Una prueba de la técnica multi-espécimen para determinar paleointensidad utilizando material arqueomagnetico: resultados preliminares con arcillas quemadas Tunecinas

The multispecimen palaeointensity technique of Dekkers & Böhnel (2006) has been tested on archaeomagnetic material from five kilns from Tunisia. In a previous study all five kilns yielded good quality archaeointensities based on Thellier-type double heating experiments. Results obtained using the multispecimen technique compared well with the previously studied Thellier-type results, with a slight tendency towards lower values. Markedly lower values were observed in two kilns, results that were improved by increasing the proportion of the natural remanence remagnetised in the partial thermoremanence acquisition. One of the kilns showed a multicomponent remanence (due to partial heating) and gave relatively poor results.

La Mancha Triassic and Lower Lias Stratigraphy, a well log interpretation

La estratigrafía del intervalo sedimentario correspondiente al Keuper, Triásico, y al Lías basal ha atraído históricamente mucho menos interés que los sedimentos adyacentes del Muschelkalk y Buntsandstein, y del Lías Inferior y Medio. Se ha confeccionado una correlación de 12 sondeos profundos del área de La Mancha para mostrar la distribución de facies de estas formaciones, así como su ordenación en secuencias sedimentarias. Los datos de pozo muestran la existencia de secuencias evaporíticas complejas y multiepisódicas en la unidad inferior K1, de carácter más salino, y en la unidad superior K4-K5, relativamente más anhidrítica. El episodio clástico correspondiente a las unidades K2-K3 está extendido en toda la zona, con varias áreas preferenciales de acumulación de arenas. La unidad K6, la más alta del Keuper, constituye un excelente nivel guía. La sedimentación continúa en el Lías basal con otra potente unidad evaporítica, la Zona de Anhidrita, que muestra un episodio salino muy signifi cativo en la parte central de la correlación. Es de resaltar la buena correlación que existe entre los afl oramientos y las sondeos para estas formaciones.

Análisis multivariable de la vegetación de un complejo de turberas en Cordillera Pelada (Valdivia,Chile)

Se estudió la vegetación en un gradiente de inclinación de un complejo de turberas, en la cordillera costera de Valdivia, Chile. Se levantaron 17 censos de vegetación, ubicados equidistantes en un transecto de 50 m. La tabla fitosociológica resultante se analizó con métodos estadísticos multivariables de ordenación y de clasificación. Además, se determinaron algunas características químicas del sustrato. El transecto estudiado corresponde a una coenoclina, cuya parte alta es ocupada por un alerzal (Fitzroyeturn cupressoidis), en la zona intermedia se desarrolla una turbera ombrogénica de Donatia fascicularis (Drosero-Donatieturn fascicularis) y, en la parte inferior, una topogénica de Sphagnum magellanicum (Sphagnetum magellanicii). En las zonas ecotonales entre estas comunidades prosperan pantanos turbosos de Astelia pumila (Astelio-Oreoboletum obtusangulae) y de Marsippospermum philippii (Marsippospormo-Astelietum pumiliae) que muestran escasa diferenciación florística. Se proponen dos alianzas fitosociológicas nuevas Donation fascicularis (turberas de Donatia) y Astelion pumilae (pantanos de Astelia) para la clase Myrteolo-Sphagnetea Oberdorfer 1960. Los contenidos de materia orgánica y de agua del sustrato son los factores determinantes de estos patrones de distribución. Finalmente, se analiza la posición fitogeográfica de las comunidades vegetales determinadas.

La vegetación rupícola del Moncayo silíceo. Una aproximación basada en un Análisis Canónico de Correspondencias

Se ha realizado un estudio florístico y ecológico de las comunidades rupícolas dcl Moncayo silíceo. Para ello se han inventariado sistemáticamente parcelas de vegetación, con una clara definición geomorfológica y se han considerado una serie de variables ambientales que podían tener importancia en la delimitación de los microhábitats (altitud, desarrollo edáfico, superficie, inclinación, zona de la pared, orientación, etc.), Los datos han sido tratados mediante diferentes técnicas de ordenación, tanto de gradiente indirecto (CM) como de gradiente directo (CCA) con el fin de desvelar su estructura interna, desde el punto de vista florístico, filosociológico y ecologico, y se ha propuesto un modelo de explotación ecológica y espacial de los medios rupícolas silíceos del macizo del Moncayo. Las comunidades reconocidas han sido ocho: Comunidades humícolas y esciófilas de base de cantil y grandes grietas del horizonte oromediterráneo inferior. Comunidades graminoides culminícolas y psicroxerófilas de las zonas más elevadas del macizo. Comunidades casmofíticas de los pisos supra- y oromediterráneo inferior. Comunidades comofíticas dominadas por crasuláceas de las repisas o zonas de baja inclinación. Comunidades casmofiticas de carácter transicional. Comunidades humícolas y esciófilas de base de cantil y grandes grietas en las zonas elevadas del macizo. Comunidades casmofíticas de las zonas elevadas del macizo. Comunidades nanofanerofíticas de grandes repisas y zonas cacuminales.

Lecanora rhizinata spec. nova, liquen taxonómicamente aislado, sobre fisuras de rocas exfoliables, en España

Se describe una nueva especie de Lecanora Ach. (L. rhizinata Poetl., Barreno & Rico) de la alta montaña del Centro de España, que se desarrolla sobre rocas metamórficas fácilmente exfoliables. La especie puede encuadrarse dentro de la subsección Concolores Poelt (sect. Petrasterion Poelt, subgen. Placodium (Pers.) Poelt) del género Lecanora. Sin embargo, la compleja estructura anatómica del talo, en la que se diferencian fascículos de hifas fuertemente conglutinadas, que partiendo del córtex penetran hacia la médula llegando, en ocasiones, hasta el límite inferior de la escuámula e intercalándose con la capa gonidial a la que disgregan en glomérulos, unido a la presencia de cordones rizinales («Rhizinenstränge»), hacen que la nueva especie tenga una posición aislada dentro del grupo Concolores y pudiera reclamar un estatus distinto. Asimismo se hace una comparación con otras especies de la citada subsect. Concolores y con otros géneros de Lecanoraceae.

Estucoqueratosis. A propósito de un caso

La estucoqueratosis es una patología dérmica que cursa con tumoraciones queratósicas asintomáticas, benignas, blanco-grisáceas y de pequeño tamaño. Éstas suelen localizarse en las extremidades (especialmente en las inferiores) en torno al tobillo. Su etiología es desconocida y su diagnóstico se realiza mediante una correcta anamnesis y exploración física ya que la morfología, localización y edad de presentación son claves para poder establecer un diagnóstico diferencial con otras afecciones aunque en caso necesario también se puede recurrir a la biopsia. Constituye una entidad clínica con especial interés podológico dada su frecuente aparición en las extremidades inferiores, de ahí la necesidad de conocerla y de saber realizar un correcto diagnóstico diferencial. Presentamos el caso de un varón de 45 años sin antecedentes dermatológicos que presenta estucoqueratosis en la extremidad inferior y que acude al Servicio de Dermatología del Hospital Naval de Ferrol.

Variaciones termométricas en la planta del pie y piernas valorada en corredores antes y después de correr 30 km

La termometría es una técnica no invasiva que permite cuantificar los cambios en la temperatura cutánea y evaluarla de forma cuantitativa. El aumento significativo de la temperatura puede indicar la existencia de patología. Se ha demostrado que la actividad muscular induce procesos de transferencia de calor entre los músculos y las capas superficiales de tejido. En este estudio queremos cuantificar los cambios de temperatura que se producen en los músculos del pie y miembro inferior tras una carrera de 30 km, para ello hemos utilizado una cámara termográfica de alta resolución. Contamos con la colaboración voluntaria de 32 sujetos sanos a los que procedimos a tomar fotografías de la planta del pie, parte anterior de la pierna, parte posterior de la pierna, parte anterior del muslo y parte posterior del muslo en dos etapas, primero antes de la carrera y segunda toma después de la carrera de 30 km, de esta manera pudimos valorar si había o no variación de temperatura en las zonas seleccionadas. Tras el análisis de los datos obtenidos encontramos significativas variaciones térmicas en Talón, cabeza primer metatarsiano, cabeza segundo metatarsiano, cabeza tercer metatarsiano, cabeza cuarto metatarsiano, cabeza quinto metatarsiano, apófisis estiloides quinto metatarsiano, arco longitudinal interno, maléolo interno, maléolo externo, peroneo lateral largo, vasto interno, vasto externo, recto femoral, tensor de la fascia lata, inserción cuádriceps, gemelo interno, tendón de Aquiles y Biceps femoral.

Una revisión de la Cadena Datos-Información-Conocimiento desde el Pragmatismo de Peirce

La Cadena Datos-Información-Conocimiento (DIC), denominada “Jerarquía de la Información” o “Pirámide del Conocimiento”, es uno de los modelos más importantes en la Gestión de la Información y la Gestión del Conocimiento. Por lo general, la estructuración de la cadena se ha ido definiendo como una arquitectura en la que cada elemento se levanta sobre el elemento inmediatamente inferior; sin embargo no existe un consenso en la definición de los elementos, ni acerca de los procesos que transforman un elemento de un nivel a uno del siguiente nivel. En este artículo se realiza una revisión de la Cadena Datos-Información-Conocimiento examinando las definiciones más relevantes sobre sus elementos y sobre su articulación en la literatura, para sintetizar las acepciones más comunes. Se analizan los elementos de la Cadena DIC desde la semiótica de Peirce; enfoque que nos permite aclarar los significados e identificar las diferencias, las relaciones y los roles que desempeñan en la cadena desde el punto de vista del pragmatismo. Finalmente se propone una definición de la Cadena DIC apoyada en las categorías triádicas de signos y la semiosis ilimitada de Peirce, los niveles de sistemas de signos de Stamper y las metáforas de Zeleny.

BARRIERS AND SOLUTIONS TO OPEN SOURCE APPROPRIATE TECHNOLOGY FOR SUSTAINABLE DEVELOPMENT: INNOVATION THROUGH COLLABORATION

It has been proposed that the field of appropriate technology (AT) - small-scale, energy efficient and low-cost solutions, can be of tremendous assistance in many of the sustainable development challenges, such as food and water security, health, shelter, education and work opportunities. Unfortunately, there has not yet been a significant uptake of AT by organizations, researchers, policy makers or the mainstream public working in the many areas of the development sector. Some of the biggest barriers to higher AT engagement include: 1) AT perceived as inferior or ‘poor persons technology’, 2) questions of technological robustness, design, fit and transferability, 3) funding, 4) institutional support, as well as 5) general barriers associated with tackling rural poverty. With the rise of information and communication technologies (ICTs) for online networking and knowledge sharing, the possibilities to tap into the collaborative open-access and open-source AT are growing, and so is the prospect for collective poverty reducing strategies, enhancement of entrepreneurship, communications, education and a diffusion of life-changing technologies. In short, the same collaborative philosophy employed in the success of open source software can be applied to hardware design of technologies to improve sustainable development efforts worldwide. To analyze current barriers to open source appropriate technology (OSAT) and explore opportunities to overcome such obstacles, a series of interviews with researchers and organizations working in the field of AT were conducted. The results of the interviews confirmed the majority of literature identified barriers, but also revealed that the most pressing problem for organizations and researchers currently working in the field of AT is the need for much better communication and collaboration to share the knowledge and resources and work in partnership. In addition, interviews showcased general receptiveness to the principles of collaborative innovation and open source on the ground level. A much greater focus on networking, collaboration, demand-led innovation, community participation, and the inclusion of educational institutions through student involvement can be of significant help to build the necessary knowledge base, networks and the critical mass exposure for the growth of appropriate technology.

What motion distributions yield global transparency and spatial segmentation?

We have examined the ability of observers to parse bimodal local-motion distributions into two global motion surfaces, either overlapping (yielding transparent motion) or spatially segregated (yielding a motion boundary). The stimuli were random dot kinematograms in which the direction of motion of each dot was drawn from one of two rectangular probability distributions. A wide range of direction distribution widths and separations was tested. The ability to discriminate the direction of motion of one of the two motion surfaces from the direction of a comparison stimulus was used as an objective test of the perception of two discrete surfaces. Performance for both transparent and spatially segregated motion was remarkably good, being only slightly inferior to that achieved with a single global motion surface. Performance was consistently better for segregated motion than for transparency. Whereas transparent motion was only perceived with direction distributions which were separated by a significant gap, segregated motion could be seen with abutting or even partially overlapping direction distributions. For transparency, the critical gap increased with the range of directions in the distribution. This result does not support models in which transparency depends on detection of a minimum size of gap defining a bimodal direction distribution. We suggest, instead, that the operations which detect bimodality are scaled (in the direction domain) with the overall range of distributions. This yields a flexible, adaptive system that determines whether a gap in the direction distribution serves as a segmentation cue or is smoothed as part of a unitary computation of global motion.

Exploring grain size as a cause for dead-layer effects in thin film capacitors

Pulsed laser deposition was used to make a series of Au/Ba0.5Sr0.5TiO3 (BST)/SrRuO3/MgO thin film capacitors with dielectric thickness ranging from similar to15 nm to similar to1 mum. Surface grain size of the dielectric was monitored as a function of thickness using both atomic force microscopy and transmission electron microscopy. Grain size data were considered in conjunction with low field dielectric constant measurements. It was observed that the grain size decreased with decreasing thickness in a manner similar to the dielectric constant. Simple models were developed in which a functionally inferior layer at the grain boundary was considered as responsible for the observed dielectric behavior. If a purely columnar microstructure was assumed, then constant thickness grain-boundary dead layers could indeed reproduce the series capacitor dielectric response observed, even though such layers would contribute electrically in parallel with unaffected bulk- like BST. Best fits indicated that the dead layers would have a relative dielectric constant similar to40, and thickness of the order of tens of nanometers. For microstructures that were not purely columnar, models did not reproduce the observed dielectric behavior well. However, cross-sectional transmission electron microscopy indicated columnar microstructure, suggesting that grain boundary dead layers should be considered seriously in the overall dead-layer debate. (C) 2002 American Institute of Physics.

Distribution-based adaptive bounding genetic algorithm for continuous optimisation problems

A new search-space-updating technique for genetic algorithms is proposed for continuous optimisation problems. Other than gradually reducing the search space during the evolution process with a fixed reduction rate set ‘a priori’, the upper and the lower boundaries for each variable in the objective function are dynamically adjusted based on its distribution statistics. To test the effectiveness, the technique is applied to a number of benchmark optimisation problems in comparison with three other techniques, namely the genetic algorithms with parameter space size adjustment (GAPSSA) technique [A.B. Djurišic, Elite genetic algorithms with adaptive mutations for solving continuous optimization problems – application to modeling of the optical constants of solids, Optics Communications 151 (1998) 147–159], successive zooming genetic algorithm (SZGA) [Y. Kwon, S. Kwon, S. Jin, J. Kim, Convergence enhanced genetic algorithm with successive zooming method for solving continuous optimization problems, Computers and Structures 81 (2003) 1715–1725] and a simple GA. The tests show that for well-posed problems, existing search space updating techniques perform well in terms of convergence speed and solution precision however, for some ill-posed problems these techniques are statistically inferior to a simple GA. All the tests show that the proposed new search space update technique is statistically superior to its counterparts.

Toward Self-Assembled Ferroelectric Random Access Memories: Hard-Wired Switching Capacitor Arrays with Almost Tb/in.2 Densities

We report on the successful fabrication of arrays of switchable nanocapacitors made by harnessing the self-assembly of materials. The structures are composed of arrays of 20-40 nm diameter Pt nanowires, spaced 50-100 nm apart, electrodeposited through nanoporous alumina onto a thin film lower electrode on a silicon wafer. A thin film ferroelectric (both barium titanate (BTO) and lead zirconium titanate (PZT)) has been deposited on top of the nanowire array, followed by the deposition of thin film upper electrodes. The PZT nanocapacitors exhibit hysteresis loops with substantial remnant polarizations, while although the switching performance was inferior, the low-field characteristics of the BTO nanocapacitors show dielectric behavior comparable to conventional thin film heterostructures. While registration is not sufficient for commercial RAM production, this is nevertheless an embryonic form of the highest density hard-wired FRAM capacitor array reported to date and compares favorably with atomic force microscopy read-write densities.

Applying a QSPR correlation to the prediction of surface tensions of ionic liquids

Ionic liquids (ILs) have attracted large amount of interest due to their unique properties. Although large effort has been focused on the investigation of their potential application, characterization of ILs properties and structure–property relationships of ILs are poorly understood. Computer aided molecular design (CAMD) of ionic liquids (ILs) can only be carried if predictive computational methods for the ILs properties are available. The limited availability of experimental data and their quality have been preventing the development of such tools. Based on experimental surface tension data collected from the literature and measured at our laboratory, it is here shown how a quantitative structure–property relationship (QSPR) correlation for parachors can be used along with an estimation method for the densities to predict the surface tensions of ILs. It is shown that a good agreement with literature data is obtained. For circa 40 ionic liquids studied a mean percent deviation (MPD) of 5.75% with a maximum deviation inferior to 16% was observed. A correlation of the surface tensions with the molecular volumes of the ILs was developed for estimation of the surface tensions at room temperature. It is shown that it can describe the experimental data available within a 4.5% deviation. The correlations here developed can thus be used to evaluate the surface tension of ILs for use in process design or in the CAMD of new ionic liquids.

Estimation of speed of sound of ionic liquids using surface tensions and densities: A volume based approach

The limited availability of experimental data and their quality have been preventing the development of predictive methods and Computer Aided Molecular Design (CAMD) of ionic liquids (ILs). Based on experimental speed of sound data collected from the literature, the inter-relationship of surface tension (s), density (?), and speed of sound (u) has been examined for imidazolium based ILs containing hexafluorophosphate (PF6), tetrafluoroborate (BF4), bis(trifluoromethanesulphonyl) amide (NTf2), methyl sulphate (MeSO4), ethyl sulphate (EtSO4), and trifluoromethanesulphonate (CF3SO3) anions, covering wide ranges of temperature, 278.15–343.15 K and speed of sound, 1129.0–1851.0 m s-1. The speed of sound was correlated with a modified Auerbach's relation, by using surface tension and density data obtained from volume based predictive methods previously proposed by the authors. It is shown that a good agreement with literature data is obtained. For 133 data points of 14 ILs studied a mean percent deviation (MPD) of 1.96% with a maximum deviation inferior to 5% was observed. The correlations developed here can thus be used to evaluate the speeds of sound of new ionic liquids.