917 resultados para silent agreements
Resumo:
The early detection of hearing deficits is important to a child's development. However, examining small children with behavioural methods is often difficult. Research with ERPs (event-related potentials), recorded with EEG (electroencephalography), does not require attention or action from the child. Especially in children's ERP research, it is essential that the duration of a recording session is not too long. A new, faster optimum paradigm has been developed to record MMN (mismatch negativity), where ERPs to several sound features can be recorded in one recording session. This substantially shortens the time required for the experiment. So far, the new paradigm has been used in adult and school-aged children research. This study examines if MMN, LDN (late discriminative negativity) and P3a components can be recorded in two-year-olds with the new paradigm. The standard stimulus (p=0.50) was an 80 dB harmonic tone consisting of three harmonic frequencies (500 Hz, 1000 Hz and 1500 Hz) with a duration of 200 ms. The loudness deviants (p=0.067) were at a level of +6 dB or -6 dB compared to the standards. The frequency deviants (p=0.112) had a fundamental frequency of 550 or 454.4 Hz (small deviation), 625 or 400 Hz (medium deviation) or 750 or 333.3 Hz (large deviation). The duration deviants (p=0.112) had a duration of 175 ms (small deviation), 150 ms (medium deviation) or 100 ms (large deviation). The direction deviants (p=0.067) were presented from the left or right loudspeaker only. The gap deviant (p=0.067) included a 5-ms silent gap in the middle of the sound. Altogether 17 children participated in the experiment, of whom the data of 12 children was used in the analysis. ERP components were observed for all deviant types. The MMN was significant for duration and gap deviants. The LDN was significant for the large duration deviant and all other deviant types. No significant P3a was observed. These results indicate that the optimum paradigm can be used with two-year-olds. With this paradigm, data on several sound features can be recorded in a shorter time than with the previous paradigms used in ERP research.
Resumo:
Much research in understanding plant diseases has been undertaken, but there has been insufficient attention given to dealing with coordinated approaches to preventing and managing diseases. A global management approach is essential to the long-term sustainability of banana production. This approach would involve coordinated surveys, capacity building in developing countries, development of disease outbreak contingency plans and coordinated quarantine awareness, including on-line training in impact risk assessment and web-based diagnostic software. Free movement of banana plants and products between some banana-producing countries is causing significant pressure on the ability to manage diseases in banana. The rapid spread of Fusarium oxysporum f. sp. cubense 'tropical race 4' in Asia, bacterial wilts in Africa and Asia and black leaf streak [Mycosphaerella fijiensis] in Brazil and elsewhere are cases in point. The impact of these diseases is devastating, severely cutting family incomes and jeopardising food security around the globe. Agreements urgently need to be reached between governments to halt the movement of banana plants and products between banana-producing countries before it is too late and global food security is irreparably harmed. Black leaf streak, arguably the most serious banana disease, has become extremely difficult to control in commercial plantations in various parts of the world. Sometimes in excess of 50 fungicide sprays have to be applied each year. Disease eradication and effective disease control is not possible because there is no control of disease inoculum in non-commercial plantings in these locations. Additionally, there have been enormous sums of money invested in international banana breeding programmes over many years only to see the value of hybrid products lost too soon. 'Goldfinger' (AAAB, syn. 'FHIA-01'), for example, has recently been observed severely affected by black leaf streak in Samoa. Resistant cultivars alone cannot be relied upon in the fight against this disease. Real progress in control may only come when the local communities are engaged and become actively involved in regional programmes. Global recommendations are long overdue and urgently needed to help ensure the long-term sustainable utilisation of the products of the breeding programmes.
Resumo:
The main focus of this research was to describe the educational purpose of Christian schools within their operation culture. The Christian schools founded in Finland can be seen as part of a greater movement in Europe. In this research the dialogue and encounter in the educational scheme of Finnish Christian schools were examined by asking three research questions: 1. What is the nature of the dialogue in education in Finnish Christian schools? 2. How do the teachers describe themselves as educators? 3. What are the special characteristics in the operation culture of a Christian school? The educational relationship was regarded as fundamental and in the background reflected the absolute value of each student. Communication skills were viewed as essential in the building of relationships, which also included emotion communication skills as a broader view. The teachers expressed their comprehension of the meaning of the dialogue in the building of a relationship with practical examples. Students learned to understand one another's experiences by discussion and listening to one another. The values that created a connection were mutual appreciation, honesty, taking the other one into account, and the ability for empathy. Caring was regarded as a relationship between people, as well as a genuine mutual encounter, in which all parties would listen to one another and be heard by others. The respondents thought that individual attention and time were the keys to reaching well-being and an encounter. Students' commitment to the community was supported by mutual agreements, identifying with the common world, and encounters. The appearance of Christian love agape was named as the basis for an educational relationship. The answers emphasised shared everyday life at school. According to the teachers, the willingness for personal growth enabled encounters, although growth as such was often regarded as difficult. Cognitive emphasising and emotional experiencing from a dynamic perspective, were the means by which students' ethical understanding was comprehended. The teachers named three key factors to create a confidential relationship: a respectful attitude, courage, and genuineness. Within the school operational environment, a sense of community was emphasised, in which each student was taken into account individually. The active role of parents was an essential part of the school culture. The administration of the schools appeared committed. The additional pressure in school work came from efforts to ensure the official status of the school, as well as the large amount of administrative work involved in a private school. According to the research data, there was no evidence to support any elitism that is often associated with private schools.
Resumo:
The crucial questions that define democracy relate to its depth and width: who can participate in decision making and what kind of things can be commonly decided? Theories deeper than representative democracy emphasize discussion, in which by evaluating justifications it is possible to achieve consensus in ideal situation. The aim of my research is to develop tools for promoting the participation of third graders in decision making in the classroom. In addition I study the development of depth and width of democracy in the classroom, the development of skills and competencies in the decision making and the challenges of the project. My research method is participative action research. I collected my data between October 2007 and March 2008. I used videos and observation diaries as my primary data. Additional data consisted of the interviews of the students, the conversations between the adults and the material produced by the teacher. Since we discussed the matters students had highlighted in specific lessons, my analysis proceeds according to these lessons constructing a general view of the process. The width and depth of classroom democracy are difficult to define. Though the system we had created enabled third graders to discuss matters they found important the participation was unequal: some of the students couldn’t among other things give justifications for their opinions. This poses challenges for models that emphasize deliberation since these theories presuppose that everyone has concordant competencies. But then again only critical citizens who are able to make justifications and to evaluate them are able to oppose indoctrination. This makes teaching these competencies justified. Different decision making procedures define the classroom democracy. Deliberation doesn’t necessarily provide deeper information about the preferences of the participants than mere voting. But then again voting doesn’t express the reasons which support one’s preferences. Structured conversation can equalize the time used for every participant’s opinions, but doesn’t solve the challenge of unequal competencies. Children’s suggestion box diversified the possibilities to participate, and also the silent ones used it during the research. The asymmetry in deliberation might also be caused by the social structure of the students. Teacher’s directing and participation encouraging role in deliberation was significant. Diversifying the participation by different roles could equalize the asymmetry in participation.
Resumo:
We compared daily net radiation (Rn) estimates from 19 methods with the ASCE-EWRI Rn estimates in two climates: Clay Center, Nebraska (sub-humid) and Davis, California (semi-arid) for the calendar year. The performances of all 20 methods, including the ASCE-EWRI Rn method, were then evaluated against Rn data measured over a non-stressed maize canopy during two growing seasons in 2005 and 2006 at Clay Center. Methods differ in terms of inputs, structure, and equation intricacy. Most methods differ in estimating the cloudiness factor, emissivity (e), and calculating net longwave radiation (Rnl). All methods use albedo (a) of 0.23 for a reference grass/alfalfa surface. When comparing the performance of all 20 Rn methods with measured Rn, we hypothesized that the a values for grass/alfalfa and non-stressed maize canopy were similar enough to only cause minor differences in Rn and grass- and alfalfa-reference evapotranspiration (ETo and ETr) estimates. The measured seasonal average a for the maize canopy was 0.19 in both years. Using a = 0.19 instead of a = 0.23 resulted in 6% overestimation of Rn. Using a = 0.19 instead of a = 0.23 for ETo and ETr estimations, the 6% difference in Rn translated to only 4% and 3% differences in ETo and ETr, respectively, supporting the validity of our hypothesis. Most methods had good correlations with the ASCE-EWRI Rn (r2 > 0.95). The root mean square difference (RMSD) was less than 2 MJ m-2 d-1 between 12 methods and the ASCE-EWRI Rn at Clay Center and between 14 methods and the ASCE-EWRI Rn at Davis. The performance of some methods showed variations between the two climates. In general, r2 values were higher for the semi-arid climate than for the sub-humid climate. Methods that use dynamic e as a function of mean air temperature performed better in both climates than those that calculate e using actual vapor pressure. The ASCE-EWRI-estimated Rn values had one of the best agreements with the measured Rn (r2 = 0.93, RMSD = 1.44 MJ m-2 d-1), and estimates were within 7% of the measured Rn. The Rn estimates from six methods, including the ASCE-EWRI, were not significantly different from measured Rn. Most methods underestimated measured Rn by 6% to 23%. Some of the differences between measured and estimated Rn were attributed to the poor estimation of Rnl. We conducted sensitivity analyses to evaluate the effect of Rnl on Rn, ETo, and ETr. The Rnl effect on Rn was linear and strong, but its effect on ETo and ETr was subsidiary. Results suggest that the Rn data measured over green vegetation (e.g., irrigated maize canopy) can be an alternative Rn data source for ET estimations when measured Rn data over the reference surface are not available. In the absence of measured Rn, another alternative would be using one of the Rn models that we analyzed when all the input variables are not available to solve the ASCE-EWRI Rn equation. Our results can be used to provide practical information on which method to select based on data availability for reliable estimates of daily Rn in climates similar to Clay Center and Davis.
Resumo:
This submission responds to the document Intellectual Property Arrangements Issues Paper (Issues Paper) released by the Productivity Commission in October 2015 for public consultation and input by 30 November 2015. The API is grateful for the extension of time granted by the Commission to complete and lodge this submission. The overall need for an inquiry into intellectual property is supported by API. In particular it is noted with approval that the Commission states in its Issues Paper that it is to consider the appropriate balance between “incentives for innovation and investments, and the interests of both individuals and businesses in assessing products”.1 However, API is of the view that intellectual property in the area of real property presents a number of issues which are not fully canvassed in the abovementioned Issues Paper. Intellectual property embedded in valuation and other property-related reports of API members involves the acquisition of information which may possibly be confidential. Yet, when engaged in banks and financial institutions the intellectual property in such valuations and/ or reports is commonly required to be passed to the client bank or financial institution. In the Issues Paper it is proposed that there are seven different forms of intellectual property rights.2 It is the view of API that an eight form exists, namely private agreements. The Issues Paper, however, regards private agreements between firms as alternatives to intellectual property rights. The API considers that “secrecy or confidentiality arrangements”3 as identified in the Issues Paper form a much larger part of the manner in which intellectual property is maintained in Australia for the purposes of trade secrecy or more often, financial confidentiality...
Resumo:
Commercialisation agreements supporting plantation development, carbon sequestration, climate change of hardwood species in Queensland.
Resumo:
Conceptual advances in the field of membrane transport have, in the main, utilized artificial membranes, both planar and vesicular. Systems of biological interest,viz., cells and organelles, resemble vesicles in size and geometry. Methods are, therefore, required to extend the results obtained with planar membranes to liposome systems. In this report we present an analysis of a fluorescence technique, using the divalent cation probe chlortetracycline, in small, unilamellar vesicles, for the study of divalent cation fluxes. An ion carrier (X537 A) and a pore former (alamethicin) have been studied. The rate of rise of fluorescence signal and the transmembrane ion gradient have been related to transmembrane current and potential, respectively. A second power dependence of ion conduction-including the electrically silent portion thereof — on X537 A concentration, has been observed. An exponential dependence of ldquocurrentrdquo on ldquotransmembrane potentialrdquo in the case of alamethicin is also confirmed. Possible errors in the technique are discussed.
Resumo:
Australian utility pole network is aging and reaching its end of life, with 70% of the 5 million poles currently in-service nationally installed within the 20 years following the end of World War II. The estimated investment required for the replacement or remedial maintenance of the aging 3.5 millions poles is as high as 1.75 billion dollars. Additionally, an estimated 21,700 high-durability new poles are required each year, representing further investment of 13.5 million dollars per year. Yet, agreements which progressively phase out logging of native forests around Australia have been signed, giving the industry about 25 years to make the transition from Crown native forests to plantations and private forests. As utility poles were traditionally cut from native forest hardwood species, finding solutions to source new poles currently presents a challenge. This paper presents tests on Veneer Based Composite hardwood hollow utility poles manufactured from Gympie messmate (Eucalyptus cloeziana) plantation thinning. Small diameter poles of nominal 115 mm internal diameter and 15 mm wall-thickness were manufactured in two half-poles butt jointed together, using 9 veneers per halfpole. The poles were tested in bending and shear, and experimental test results are presented. The mechanical performance of the hollow poles is discussed and compared to hardwood poles cut from mature trees and of similar size. Future research and different options for improving the current concept are proposed in order to provide a more reliable and cost effective technical solution to the current shortage of utility poles. © RILEM 2014.
Resumo:
Achieving sustainable consumption patterns is a crucial step on the way towards sustainability. The scientific knowledge used to decide which priorities to set and how to enforce them has to converge with societal, political, and economic initiatives on various levels: from individual household decision-making to agreements and commitments in global policy processes. The aim of this thesis is to draw a comprehensive and systematic picture of sustainable consumption and to do this it develops the concept of Strong Sustainable Consumption Governance. In this concept, consumption is understood as resource consumption. This includes consumption by industries, public consumption, and household consumption. Next to the availability of resources (including the available sink capacity of the ecosystem) and their use and distribution among the Earth’s population, the thesis also considers their contribution to human well-being. This implies giving specific attention to the levels and patterns of consumption. Methods: The thesis introduces the terminology and various concepts of Sustainable Consumption and of Governance. It briefly elaborates on the methodology of Critical Realism and its potential for analysing Sustainable Consumption. It describes the various methods on which the research is based and sets out the political implications a governance approach towards Strong Sustainable Consumption may have. Two models are developed: one for the assessment of the environmental relevance of consumption activities, another to identify the influences of globalisation on the determinants of consumption opportunities. Results: One of the major challenges for Strong Sustainable Consumption is that it is not in line with the current political mainstream: that is, the belief that economic growth can cure all our problems. So, the proponents have to battle against a strong headwind. Their motivation however is the conviction that there is no alternative. Efforts have to be taken on multiple levels by multiple actors. And all of them are needed as they constitute the individual strings that together make up the rope. However, everyone must ensure that they are pulling in the same direction. It might be useful to apply a carrot and stick strategy to stimulate public debate. The stick in this case is to create a sense of urgency. The carrot would be to articulate better the message to the public that a shrinking of the economy is not as much of a disaster as mainstream economics tends to suggest. In parallel to this it is necessary to demand that governments take responsibility for governance. The dominant strategy is still information provision. But there is ample evidence that hard policies like regulatory instruments and economic instruments are most effective. As for Civil Society Organizations it is recommended that they overcome the habit of promoting Sustainable (in fact green) Consumption by using marketing strategies and instead foster public debate in values and well-being. This includes appreciating the potential of social innovation. A countless number of such initiatives are on the way but their potential is still insufficiently explored. Beyond the question of how to multiply such approaches, it is also necessary to establish political macro structures to foster them.
Resumo:
Australia’s utility pole network is aging and approaching its end of life. It is estimated that 70% of the 5 million poles currently in-service nationally were installed within the 20 years following the end of World War II and require replacement or remedial maintenance. Additionally, an estimated 21,700 high-durability new poles are required each year to support the expansion of the energy network. Utility poles were traditionally cut from native forest hardwood species. However, due to agreements which progressively phase out logging of native forests around Australia, finding new sources for utility poles presents a challenge. This paper presents the development of veneer based composite hardwood hollow utility poles manufactured from mid-rotation Gympie messmate (Eucalyptus cloeziana) plantation thinned trees (also referred to as “thinning”), as an alternative to solid hardwood poles. The incentives behind the project and benefits of the proposed products are introduced in the paper. Small diameter poles, of nominal 115 mm internal diameter and 15 mm wall-thickness, were manufactured in two half-poles butt jointed together, using 9 hardwood veneers per half-pole. The poles were tested in bending and shear, and experimental test results are presented. The mechanical performance of the hollow poles is discussed and compared to hardwood poles sourced from mature trees and of similar size. Additionally, the required dimensions of the proposed hollow pole to replace actual solid poles are estimated. Results show that the proposed product represents a viable technical solution to the current shortage of utility poles. Future research and different options for improving the current concept are proposed in order to provide a more reliable and cost effective product for structural and architectural applications in general.