MISTURAS DE HERBICIDAS: EFEITOS DE ADJUVANTES NO CONTROLE DE PLANTAS INFESTANTES NA CULTURA da SOJA

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Comparação de três métodos de estimativa da evapotranspiração de referência para a região de Araraquara - SP

Uma forma de verificar a eficiência de métodos de estimativa da evapotranspiração de referência (ETo) é a comparação com o método-padrão. Este trabalho tem por finalidade comparar três métodos de estimativa da ETo: Radiação Solar (RS), Makkink (MAK) e Tanque Classe A (TCA) em relação ao método de Penman-Monteith (PM), em dois períodos distintos das fases de desenvolvimento da cultura de citros, com dados médios quinzenais para os períodos inverno-primavera e verão-outono. A pesquisa foi desenvolvida em uma fazenda de citros, em Araraquara - SP, onde foi instalada uma estação meteorológica automatizada e um tanque Classe A. Por intermédio da estação meteorológica automatizada, foram obtidas medidas da radiação solar global, saldo de radiação, temperatura do ar, umidade relativa do ar e velocidade do vento. A análise de regressão indica que, para o método TCA, pode ser utilizado o modelo de regressão y = bx, em que, y representa a EToPM e x a EToTCA. Para os demais métodos analisados, o modelo mais adequado foi y = bx + a. Os resultados obtidos neste estudo evidenciam que o método do TCA superestimou a ETo em 26% no período verão-outono e em 24% no período inverno-primavera. O método de MAK subestimou a ETo nos dois períodos analisados, enquanto o método da RS superestimou a ETo.

Efeito da pressurização com CO2 sobre o pH da água

Durante a fase de desenvolvimento de novos produtos fitossanitários é comumente utilizado o pulverizador a pressão constante, pressurizado com CO2. O gás carbônico pode provocar a acidificação da água e afetar o comportamento do composto que está sendo avaliado. No presente trabalho, amostras de água de 30 diferentes fontes foram pressurizadas com CO2 durante cinco minutos, até 275 kPa (40 lbf/pol.2), e o pH foi medido na água que saiu do bico e na água no inteior do tanque do pulverizador. Os resultados mostraram redução nos valores do pH em toda as amostras . Os valores do pH elevaram-se ligeiramente após a saída da água pelo bico do pulverizador. A redução, em alguns casos, foi marcante, atingindo 4,91 unidades de pH no caso mais drástico. Esses dados levam a recomendar cautela na interpretação dos resultados obtidos com o uso dos pulverizadores pressurizados com o gás carbônico.

Redução da interferência de Brachiaria plantaginea (link) hitch. em milho através de capinas e aplicação de herbicidas em diferentes épocas

O rendimento de grãos de milho é afetado pela interferência com as plantas daninhas, que pode variar em função da eficiência e da época de realização do método de controle utilizado no manejo da cultura. O objetivo deste trabalho foi determinar os efeitos da aplicação de herbicidas e de capinas em diferentes épocas sobre o controle de plantas daninhas e o rendimento de grãos na cultura do milho. O experimento foi instalado no sistema convencional de preparo do solo em Eldorado do Sul (RS), no ano agrícola 1997/98. A espécie de planta daninha predominante na área experimental foi Brachiaria plantaginea (BRAPL), em infestação média de 285 plantas por m². Os tratamentos foram constituídos pela aplicação isolada, seqüencial ou em mistura em tanque, em diferentes doses e épocas, dos herbicidas atrazine, atrazine + óleo vegetal, metolachlor e nicosulfuron. Todos os tratamentos com herbicidas foram correspondidos por tratamentos em que se utilizou capina manual com início na mesma época de aplicação dos herbicidas. O controle realizado em pré-emergência ou no início do desenvolvimento da cultura proporcionou maior rendimento de grãos, mesmo com a diminuição do controle de BRAPL no final do ciclo. As aplicações seqüenciais de herbicidas proporcionaram maior rendimento de grãos do que as misturas em tanque. Os rendimentos de grãos obtidos com a aplicação de herbicidas nas diversas épocas não foram diferentes em relação às suas respectivas capinas.

Espectro de gotas de pontas de pulverização com adjuvantes de uso agrícola

O sucesso de uma boa aplicação de produtos fitossanitários depende da sinergia entre fatores como tamanho de gota, tipo de ponta, pressão, volume e composição da calda e características do alvo. Assim, o objetivo deste trabalho foi avaliar o espectro de gotas produzidas por pontas de jato plano defletor (TT 11002) e jato plano defletor com indução de ar (TTI 11002), com diferentes adjuvantes adicionados à calda de pulverização, pela técnica de difração de raio laser. O experimento foi conduzido em delineamento inteiramente casualizado, com quatro repetições, em esquema fatorial 2 x 5, ou seja, duas pontas de aplicação (jato plano defletor e jato plano defletor com indução de ar) e cinco composições de calda (água e água mais quatro adjuvantes: fosfatidilcoline+ácido propiônico, éter poliglicólico de monilfenol, ésteres de ácidos graxos e nonil-fenol etoxilado+óxido de etileno). em ambiente controlado, avaliou-se o espectro de gotas, por meio de um analisador a laser de gotas em tempo real, na pressão de 276 kPa. O efeito dos adjuvantes no espectro de gotas mostrou-se dependente da ponta de pulverização empregada. A adição dos adjuvantes à calda não alterou o risco potencial de deriva, expresso pela porcentagem do volume em gotas com diâmetro inferior a 100 µm, porém o adjuvante fosfatidilcoline+ácido propiônico reduziu o diâmetro da mediana volumétrica das gotas produzidas pela ponta de jato plano defletor com indução de ar, em relação à avaliação feita somente com água.

Metodologia de infecção experimental e grau de susceptibilidade do híbrido tambacu e Leporinus macrocephalus Garavello & Britski (Osteichthyes, Anostomidae) a quatro inóculos de trofozoítos de Icthyophthirius multifiliis Fouquet (Protozoa, Ciliophora)

Tropical fishes like Leporinus macrocephalus Garavello & Britski, 1988 (piauçu) and the hybrid tambacu (Piaractus mesopotamicus Holmberg, 1887 pacu male x Colossoma macropomum Cuvier, 1818 tambaqui female) were experimentally infected with four inocula of trophonts of Ichthyophthirius multifiliis Fouquet, 1876 (Protozoa, Ciliophora) and the infection level was evaluated. Each one of twelve experimental units consisted of a tank with 200 liters of water and two specimens of each kind of fish. The following treatments were designed to each tank, in triplicate: 8, 16,32 and 64 trophonts. After 8 days of exposure the fishes were killed and the number of trophonts was counted at a stereoscopic microscope. This assay showed to be feasible at tropical conditions and was able to show that tambacu was more susceptiblc than piauçu.

Bactérias do gênero Aeromonas em abatedouro de frangos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Características microbiológicas de amostras de leite de tanque comunitário

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Non-linear growth models for bullfrog tadpoles

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Modelling and optimization of the cephalosporin C production bioprocess in a fed-batch bioreactor with invert sugar as substrate

Cephalosporin C production process optimization was studied based on four experiments carried out in an agitated and aerated tank fermenter operated as a fed-batch reactor. The microorganism Cephalosporium acremonium ATCC 48272 (C-10) was cultivated in a synthetic medium containing glucose as major carbon and energy source. The additional medium contained a hydrolyzed sucrose solution as the main carbon and energy source and it was added after the glucose depletion. By manipulating the supplementary feed rate, it was possible to increase antibiotic production. A mathematical model to represent the fed-batch production process was developed. It was observed that the model was applicable under different operation conditions, showing that optimization studies can be made based on this model. (C) 1999 Elsevier B.V. Ltd. All rights reserved.

Modeling and simulation of cephalosporin C production in a fed-batch tower-type bioreactor

Immobilized cell utilization in tower-type bioreactor is one of the main alternatives being studied to improve the industrial bioprocess. Other alternatives for the production of beta -lactam antibiotics, such as a cephalosporin C fed-batch p recess in an aerated stirred-tank bioreactor with free cells of Cepha-losporium acremonium or a tower-type bioreactor with immobilized cells of this fungus, have proven to be more efficient than the batch profess. In the fed-batch process, it is possible to minimize the catabolite repression exerted by the rapidly utilization of carbon sources (such as glucose) in the synthesis of antibiotics by utilizing a suitable flow rate of supplementary medium. In this study, several runs for cephalosporin C production, each lasting 200 h, were conducted in a fed-batch tower-type bioreactor using different hydrolyzed sucrose concentrations, For this study's model, modifications were introduced to take into account the influence of supplementary medium flow rate. The balance equations considered the effect of oxygen limitation inside the bioparticles. In the Monod-type rate equations, eel concentrations, substrate concentrations, and dissolved oxygen were included as reactants affecting the bioreaction rate. The set of differential equations was solved by the numerical method, and the values of the parameters were estimated by the classic nonlinear regression method following Marquardt's procedure with a 95% confidence interval. The simulation results showed that the proposed model fit well with the experimental data,and based on the experimental data and the mathematical model an optimal mass flow rate to maximize the bioprocess productivity could be proposed.

Evaluation of the influences of solution path length and additives concentrations on the solar photo-Fenton degradation of 4-chlorophenol using multivariate analysis

This study reports the photodegradation of 4-chlorophenol (4-CP) in aqueous solution by the photo-Fenton process using solar irradiation. The influence of solution path length, and Fe(NO3)(3) and H2O2 concentrations on the degradation of 4-CP is evaluated by response surface methodology. The degradation process was monitored by the removal of total organic carbon (TOC) and the release of chloride ion. The results showed a very important role of iron concentration either for TOC removal or dechlorination. on the other hand, a negative effect of increasing solution path length on mineralization was observed, which can be compensated by increasing the iron concentration. This permits an adjustment of the iron concentration according to the irradiation exposure area and path length (depth of a tank reactor). Under optimum conditions of 1.5 mM Fe(NO3)(3), 20.0 mM H2O2 and 4.5 cm solution path length, 17 min irradiation under solar light were sufficient to reduce a 72 mg C L-1 solution of 4-CP by 91 (c) 2006 Elsevier B.V. All rights reserved.

Cephalosporin C production by immobilized Cephalosporium acremonium cells in a repeated batch tower bioreactor

The industrial production of antibiotics with filamentous fungi is usually carried out in conventional aerated and agitated tank fermentors. Highly viscous non-Newtonian broths are produced and a compromise must be found between convenient shear stress and adequate oxygen transfer. In this work, cephalosporin C production by bioparticles of immobilized cells of Cephalosporium acremonium ATCC 48272 was studied in a repeated batch tower bioreactor as an alternative to the conventional process. Also, gas-liquid oxygen transfer volumetric coefficients, k(L)a, were determined at various air flow-rates and alumina contents in the bioparticle. The bioparticles were composed of calcium alginate (2.0% w/w), alumina (<44 micra), cells, and water. A model describing the cell growth, cephalosporin C production, oxygen, glucose, and sucrose consumption was proposed. To describe the radial variation of oxygen concentration within the pellet, the reaction-diffusion model forecasting a dead core bioparticle was adopted. The k(L)a measurements with gel beads prepared with 0.0, 1.0, 1.5, and 2.0% alumina showed that a higher k(L)a value is attained with 1.5 and 2.0%. An expression relating this coefficient to particle density, liquid density, and air velocity was obtained and further utilized in the simulation of the proposed model. Batch, followed by repeated batch experiments, were accomplished by draining the spent medium, washing with saline solution, and pouring fresh medium into the bioreactor. Results showed that glucose is consumed very quickly, within 24 h, followed by sucrose consumption and cephalosporin C production. Higher productivities were attained during the second batch, as cell concentration was already high, resulting in rapid glucose consumption and an early derepression of cephalosporin C synthesizing enzymes. The model incorporated this improvement predicting higher cephalosporin C productivity. (C) 2004 Wiley Periodicals, Inc.

Feeding habit of the Amazon river prawn Macrobrachium amazonicum larvae

To investigate the feeding habit of Macrobrachium amazonicum, three experiments were carried out assessing the stage at which larvae start exogenous feeding, the acceptance of inert food by different larval stages and the ratio between live and inert diet ingested by larvae at each larval stage. In the first experiment, newly hatched larvae were kept in 500-mL beakers and fed from stages I, II or III onward. Larval survival was not affected by the larval stage at which exogenous feeding started, but mean weight gain was lower when food was offered from stage III onward. In the second experiment, 60 larvae from each stage (I to IX) were fasted for 2 h and then fed on inert diet in excess. Only larvae from stage IV onward accepted this inert diet. In the last experiment, newly hatched larvae were stocked in a larviculture tank and fed daily on both Artemia nauplii and inert diet. After 15 min, food content in the digestive tract of individual larvae was analyzed under stereomicroscopy. Larvae in stage I did not feed, while live food was accepted from stage II onward and inert food from stage III onward. Larvae in stages IV, V and VI accepted both foods with no preference, while inert food was predominant in stages VII to IX In conclusion, to feed M amazonicum larvae on Artemia before stage II or on inert diet before stage IV is unnecessary. It increases production costs and may impair water quality. From stages IV to VI, feeding on Artemia and inert diet is probably necessary, while inert diet should be the main food item from stage VII onward. This schedule may optimize feeding management and production costs. (c) 2007 Elsevier B.V. All lights reserved.

Use of ideal protein concept for precision formulation of amino acid levels in fish-meal-free diets for juvenile Nile tilapia (Oreochromis niloticus L.)

This study was undertaken in a closed system with Nile tilapia (Oreochromis niloticus) to examine the effects of total replacement of fish meal (FM) by soybean meal. Nile tilapia fingerlings with an average weight of 5.34+/-0.08 g were hand-fed one of the five isoenergetic (approximate to13.5 MJ digestible energy kg(-1)) and isoproteic (approximate to31% of digestible protein) experimental diets to satiation, six times a day during 85 days in eight replicate fibreglass tanks (six fish per tank). The control diet containing FM was substituted by soybean meal, with and without essential amino acids (lysine, methionine and threonine) or dicalcium phosphate supplementation. The supplemental amino acids were added at levels to simulate the reference amino acid profile of Nile tilapia carcass protein, based on the ideal protein concept. The results showed that soybean meal diet supplemented only with dicalcium phosphate was inferior to the control diet with FM and soybean meal diets supplemented with dicalcium phosphate and essential amino acids. Multiple essential amino acids and dicalcium phosphate incorporation in soybean meal diets was associated with performance, whole-body composition and carcass yield equal to that of the fish fed with the control diet containing FM. These data suggest that a diet with all plant protein source, supplemented with essential amino acids, based on tissue amino acid profile, can totally replace FM in a diet for Nile tilapia, without adverse effects on the growth performance, carcass yield and composition.