Highly radiation sensitive type IA FBGs for future dosimetry applications

We have studied Co60 gamma-irradiation effect on the characteristics of Type IA fiber Bragg gratings. A record Bragg peak shift of 190 pm was observed for a grating written in Fibercore PS-1250/1500 photosensitive fiber at a radiation dose of 116 kGy. Type IA and Type I gratings show different kinetics under radiation and during post-radiation annealing, which can be used for the design of a grating based dosimetry system.

Tunnel monitoring using multicore displacement sensor

In this paper, we report the first demonstration of multiplexed fibre Bragg grating strain sensors in a multicore fibre for shape measurement and their application to structural monitoring. Sets of gratings, acting as strain gauges, are co-located in the multicore fibre such that they enable the curvature to be determined via differential strain measurement. Multiple sets of these gratings allow the curvature to be measured at several points along the fibre. In this paper, the multicore fibre is configured to measure the deflection of a simple mechanical beam arising from the displacement of concrete tunnel sections. Laboratory tests are presented in which the system was demonstrated capable of displacement measurement with a resolution of ±0.1 mm over a range of several millimetres. © 2006 IOP Publishing Ltd.

On-off and multistate intermittencies in cascaded random distributed feedback fibre laser

A range of physical and engineering systems exhibit an irregular complex dynamics featuring alternation of quiet and burst time intervals called the intermittency. The intermittent dynamics most popular in laser science is the on-off intermittency [1]. The on-off intermittency can be understood as a conversion of the noise in a system close to an instability threshold into effective time-dependent fluctuations which result in the alternation of stable and unstable periods. The on-off intermittency has been recently demonstrated in semiconductor, Erbium doped and Raman lasers [2-5]. Recently demonstrated random distributed feedback (random DFB) fiber laser has an irregular dynamics near the generation threshold [6,7]. Here we show the intermittency in the cascaded random DFB fiber laser. We study intensity fluctuations in a random DFB fiber laser based on nitrogen doped fiber. The laser generates first and second Stokes components 1120 nm and 1180 nm respectively under an appropriate pumping. We study the intermittency in the radiation of the second Stokes wave. The typical time trace near the generation threshold of the second Stokes wave (Pth) is shown at Fig. 1a. From the number of long enough time-traces we calculate statistical distribution between major spikes in time dynamics, Fig. 1b. To eliminate contribution of high frequency components of spikes we use a low pass filter along with the reference value of the output power. Experimental data is fitted by power law, ~(P-Pth)y, where is a mean time between pikes. There are two different intermittency regimes. Just above Pth, the mean time is approximated by the -3/2 power law. The -3/2 power law is typical to the on-off intermittency with hopping between two states (first and second Stokes waves in our case) [7]. At higher power, the mean time is approximated by -4 power law, that indicates a change in intermittency type to multistate. Multistable dynamics is observed in erbium-doped fiber lasers [8]. The origin of multiples states in our system could be probably connected with polarization hopping or other reasons and should be further investigated. We have presented a first experimental statistical characterisation of the on-off and multistate intermittencies that occur in the generation of the second Stokes wave in nitrogen doped random DFB fiber laser. References [1] H. Fujisaka and T. Yamada, “A New Intermittency in Coupled Dynamical Systems,” Prog. Theor. Phys. 74, 918 (1985). [2] S. Osborne, A. Amann, D. Bitauld, and S. O’Brien, “On-off intermittency in an optically injected semiconductor laser,” Phys. Rev. E 85, 056204 (2012). [3] S. Sergeyev, K. O'Mahoney, S. Popov, and A. T. Friberg, “Coherence and anticoherence resonance in high-concentration erbium-doped fiber laser,” Opt. Lett. 35, 3736 (2010). [4] A.E. El-Taher, S.V. Sergeyev, E.G. Turitsyna, P. Harper, and S. K. Turitsyn, “Intermittent Self-Pulsing in a Fiber Raman Laser”, In proc. Conf. Nonlin. Photon., paper ID 1367139, Colorado Springs, USA, 2012 [5] S.K. Turitsyn, S.A. Babin, A.E. El-Taher, P. Harper, D.V. Churkin, S.I. Kablukov, J.D. Ania-Castañón, V. Karalekas, and E.V. Podivilov, “Random distributed feedback fibre laser”, Nat. Photon..4, 231 (2010). [6] I. D. Vatnik, D. V. Churkin, S. A. Babin, and S. K. Turitsyn, "Cascaded random distributed feedback Raman fiber laser operating at 1.2 μm," Opt. Express 19, 18486 (2011). [7] W. Feller, An introduction to probability theory and its applications, Vol. 1, 3rd ed. (Wiley, New-York, 1968). [8] G. Huerta-Cuellar, A.N. Pisarchik, and Y.O. Barmenkov, “Experimental characterization of hopping dynamics in a multistable fiber laser,” Phys. Rev. E 78, 035202(R) (2008).

Гиперслучайные Марковские Модели

Для описания физических процессов в непредсказуемо меняющихся статистических условиях предложены гиперслучайные марковские модели. Введены новые определения понятий сходимости в среднеквадратическом последовательности гиперслучайных величин и последовательности гиперслучайных функций, позволившие ввести понятия непрерывности, дифференцируемости и интегрируемости гиперслучайных функций. Обобщено понятие марковского процесса на случай гиперслучайных процессов. Получены прямое и обратное уравнения Колмогорова, описывающие диффузионные гиперслучайные процессы. Исследованы винеровский и гауссовский марковский гиперслучайные процессы.

Numerical and experimental analysis of sensitivity-enhanced RI sensor based on Ex-TFG in thin cladding fiber

We report a highly sensitive refractive index (RI) sensor in the aqueous solution, which is based on an 81°-tilted fiber grating structure inscribed into a thin cladding fiber with 40 μm cladding radius. The numerical analysis has indicated that the RI sensitivity of cladding resonance mode of the grating can be significantly enhanced with reducing cladding size. This has been proved by the experimental results as the RI sensitivities of TM and TE resonance peaks in the index region of 1.345 have been increased to 1180 nm/RIU and 1150 nm/RIU, respectively, from only 200 and 170 nm/RIU for the same grating structure inscribed in standard telecom fiber with 62.5-μm cladding radius. Although the temperature sensitivity has also increased, the change in temperature sensitivity is still insignificant in comparison with RI sensitivity enhancement.

A neoliberális "kapitalizmus" fogalom megszűnése (The disappearance of the term “neoliberal capitalism”)

A kommunizmusnak – vagy amit a XX. században annak neveztek – a fasizmus nem elfogadható alternatívája. Az elmúlt húsz év meghatározó ideológiai áramlata, a neoliberalizmus ezt nem értette meg. A baloldallal szemben túlzott mértékben lépett fel, míg ezzel szemben a jobboldali szélsőségnek jelentős teret engedett. A szélsőjobboldali szemlélet, az anakronisztikus, barbár provincializmus felszámolásához szükség van a nyugati típusú konzervativizmus és a szociáldemokrácia együttműködésére, a két elméleti irányzat partneri viszonyára. Ehhez mindenekelőtt a neoliberalizmus elméleti meghaladására van szükség. A tanulmányban ezért a neoliberalizmus meghatározó tételeinek kritikáját végezzük el annak érdekében, hogy az új világrendhez igazodó elméleti keret kialakulásához hozzájáruljunk. _____ The acceptable alternative of communism, or what it had been called in the 20th century, is not fascism. The mainstream in the ideology of the last couple of decades, neo-liberalism, has not understood this statement. It allows too wide range for the extremists in the far right; however, in the other side it was too rigid with the left. To terminate the barbarian, anachronistic provincialism in the far right, cooperation between the neo-conservativism prevailing in the West and the social democrat movement is needed. The partnership between the two streams is inevitable. In order to achieve this goal the first step is the debate with the theoretical background of the neo-liberal way of thinking. The main purpose of this paper is to start this discussion hoping that we can contribute to the new theoretical framework in the social sciences.

View of the TS/Ph-2 autosampler site from road, Taylor Slough

This material is based upon work supported by the National Science Foundation through the Florida Coastal Everglades Long-Term Ecological Research program under Cooperative Agreements #DBI-0620409 and #DEB-9910514. This image is made available for non-commercial or educational use only.

Bondage and Discipline, Dominance and Submission, and Sadism and Masochism (BDSM) Identity Development

Identity shapes how people make sense of the world. Sexual minorities’ sexual orientations and gender identities fall outside of heteronormative categorizations. Adults engage in diverse relationships: many of them fall outside of heteronormative boundaries. As an instrument of social justice, Adult Education can be a site for BDSM identity development.

Correlates of Non-Institutional Food Service Turnover

The high rate of restaurant employee turnover, particularly of the non-supervisory employee, is a continuing problem. The authors assess the possible correlates of this turnover and their relative strengths, ranking and comparing working hours, quality of supervision, chance for promotion, on-the-job training, pay, work of others, employees' attitudes, and management's interest in employees to present possible solutions for the high rate of turnover.

The Beacon, November 1, 2007

Vol. 20, Issue 26, 12 pages

Oppressive Eating Habits

Dr. Miguel A. De La Torre is a Professor of Social Ethics at Illif School of Theology. His lecture is on the interplay between American eating habits and its contribution to oppressive structures throughout Latin America.

International tourism : can it contribute to Nigeria's economic growth as other industrial sectors?

The growth of international tourism and the attendant economic benefits to the world nations, has been phenominal since the end of the second world war. It is considered that the industry's upsurge will continue even in the phase of various constraints exemplified in high fuel cost, constant increase in fares and the threatening world-wide recessions. Developed as well as developing countries have gained substantially from the industry. A recent development shows increasing tourist traffic towards developing countries, while developed countries still hold their fort in stable growth of tourist receipts. The strategic beneficial effects of international tourist industry are often quantified in terms of foreign exchange earnings, employments offered, and the Real Estate super-structures; but in general,the industry has innumerable direct and indirect benefits to any nation engaging in the trade. The objective of this thesis is to demonstrate by comparative analysis and proven parameters that the international tourist industry which is given low priority in development in Nigeria, can equally contribute to the nation's economic growth as other industrial sectors which receive high priority and patronage in development. The data for this paper are gathered from primary sources which are i) responses by the Federal and State Governments' tourism-related offices; ii) government publications e.a. the Third National Development Plan of Federal Republic of Nigeria; and iii) Books and collections. The secondary sources include reports,periodicals and hospitality industry publications. To formally establish the international tourist industry in Nigeria, all the governments (Federal, State and Local) and the private sector in the country, should commence the development of the industry with research and feasibility studies, to be followed by proper planning at all levels and based on the result of the research and feasibility studies.

A Thermally Wavelength-tunable Photonic Switch Based on Silicon Microring Resonator

Silicon photonics is a very promising technology for future low-cost high-bandwidth optical telecommunication applications down to the chip level. This is due to the high degree of integration, high optical bandwidth and large speed coupled with the development of a wide range of integrated optical functions. Silicon-based microring resonators are a key building block that can be used to realize many optical functions such as switching, multiplexing, demultiplaxing and detection of optical wave. The ability to tune the resonances of the microring resonators is highly desirable in many of their applications. In this work, the study and application of a thermally wavelength-tunable photonic switch based on silicon microring resonator is presented. Devices with 10µm diameter were systematically studied and used in the design. Its resonance wavelength was tuned by thermally induced refractive index change using a designed local micro-heater. While thermo-optic tuning has moderate speed compared with electro-optic and all-optic tuning, with silicon’s high thermo-optic coefficient, a much wider wavelength tunable range can be realized. The device design was verified and optimized by optical and thermal simulations. The fabrication and characterization of the device was also implemented. The microring resonator has a measured FSR of ~18 nm, FWHM in the range 0.1-0.2 nm and Q around 10,000. A wide tunable range (>6.4 nm) was achieved with the switch, which enables dense wavelength division multiplexing (DWDM) with a channel space of 0.2nm. The time response of the switch was tested on the order of 10 us with a low power consumption of ~11.9mW/nm. The measured results are in agreement with the simulations. Important applications using the tunable photonic switch were demonstrated in this work. 1×4 and 4×4 reconfigurable photonic switch were implemented by using multiple switches with a common bus waveguide. The results suggest the feasibility of on-chip DWDM for the development of large-scale integrated photonics. Using the tunable switch for output wavelength control, a fiber laser was demonstrated with Erbium-doped fiber amplifier as the gain media. For the first time, this approach integrated on-chip silicon photonic wavelength control.