Switching mode power amplifier for bluetooth applications

Modern fully integrated transceivers architectures, require circuits with low area, low cost, low power, and high efficiency. A key block in modern transceivers is the power amplifier, which is deeply studied in this thesis. First, we study the implementation of a classical Class-A amplifier, describing the basic operation of an RF power amplifier, and analysing the influence of the real models of the reactive components in its operation. Secondly, the Class-E amplifier is deeply studied. The different types of implementations are reviewed and theoretical equations are derived and compared with simulations. There were selected four modes of operation for the Class-E amplifier, in order to perform the implementation of the output stage, and the subsequent comparison of results. This led to the selection of the mode with the best trade-off between efficiency and harmonics distortion, lower power consumption and higher output power. The optimal choice was a parallel circuit containing an inductor with a finite value. To complete the implementation of the PA in switching mode, a driver was implemented. The final block (output stage together with the driver) got 20 % total efficiency (PAE) transmitting 8 dBm output power to a 50 W load with a total harmonic distortion (THD) of 3 % and a total consumption of 28 mW. All implementations are designed using standard 130 nm CMOS technology. The operating frequency is 2.4 GHz and it was considered an 1.2 V DC power supply. The proposed circuit is intended to be used in a Bluetooth transmitter, however, it has a wider range of applications.

Analysis of a controversial decision process: the case of the pumped hydro storage power plant Atdorf in Germany

Based on the report for the unit “Métodos Interactivos de Participação e Decisão A” (Interactive methods of participation and decision A), coordinated by Prof. Lia Maldonado Teles de Vasconcelos and Prof. Nuno Miguel Ribeiro Videira Costa. This unit was provided for the PhD Program in Technology Assessment in 2015/2016.

Caraterização metrológica de contadores de micro caudal

Nas últimas décadas, as empresas têm sido sujeitas a uma maior concorrência, ao desenvolvimento tecnológico mais acelerado e a novos desafios no que respeita à qualidade. A Metrologia deverá assim acompanhar estas tendências do mercado. O Departamento de Metrologia (DMET) do Instituto Português da Qualidade, I.P. (IPQ) tem vindo a desenvolver esforços significativos que visam a melhoria contínua das técnicas e dos processos de medição e de calibração realizados nos laboratórios. A presente dissertação de mestrado foi realizada no Laboratório de Volume e Caudal (LVC) do DMET. Os objetivos iniciais do trabalho centraram-se na caraterização metrológica de contadores de fluidos, tendo como base a medição do caudal, utilizando como método de referência o método gravimétrico. De forma a validar o sistema de medição foram realizados ensaios entre 1 mL/h a 100 mL/h, em condições de reprodutibilidade, com dois sistemas padrão distintos de acordo com o caudal a ensaiar. Em todos os ensaios efetuados foi necessário monitorizar as condições ambientais, i.e. temperatura, pressão atmosférica, humidade relativa e a temperatura do líquido padrão, para a aplicação das correções necessárias. Outro feito importante foi a caraterização das fontes de incerteza, que permitiram caraterizar o resultado das medições. A metodologia utilizada para a avaliação e para a estimativa da incerteza de medição encontra-se descrita no Guide to the Expression of Uncertainty in Measurement (GUM). Neste projeto foram contempladas fontes de incerteza como as associadas à evaporação, à impulsão do tubo, à resolução da balança, entre outras. Com os resultados obtidos foi possível elaborar um procedimento técnico para a Calibração de Caudalímetros de Líquidos. Os resultados obtidos permitiram garantir a rastreabilidade das medições de caudal de líquidos ao SI, essencial para a calibração de equipamentos no Laboratório Nacional de Metrologia (LNM) do IPQ, nomeadamente para micro caudalímetros no intervalo de medição entre 0,12 mL/h e 600 mL/h.

Has the time for renewables finally arrived? – An event study on EPA’s Clean Power Plan

The recent proposals presented by EPA aimed to reduce the dependency of fossil fuels and to lower current emissions levels, hoping to gradually shift electric generation units to renewable energy sources. Actually, the Final Rule Proposal announcement day exhibited a negative Abnormal Return on Fossil Fuels but the following days had positive Abnormal Returns, mostly due to legislative change perceived by financial markets which eased up implementation periods of the proposed measures in the Final Rule when compared to the Draft Rule. Oppositely, Renewables and Solar Portfolios exhibited negative Cumulative Abnormal Returns over the period surrounding the Final Rule.

Cumprimento de ordens, obediência hierárquica e disciplina militar versus perpetração (in)voluntária de crimes

Following orders, hierarchical obedience and military discipline are essential values for the survival of the armed forces. Without them, it is not possible to conceive the armed forces as an essential pillar of a democratic state of law and a guarantor of national independence. As issuing orders as well as receiving and following them are inextricably linked to military discipline, and as such injunctions entail the workings of a particular obedience regime within the specific kind of organized power framework which is the Armed Forces, only by analysing the importance of such orders within this microcosm – with its strict hierarchical structure – will it be possible to understand which criminal judicial qualification to ascribe to the individual at the rear by reference to the role of the front line individual (i.e. the one who issues an order vs the one who executes it). That is, of course, when we are faced with the practice of unlawful acts, keeping in mind the organizational framework and its influence over the will of the executor. One thing we take as read, if the orders can be described as unlawful, the boundary line of the duty of obedience, which cannot be overstepped, both because of a legal as well as a constitutional imperative, will have been crossed. And the military have sworn an oath of obedience to the fundamental law. The topic of hierarchical obedience cannot be separated from the analysis of current legislation which pertains to the topic within military institutions. With that in mind, it appeared relevant to address the major norms which regulate the matter within the Portuguese military legal system, and, whenever necessary and required by the reality under analysis, to relate that to civilian law or legal doctrine.

Distributed solar micro generation

Taking into account the fact that the sun’s radiation is estimated to be enough to cover 10.000 times the world’s total energy needs (BRAKMANN & ARINGHOFF, 2003), it is difficult to understand how solar photovoltaic systems (PV) are still such a small part of the energy source matrix across the globe. Though there is an ongoing debate as to whether energy consumption leads to economic growth or whether it is the other way around, the two variables appear correlated and it is clear that ensuring the availability of energy to match a country’s growth targets is one of the prime concerns for any government. The topic of centralized vs distributed electricity generation is also approached, especially in what regards the latter fit to developing countries needs, namely the lack of investment capabilities and infrastructure, scattered population, and other factors. Finally, Brazil’s case is reviewed, showing that the current cost of electricity from the grid versus the cost from PV solutions still places an investment of this nature with 9 to 16 years to reach breakeven (from a 25 year panel lifespan), which is too high compared to the required 4 years for most Brazilians. Still, recently passed legislation opened the door, even if unknowingly, to the development of co-owned solar farms, which could reduce the implementation costs by as much as 20% and hence reduce the number of years to breakeven by 3 years.

Ontology-based representation and generation of workflows for micro-task human-machine computation

Doctoral Program in Computer Science

Multifunctional converter to interface renewable energy sources and electric vehicles with the power grid in smart grids context

This paper proposes a multifunctional converter to interface renewable energy sources (e.g., solar photovoltaic panels) and electric vehicles (EVs) with the power grid in smart grids context. This multifunctional converter allows deliver energy from the solar photovoltaic panels to an EV or to the power grid, and exchange energy in bidirectional mode between the EV and the power grid. Using this multifunctional converter are not required multiple conversion stages, as occurs with the traditional solutions, where are necessary two power converters to integrate the solar photovoltaic system in the power grid and also two power converters to integrate an off-board EV battery charger in the power grid (dc-dc and dc-ac power converters in both cases). Taking into account that the energy provided (or delivered) from the power grid in each moment is function of the EV operation mode and also of the energy produced from the solar photovoltaic system, it is possible to define operation strategies and control algorithms in order to increase the energy efficiency of the global system and to improve the power quality of the electrical system. The proposed multifunctional converter allows the operation in four distinct cases: (a) Transfer of energy from the solar photovoltaic system to the power grid; (b) Transfer of energy from the solar photovoltaic system and from the EV to the power grid; (c) Transfer of energy from the solar photovoltaic system to the EV or to the power grid; (d) Transfer of energy between the EV and the power grid. Along the paper are described the system architecture and the control algorithms, and are also presented some computational simulation results for the four aforementioned cases. It is also presented a comparative analysis between the traditional and the proposed solution in terms of operation efficiency and estimated cost of implementation.

The impact of poor power quality in solar photovoltaic microgeneration: technical problems and losses of revenue

This paper presents a critical and quantitative analysis of the influence of the Power Quality in grid connected solar photovoltaic microgeneration installations. First are introduced the main regulations and legislation related with the solar photovoltaic microgeneration, in Portugal and Europe. Next are presented Power Quality monitoring results obtained from two residential solar photovoltaic installations located in the north of Portugal, and is explained how the Power Quality events affect the operation of these installations. Afterwards, it is described a methodology to estimate the energy production losses and the impact in the revenue caused by the abnormal operation of the electrical installation. This is done by comparing the amount of energy that was injected into the power grid with the theoretical value of energy that could be injected in normal conditions. The performed analysis shows that Power Quality severally affects the solar photovoltaic installations operation. The losses of revenue in the two monitored installations M1 and M2 are estimated in about 27% and 22%, respectively.

Three-phase current-source shunt active power filter with solar photovoltaic grid interface

This paper presents the proposal of a three phase current source shunt active power filter (CS-SAPF) with photovoltaic grid interface. The proposed system combines the compensation of reactive power and harmonics with the injection of energy from a solar photovoltaic array into the electrical power grid. The proposed equipment presents the advantage of giving good use to the current source inverter, even when the solar photovoltaic array is not producing energy. The paper describes the control system of the CS SAPF, the energy injection control strategy, and the current harmonics and power factor compensation strategy. Simulation results to assess the performance of the proposed system are also presented.

Using stated preference methods to assess environmental impacts of forest biomass power plants in Portugal

As a renewable energy source, the use of forest biomass for electricity generation is advantageous in comparison with fossil fuels, however the activity of forest biomass power plants causes adverse impacts, affecting particularly neighbouring communities. The main objective of this study is to estimate the effects of the activity of forest biomass power plants on the welfare of two groups of stakeholders, namely local residents and the general population and we apply two stated preference methods: contingent valuation and discrete choice experiments, respectively. The former method was applied to estimate the minimum compensation residents of neighbouring communities of two forest biomass power plants in Portugal would be willing to accept. The latter method was applied among the general population to estimate their willingness to pay to avoid specific environmental impacts. The results show that the presence of the selected facilities affects individuals’ well-being. On the other hand, in the discrete choice experiments conducted among the general population all impacts considered were significant determinants of respondents’ welfare levels. The results of this study stress the importance of performing an equity analysis of the welfare effects on different groups of stakeholders from the installation of forest biomass power plants, as their effects on welfare are location and impact specific. Policy makers should take into account the views of all stakeholders either directly or indirectly involved when deciding crucial issues regarding the sitting of new forest biomass power plants, in order to achieve an efficient and equitable outcome.

Annoyance and welfare costs from the presence of renewable energy power plants: an application of the contingent valuation method

Sustainability is frequently defined by its three pillars: economically viable, socially equitable, and environmentally bearable. Consequently the evaluation of the sustainability of any decision, public or private, requires information on these three dimensions. This paper focuses on social sustainability. In the context of renewable energy sources, the examination of social sustainability requires the analysis of not only the efficiency but also the equity of its welfare impacts. The present paper proposes and applies a methodology to generate the information necessary to do a proper welfare analysis of the social sustainability of renewable energy production facilities. This information is key both for an equity and an efficiency analysis. The analysis focuses on the case of investments in renewable energy electricity production facilities, where the impacts on local residents’ welfare are often significantly different than the welfare effects on the general population. We apply the contingent valuation method to selected facilities across the different renewable energy power plants located in Portugal and conclude that local residents acknowledge differently the damage sustained by the type, location and operation of the plants. The results from these case studies attest to the need of acknowledging and quantifying the negative impacts on local communities when assessing the economic viability, social equity and environmental impact of renewable energy projects.

Implementation and comparison of different switching techniques for shunt active power filters

This paper presents a comparison between three switching techniques that can be used in three-phase four-wire Shunt Active Power Filters (SAPFs). The implemented switching techniques are: Periodic-Sampling (PS), Triangular Carrier Pulse-Width Modulation (TC-PWM) and Space Vector PWM (SVPWM). The comparison between them is made in terms of the compensated currents THD%, implementation complexity, necessary CPU time and SAPF efficiency. To perform this comparison are presented and analyzed several experimental results, obtained with a 20 kVA Shunt Active Power Filter prototype, specially developed for this purpose. The control system of the developed SAPF is based in the p-q Theory with a grid synchronization algorithm p-PLL.

Quantificação de macro e micro nutrientes em algumas etnovariedades de cubiu (Solanum sessiliflorum Dunal)

Considerando a ampla variabilidade genética de cubiu (Solanum sessiliflorum Dunal), quantificaram-se os macro e micro-nutrientes, objetivando a ampliação da tabela de composição química de alimentos típicos da região amazônica. Os frutos provenientes da Estação Experimental de Hortaliças Alejo von der Pahlen (EEH) do Instituto Nacional de Pesquisas da Amazônia (INPA), localizados no km 14 da Rodovia AM 010 em Manaus, AM, foram processados no Laboratório de Alimentos e Nutrição do INPA. Avaliaram-se oito etnovariedades de cubiu identificados como: 2 I, 3 I, 6, 7, 12, 14, 17, 29 I e III em estádio de maturação comercial. Os teores de elementos minerais foram quantificados pela técnica de Ativação por Nêutrons Instrumental e a fibra alimentar pelo método enzímico-gravimétrico. Os resultados demonstram ser o cubiu um fruto com baixo conteúdo energético (média de 33 kcal), com conteúdo de fibra alimentar total na ordem de 1,6%. Em relação aos macros elementos minerais, a etnovariedade 6, apresentou a maior concentração em potássio (513,5±3,1mg), cálcio (18,9±0,6mg) e a etnovariedade 2 I em Fe (564,4±58,1µg) e Cr (99,3±8,3µg). A menor concentração foi constatada na etnovariedade 12 para os elementos K (229,0±4,5mg), Na (53,7±5,5µg) e Zn (89,3±4,7µg). Apesar das variações em relação as diferentes etno variedades e conseqüentemente concentrações em elementos minerais, o cubiu, pode estar contribuindo para atingir as recomendações desses nutrientes.

Energy harvesting performance of BaTiO3/poly(vinylidene fluoride-trifluoroethylene) spin coated nanocomposites

The energy harvesting efficiency of poly(vinylidene fluoride-trifluoroethylene) spin coated films and its nanocomposites with piezoelectric BaTiO3 have been investigated as a function of ceramic filler size and content. It is found that the best energy harvesting performance of ~0.28 W is obtained for the nanocomposite samples with 20% filler content of 10 nm size particles and for 5% filler content for the 100 and 500 nm size fillers. For the larger filler average sizes, the power decreases for filler contents above 5% due to increase of the mechanical stiffness of the samples. Due to the similar dielectric characteristics of the samples, the performance is mainly governed by the mechanical response. The obtained power values, easy processing and the low cost and robustness of the polymer, allow the implementation of the material for micro and nanogenerator applications.