Sensor-based Control of Chewing and Rumination Behavior of Dairy Cows

The measurement of feed intake, feeding time and rumination time, summarized by the term feeding behavior, are helpful indicators for early recognition of animals which show deviations in their behavior. The overall objective of this work was the development of an early warning system for inadequate feeding rations and digestive and metabolic disorders, which prevention constitutes the basis for health, performance, and reproduction. In a literature review, the current state of the art and the suitability of different measurement tools to determine feeding behavior of ruminants was discussed. Five measurement methods based on different methodological approaches (visual observance, pressure transducer, electrical switches, electrical deformation sensors and acoustic biotelemetry), and three selected measurement techniques (the IGER Behavior Recorder, the Hi-Tag rumination monitoring system and RumiWatchSystem) were described, assessed and compared to each other within this review. In the second study, the new system for measuring feeding behavior of dairy cows was evaluated. The measurement of feeding behavior ensues through electromyography (EMG). For validation, the feeding behavior of 14 cows was determined by both the EMG system and by visual observation. The high correlation coefficients indicate that the current system is a reliable and suitable tool for monitoring the feeding behavior of dairy cows. The aim of a further study was to compare the DairyCheck (DC) system and two additional measurement systems for measuring rumination behavior in relation to efficiency, reliability and reproducibility, with respect to each other. The two additional systems were labeled as the Lely Qwes HR (HR) sensor, and the RumiWatchSystem (RW). Results of accordance of RW and DC to each other were high. The last study examined whether rumination time (RT) is affected by the onset of calving and if it might be a useful indicator for the prediction of imminent birth. Data analysis referred to the final 72h before the onset of calving, which were divided into twelve 6h-blocks. The results showed that RT was significantly reduced in the final 6h before imminent birth.

Asymptotic model for shape resonance control of diatomics by intense non-resonant light: universality in the single-channel approximation

Non-resonant light interacting with diatomics via the polarizability anisotropy couples different rotational states and may lead to strong hybridization of the motion. The modification of shape resonances and low-energy scattering states due to this interaction can be fully captured by an asymptotic model, based on the long-range properties of the scattering (Crubellier et al 2015 New J. Phys. 17 045020). Remarkably, the properties of the field-dressed shape resonances in this asymptotic multi-channel description are found to be approximately linear in the field intensity up to fairly large intensity. This suggests a perturbative single-channel approach to be sufficient to study the control of such resonances by the non-resonant field. The multi-channel results furthermore indicate the dependence on field intensity to present, at least approximately, universal characteristics. Here we combine the nodal line technique to solve the asymptotic Schrödinger equation with perturbation theory. Comparing our single channel results to those obtained with the full interaction potential, we find nodal lines depending only on the field-free scattering length of the diatom to yield an approximate but universal description of the field-dressed molecule, confirming universal behavior.

Heterogeneous Multi-Robot Cooperation

This report addresses the problem of achieving cooperation within small- to medium- sized teams of heterogeneous mobile robots. I describe a software architecture I have developed, called ALLIANCE, that facilitates robust, fault tolerant, reliable, and adaptive cooperative control. In addition, an extended version of ALLIANCE, called L-ALLIANCE, is described, which incorporates a dynamic parameter update mechanism that allows teams of mobile robots to improve the efficiency of their mission performance through learning. A number of experimental results of implementing these architectures on both physical and simulated mobile robot teams are described. In addition, this report presents the results of studies of a number of issues in mobile robot cooperation, including fault tolerant cooperative control, adaptive action selection, distributed control, robot awareness of team member actions, improving efficiency through learning, inter-robot communication, action recognition, and local versus global control.

Modeling, Estimation, and Control of Robot-Soil Interactions

This thesis presents the development of hardware, theory, and experimental methods to enable a robotic manipulator arm to interact with soils and estimate soil properties from interaction forces. Unlike the majority of robotic systems interacting with soil, our objective is parameter estimation, not excavation. To this end, we design our manipulator with a flat plate for easy modeling of interactions. By using a flat plate, we take advantage of the wealth of research on the similar problem of earth pressure on retaining walls. There are a number of existing earth pressure models. These models typically provide estimates of force which are in uncertain relation to the true force. A recent technique, known as numerical limit analysis, provides upper and lower bounds on the true force. Predictions from the numerical limit analysis technique are shown to be in good agreement with other accepted models. Experimental methods for plate insertion, soil-tool interface friction estimation, and control of applied forces on the soil are presented. In addition, a novel graphical technique for inverting the soil models is developed, which is an improvement over standard nonlinear optimization. This graphical technique utilizes the uncertainties associated with each set of force measurements to obtain all possible parameters which could have produced the measured forces. The system is tested on three cohesionless soils, two in a loose state and one in a loose and dense state. The results are compared with friction angles obtained from direct shear tests. The results highlight a number of key points. Common assumptions are made in soil modeling. Most notably, the Mohr-Coulomb failure law and perfectly plastic behavior. In the direct shear tests, a marked dependence of friction angle on the normal stress at low stresses is found. This has ramifications for any study of friction done at low stresses. In addition, gradual failures are often observed for vertical tools and tools inclined away from the direction of motion. After accounting for the change in friction angle at low stresses, the results show good agreement with the direct shear values.

Coordinating Inventory Control and Pricing Strategies with Random Demand and Fixed Ordering Cost: The Finite Horizon Case

We analyze a finite horizon, single product, periodic review model in which pricing and production/inventory decisions are made simultaneously. Demands in different periods are random variables that are independent of each other and their distributions depend on the product price. Pricing and ordering decisions are made at the beginning of each period and all shortages are backlogged. Ordering cost includes both a fixed cost and a variable cost proportional to the amount ordered. The objective is to find an inventory policy and a pricing strategy maximizing expected profit over the finite horizon. We show that when the demand model is additive, the profit-to-go functions are k-concave and hence an (s,S,p) policy is optimal. In such a policy, the period inventory is managed based on the classical (s,S) policy and price is determined based on the inventory position at the beginning of each period. For more general demand functions, i.e., multiplicative plus additive functions, we demonstrate that the profit-to-go function is not necessarily k-concave and an (s,S,p) policy is not necessarily optimal. We introduce a new concept, the symmetric k-concave functions and apply it to provide a characterization of the optimal policy.

Coordinating Inventory Control and Pricing Strategies with Random Demand and Fixed Ordering Cost: the Infinite Horizon Case

We analyze an infinite horizon, single product, periodic review model in which pricing and production/inventory decisions are made simultaneously. Demands in different periods are identically distributed random variables that are independent of each other and their distributions depend on the product price. Pricing and ordering decisions are made at the beginning of each period and all shortages are backlogged. Ordering cost includes both a fixed cost and a variable cost proportional to the amount ordered. The objective is to maximize expected discounted, or expected average profit over the infinite planning horizon. We show that a stationary (s,S,p) policy is optimal for both the discounted and average profit models with general demand functions. In such a policy, the period inventory is managed based on the classical (s,S) policy and price is determined based on the inventory position at the beginning of each period.

A Multi-scale Model for Copper Dishing in Chemical-Mechanical Polishing

The present success in the manufacture of multi-layer interconnects in ultra-large-scale integration is largely due to the acceptable planarization capabilities of the chemical-mechanical polishing (CMP) process. In the past decade, copper has emerged as the preferred interconnect material. The greatest challenge in Cu CMP at present is the control of wafer surface non-uniformity at various scales. As the size of a wafer has increased to 300 mm, the wafer-level non-uniformity has assumed critical importance. Moreover, the pattern geometry in each die has become quite complex due to a wide range of feature sizes and multi-level structures. Therefore, it is important to develop a non-uniformity model that integrates wafer-, die- and feature-level variations into a unified, multi-scale dielectric erosion and Cu dishing model. In this paper, a systematic way of characterizing and modeling dishing in the single-step Cu CMP process is presented. The possible causes of dishing at each scale are identified in terms of several geometric and process parameters. The feature-scale pressure calculation based on the step-height at each polishing stage is introduced. The dishing model is based on pad elastic deformation and the evolving pattern geometry, and is integrated with the wafer- and die-level variations. Experimental and analytical means of determining the model parameters are outlined and the model is validated by polishing experiments on patterned wafers. Finally, practical approaches for minimizing Cu dishing are suggested.

A Multi-scale Model for Copper Dishing in Chemical-Mechanical Polishing

The present success in the manufacture of multi-layer interconnects in ultra-large-scale integration is largely due to the acceptable planarization capabilities of the chemical-mechanical polishing (CMP) process. In the past decade, copper has emerged as the preferred interconnect material. The greatest challenge in Cu CMP at present is the control of wafer surface non-uniformity at various scales. As the size of a wafer has increased to 300 mm, the wafer-level non-uniformity has assumed critical importance. Moreover, the pattern geometry in each die has become quite complex due to a wide range of feature sizes and multi-level structures. Therefore, it is important to develop a non-uniformity model that integrates wafer-, die- and feature-level variations into a unified, multi-scale dielectric erosion and Cu dishing model. In this paper, a systematic way of characterizing and modeling dishing in the single-step Cu CMP process is presented. The possible causes of dishing at each scale are identified in terms of several geometric and process parameters. The feature-scale pressure calculation based on the step-height at each polishing stage is introduced. The dishing model is based on pad elastic deformation and the evolving pattern geometry, and is integrated with the wafer- and die-level variations. Experimental and analytical means of determining the model parameters are outlined and the model is validated by polishing experiments on patterned wafers. Finally, practical approaches for minimizing Cu dishing are suggested.

Experimental Modeling and Control Strategies on an Open Mobile Robot Platform PRIM

This research work deals with the problem of modeling and design of low level speed controller for the mobile robot PRIM. The main objective is to develop an effective educational tool. On one hand, the interests in using the open mobile platform PRIM consist in integrating several highly related subjects to the automatic control theory in an educational context, by embracing the subjects of communications, signal processing, sensor fusion and hardware design, amongst others. On the other hand, the idea is to implement useful navigation strategies such that the robot can be served as a mobile multimedia information point. It is in this context, when navigation strategies are oriented to goal achievement, that a local model predictive control is attained. Hence, such studies are presented as a very interesting control strategy in order to develop the future capabilities of the system

Predictive motion control of a mirosot mobile robot

This paper discusses predictive motion control of a MiRoSoT robot. The dynamic model of the robot is deduced by taking into account the whole process - robot, vision, control and transmission systems. Based on the obtained dynamic model, an integrated predictive control algorithm is proposed to position precisely with either stationary or moving obstacle avoidance. This objective is achieved automatically by introducing distant constraints into the open-loop optimization of control inputs. Simulation results demonstrate the feasibility of such control strategy for the deduced dynamic model

Análisis de los factores de éxito y fracaso del control social a la gestión pública estatal. Estudio de caso: la experiencia de la Red ciudadana de control social en Bienestar –componente discapacidad en Bogotá D.C

La presente monografía examina los alcances reales del Control Social a la Gestión Pública estatal desde el análisis de factores de éxito y fracaso, tomando como caso de estudio a la Red ciudadana de control social en Bienestar – componente discapacidad en Bogotá D.C. Este tipo de control fue concebido en marco normativo del país para prevenir actos corruptos y para que contribuyera al mejoramiento de la administración pública, haciéndola más acorde a las necesidades de la ciudadanía. Ahora bien, por lo que implica cumplir estas funciones, el control social se enfrenta a múltiples circunstancias que lo influyen positiva y negativamente, que determinan los efectos que pueda producir a nivel estatal y ciudadano. Para cumplir con este objetivo y a la luz del Enfoque Sistémico, se diseñó un modelo que permitiera identificar factores de éxito y fracaso basado en tres elementos básicos (organización, conocimiento y comunicación) que posibilitan caracterizar factores reconocidos en la bibliografía y otros nuevos que los provee el análisis de la experiencia, y que resultan hallazgos importantes por cuanto no se habían incluido hasta el momento en ningún recurso bibliográfico. En conclusión, se demuestra que mediante ciertas prácticas y acciones concretas los ciudadanos pueden incidir lícitamente en las actividades estatales, transformando la gestión pública y produciendo una mayor apropiación de lo público por parte de los ciudadanos.

Bacteriemia asociada a catéter epicutáneo en la unidad de cuidado intensivo neonatal de la Fundación Cardioinfantil

La bacteriemia asociada a catéter afecta a pacientes en las unidades de cuidado intensivo con una alta morbilidad, mortalidad y aumento de los costos al sistema de salud. Los recién nacidos son la población de más alto riesgo por el mayor uso de catéteres centrales. Objetivo: Caracterizar factores de riesgo para bacteriemia asociada a catéter en la Unidad de Cuidado Intensivo Neonatal de la Fundación Cardioinfantil entre 2005 - 2010 Materiales y método: Estudio descriptivo de corte transversal, incluyó todos los recién nacidos con diagnostico de bacteriemia asociada a catéter. Se analizó la información utilizando frecuencias y medidas de tendencia central. Resultados: Se encontraron 50 pacientes con diagnostico de bacteriemia asociada a catéter. 50% de género masculino, 52% con edad gestacional al nacimiento menor a 36 semanas y 24% con peso menor a 1500 gramos al momento de la inserción del catéter. La edad fue de 24.2 días al momento de la inserción del catéter. En el 66% de los pacientes el sitio de inserción fue el miembro superior, siendo el Sthaphylococcus Epidermidis el germen con el 50% de las bacteriemias. Conclusión: La bacteriemia asociada a catéter afecta paciente prematuros, de bajo peso sin diferencias en genero. La manipulación de dichos dispositivos, el sitio de inserción, el uso previo de antibióticos, la duración del catéter y el uso de nutrición parenteral son factores que están asociados al mayor riesgo de infección. Siendo el Staphylococcus Epidermidis el germen mas frecuente.

Determinación de los efectos en la salud de los trabajadores del programa de control de vectores expuestos laboralmente a organoclorados en tres departamentos de Colombia 2013

Objetivo: Evaluar la exposición a plaguicidas organoclorados empleados en salud publica en la población trabajadora del programa de control de vectores en tres regiones de Colombia en 2013. Métodos: Se realizó un estudio descriptivo de corte transversal en el grupo de trabajadores del programa de control de enfermedades transmitidas por vectores -ETV- (coordinadores, técnicos, entomólogos, técnicos y auxiliares) de los departamentos de Meta, Nariño y Risaralda. A todos los participantes se les realizó una entrevista en la cual se recogió, mediante cuestionario, información de las tres variables de muestreo: sociodemográficas, ocupacionales, clínicas y toxicológicas. Se determinaron los niveles de 13 organoclorados en suero mediante cromatografía de gases en el Instituto Nacional de Salud. Se llevó a cabo un análisis descriptivo y se llevo a cabo un análisis para determinar la distribución de medias entre variables de exposición ocupacional (Ji2 para cualitativas y U de Mann-Whitney para cuantitativas). Posteriormente, se llevó a cabo un análisis multivariado para estimar la asociación controlando por variables de antigüedad, exposición laboral a organoclorados. Resultados: El reporte de manipulación de insecticidas organoclorados fue del 39,1%. El 100% de los trabajadores que usaron organoclorados refirieron el uso DDT. El 7,5% (n=3) refirieron el uso de Aldrin. Los organoclorados fueron hexaclorbenceno, hexaclorocicloexano, heptacloro, heptaclorepoxi, α-Clordano, 4,4-DDT, 4,4-DDE, β -endosulfan, 2,4- DDT, endosulfan sulfato y mirex. Los organoclorados con niveles pico más altos fueron β-HCH, 4,4- DDT y α –HCH. Los síntomas de mayor presentación fueron: cefalea 28,7%, mareo 29,9%, disminución de fuerza en MMSS 17,2% y síntomas neurosiquiátricos.

Diseño de un modelo de intervención del suicidio en niños y adolescentes

Resumen El objetivo de este estudio fue el de diseñar un modelo de intervención para la prevención del suicidio en la población escolar de niños y adolescentes, con 72 participantes de un colegio público y un colegio privado de la ciudad de Bogotá. Se caracterizó el suicidio en la ciudad de Bogotá en los últimos nueve años, los aspectos legales, se analizaron algunos modelos de prevención, se identificaron los principales factores de riesgo y factores protectores y se propusieron estrategias para su prevención. Este modelo está basado en la administración social del riesgo y los factores protectores y de riesgo, susceptibles de modificación. Se realizó una prueba de tamizaje y fueron utilizados: el Inventario de depresión infantil (CDI de Kovacs), la escala de desesperanza de Beck y la escala de ansiedad para niños y adolescentes de Spence, validadas a nivel internacional. Se observó una correlación positiva (0.490) mediante el coeficiente de rangos de Spearman, con una significación de 0,01 (bilateral) para los tres factores de riesgo. Se hace entrega de un manual de instrucción para la intervención temprana del suicidio en esta población y un folleto informativo dirigido a padres de familia sobre los factores de riesgo y factores protectores. A partir de esto se plantean implicaciones futuras.

Establecimiento de un sistema para el monitoreo y control de la contaminación cruzada en el laboratorio de análisis microbiológico de alimentos durante 2009

Dentro de las actividades para el control de calidad en el laboratorio, los resultados finales de un analito en particular son considerados productos intermedios, dada la pertinencia otorgada al aseguramiento de la calidad como fin último de los programas de gestión de la calidad. Esta concepción precisa el establecimiento de instrumentos integrales para la detección de eventos como la contaminación cruzada y la adopción de medidas para evitar que se afecte la marcha analítica. Objetivo: el objetivo principal fue establecer un sistema para el monitoreo y control de la contaminación cruzada en el laboratorio de análisis microbiológico de alimentos. Materiales y métodos: la metodología empleada consistió en desarrollar diagramas de flujo para los procedimientos sobre el control de las poblaciones de mesófilos aerobios y mohos provenientes de la contaminación en los ambientes, superficies, material estéril y medios de cultivos. Dichos diagramas incluyeron un árbol de decisiones, diseñado para efectuar acciones de control con base en los intervalos de tolerancia, establecidos como herramienta objetiva hacia la toma de decisiones que normalicen los recuentos de las poblaciones microbianas en cuestión. Resultados: los límites de alerta más estrictos se obtuvieron para las poblaciones de mesófilos aerobios y mohos en los diferentes controles, excepto para el ambiente del área de preparación de medios y los correspondientes al material estéril. Conclusión: el proceso desarrollado permitió complementar el sistema de control de calidad interno en el laboratorio, al disponer de un medio objetivo para el cierre de no conformidades por contaminación cruzada.