Consideration of the efficacy of non-ionic vesicles in the targeted delivery of oral vaccines

The fundamentals of this research were to exploit non-ionic surfactant technology for delivery and administration of vaccine antigens across the oral route and to gain a better understanding of vaccine trafficking. Using a newly developed method for manufacture of non-ionic surfactant vesicles (niosomes and bilosomes) lower process temperatures were adopted thus reducing antigen exposure to potentially damaging conditions. Vesicles prepared by this method offered high protection to enzymatic degradation, with only ~10 % antigen loss measured when vesicles incorporating antigen were exposed to enzyme digestion. Interestingly, when formulated using this new production method, the addition of bile salt to the vesicles offered no advantage in terms of stability within simulated gastro-intestinal conditions. Considering their ability to deliver antigen to their target site, results demonstrated that incorporation of antigen within vesicles enhanced delivery and targeting of the antigen to the Peyer's Patch, again with niosomes and bilosomes offering similar efficiency. Delivery to both the Peyer's patches and mesentery lymphatics was shown to be dose dependent at lower concentrations, with saturation kinetics applying at higher concentrations. This demonstrates that in the formulation of vaccine delivery systems, the lipid/antigen dose ratio is not only a key factor in production cost, but is equally a key factor in the kinetics of delivery and targeting of a vaccine system. © 2013 Controlled Release Society.

Cellular uptake of ribonuclease A-functionalised core-shell silica microspheres

Analysis of protein function in a cellular context ideally requires physiologically representative levels of that protein. Thus conventional nucleic acid-based transfection methods are far from ideal owing to the over expression that generally results. Likewise fusions with protein transduction domains can be problematic whilst delivery via liposomes/nanoparticles typically results in endosomal localisation. Recently polymer microspheres have been reported to be highly effective at delivering proteins into cells and thus provide a viable new alternative for protein delivery (protein transduction). Herein we describe the successful delivery of active ribonuclease A into HeLa cells via novel polymer core-silica shell microspheres. Specifically, poly(styrene-co-vinylbenzylisothiouronium chloride) core particles, generated by dispersion polymerisation, were coated with a poly(styrene-co-trimethoxysilylpropyl methacrylate) shell. The resultant core-shell morphology was characterised by transmission electron, scanning electron and fluorescence confocal microscopies, whilst size and surface charge was assessed by dynamic light scattering and zeta-potential measurements, respectively. Subsequently ribonuclease A was coupled to the microspheres using simple carbodiimide chemistry. Gel electrophoresis confirmed and quantified the activity of the immobilised enzyme against purified HeLa RNA. Finally, the polymer-protein particles were evaluated as protein-transduction vectors in vitro to deliver active ribonuclease A to HeLa cells. Cellular uptake of the microspheres was successful and resulted in reduced levels of both intracellular RNA and cell viability.

Managing enterprise resource planning and multi-organisational enterprise governance:a new contingency framework for the enterprisation of operations

This research has been undertaken to determine how successful multi-organisational enterprise strategy is reliant on the correct type of Enterprise Resource Planning (ERP) information systems being used. However there appears to be a dearth of research as regards strategic alignment between ERP systems development and multi-organisational enterprise governance as guidelines and frameworks to assist practitioners in making decision for multi-organisational collaboration supported by different types of ERP systems are still missing from theoretical and empirical perspectives. This calls for this research which investigates ERP systems development and emerging practices in the management of multi-organisational enterprises (i.e. parts of companies working with parts of other companies to deliver complex product-service systems) and identify how different ERP systems fit into different multi-organisational enterprise structures, in order to achieve sustainable competitive success. An empirical inductive study was conducted using the Grounded Theory-based methodological approach based on successful manufacturing and service companies in the UK and China. This involved an initial pre-study literature review, data collection via 48 semi-structured interviews with 8 companies delivering complex products and services across organisational boundaries whilst adopting ERP systems to support their collaborative business strategies – 4 cases cover printing, semiconductor manufacturing, and parcel distribution industries in the UK and 4 cases cover crane manufacturing, concrete production, and banking industries in China in order to form a set of 29 tentative propositions that have been validated via a questionnaire receiving 116 responses from 16 companies. The research has resulted in the consolidation of the validated propositions into a novel concept referred to as the ‘Dynamic Enterprise Reference Grid for ERP’ (DERG-ERP) which draws from multiple theoretical perspectives. The core of the DERG-ERP concept is a contingency management framework which indicates that different multi-organisational enterprise paradigms and the supporting ERP information systems are not the result of different strategies, but are best considered part of a strategic continuum with the same overall business purpose of multi-organisational cooperation. At different times and circumstances in a partnership lifecycle firms may prefer particular multi-organisational enterprise structures and the use of different types of ERP systems to satisfy business requirements. Thus the DERG-ERP concept helps decision makers in selecting, managing and co-developing the most appropriate multi-organistional enterprise strategy and its corresponding ERP systems by drawing on core competence, expected competitiveness, and information systems strategic capabilities as the main contingency factors. Specifically, this research suggests that traditional ERP(I) systems are associated with Vertically Integrated Enterprise (VIE); whilst ERPIIsystems can be correlated to Extended Enterprise (EE) requirements and ERPIII systems can best support the operations of Virtual Enterprise (VE). The contribution of this thesis is threefold. Firstly, this work contributes to a gap in the extant literature about the best fit between ERP system types and multi-organisational enterprise structure types; and proposes a new contingency framework – the DERG-ERP, which can be used to explain how and why enterprise managers need to change and adapt their ERP information systems in response to changing business and operational requirements. Secondly, with respect to a priori theoretical models, the new DERG-ERP has furthered multi-organisational enterprise management thinking by incorporating information system strategy, rather than purely focusing on strategy, structural, and operational aspects of enterprise design and management. Simultaneously, the DERG-ERP makes theoretical contributions to the current IS Strategy Formulation Model which does not explicitly address multi-organisational enterprise governance. Thirdly, this research clarifies and emphasises the new concept and ideas of future ERP systems (referred to as ERPIII) that are inadequately covered in the extant literature. The novel DERG-ERP concept and its elements have also been applied to 8 empirical cases to serve as a practical guide for ERP vendors, information systems management, and operations managers hoping to grow and sustain their competitive advantage with respect to effective enterprise strategy, enterprise structures, and ERP systems use; referred to in this thesis as the “enterprisation of operations”.

Mobile Search and Advertising

Mobile advertising is a rapidly growing sector providing brands and marketing agencies the opportunity to connect with consumers beyond traditional and digital media and instead communicate directly on their mobile phones. Mobile advertising will be intrinsically linked with mobile search, which has transported from the internet to the mobile and is identified as an area of potential growth. The result of mobile searching show that as a general rule such search result exceed 160 characters; the dialog is required to deliver the relevant portion of a response to the mobile user. In this paper we focus initially on mobile search and mobile advert creation, and later the mechanism of interaction between the user’s request, the result of searching, advertising and dialog.

Online Education: What Works in Mathematics

Florida State University and University of Helsinki Information technology has the potential to deliver education to everybody by high quality online courses and associated services, and to enhance traditional face-to-face instruction by, e.g., web services offering virtually unlimited practice and step-bystep solutions to practice problems. Regardless of this, tools of information technology have not yet penetrated mathematics education in any meaningful way. This is mostly due to the inertia of academia: instructors are slow to change their working habits. This paper reports on an experiment where all the instructors (seven instructors and six teaching assistants) of a large calculus course were required to base their instruction on online content. The paper will analyze the effectiveness of various solutions used, and finishes with recommendations regarding best practices.

Bio-based chemicals from biorefining:carbohydrate conversion and utilisation

The quest for sustainable sources of fuels and chemicals to meet the demands of a rapidly rising global population represents one of this century's grand challenges. Biomass offers the most readily implemented, and low cost, solution for transportation fuels, and the only non-petroleum route to organic molecules for the manufacture of bulk, fine and speciality chemicals and polymers. Chemical processing of such biomass-derived building blocks requires catalysts compatible with hydrophilic, bulky substrates to facilitate the selective deoxygenation of highly functional bio-molecules to their target products. This chapter addresses the challenges associated with carbohydrate utilisation as a sustainable feedstock, highlighting innovations in catalyst and process design that are needed to deliver high-value chemicals from biomass-derived building blocks. © 2014 Woodhead Publishing Limited. All rights reserved.

Detecting EPCIS exceptions in linked traceability streams across supply chain business processes

The EPCIS specification provides an event oriented mechanism to record product movement information across stakeholders in supply chain business processes. Besides enabling the sharing of event-based traceability datasets, track and trace implementations must also be equipped with the capabilities to validate integrity constraints and detect runtime exceptions without compromising the time-to-deliver schedule of the shipping and receiving parties. In this paper we present a methodology for detecting exceptions arising during the processing of EPCIS event datasets. We propose an extension to the EEM ontology for modelling EPCIS exceptions and show how runtime exceptions can be detected and reported. We exemplify and evaluate our approach on an abstraction of pharmaceutical supply chains.

Guest editorial

Full text: With the rapid development of the aerospace industry, manufacturing technologies have to continuously develop and adjust themselves to ever-growing demands coming from more complex component designs and the use of highly engineered materials. Today there is an increased number of manufacturers contributing to the realization of final products, i.e. avionics, so it is easy to perceive the truly globalized dimension of the aerospace manufacturing business. With this comes the demand for further engineering developments on which the academic/industrial research institutes need to deliver solutions to real aerospace manufacturing problems. This is a challenging task since aerospace manufacturing technologies have to cover a wide range of materials (from composites to advanced Ni/Ti alloys), processes (from forging to non-traditional machining and assembly), and parts’ dimensions/batch sizes (from airframes to turbine blades). In this wide context, this Special Issue includes high quality theoretical and experimental scientific contributions on the following topics related to the aerospace manufacturing technology: (a) machining of advance aerospace alloys; (b) abrasive processes applied to aerospace components; (c) surface treatments to enhance fatigue performance of aerospace components; (d) joining and assembly of aerospace components; (e) laser machining of aerospace alloys; (f) automated/supervised manufacture of aerospace components; (g) quality supervision of aerospace manufacturing routes. The breadth of topics in this Special Issue is perhaps indicative of the complexity and challenges that the research related to aerospace manufacturing technology can offer. We hope that this issue will act as a catalyst for the development of further research, academic and industrial interactions, and publications related to aerospace manufacturing technologies for the benefit of the academic and industrial research communities.

Are school-of-thought words characterizable?

School of thought analysis is an important yet not-well-elaborated scientific knowledge discovery task. This paper makes the first attempt at this problem. We focus on one aspect of the problem: do characteristic school-of-thought words exist and whether they are characterizable? To answer these questions, we propose a probabilistic generative School-Of-Thought (SOT) model to simulate the scientific authoring process based on several assumptions. SOT defines a school of thought as a distribution of topics and assumes that authors determine the school of thought for each sentence before choosing words to deliver scientific ideas. SOT distinguishes between two types of school-of-thought words for either the general background of a school of thought or the original ideas each paper contributes to its school of thought. Narrative and quantitative experiments show positive and promising results to the questions raised above © 2013 Association for Computational Linguistics. © 2013 Association for Computational Linguistics.

Developing a serious game for PSS

Purpose: This paper presents the system architecture of a serious game, which is going to be run in parallel to Rolls Royce tra ining on product-service systems (PSS). Design/methodology/approach: The original game is outlined, requirements for an onl ine version are defined, and the architecture is proposed. Findings: The games approach has proven its value in design for service tra ining but an online version is needed to improve the opportunit ies to deliver the game. Originality/value: Such a system presents opportunities for the acquisition and development of specific professional knowledge, skills, and competencies

The Digital Observatory for Protected Areas (DOPA) as a support tool for protected area planning, financing and reporting

The Joint Research Centre (JRC) of the European Commission has developed, in consultation with many partners, the DOPA as a global reference information system to support decision making on protected areas (PAs) and biodiversity conservation. The DOPA brings together the World Database on Protected Areas with other reference datasets on species, habitats, ecoregions, threats and pressures, to deliver critical indicators at country level and PA level that can inform gap analyses, PA planning and reporting. These indicators are especially relevant to Aichi Targets 11 and 12, and have recently contributed to CBD country dossiers and capacity building on these targets. DOPA also includes eConservation, a new module that provides a means to share and search information on conservation projects, and thus allows users to see “who is doing what where”. So far over 5000 projects from the World Bank, GEF, CEPF, EU LIFE Programme, CBD LifeWeb Initiative and others have been included, and these projects can be searched in an interactive mapping interface based on criteria such as location, objectives, timeframe, budget, the organizations involved, target species etc. This seminar will provide an introduction to DOPA and eConservation, highlight how these services are used by the CBD and others, and include ample time for discussion.

Understanding innovation in outsourcing services

Recent years have witnessed an expansion in service industries such as finance, travel and retail. Firms in the services have shifted their traditional occupation with products to consider how value can be created and appropriated in the service industry [1]. In particular, information technology (IT) and IT-enabled business services have become central to a firm's ability to deliver value to its customers, driving firms to seek ways to improve their services and maintain their competitive position. In this regard, the last ten years have witnessed significant growth in the outsourcing industry which shifted from focus on low cost simple tasks such as coding to end-to-end delivery of services that range from IT services and customer services to more complex business services such as Finance and Accounting, Human Resources, Procurement, and knowledge-intensive services such as customer analysis and research services [2]. © 2012 Springer-Verlag.

How education should link with career paths

How good is your pharmacy practice? And what does “good” look like? Take a look back at the education and training you have received in your career to date. Has it stood you in good stead? Certainly there is a need to establish a model of professional education and development that produces good pharmacists — you should be able to demonstrate your competence regardless of your sector of work. It may help if we move away from the view that excellence in pharmacy practice is primarily defined by where you practise and the kind of job that you do. The Modernising Pharmacy Careers programme’s aspirations to integrate the undergraduate degree with the preregistration training year are bold and to be applauded — provided the outcome delivers changes that are more than superficial. The new model needs to deliver greater integration of education with practice, while retaining an adequate science base. Theory should be put into the context of practice-based, cross-sector learning needs and opportunities. For example, is the classroom really the best environment in which to learn dispensing? Pharmacokinetic theory could be put into context through creatively designed work placements. And it might make more sense to learn patient counselling in a community pharmacy, and so on. Is it resources we lack to make this happen? Or do we lack the collective will to be imaginative, to be radical and to conceive new approaches to professional education? Implicit in this new approach to education is the expectation that pharmacists should teach and mentor and, conversely, that those who teach should also engage in relevant practice. University education must produce graduates whose knowledge and competence are useful to employers. Moreover, graduates must be adequately prepared to enter any area of the profession endowed with professional self-confidence (something, arguably, that needs further development within the pharmacy psyche). Of course, becoming qualified is just the beginning. Post-qualification, pharmacists need structured career paths that foster this professional confidence, support learning and ensure recognition. To this end, the Royal Pharmaceutical Society-led professional curriculum group is working to define knowledge, skills and experience for all areas of advanced practice. More than ever, the profession needs to adopt a culture of learning, teaching and practice research that is unified. The question is: how do we move away from merely collecting qualifications (trophies) to developing meaningful careers? Pharmacists in all areas and at all levels of the profession need to consider their own willingness to make this shift. The RPS and MPC are leading the way, but are we following?

Supporting learners’ agentic engagement with feedback:a systematic review and a taxonomy of recipience processes

Much has been written in the educational psychology literature about effective feedback and how to deliver it. However, it is equally important to understand how learners actively receive, engage with, and implement feedback. This article reports a systematic review of the research evidence pertaining to this issue. Through an analysis of 195 outputs published between 1985 and early 2014, we identified various factors that have been proposed to influence the likelihood of feedback being used. Furthermore, we identified diverse interventions with the common aim of supporting and promoting learners' agentic engagement with feedback processes. We outline the various components used in these interventions, and the reports of their successes and limitations. Moreover we propose a novel taxonomy of four recipience processes targeted by these interventions. This review and taxonomy provide a theoretical basis for conceptualizing learners' responsibility within feedback dialogues and for guiding the strategic design and evaluation of interventions. Receiving feedback on one's skills and understanding is an invaluable part of the learning process, benefiting learners far more than does simply receiving praise or punishment (Black & Wiliam, 1998 Black, P., & Wiliam, D. (1998). Assessment and classroom learning. Assessment in Education: Principles, Policy & Practice, 5, 7–74. doi:10.1080/0969595980050102[Taylor & Francis Online]; Hattie & Timperley, 2007 Hattie, J., & Timperley, H. (2007). The power of feedback. Review of Educational Research, 77, 81–112. doi:10.3102/003465430298487[CrossRef], [Web of Science ®]). Inevitably, the benefits of receiving feedback are not uniform across all circumstances, and so it is imperative to understand how these gains can be maximized. There is increasing consensus that a critical determinant of feedback effectiveness is the quality of learners' engagement with, and use of, the feedback they receive. However, studies investigating this engagement are underrepresented in academic research (Bounds et al., 2013 Bounds, R., Bush, C., Aghera, A., Rodriguez, N., Stansfield, R. B., & Santeen, S. A. (2013). Emergency medicine residents' self-assessments play a critical role when receiving feedback. Academic Emergency Medicine, 20, 1055–1061. doi:10.1111/acem.12231[CrossRef], [PubMed], [Web of Science ®]), which leaves a “blind spot” in our understanding (Burke, 2009 Burke, D. (2009). Strategies for using feedback students bring to higher education. Assessment & Evaluation in Higher Education, 34, 41–50. doi:10.1080/02602930801895711[Taylor & Francis Online], [Web of Science ®]). With this blind spot in mind, the present work sets out to systematically map the research literature concerning learners' proactive recipience of feedback. We use the term “proactive recipience” here to connote a state or activity of engaging actively with feedback processes, thus emphasizing the fundamental contribution and responsibility of the learner (Winstone, Nash, Rowntree, & Parker, in press Winstone, N. E., Nash, R. A., Rowntree, J., & Parker, M. (in press). ‘It'd be useful, but I wouldn't use it’: Barriers to university students' feedback seeking and recipience. Studies in Higher Education. doi: 10.1080/03075079.2015.1130032[Taylor & Francis Online]). In other words, just as Reeve and Tseng (2011 Reeve, J., & Tseng, M. (2011). Agency as a fourth aspect of student engagement during learning activities. Contemporary Educational Psychology, 36, 257–267. doi:10.1016/j.cedpsych.2011.05.002[CrossRef], [Web of Science ®]) defined “agentic engagement” as a “student's constructive contribution into the flow of the instruction they receive” (p. 258), likewise proactive recipience is a form of agentic engagement that involves the learner sharing responsibility for making feedback processes effective.

CO2 absorption into aqueous amine blended solutions containing monoethanolamine (MEA), N,N-dimethylethanolamine (DMEA), N,N-diethylethanolamine (DEEA) and 2-amino-2-methyl-1-propanol (AMP) for post-combustion capture processes

Presently monoethanolamine (MEA) remains the industrial standard solvent for CO2 capture processes. Operating issues relating to corrosion and degradation of MEA at high temperatures and concentrations, and in the presence of oxygen, in a traditional PCC process, have introduced the requisite for higher quality and costly stainless steels in the construction of capture equipment and the use of oxygen scavengers and corrosion inhibitors. While capture processes employing MEA have improved significantly in recent times there is a continued attraction towards alternative solvents systems which offer even more improvements. This movement includes aqueous amine blends which are gaining momentum as new generation solvents for CO2 capture processes. Given the exhaustive array of amines available to date endless opportunities exist to tune and tailor a solvent to deliver specific performance and physical properties in line with a desired capture process. The current work is focussed on the rationalisation of CO2 absorption behaviour in a series of aqueous amine blends incorporating monoethanolamine, N,N-dimethylethanolamine (DMEA), N,N-diethylethanolamine (DEEA) and 2-amino-2-methyl-1-propanol (AMP) as solvent components. Mass transfer/kinetic measurements have been performed using a wetted wall column (WWC) contactor at 40°C for a series of blends in which the blend properties including amine concentration, blend ratio, and CO2 loadings from 0.0-0.4 (moles CO2/total moles amine) were systematically varied and assessed. Equilibrium CO2 solubility in each of the blends has been estimated using a software tool developed in Matlab for the prediction of vapour liquid equilibrium using a combination of the known chemical equilibrium reactions and constants for the individual amine components which have been combined into a blend.From the CO2 mass transfer data the largest absorption rates were observed in blends containing 3M MEA/3M Am2 while the selection of the Am2 component had only a marginal impact on mass transfer rates. Overall, CO2 mass transfer in the fastest blends containing 3M MEA/3M Am2 was found to be only slightly lower than a 5M MEA solution at similar temperatures and CO2 loadings. In terms of equilibrium behaviour a slight decrease in the absorption capacity (moles CO2/mole amine) with increasing Am2 concentration in the blends with MEA was observed while cyclic capacity followed the opposite trend. Significant increases in cyclic capacity (26-111%) were observed in all blends when compared to MEA solutions at similar temperatures and total amine concentrations. In view of the reasonable compromise between CO2 absorption rate and capacity a blend containing 3M MEA and 3M AMP as blend components would represent a reasonable alternative in replacement of 5M MEA as a standalone solvent.