The Interaction of the Calcium Sensitiser Levosimendan with Cardiac Troponin C

Cardiac failure is one of the leading causes of mortality in developed countries. As life expectancies of the populations of these countries grow, the number of patients suffering from cardiac insufficiency also increase. Effective treatments including the use of calcium sensitisers are being sought. They cause a positive inodilatory effect on cardio-myocytes without deleterious effects (arrhythmias) resulting from increases in intracellular calcium concentration. Levosimendan is a novel calcium sensitiser that hasbeen proved to be a welltolerated and effective treatment for patients with severe decompensated heart failure. Cardiac troponin C (cTnC) is its target protein. However, there have been controversies about the interactions between levosimendan and cTnC. Some of these controversies have been addressed in this dissertation. Furthermore, studies on the calcium sensitising mechanism based on the interactions between levosimendan and cTnC as followed by nuclear magnetic resonance(NMR) are presented and discussed. Levosimendan was found to interact with bothdomains of the calcium-saturated cTnC in the absence of cardiac troponin I (cTnI). In the presence of cTnI, the C-domain binding site was blocked and levosimendan interacted only with the regulatory domain of cTnC. This interaction may have caused the observed calcium sensitising effect by priming the N-domain for cTnI binding thereby extending the lifetime of that complex. It is suggested that this is achieved by shifting the equilibrium between open and closed conformations.

Pienen matkailuyrityksen yrittäjän taival : Oppiminen yrittäjyysprosessissa

Tämä tutkimus liittyy keskusteluun yrittäjyydestä, strategisesta prosessista ja kasvunmerkityksestä pienissä yrityksissä ja edelleen keskusteluun yrittäjästä oppijana, tilaisuuteen tarttujana ja toisaalta elämäntapaansa vaalivana yksilönä. Yrittäjän oppiminen on liitettävissä keskusteluun oppimisesta organisaatioissa, mikä tässä ymmärretään yrittäjän, yksilön oppimisena ja mahdollisuutena innovointiin ja uusiutumiseen yrittäjyysprosessissa. Tutkimuksen tavoitteena on etsiä yrittäjän oppimisen tapoja ja tuotoksia, roolia ja merkitystä strategisessa liiketoimintaprosessissa, jossa yrittäjän arvot ja pienen matkailu- ja perheyrityksen kulttuuri ohjaavat yrittäjän toimintatapaa. Edelleen tavoitteena on hahmottaa yrittäjän oppimisen ja kompetenssin ilmenemistä muutoksissa ja sidosryhmäsuhteissa. Työn lähestymistapa on hermeneuttinen. Yrittäjää lähestytään kokonaisvaltaisena yksilönä näkökulmasta, jossa yrittäjyyden prosessi ymmärretään inhimillisenä ja luovana toimintana sekä jatkuvana muutoksena. Yrittäjä nähdään oman prosessinsa määrittäjänä ja parhaana asiantuntijana. Empiirinen aineisto on laadullista. Vanhatyrittäjähaastatteluin vuosina 1998 - 99 kerätyt aineistot tarjosivat kokeilumahdollisuuden aineiston analysoinnin aloittamiseksi. Aineistojen kapean näkökulmanlaajentamiseksi kerättiin lisäaineisto neljältä yrittäjältä keskusteluin vuonna2003. Tämä Itä-Suomessa matkailualan yrittäjiltä kerätty uusi aineisto muodostaa tämän tutkimuksen keskeisen aineiston. Yrittäjyyden aiemmasta tutkimuksesta nousseet näkökulmat ovat suunnanneet tämän työn empiirisen aineiston tarkastelua. Tarkastelun kohteena ovat yrittäjä oppijana yrittäjyysprosessissaan ja yrittäjähistoriansa taitekohdissa sekä oppimisen näkyminen yrittäjän arvomaailmassa, matkailuyrityksen kulttuurissa ja sidosryhmäyhteistyössä. Tutkimuksen tulokset osoittavat, että yrittäjille jatkuva muutos on arkipäiväistä työtä. Yrittäjät hallitsevat omaa oppimis- ja yrittäjyysprosessiaan. He asettavat itse tavoitteensa liiketoiminnan suhteen, ymmärtävät liiketaloudellisia realiteetteja riittävästi; erityisesti riskien hallinta on ominaista yrittäjille. Yritysten menestystä osoittaa se, että niissä on pystytty kasvattamaan toimintaa määrällisten mittareiden puitteissa tai ainakin yrittäjän omiin tavoitteisiin on päästy. Yrittäjien oppimis- ja uusiutumiskykyä todistaa yritysten olemassaolo sinänsä ja jatkuva olemassaolon kamppailu vaikuttamalla sidosryhmiin. Vaikka näitä yrittäjiä ei anglosaksisen, schumpeterilaisen määrittelytavan mukaan voida määritellä käsitteellä 'entrepreneur', voidaan kuitenkin väittää, että heidät voidaan ymmärtää 'yrittäjyys' yrittäjiksi - rohkeiksi, uteliaiksi, itsenäisiksi, oppiviksi ja jatkuvasti uusiutuviksi yksilöiksi, jotka luovat jatkuvasti uutta arvoa yritystoiminnallaan. Oppiminen ilmenee prosessissa niin, että yrittäjät hakevat uutta tietoa sosiaalisesta suhdeverkostostaan, asiakkaiden käyttäytymisestä ja reaktioista sekä havainnoivatympäristöään tarkasti tehden vertailuja oman yrityksenä näkökulmasta alan muihin yrityksiin ja toimivat yhteistyössä muiden yrittäjien kanssa. He kyseenalaistavat omaa ja yrityksensä toimintaa, laativat suunnitelmia yrityksen laajentamiseksi tai toimintojen lisäämiseksi, mutta myös toiminnoista luopumiseksi. Oppiminenja uusiutuminen näkyvät visioissa, joissa yritystoimintaa varaudutaan muuttamaan siten, että se vastaa kulloisenkin tilanteen vaatimuksia Kuitenkin yrittäjät ovat ymmärrettävissä toimintaa ennakoiviksi, eivät niinkään toimintaa sopeuttaviksi yksilöiksi. Ennakointi voidaan nähdä muutosten työntövoimana, jolloin yrittäjät ovat enemmänkin yritystensä eteenpäin työntäjiä kuin yritystensä vetäjiä. Yrittäjät ovat omissa yrityksissään paras mahdollinen kyvykkyys- ja osaamisresurssi, joka näyttää siirtyvän näissä yrityksissä myös seuraavan sukupolven käyttöön käytännön esimerkkien ja hiljaisen tiedon kautta. Jokaiselle yrittäjälle on muotoutunut oma selviytymisstrategiansa tai toimintamallinsa, jossa on nähtävissä yrittäjän koko yrittäjyyden historian aikana ja yrittäjyysprosessissa tapahtuvan oppimisen muotoutuminen yrittäjän osaamiseksi. Näissä selviytymisstrategioissa on havaittavissa yrittäjän oma arvokäsitys, perheyrityksen kulttuuri, suhtautumistapa ympäristöön ja yrittäjän oma, persoonallinen toimintatapa yrittäjänä.

Theoretical and numerical study of thermomagnetic convection in magnetic fluids

In this thesis, the magnetic field control of convection instabilities and heat and mass transfer processesin magnetic fluids have been investigated by numerical simulations and theoretical considerations. Simulation models based on finite element and finite volume methods have been developed. In addition to standard conservation equations, themagnetic field inside the simulation domain is calculated from Maxwell equations and the necessary terms to take into account for the magnetic body force and magnetic dissipation have been added to the equations governing the fluid motion.Numerical simulations of magnetic fluid convection near the threshold supportedexperimental observations qualitatively. Near the onset of convection the competitive action of thermal and concentration density gradients leads to mostly spatiotemporally chaotic convection with oscillatory and travelling wave regimes, previously observed in binary mixtures and nematic liquid crystals. In many applications of magnetic fluids, the heat and mass transfer processes including the effects of external magnetic fields are of great importance. In addition to magnetic fluids, the concepts and the simulation models used in this study may be applied also to the studies of convective instabilities in ordinary fluids as well as in other binary mixtures and complex fluids.

Project Success through Effective Decisions: Case Studies on Project Goal Setting, Success Evaluation and Managerial Decision Making

The objective of the thesis is to structure and model the factors that contribute to and can be used in evaluating project success. The purpose of this thesis is to enhance the understanding of three research topics. The goal setting process, success evaluation and decision-making process are studied in the context of a project, business unitand its business environment. To achieve the objective three research questionsare posed. These are 1) how to set measurable project goals, 2) how to evaluateproject success and 3) how to affect project success with managerial decisions.The main theoretical contribution comes from deriving a synthesis of these research topics which have mostly been discussed apart from each other in prior research. The research strategy of the study has features from at least the constructive, nomothetical, and decision-oriented research approaches. This strategy guides the theoretical and empirical part of the study. Relevant concepts and a framework are composed on the basis of the prior research contributions within the problem area. A literature review is used to derive constructs of factors withinthe framework. They are related to project goal setting, success evaluation, and decision making. On the basis of this, the case study method is applied to complement the framework. The empirical data includes one product development program, three construction projects, as well as one organization development, hardware/software, and marketing project in their contexts. In two of the case studiesthe analytic hierarchy process is used to formulate a hierarchical model that returns a numerical evaluation of the degree of project success. It has its origin in the solution idea which in turn has its foundation in the notion of projectsuccess. The achieved results are condensed in the form of a process model thatintegrates project goal setting, success evaluation and decision making. The process of project goal setting is analysed as a part of an open system that includes a project, the business unit and its competitive environment. Four main constructs of factors are suggested. First, the project characteristics and requirements are clarified. The second and the third construct comprise the components of client/market segment attractiveness and sources of competitive advantage. Together they determine the competitive position of a business unit. Fourth, the relevant goals and the situation of a business unit are clarified to stress their contribution to the project goals. Empirical evidence is gained on the exploitation of increased knowledge and on the reaction to changes in the business environment during a project to ensure project success. The relevance of a successful project to a company or a business unit tends to increase the higher the reference level of project goals is set. However, normal performance or sometimes performance below this normal level is intentionally accepted. Success measures make project success quantifiable. There are result-oriented, process-oriented and resource-oriented success measures. The study also links result measurements to enablers that portray the key processes. The success measures can be classified into success domains determining the areas on which success is assessed. Empiricalevidence is gained on six success domains: strategy, project implementation, product, stakeholder relationships, learning situation and company functions. However, some project goals, like safety, can be assessed using success measures that belong to two success domains. For example a safety index is used for assessing occupational safety during a project, which is related to project implementation. Product safety requirements, in turn, are connected to the product characteristics and thus to the product-related success domain. Strategic success measures can be used to weave the project phases together. Empirical evidence on their static nature is gained. In order-oriented projects the project phases are oftencontractually divided into different suppliers or contractors. A project from the supplier's perspective can represent only a part of the ¿whole project¿ viewed from the client's perspective. Therefore static success measures are mostly used within the contractually agreed project scope and duration. Proof is also acquired on the dynamic use of operational success measures. They help to focus on the key issues during each project phase. Furthermore, it is shown that the original success domains and success measures, their weights and target values can change dynamically. New success measures can replace the old ones to correspond better with the emphasis of the particular project phase. This adjustment concentrates on the key decision milestones. As a conclusion, the study suggests a combination of static and dynamic success measures. Their linkage to an incentive system can make the project management proactive, enable fast feedback and enhancethe motivation of the personnel. It is argued that the sequence of effective decisions is closely linked to the dynamic control of project success. According to the used definition, effective decisions aim at adequate decision quality and decision implementation. The findings support that project managers construct and use a chain of key decision milestones to evaluate and affect success during aproject. These milestones can be seen as a part of the business processes. Different managers prioritise the key decision milestones to a varying degree. Divergent managerial perspectives, power, responsibilities and involvement during a project offer some explanation for this. Finally, the study introduces the use ofHard Gate and Soft Gate decision milestones. The managers may use the former milestones to provide decision support on result measurements and ad hoc critical conditions. In the latter milestones they may make intermediate success evaluation also on the basis of other types of success measures, like process and resource measures.

Information sharing in R&D collaboration - Context-dependency and means of governance

Tiedon jakaminen ja kommunikointi ovat tärkeitä toimintoja verkostoituneiden yritysten välillä ja ne käsitetäänkin yhteistyösuhteen yhtenä menestystekijänä ja kulmakivenä. Tiedon jakamiseen liittyviä haasteita ovat mm. yrityksen liiketoiminnalle kriittisen tiedon vuotaminen ja liiketoiminnan vaatima tiedon reaaliaikaisuus ja riittävä määrä. Tuotekehitysyhteistyössä haasteellista on tiedon jäsentymättömyys ja sitä kautta lisääntyvä tiedon jakamisen tarve, minkä lisäksi jaettava tieto on usein monimutkaista ja yksityiskohtaista. Lisäksi tuotteiden elinkaaret lyhenevät, ja ulkoistaminen ja yhteistyö ovat yhä kasvavia trendejä liiketoiminnassa. Yhdessä nämä tekijät johtavat siihen, että tiedon jakaminen on haastavaa eritoten verkostoituneiden yritysten välillä. Tässä tutkimuksessa tiedon jakamisen haasteisiin pyrittiin vastaamaan ottamalla lähtökohdaksi tiedon jakamisen tilanneriippuvuuden ymmärtäminen. Työssä vastattiin kahteen pääkysymykseen: Mikä on tiedon jakamisen tilanneriippuvuus ja miten sitä voidaan hallita? Tilanneriippuvuudella tarkoitetaan työssä niitä tekijöitä, jotka vaikuttavat siihen, miten yritys jakaa tietoa tuotekehityskumppaneidensa kanssa. Tiedon jakamisella puolestaan tarkoitetaan yrityksestä toiselle siirrettävää tietoa, jota tarvitaan tuotekehitysprojektin aikana. Työn empiirinen aineisto on kerätty laadullisella tutkimusotteella case- eli tapaustutkimuksena yhdessä telekommunikaatioalan yrityksessä jasen eri liiketoimintayksiköissä. Tutkimusjoukko käsitti 19 tuotekehitys- ja toimittajanhallintatehtävissä toimivaa johtajaa tai päällikköä. Työ nojaa pääasiassa hankintojen johtamisen tutkimuskenttään ja tilanneriippuvuuden selvittämiseksi paneuduttiin erityisesti verkostojen tutkimukseen. Työssä kuvattiin tiedon jakaminen yhtenä verkoston toimintona ja yhteistyöhön liittyvättiedon jakamisen hyödyt, haasteet ja riskit identifioitiin. Tämän lisäksi työssä kehitettiin verkoston tutkimismalleja ja yhdistettiin eri tasoilla tapahtuvaa verkoston tutkimusta. Työssä esitettiin malli verkoston toimintojen tutkimiseksija todettiin, että verkostotutkimusta pitäisi tehdä verkosto, ketju, yrityssuhde- ja yritystasolla. Malliin on myös hyvä yhdistää tuote- ja tehtäväkohtaiset ominaispiirteet. Kirjallisuuskatsauksen perusteella huomattiin, että tiedon jakamista on aiemmin tarkasteltu lähinnä tuote- ja yrityssuhteiden tasolla. Väitöskirjassa esitettiin lisää merkittäviä tekijöitä, jotka vaikuttavat tiedon jakamiseen. Näitä olivat mm. tuotekehitystehtävän luonne, teknologia-alueen kypsyys ja toimittajan kyvykkyys. Tiedon jakamisen luonnetta tarkasteltaessa erotettiin operatiivinen, projektin hallintaan ja tuotekehitykseen liittyvä tieto sekä yleinen, toimittajan hallintaan liittyvä strateginen tieto. Tulosten mukaan erityisesti tuotekehityksen määrittelyvaihe ja tapaamiset kasvotusten korostuivat yhteistyössä. Empirian avulla tutkittiin myös niitä tekijöitä, joilla tiedon jakamista voidaan hallita tilanneriippuvuuteen perustuen, koska aiemmin tiedon jakamisen hallintakeinoja tai menestystekijöitä ei ole liitetty suoranaisesti eri olosuhteisiin. Nämä hallintakeinot jaettiin yhteistyötason- ja tuotekehitysprojektitason tekijöihin. Yksi työn keskeisistä tuloksista on se, että huolimatta tiedon jakamisen haasteista, monet niistä voidaan eliminoida tunnistamalla vallitsevat olosuhteet ja panostamalla tiedon jakamisen hallintakeinoihin. Työn manageriaalinen hyöty koskee erityisesti yrityksiä, jotka suunnittelevat ja tekevät tuotekehitysyhteistyötä yrityskumppaniensa kanssa. Työssä esitellään keinoja tämän haasteellisen tehtäväkentän hallintaan ja todetaan, että yritysten pitäisikin kiinnittää entistä enemmän huomiota tiedon jakamisen ja kommunikaation hallintaan jo tuotekehitysyhteistyötä suunniteltaessa.

Sliding Mode Control for Switched Mode Power Supplies

Control applications of switched mode power supplies have been widely investigated. The main objective ofresearch and development (R&D) in this field is always to find the most suitable control method to be implemented in various DC/DC converter topologies. Inother words, the goal is to select a control method capable of improving the efficiency of the converter, reducing the effect of disturbances (line and load variation), lessening the effect of EMI (electro magnetic interference), and beingless effected by component variation. The main objective of this research work is to study different control methods implemented in switched mode power supplies namely (PID control, hysteresis control, adaptive control, current programmed control, variable structure control (VSC), and sliding mode control (SMC). The advantages and drawbacks of each control method are given. Two control methods, the PID and the SMC are selected and their effects on DC/DC (Buck, Boost, and Buck-Boost) converters are examined. Matlab/SimulinkTM is used to implement PID control method in DC/DC Buck converter and SMC in DC/DC (Buck, and Buck Boost) converters. For the prototype, operational amplifiers (op-amps) are used to implement PID control in DC/DC Buck converter. For SMC op-amps are implemented in DC/DC Buck converter and dSPACETM is used to control the DC/DC Buck-Boost converter. The SMC can be applied to the DC/DC (Buck, Boost, and Buck-Boost) converters. A comparison of the effects of the PID control and the SMC on the DC/DC Buck converter response in steady state, under line variations, load variations, and different component variations is performed. Also the Conducted RF-Emissions between the PID and SMC DC/DC Buck Converter are compared. The thesis shows that, in comparison with the PID control, the SMC provides better steady-state response, better dynamic response, less EMI, inherent order reduction, robustness against system uncertainty disturbances, and an implicit stability proof. Giving a better steady-state and dynamic response, the SMC is implemented in a DC/DC resonant converter. The half-wave zero current switching (HWZCS) DC/DC Buck converter is selected as a converter topology. A general guideline to select the tank component values, needed for the designing of a HWZCS DC/DC Buck, is obtained. The implementation of the SMC to a HWZCS DC/DC Buck converter is analysed. The converter response is investigated in the steady-state region and in the dynamic region.

Value Processingin Organizations - Individual Perceptions in Three Case Companies

Values and value processes are said to be needed in every organization nowadays, as the world is changing and companies have to have something to "keep it together". Organizational values, which are approvedand used by the personnel, could be the key. Every organization has values. But what is the real value of values? The greatest and most crucial challenge is the feasibility of the value process. The main point in this thesis is tostudy how organizational members at different hierarchical levels perceive values and value processes in their organizations. This includes themes such as how values are disseminated, the targets of value processing, factors that affect the process, problems that occur during the value implementation and improvements that could be made when organizational values are implemented. These subjects are studied from the perspective of organizational members (both managers and employees); individuals in the organizations. The aim is to get the insider-perspective on value processing, from multiple hierarchical levels. In this research I study three different organizations (forest industry, bank and retail cooperative) and their value processes. The data is gathered from companies interviewing personnel in the head office and at the local level. The individuals areseen as members of organizations, and the cultural aspect is topical throughout the whole study. Values and cultures are seen as the 'actuality of reality' of organizations, interpreted by organizational members. The three case companies were chosen because they represented different lines of business and they all implemented value processing differently. Sincethe emphasis in this study is at the local level, the similar size of the local units was also an important factor. Values are in 'fashion' -but what does the fashion tell us about the real corporate practices? In annual reports companies emphasize the importance and power of official values. But what is the real 'point' of values? Values are publicly respected and advertised, but still it seems that the words do not meet the deeds. There is a clear conflict between theoretical, official and substantive organizational values: in the value processing from words to real action. This contradiction in value processing is studied through individual perceptions in this study. I study the kinds of perceptions organizationalmembers have when values are processed from the head office to the local level: the official value process is studied from the individual's perspective. Value management has been studied more during the 1990's. The emphasis has usually been on managers: how they consider the values in organizations and what effects it has on the management. Recent literature has emphasized values as tools for improving company performance. The value implementation as a process has been studied through 'good' and 'bad' examples, as if one successful value process could be copied to all organizations. Each company is different with different cultures and personnel, so no all-powerful way of processing values exists. In this study, the organizational members' perceptions at different hierarchical levels are emphasized. Still, managers are also interviewed; this is done since managerial roles in value dissemination are crucial. Organizational values cannot be well disseminated without management; this has been proved in several earlier studies (e.g. Kunda 1992, Martin 1992, Parker 2000). Recent literature has not sufficiently emphasized the individual's (organizational member's) role in value processing. Organizations consist of differentindividuals with personal values, at all hierarchical levels. The aim in this study is to let the individual take the floor. Very often the value process is described starting from the value definition and ending at dissemination, and the real results are left without attention. I wish to contribute to this area. Values are published officially in annual reports etc. as a 'goal' just like profits. Still, the results/implementationof value processing is rarely followed, at least in official reports. This is a very interesting point: why do companies espouse values, if there is no real control or feedback after the processing? In this study, the personnel in three different companies is asked to give an answer. In the empirical findings, there are several results which bring new aspects to the research area of organizational values. The targets of value processing, factors effecting value processing, the management's roles and the problems in value implementation are presented through the individual's perspective. The individual's perceptions in value processing are a recurring theme throughout the whole study. A comparison between the three companies with diverse value processes makes the research complete

Logging residues from regeneration fellings for biofuel production - a GIS-based availability and supply cost analysis

Finland has large forest fuel resources. However, the use of forest fuels for energy production has been low, except for small-scale use in heating. According to national action plans and programs related to wood energy promotion, the utilization of such resources will be multiplied over the next few years. The most significant part of this growth will be based on the utilization of forest fuels, produced from logging residues of regeneration fellings, in industrial and municipal power and heating plants. Availability of logging residues was analyzed by means of resource and demand approaches in order to identify the most suitable regions with focus on increasing the forest fuel usage. The analysis included availability and supply cost comparisons between power plant sites and resource allocation in a least cost manner, and between a predefined power plant structure under demand and supply constraints. Spatial analysis of worksite factors and regional geographies were carried out using the GIS-model environment via geoprocessing and cartographic modeling tools. According to the results of analyses, the cost competitiveness of forest fuel supply should be improved in order to achieve the designed objectives in the near future. Availability and supply costs of forest fuels varied spatially and were very sensitive to worksite factors and transport distances. According to the site-specific analysis the supply potential between differentlocations can be multifold. However, due to technical and economical reasons ofthe fuel supply and dense power plant infrastructure, the supply potential is limited at plant level. Therefore, the potential and supply cost calculations aredepending on site-specific matters, where regional characteristics of resourcesand infrastructure should be taken into consideration, for example by using a GIS-modeling approach constructed in this study.

Comprehensive Study of Crystal Growth from Solution

Crystal growth is an essential phase in crystallization kinetics. The rate of crystal growth provides significant information for the design and control of crystallization processes; nevertheless, obtaining accurate growth rate data is still challenging due to a number of factors that prevail in crystal growth. In industrial crystallization, crystals are generally grown from multi-componentand multi-particle solutions under complicated hydrodynamic conditions; thus, it is crucial to increase the general understanding of the growth kinetics in these systems. The aim of this work is to develop a model of the crystal growth rate from solution. An extensive literature review of crystal growth focuses on themodelling of growth kinetics and thermodynamics, and new measuring techniques that have been introduced in the field of crystallization. The growth of a singlecrystal is investigated in binary and ternary systems. The binary system consists of potassium dihydrogen phosphate (KDP, crystallizing solute) and water (solvent), and the ternary system includes KDP, water and an organic admixture. The studied admixtures, urea, ethanol and 1-propanol, are employed at relatively highconcentrations (of up to 5.0 molal). The influence of the admixtures on the solution thermodynamics is studied using the Pitzer activity coefficient model. Theprediction method of the ternary solubility in the studied systems is introduced and verified. The growth rate of the KDP (101) face in the studied systems aremeasured in the growth cell as a function of supersaturation, the admixture concentration, the solution velocity over a crystal and temperature. In addition, the surface morphology of the KDP (101) face is studied using ex situ atomic force microscopy (AFM). The crystal growth rate in the ternary systems is modelled on the basis of the two-step growth model that contains the Maxwell-Stefan (MS) equations and a surface-reaction model. This model is used together with measuredcrystal growth rate data to develop a new method for the evaluation of the model parameters. The validation of the model is justified with experiments. The crystal growth rate in an imperfectly mixed suspension crystallizer is investigatedusing computational fluid dynamics (CFD). A solid-liquid suspension flow that includes multi-sized particles is described by the multi-fluid model as well as by a standard k-epsilon turbulence model and an interface momentum transfer model. The local crystal growth rate is determined from calculated flow information in a diffusion-controlled crystal growth regime. The calculated results are evaluated experimentally.

Railcarrier in Intermodal Freight Transportation Network

The major objective of this thesis is to describe and analyse how a railcarrier is engaged in an intermodal freight transportation network through its role and position. Because of the fact that the role as a conceptualisation has a lot of parallels with the position, both these phenomena are evaluated theoretically and empirically. VR Cargo (a strategical business unitof the Finnish railway company VR Ltd.) was chosen to be the focal firm surrounded by the actors of the focal net. Because of the fact that networks are sets of relationships rather than sets of actors, it is essential to describe the dimensions of the relationships created through the time thus having a past, presentand future. The roles are created during long common history shared by the actors especially when IM networks are considered. The presence of roles is embeddedin the tasks, and the future is anchored to the expectations. Furthermore, in this study role refers to network dynamics, and to incremental and radical changes in the network, in a similar way as position refers to stability and to the influences of bonded structures. The main purpose of the first part of the study was to examine how the two distinctive views that have a dominant position in modern logistics ¿ the network view (particularly IMP-based network approach) and the managerial view (represented by Supply Chain Management) differ, especially when intermodalism is under consideration. In this study intermodalism was defined as a form of interorganisational behaviour characterized by the physical movement of unitized goods with Intermodal Transport Units, using more than one mode as performed by the net of operators. In this particular stage the study relies mainly on theoretical evaluation broadened by some discussions with the practitioners. This is essential, because the continuous dialogue between theory and practice is highly emphasized. Some managerial implications are discussed on the basis of the theoretical examination. A tentative model for empirical analysis in subsequent research is suggested. The empirical investigation, which relies on the interviews among the members in the focal net, shows that the major role of the focal company in the network is the common carrier. This role has some behavioural and functional characteristics, such as an executive's disclosure expressing strategic will attached with stable and predictable managerial and organisational behaviour. Most important is the notion that the focal company is neutral for all the other operators, and willing to enhance and strengthen the collaboration with all the members in the IM network. This also means that all the accounts are aimed at being equal in terms of customer satisfaction. Besides, the adjustments intensify the adopted role. However, the focal company is also obliged tosustain its role as it still has a government-erected right to maintain solely the railway operations on domestic tracks. In addition, the roles of a dominator, principal, partner, subcontractor, and integrator were present appearing either in a dyadic relationship or in net(work) context. In order to reveal differentroles, a dualistic interpretation of the concept of role/position was employed.

Metal surface and subsurface inspection using nondestructive optical methods

This thesis considers nondestructive optical methods for metal surface and subsurface inspection. The main purpose of this thesis was to study some optical methods in order to find out their applicability to industrial measurements. In laboratory testing the simplest light scattering approach, measurement of specular reflectance, was used for surface roughness evaluation. Surface roughness, curvature and finishing process of metal sheets were determined by specular reflectance measurements. Using a fixed angleof incidence, the specular reflectance method might be automated for industrialinspection. For defect detection holographic interferometry and thermography were compared. Using either holographic interferometry or thermography, relativelysmall-size defects in metal plates could be revealed. Holographic techniques have some limitations for industrial measurements. On the contrary, thermography has excellent prospects for on-line inspection, especially with scanning techniques.

Selective catalytic reduction of nitrogen oxides with ammonia in forced unsteady state reactors - Case based reasoning and mathematical model simulation reasoning

The application of forced unsteady-state reactors in case of selective catalytic reduction of nitrogen oxides (NOx) with ammonia (NH3) is sustained by the fact that favorable temperature and composition distributions which cannot be achieved in any steady-state regime can be obtained by means of unsteady-state operations. In a normal way of operation the low exothermicity of the selective catalytic reduction (SCR) reaction (usually carried out in the range of 280-350°C) is not enough to maintain by itself the chemical reaction. A normal mode of operation usually requires supply of supplementary heat increasing in this way the overall process operation cost. Through forced unsteady-state operation, the main advantage that can be obtained when exothermic reactions take place is the possibility of trapping, beside the ammonia, the moving heat wave inside the catalytic bed. The unsteady state-operation enables the exploitation of the thermal storage capacity of the catalyticbed. The catalytic bed acts as a regenerative heat exchanger allowing auto-thermal behaviour when the adiabatic temperature rise is low. Finding the optimum reactor configuration, employing the most suitable operation model and identifying the reactor behavior are highly important steps in order to configure a proper device for industrial applications. The Reverse Flow Reactor (RFR) - a forced unsteady state reactor - corresponds to the above mentioned characteristics and may be employed as an efficient device for the treatment of dilute pollutant mixtures. As a main disadvantage, beside its advantages, the RFR presents the 'wash out' phenomena. This phenomenon represents emissions of unconverted reactants at every switch of the flow direction. As a consequence our attention was focused on finding an alternative reactor configuration for RFR which is not affected by the incontrollable emissions of unconverted reactants. In this respect the Reactor Network (RN) was investigated. Its configuration consists of several reactors connected in a closed sequence, simulating a moving bed by changing the reactants feeding position. In the RN the flow direction is maintained in the same way ensuring uniformcatalyst exploitation and in the same time the 'wash out' phenomena is annulated. The simulated moving bed (SMB) can operate in transient mode giving practically constant exit concentration and high conversion levels. The main advantage of the reactor network operation is emphasizedby the possibility to obtain auto-thermal behavior with nearly uniformcatalyst utilization. However, the reactor network presents only a small range of switching times which allow to reach and to maintain an ignited state. Even so a proper study of the complex behavior of the RN may give the necessary information to overcome all the difficulties that can appear in the RN operation. The unsteady-state reactors complexity arises from the fact that these reactor types are characterized by short contact times and complex interaction between heat and mass transportphenomena. Such complex interactions can give rise to a remarkable complex dynamic behavior characterized by a set of spatial-temporal patterns, chaotic changes in concentration and traveling waves of heat or chemical reactivity. The main efforts of the current research studies concern the improvement of contact modalities between reactants, the possibility of thermal wave storage inside the reactor and the improvement of the kinetic activity of the catalyst used. Paying attention to the above mentioned aspects is important when higher activity even at low feeding temperatures and low emissions of unconverted reactants are the main operation concerns. Also, the prediction of the reactor pseudo or steady-state performance (regarding the conversion, selectivity and thermal behavior) and the dynamicreactor response during exploitation are important aspects in finding the optimal control strategy for the forced unsteady state catalytic tubular reactors. The design of an adapted reactor requires knowledge about the influence of its operating conditions on the overall process performance and a precise evaluation of the operating parameters rage for which a sustained dynamic behavior is obtained. An apriori estimation of the system parameters result in diminution of the computational efforts. Usually the convergence of unsteady state reactor systems requires integration over hundreds of cycles depending on the initial guess of the parameter values. The investigation of various operation models and thermal transfer strategies give reliable means to obtain recuperative and regenerative devices which are capable to maintain an auto-thermal behavior in case of low exothermic reactions. In the present research work a gradual analysis of the SCR of NOx with ammonia process in forced unsteady-state reactors was realized. The investigation covers the presentationof the general problematic related to the effect of noxious emissions in the environment, the analysis of the suitable catalysts types for the process, the mathematical analysis approach for modeling and finding the system solutions and the experimental investigation of the device found to be more suitable for the present process. In order to gain information about the forced unsteady state reactor design, operation, important system parameters and their values, mathematical description, mathematicalmethod for solving systems of partial differential equations and other specific aspects, in a fast and easy way, and a case based reasoning (CBR) approach has been used. This approach, using the experience of past similarproblems and their adapted solutions, may provide a method for gaining informations and solutions for new problems related to the forced unsteady state reactors technology. As a consequence a CBR system was implemented and a corresponding tool was developed. Further on, grooving up the hypothesis of isothermal operation, the investigation by means of numerical simulation of the feasibility of the SCR of NOx with ammonia in the RFRand in the RN with variable feeding position was realized. The hypothesis of non-isothermal operation was taken into account because in our opinion ifa commercial catalyst is considered, is not possible to modify the chemical activity and its adsorptive capacity to improve the operation butis possible to change the operation regime. In order to identify the most suitable device for the unsteady state reduction of NOx with ammonia, considering the perspective of recuperative and regenerative devices, a comparative analysis of the above mentioned two devices performance was realized. The assumption of isothermal conditions in the beginningof the forced unsteadystate investigation allowed the simplification of the analysis enabling to focus on the impact of the conditions and mode of operation on the dynamic features caused by the trapping of one reactant in the reactor, without considering the impact of thermal effect on overall reactor performance. The non-isothermal system approach has been investigated in order to point out the important influence of the thermal effect on overall reactor performance, studying the possibility of RFR and RN utilization as recuperative and regenerative devices and the possibility of achieving a sustained auto-thermal behavior in case of lowexothermic reaction of SCR of NOx with ammonia and low temperature gasfeeding. Beside the influence of the thermal effect, the influence of the principal operating parameters, as switching time, inlet flow rate and initial catalyst temperature have been stressed. This analysis is important not only because it allows a comparison between the two devices and optimisation of the operation, but also the switching time is the main operating parameter. An appropriate choice of this parameter enables the fulfilment of the process constraints. The level of the conversions achieved, the more uniform temperature profiles, the uniformity ofcatalyst exploitation and the much simpler mode of operation imposed the RN as a much more suitable device for SCR of NOx with ammonia, in usual operation and also in the perspective of control strategy implementation. Theoretical simplified models have also been proposed in order to describe the forced unsteady state reactors performance and to estimate their internal temperature and concentration profiles. The general idea was to extend the study of catalytic reactor dynamics taking into account the perspectives that haven't been analyzed yet. The experimental investigation ofRN revealed a good agreement between the data obtained by model simulation and the ones obtained experimentally.

Dynamic analysis of belt-drives using the absolute nodal coordinate formulation

Belt-drive systems have been and still are the most commonly used power transmission form in various applications of different scale and use. The peculiar features of the dynamics of the belt-drives include highly nonlinear deformation,large rigid body motion, a dynamical contact through a dry friction interface between the belt and pulleys with sticking and slipping zones, cyclic tension of the belt during the operation and creeping of the belt against the pulleys. The life of the belt-drive is critically related on these features, and therefore, amodel which can be used to study the correlations between the initial values and the responses of the belt-drives is a valuable source of information for the development process of the belt-drives. Traditionally, the finite element models of the belt-drives consist of a large number of elements thatmay lead to computational inefficiency. In this research, the beneficial features of the absolute nodal coordinate formulation are utilized in the modeling of the belt-drives in order to fulfill the following requirements for the successful and efficient analysis of the belt-drive systems: the exact modeling of the rigid body inertia during an arbitrary rigid body motion, the consideration of theeffect of the shear deformation, the exact description of the highly nonlinear deformations and a simple and realistic description of the contact. The use of distributed contact forces and high order beam and plate elements based on the absolute nodal coordinate formulation are applied to the modeling of the belt-drives in two- and three-dimensional cases. According to the numerical results, a realistic behavior of the belt-drives can be obtained with a significantly smaller number of elements and degrees of freedom in comparison to the previously published finite element models of belt-drives. The results of theexamples demonstrate the functionality and suitability of the absolute nodal coordinate formulation for the computationally efficient and realistic modeling ofbelt-drives. This study also introduces an approach to avoid the problems related to the use of the continuum mechanics approach in the definition of elastic forces on the absolute nodal coordinate formulation. This approach is applied to a new computationally efficient two-dimensional shear deformable beam element based on the absolute nodal coordinate formulation. The proposed beam element uses a linear displacement field neglecting higher-order terms and a reduced number of nodal coordinates, which leads to fewer degrees of freedom in a finite element.

Maximizing Benefits in Information Technology Outsourcing

Information Technology (IT) outsourcing has traditionally been seen as a means to acquire newresources and competencies to perform standard tasks at lowered cost. This dissertationchallenges the thought that outsourcing should be limited to non-strategic systems andcomponents, and presents ways to maximize outsourcing enabled benefits while minimizingassociated risks. In this dissertation IT outsourcing is approached as an efficiency improvement and valuecreationprocess rather than a sourcing decision. The study focuses on when and how tooutsource information technology, and presents a new set of critical success factors foroutsourcing project management. In a case study it re-validates the theory-based propositionthat in certain cases and situations it is beneficial to partly outsource also strategic IT systems. The main contribution of this dissertation is the validation of proposal that in companies wherethe level of IT competency is high, managerial support established and planning processes welldefined,it is possible to safely outsource also business critical IT systems. A model describing the critical success factors in such cases is presented based on existing knowledge on the fieldand the results of empirical study. This model further highlights the essence of aligning IT andbusiness strategies, assuming long-term focus on partnering, and the overall target ofoutsourcing to add to the strengths of the company rather than eliminating weaknesses.

Development of a Ceramic Membrane Filtration Equipment and Its Applicability for Different Wastewaters

In this thesis the membrane filtration equipment for plate type ceramic membranes was developed based on filtration results achieved with different kinds of wastewaters. The experiments were mainly made with pulp and board mill wastewaters, but some experiments were also made with a bore well water and a stone cutting mine wastewater. The ceramicmembranes used were alpha-alumina membranes with a pore size of 100 nm. Some ofthe membranes were coated with a gamma-alumina layer to reduce the membrane pore size to 10 nm, and some of them were modified with different metal oxides in order to change the surface properties of the membranes. The effects of operationparameters, such as cross-flow velocity, filtration pressure and backflushing on filtration performance were studied. The measured parameters were the permeateflux, the quality of the permeate, as well as the fouling tendency of the membrane. A dynamic membrane or a cake layer forming on top of the membrane was observed to decrease the flux and increase separa-tion of certain substances, especially at low cross-flow velocities. When the cross-flow velocities were increased the membrane properties became more important. Backflushing could also be used to decrease the thickness of the cake layer and thus it improved the permeate flux. However, backflushing can lead to a reduction of retentions in cases where the cake layer is improving them. The wastewater quality was important for the thickness of the dynamic membrane and the membrane pore size influenced the permeate flux. In general, the optimization of operation conditions is very important for the successful operation of a membrane filtration system. The filtration equipment with a reasonable range of operational conditions is necessary, especiallywhen different kinds of wastewaters are treated. This should be taken into account already in the development stage of a filtration equipment.