Prototype Generation from Ontology Charts

Semantic Analysis is a business analysis method designed to capture system requirements. While these requirements may be represented as text, the method also advocates the use of Ontology Charts to formally denote the system's required roles, relationships and forms of communication. Following model driven engineering techniques, Ontology Charts can be transformed to temporal Database schemas, class diagrams and component diagrams, which can then be used to produce software systems. A nice property of these transformations is that resulting system design models lend themselves to complicated extensions that do not require changes to the design models. For example, resulting databases can be extended with new types of data without the need to modify the database schema of the legacy system. Semantic Analysis is not widely used in software engineering, so there is a lack of experts in the field and no design patterns are available. This make it difficult for the analysts to pass organizational knowledge to the engineers. This study describes an implementation that is readily usable by engineers, which includes an automated technique that can produce a prototype from an Ontology Chart. The use of such tools should enable developers to make use of Semantic Analysis with minimal expertise of ontologies and MDA.

Photochemical Generation and Intramolecular Chemistry of β-Alkoxycarbenes

The photolytic phenanthrene-based precursors for both β-methoxycarbene and β-ethoxycarbene were synthesized with and without a deuterium label attached to the a carbon. The incorporation of this deuterium label allowed distinction between a 1, 2-H shift and a 1, 2-O shift pathway to the respective alkyl vinyl ether, without the influence of a primary kinetic isotope effect. Photolyses of these precursors gave rearrangement products of the expected β-alkoxycarbenes. In the case of β-methoxycarbene, no methyl vinyl ether was observed due to its volatility. However, the appearance of aldehyde peaks in the NMR spectra, from an apparent further rearrangement to acetaldehyde through an enol intermediate, indicated that a 1,2-H shift had occurred. Ethyl vinyl ether was isolated following the photolysis of the β-ethoxycarbene precursor. Quantification of the two pathways showed less than 2% undergoing an ethoxy shift to the ethyl vinyl ether. Yield experiments on this photolysis demonstrated a maximum yield of β-ethoxycarbene as 43%, though this decreased as the experiment continued. Computational work on the β-ethoxycarbene system indicates that the triplet scate is more stable than the singlet. In addition, the activation energy to the 1.2-H shift pathway is remarkably low and is clearly consistent with the observed overwhelming preference for this pathway in the experiment.

Meteomap: Generation Of Meteorological Variables For Distributed Physically-Based Hydrological Modeling

Distributed energy and water balance models require time-series surfaces of the meteorological variables involved in hydrological processes. Most of the hydrological GIS-based models apply simple interpolation techniques to extrapolate the point scale values registered at weather stations at a watershed scale. In mountainous areas, where the monitoring network ineffectively covers the complex terrain heterogeneity, simple geostatistical methods for spatial interpolation are not always representative enough, and algorithms that explicitly or implicitly account for the features creating strong local gradients in the meteorological variables must be applied. Originally developed as a meteorological pre-processing tool for a complete hydrological model (WiMMed), MeteoMap has become an independent software. The individual interpolation algorithms used to approximate the spatial distribution of each meteorological variable were carefully selected taking into account both, the specific variable being mapped, and the common lack of input data from Mediterranean mountainous areas. They include corrections with height for both rainfall and temperature (Herrero et al., 2007), and topographic corrections for solar radiation (Aguilar et al., 2010). MeteoMap is a GIS-based freeware upon registration. Input data include weather station records and topographic data and the output consists of tables and maps of the meteorological variables at hourly, daily, predefined rainfall event duration or annual scales. It offers its own pre and post-processing tools, including video outlook, map printing and the possibility of exporting the maps to images or ASCII ArcGIS formats. This study presents the friendly user interface of the software and shows some case studies with applications to hydrological modeling.

The Generation Gap: What Generation Gap? : Management, Technology, Training, and Evolving Skills

Contrary to divisive labels to describe generations, members of different age groups have much to teach each other: Younger workers bring fresh perspectives to old issues, while older workers' valuable organizational history help inform current contexts. All age groups in the workplace benefit in learning from each other's perspectives.

Acquisitions: The Next Generation

This article reviews a broad range of trends and concerns regarding the recruitment, training, and retention of acquisitions librarians. The survey of trends benefits library educators and students, members of search commillees seeking to fill acquisitions vacancies, and working acquisitions librarians.

Next-Generation Advising: Elevating Practice for Degree Completion and Career Success

As competition for applicants, legislative focus on graduation rates, and questions about the lifetime value of a degree intensify, many institutions are blurring boundaries between academic advising and co-curricular and career advising to promote student success and differentiate brand. This report examines how leaders break the trade-off between high-touch service and budget realities, identifying breakthrough practices, as well as the models and technologies required to deliver them in a cost-effective manner.

Tapping into your people: successfully managing idea generation in organisations

Over the past few years, innovation has increasingly garnered the headlines as one of the core competencies every sustainable organisation must have. Yet, it is the idea which is the foundation of any innovation. This paper draws together knowledge about idea generation, and its management, and how the process of encouraging ideas, creativity and then managing them effectively will enhance the opportunities of successfully finding and implementing innovations which will add value to the organisation and its stakeholders. Extensive review of literature in the field of idea and innovation management, as well as a study of Souza Cruz¿s recently conceptualised and implemented Idea Management programme has brought together the many facets involved in successfully harnessing and implementing ideas.

Automatic layout generation of static CMOS circuits targeting delay and power

The evolution of integrated circuits technologies demands the development of new CAD tools. The traditional development of digital circuits at physical level is based in library of cells. These libraries of cells offer certain predictability of the electrical behavior of the design due to the previous characterization of the cells. Besides, different versions of each cell are required in such a way that delay and power consumption characteristics are taken into account, increasing the number of cells in a library. The automatic full custom layout generation is an alternative each time more important to cell based generation approaches. This strategy implements transistors and connections according patterns defined by algorithms. So, it is possible to implement any logic function avoiding the limitations of the library of cells. Tools of analysis and estimate must offer the predictability in automatic full custom layouts. These tools must be able to work with layout estimates and to generate information related to delay, power consumption and area occupation. This work includes the research of new methods of physical synthesis and the implementation of an automatic layout generation in which the cells are generated at the moment of the layout synthesis. The research investigates different strategies of elements disposition (transistors, contacts and connections) in a layout and their effects in the area occupation and circuit delay. The presented layout strategy applies delay optimization by the integration with a gate sizing technique. This is performed in such a way the folding method allows individual discrete sizing to transistors. The main characteristics of the proposed strategy are: power supply lines between rows, over the layout routing (channel routing is not used), circuit routing performed before layout generation and layout generation targeting delay reduction by the application of the sizing technique. The possibility to implement any logic function, without restrictions imposed by a library of cells, allows the circuit synthesis with optimization in the number of the transistors. This reduction in the number of transistors decreases the delay and power consumption, mainly the static power consumption in submicrometer circuits. Comparisons between the proposed strategy and other well-known methods are presented in such a way the proposed method is validated.

Cultura de anteras e embriogênese de genótipos selecionados de cevada (Hordeum vulgare L.ssp.vulgare)

A eficiência da técnica de cultura de anteras, em escala comercial, ainda pode ser considerada baixa quando medida em número de plantas duplo-haplóides férteis obtidas para cada antera estabelecida in vitro. Dessa forma, o presente trabalho é pioneiro no estudo detalhado da embriogênese in vitro do micrósporo e do grão de pólen de cevada (Hordeum vulgare L. ssp. vulgare). Com o objetivo de contribuir para o aperfeiçoamento da técnica de cultura de anteras foi analisada a embriogênese, com especial ênfase na etapa da indução, através de análises citológicas e histológicas de anteras cultivadas in vitro. Foram analisadas uma cultivar brasileira de cevada, em comparação com linhagens de duas outras cultivares brasileiras, que foram selecionadas, por seleção divergente para maior ou para menor resposta na indução da rota embriogênica e, respectivamente, para menor ou para maior capacidade de regenerar plântulas verdes. Somente foram estabelecidas em cultivo in vitro as anteras que apresentaram micrósporos e pólens jovens, das linhagens selecionadas da cultivar A-05 (S3A22 e S3A23), e da cultivar BR-2(S3B63 e, apenas na cultura de anteras, S3B61), bem como da cultivar MN-599 (nãoselecionada). Para as análises histológicas, foram fixadas, a cada dois dias, duas anteras, correspondentes a cada fileira da mesma espiga, após o início do cultivo in vitro. As anteras em cultivo e respectivas estruturas multicelulares foram fixadas em FAA 50%, desidratadas em série etílica e incluídas em hidroxietilmetacrilato. Os blocos de resina polimerizada foram secionados longitudinalmente com 3 mm de espessura. Para as análises citológicas foram fixadas, de cada espiga recém-coletada, três espiguetas sendo uma da base, outra do meio e outra do ápice. Após o pré-tratamento à baixa temperatura (5 °C), porém antes do cultivo in vitro, foram fixadas três anteras (amostras utilizadas como controles). A cada três dias, durante o cultivo, três anteras foram fixadas (até 18 dias). As anteras em cultivo e estruturas multicelulares foram fixadas em Farmer e FAA 50%, transferidas após 24 horas para etanol 70%. Na cultura in vitro das anteras houve diferenças entre uma das linhagens da cultivar A-05 em relação a cultivar MN- 599, na produção inicial de estruturas embriogênicas, diferença que desapareceu na produção total. Entretanto, houve diferenças na formação dos xiii embriões: a cv.MN-599 formou embriões bem diferenciados ao passo que a linhagem S3A22 produziu um número aparentemente menor, sendo que os embriões não eram bem diferenciados. A linhagem S3B63 não apresentou embriões até o final da análise histológica. Considerando que a amostra dessa linhagem, mantida em cultura, formou plantas verdes, pode-se propor que a formação de embriões deve ocorrer posteriormente ao desenvolvimento da cv.MN-599. Cabe destacar que houve diferenças significativas entre as cultivares A-05 e BR-2 quanto à regeneração de plântulas verdes. Esses resultados indicam ter havido maior eficiência da seleção em relação à etapa da regeneração. Com relação às categorias classificatórias dos micrósporos e grãos de pólen, constatou-se que desde o início da análise histológica (2o dia de cultivo in vitro) até o final (34o dia), foram observados micrósporos, o mesmo tendo sido observado na análise citológica. Os grãos de pólen multinucleados ocorreram praticamente em todo o período de cultivo in vitro, em ambas análises; não ocorrendo nos controles da citologia (antes do cultivo); os multinucleados foram observados a partir do 3o dia, enquanto que os multicelulares a partir do 4o dia de cultivo. As estruturas multicelulares foram observadas a partir do 8o dia. A quantidade e o tamanho das estruturas multicelulares foram variáveis ao longo da análise histológica, sendo que do 14o ao 20o dia foram encontradas as de maiores dimensões, resultantes da proliferação celular por mitoses sucessivas. A partir do 22o dia (cultivar MN- 599), a ocorrência de estruturas multicelulares no interior dos lóculos da antera diminuiu, predominando o processo de proliferação externo às anteras. Para as linhagens, a partir do 18o dia foram observadas estruturas multicelulares liberadas das anteras. A análise das estruturas multicelulares permitiu classificá-las em quatro categorias: 1. SFD: Sem forma definida; 2. MAC: meristema apical caulinar; 3. MAR: meristema apical radical embrionário adventício; e 4. Embriões. As estruturas amorfas apareceram em maior número, quando comparadas com as outras categorias. Em síntese: as linhagens selecionadas e a cultivar diferiram não apenas no tempo necessário para a formação dos embriões, mas também no desenvolvimento dos mesmos, que foi mais diferenciado na cultivar MN-599, porém sendo observados mais cedo na linhagem S3A22 e S3A23, do que na cultivar MN-599.

Exploring different social media users from the millennials’ generation: a cross-cultural behavioral analysis of brazilian users of Facebook and chinese users of RenRen

With the increasing importance of digital communication and its distinct characteristics, marketing tools and strategies adopted by companies have changed dramatically. Among the many digital marketing tools and new media channels available for marketers, the phenomenon known as social media is one of the most complex and enigmatic. It has a range that still is quite unexplored and deeply transforms the present view on the promotion mix (Mangold & Faulds, 2009). Conversations among users on social media directly affect their perceptions on products, services and brands. But more than that, a wide range of other subjects can also become topics of conversations on social media. Hit songs, sporting events, celebrity news and even natural disasters and politics are topics that often become viral on the web. Thus, companies must grasp that, and in order to become more interesting and relevant, they must take part in these conversations inserting their brands in these online dynamic dialogues. This paper focuses on how these social interactions are manifested in the web in to two distinct cultures, Brazil and China. By understanding the similarities and differences of these cultures, this study helps firms to better adjust its marketing efforts across regions, targeting and positioning themselves, not only geographically and culturally, but also across different web platforms (Facebook and RenRen). By examining how companies should focus their efforts according to each segment in social media, firms can also maximize its results in communication and mitigate risks. The findings suggest that differences in cultural dimensions in these two countries directly affect their virtual social networking behavior in many dimensions (Identity, Presence, Relationships, Reputation, Groups, Conversations and Sharing). Accordingly, marketing efforts must be tailored to each comportment and expectations.

Organizational modeling with a semantic wiki: formalization of content and automatic diagram generation

A key to maintain Enterprises competitiveness is the ability to describe, standardize, and adapt the way it reacts to certain types of business events, and how it interacts with suppliers, partners, competitors, and customers. In this context the field of organization modeling has emerged with the aim to create models that help to create a state of self-awareness in the organization. This project's context is the use of Semantic Web in the Organizational modeling area. The Semantic Web technology advantages can be used to improve the way of modeling organizations. This was accomplished using a Semantic wiki to model organizations. Our research and implementation had two main purposes: formalization of textual content in semantic wiki pages; and automatic generation of diagrams from organization data stored in the semantic wiki pages.

DEMO models based automatic workflow process generation

Nowadays, more than half of the computer development projects fail to meet the final users' expectations. One of the main causes is insufficient knowledge about the organization of the enterprise to be supported by the respective information system. The DEMO methodology (Design and Engineering Methodology for Organizations) has been proved as a well-defined method to specify, through models and diagrams, the essence of any organization at a high level of abstraction. However, this methodology is platform implementation independent, lacking the possibility of saving and propagating possible changes from the organization models to the implemented software, in a runtime environment. The Universal Enterprise Adaptive Object Model (UEAOM) is a conceptual schema being used as a basis for a wiki system, to allow the modeling of any organization, independent of its implementation, as well as the previously mentioned change propagation in a runtime environment. Based on DEMO and UEAOM, this project aims to develop efficient and standardized methods, to enable an automatic conversion of DEMO Ontological Models, based on UEAOM specification into BPMN (Business Process Model and Notation) models of processes, using clear semantics, without ambiguities, in order to facilitate the creation of processes, almost ready for being executed on workflow systems that support BPMN.