent zinc tin oxide films deposited on glass substrates by pulsed laser deposition (PLD) were examined for two chemical compositions of Zn:Sn=1:1 and 2:1 as a function of oxygen partial pressure PO2 used for the film deposition and annealing temperature. Different from a previous report on sputter-deposited films Chiang et al., Appl. Phys. Lett. 86, 013503 2005 , the PLD-deposited films crystallized at a lower temperature 450 °C to give crystalline ZnO and SnO2 phases. The optical band gaps Tauc gaps were 2.80−2.85 eV and almost independent of oxygen PO2 , which are smaller than those of the corresponding crystals 3.35−3.89 eV . Films deposited at low PO2 showed significant subgap absorptions, which were reduced by postthermal annealing. Hall mobility showed steep increases when carrier concentration exceeded threshold values and the threshold value depended on the film chemical composition. The films deposited at low PO2 2 Pa had low carrier concentrations. It is thought that the low PO2 produced high-density oxygen deficiencies and generated electrons, but these electrons were trapped in localized states, which would be observed as the subgap absorptions. Similar effects were observed for 600 °C crystallized films and their resistivities were increased by formation of subgap states due to the reducing high-temperature condition. High carrier concentrations and large mobilities were obtained in an intermediate PO2 region for the as-deposited films.

Optical and electrical properties of co-sputtered amorphous transparent conducting zinc indium tin oxide thin films

Highly conductive and transparent thin films of amorphous zinc indium tin oxide are prepared at room temperature by co-sputtering of zinc 10 oxide and indium tin oxide. Cationic contents in the films are varied by adjusting the power to the sputtering targets. Optical transmission study of 11 films showed an average transmission greater than 85% across the visible region. Maximum conductivity of 6×102 S cm−1 is obtained for Zn/In/ 12 Sn atomic ratio 0.4/0.4/0.2 in the film. Hall mobility strongly depends on carrier concentration and maximum mobility obtained is 18 cm2 V−1 s−1 13 at a carrier concentration of 2.1×1020 cm−3. Optical band gap of films varied from 3.44 eV to 3 eV with the increase of zinc content in the film 14 while the refractive index of the films at 600 nm is about 2.0.

Carbon nanotubes induced crystallization of poly(ethylene terephthalate)

We have investigated the crystallization characteristics of melt compounded nanocomposites of poly(ethylene terephthalate) (PET) and single walled carbon nanotubes (SWNTs). Differential scanning calorimetry studies showed that SWNTs at weight fractions as low as 0.03 wt% enhance the rate of crystallization in PET, as the cooling nanocomposite melt crystallizes at a temperature 10 °C higher as compared to neat PET. Isothermal crystallization studies also revealed that SWNTs significantly accelerate the crystallization process. WAXD showed oriented crystallization of PET induced by oriented SWNTs in a randomized PET melt, indicating the role of SWNTs as nucleating sites.

Carbon Nanotubes-Reinforced PET Nanocomposite by Melt-Compounding

Poly(ethylene terephthalate) (PET) nanocomposites with single-walled carbon nanotubes (SWNTs) have been prepared by a simple melt compounding method. With increasing concentration (0-3 wt %) of SWNTs, the mechanical and dynamic mechanical properties improved, corresponding to effective reinforcement. Melt rheological characterization indicated the effective entanglements provided by SWNTs in the melt state as well. Thermogravimetric analysis suggested no influence of SWNTs on the thermal stability of PET. Electrical conductivity measurements on the composite films pointed out that the melt compounded SWNTs can result in electrical percolation albeit at concentrations exceeding 2 wt %.

Synergism of Xanthate/Dithiocarbamate Accelerator in Carbon Black Filled NR Compounds

Zinc salts of ethyl, isopropyl and butyl xanthates were prepared in the laboratory. The effect of these xanthates with zinc diethyldithiocarbamate (ZDC) on the vulcanization of HAF filled NR compound has been studied at different temperatures. The rubber compounds with the three xanthate accelerators and ZDC were cured at various temperatures from 60°C to 150°C. The sheets were moulded and properties such as tensile strength , tear strength , cross-link density, elongation -at-break, compression set, heat build up, abrasion resistance, flex resistance , etc. were evaluated . The properties showed that zinc xanthate/ZDC accelerator combination has a positive synergistic effect on the mechanical properties of NR compounds. The curing of HAF filled NR compound containing zinc xanthate /ZDC is slightly slower than the curing of the corresponding gum compounds . It is observed that, by gradually increasing the amount of the accelerator, the cure time of black filled NR compound can be made equal to that of the gum compou

Studies on Latex Stage Carbon Black Masterbatching of NR and its Blend with SBR

Carbon Black is incorporated In natural rubber latex in , the presence of polyethylene glycol. The dispersion of carbon blade in the vulcanizatea is analyzed using polaroid M.4 land camera The mechanical properties of the carbon black meeterbatched NR/SBR blend Is compared with that of conventional NR/SBR blend before and after ageing , The resilience, flex resistance and hardness are found to be superior for N-LCMISBR compounds. The compression set and abrasion resistance are comparable for both types of blends . The processebiity and die swell of these blends at different shear rates are also compared.

Studies on Magnetic Iron Oxide Loaded Activated Carbon

The current water treatment technology is oriented towards the removal of contaminants, mostly organic compounds, by activated carbon. Activated carbons are classified as Granular Activated Carbons (GAC) and Powdered Activated Carbons (PAC) on the basis of the particle size of the carbon granules. Powdered carbons are generally less expensive than granular carbon, operating costs with powdered carbon could be lower. Though powdered activated carbon has many advantages over granular carbon, its application in large-scale separation process is limited by difficulty in recovery and regeneration. Deposition of magnetic iron oxide on carbon particles provides a convenient way of recovering the spent carbon from process water. The study deals with the preparation and physico-chemical characterization of magnetic iron oxide loaded activated carbons. The evaluation of absorption properties of magnetic iron oxide loaded activated carbon composites. The target molecules studied were phenol, p-nitro phenol and methylene blue. The feasibility of magnetic separation of iron oxide loaded activated carbons were studied and described in this thesis.

Optical absorption studies in ion implanted and amorphous semiconductors - Investigations in some tetrahedrally co-ordinated and chalcogenide materials

The thesis provides an overall review and introduction to amorphous semiconductors, followed by a brief discussion on the important structural models proposed for chalcogenide glasses and their electrical, optional and thermal properties. It also gives a brief description of the Physics of thin films, ion implantation and Photothermal Deflection Spectroscopy. A brief description of the experimental setup of a photothermal deflection spectrometer and the details of the preparation and optical characterization of the thin film samples. It deals with the employment of the subgap optional absorption measurement by PDS to characterize the defects, amorphization and annealing behavior in silicon implanted with B+ ions and the profiles of ion range and vacancy distribution obtained by the TRIM simulation. It reports the results of all absorption measurements by PDS in nitrogen implanted thin film samples of Ge-Se and As-Se systems

Microwave Absorbing Material Using Rubber & Carbon

Development of a new type of microwave absorbing material using rubber latex and carbon. for application in the interior lining of anechoic chambers, has been reported. Absorption coefficients of different combinations were estimated at X and S bands and the results were presented graphically. A combination of 50% rubber latex, 40% carbon and 10% graphite is found to form an ideal microwave absorbing material in the X and s bands

Optical emission studies of C2 species in laser-produced plasma from carbon

Optical emission studies of C2 molecules in plasma obtained by Nd:YAG laser ablation of graphite in a helium atmosphere are reported for irradiances in the range (1–9:2/ x 1010 W cm−2. The characteristics of the spectral emission intensity from the C2 (Swan band) species have been investigated as functions of the distance from the target, ambient pressure and laser irradiance. Estimates of vibrational temperatures of C2 species under various irradiance conditions are made. Results of measurements performed under different ambient helium gas pressures are also discussed.

Optical emission studies of C2 species in laser-produced plasma from carbon

Optical emission studies of C2 molecules in plasma obtained by Nd:YAG laser ablation of graphite in a helium atmosphere are reported for irradiances in the range (1–9:2/ x 1010 W cm−2. The characteristics of the spectral emission intensity from the C2 (Swan band) species have been investigated as functions of the distance from the target, ambient pressure and laser irradiance. Estimates of vibrational temperatures of C2 species under various irradiance conditions are made. Results of measurements performed under different ambient helium gas pressures are also discussed.