Chemiluminescent determination of luminol and hydrogen peroxide using hematin immobilized in the bulk of a carbon paste electrode

A new method for immobilization of a chemiluminescent reagent is presented. It is based on immobilizing hematin, a catalyst for luminol reaction, in the bulk of a carbon paste electrode. Bulk-immobilization allows renewal of the surface by simple polishing or cutting to expose anew and fully active surface in the case of fouling or deactivation by other means. By using a hematin-modified carbon paste electrode, the applied potential shifted negatively compared with that of unmodified carbon paste electrode or a glassy carbon electrode. The shift in potential changed the reaction processes and effectively stabilized the chemiluminescent signal during successive measurements. Under this condition, the signal was stable during 3 hours of continuous operation. The log-log plots of the emitted light intensity vs. luminol concentration and hydrogen peroxide concentration were linear over the region 10(-8)-10(-3) mol L-1 with a correlation coefficient of 0.999 and 3.9 x 10(-6)-10(-3) mol L-1 with a correlation coefficient of 0.994, respectively. Application of this method for other chemiluminescent and bioluminescent systems is suggested.

Chemiluminescent determination of glucose with a modified carbon paste electrode

A flow injection analysis detection method for glucose is presented which is based on the oxidation of glucose by glucose oxidase followed by chemiluminescent detection of hydrogen peroxide. Both glucose oxidase and hematin, a chemiluminescent reaction catalyst, were bulk-immobilized conveniently by direct mixing with carbon paste, which allows renewal of the electrode surface by simply polishing or cutting to expose a new and fully active surface in the case of fouling. Luminol in reagent solution passed through the flow cell and reacted with hydrogen peroxide produced by the enzyme reactor in the presence of the catalyst to yield light. An applied potential of -0.4 V avoided the electrode fouling effectively. The log-log plot of the emitted light intensity vs glucose concentration was linear over the range of 1-100 mmol L-1 with a correlation coefficient of 0.992. Application of this method to other chemiluminescent and bioluminescent systems is suggested. (C) 1999 Academic Press.

Translocation of assimilates in Undaria and its cultivation in China

Undaria cultivation on a commercial scale began in China only in the last decade. Today, Undaria pinnatifida is the main species under cultivation concentrated in two provinces, Liaoning and Shandong. The annual production in the early nineties was 8000-13 000 tons dry weight, which is two or three times the pre-1980 figures. The raft cultivation method maintaining the alga at the desired depths generally ensures the light saturated rate of photosynthesis on clear days, and enhances production. Under the cultivated condition, the calculated annual primary productivity of this alga is 160 g C m(-2) y(-1). Translocation of C-14-labelled photoassimilates in rapidly growing sporophyte of Undaria pinnatifida was studied in the open sea. Samples from different parts of the blade with counterparts exposed to tracer ((NaHCO3)-C-14) showed that the translocation that occurred mainly from the tip of the blade to the growing region had obvious source-sink relationship. It took 20 minutes to translocate the labelled photoassimilates from the epidermis, via cortex, to the medulla of the midrib, where rates of translocation averaging 42-48 cm h(-1) were observed in the open sea. Production experiments of tip-cutting of the blades showed an increased production of 9%.

基于原子力显微镜的阳极氧化技术及其在碳纳米管氧化切割与焊接中的应用

探针阳极氧化是构建纳米结构,制造纳米器件的重要技术之一,本文对该技术中基于原子力显微镜(AFM)的阳极氧化进行了新的研究.通过对氧化加工中微观电场在基底表面分布情况进行模拟,分析了氧化结构的特征与电场分布的关系,通过实验研究分析了不同加工因素对氧化加工的影响.在这些研究基础上利用AFM阳极氧化技术实现了对碳纳米管(CNT)的氧化切割及焊接,为CNT基纳米器件的装配及制备提供了新的技术途径。

高密度聚乙烯塑料压力管道热板焊接头应力分布有限元分析

基于热粘弹性积分型本构关系,考虑材料性能依赖于温度变化及相变潜热的影响,利用AN SYS热-力耦合及载荷步功能模拟结晶型高密度聚乙烯(HDPE)塑料压力管道热板焊接过程,并对焊接接头的应力分布进行有限元分析,得到了环向、轴向以及径向瞬态应力分布的基本规律。采用盲孔法和锯切法测量焊后残余应力,实测结果与数值分析基本符合

几种螺旋面钻尖刃磨机床的研制

介绍了几种自行研制开发的螺旋面钻尖刃磨机床。这些刃磨机结构简单 ,成本低 ,操作容易。在这些刃磨机上所刃磨出的螺旋面钻尖与普通钻头钻尖相比可实现自动定心功能 ,且钻削轴向力小。

基于模型扰动抑制的直线伺服系统设计

针对高精度、微进给永磁直线交流同步电机 (PMLSM )驱动系统 ,采用基于模型的扰动抑制 (MBDA)方法 ,对诸如摩擦力、切削力、负载变动之类的扰动进行抑制。MBDA是利用一个与系统并行的标称模型 ,通过输出反馈 ,将系统输出与标称模型输出进行比较 ,得出误差信号 ,并通过设计一个补偿器将误差信号反馈给被控对象的输入端 ,从而实现扰动抑制。同时 ,针对速度环设计了积分 -比例 (IP)控制器 ,以满足系统快速跟踪指令的要求 ,并且其具有较强的抗扰动能力。仿真结果表明 ,该控制方法响应速度快 ,抗干扰能力强

一种并联机床运动平台位姿测量方法

提出一种采用附加测量机构直接测量并联机床运动平台位姿精度的方法。其基本思想是根据运动平台的运动特性在固定平台和运动平台之间增设附加测量机构，当运动平台运动时带动测量机构运动，通过安装在测量机构上的传感器测得广义坐标参量， 经运动学建模即可得到运动平台的位姿。当测量机构位姿正解求解速度满足实时控制要求时，利用该反馈信息对机床进行实时精度补偿和控制。基于上述思想建立的并联机床位姿测量系统可部分排除机床切削力变形和运动副间隙等误差， 从而提高机床的位姿测量精度。以一种五坐标并联机床为例，介绍采用附加测量机构直接测量运动平台位姿精度的建模方法。其中， 测量机构的综合十分重要。测量机构的组成决定了运动学模型的复杂程度， 即决定了运动学模型的计算效率。

数控自动编程专家系统

本文简要地介绍了数控自动编程专家系统.其中包括:专家系统知识表示的形式;分层次的黑板结构;前向推理求解策略和相应的解释功能;系统针对不同类型的曲线组合,采用不同的独立的知识源(KS)进行处理.由于在知识的处理上采用编码技术,在前向推理求解策略中使用启发信息和“剪技”技术,提高了系统的时空效率.系统中的规划程序能自动规划切削路径.输出供数控车床使用的 NC 代码,并可在显示屏上进行图形显示和切削仿真.目前原型系统已经在 IBM-PC 和 Sun3/60计算机上利用FORTRAN 语言实现.

新型托辊切管机控制系统设计

文章介绍了一种新型托辊切管机控制系统的设计,对该系统的硬件组态及控制功能作了主要描述。该机床是托辊自动化加工装配线上的一台机电一体化自动加工设备,其主要功能是对托辊装配所需原料管进行定尺切断,并在整个加工过程中自动上下料。整个机床控制系统主要由SIEMENS Simotion D运动控制系统、触摸屏TP177B、远程输入输出模块ET200M等组成。

东北亚构造-盆地演化及油气资源控制作用

The oil and gas potential of Northeast Asia is enormous, but the degree of exploration is very low in Northeast Asia (the degree is below 3%-10%).The reasons are as follows: First, it is relatively difficult to study the oil and gas bearing basins(OGB), which are of multiple types, in different tectonic settings, with complex geologic frameworks and with long-term geologic evolution. Secondly, because of the non-equilibrium in development of economy and regional market, application of theories and techniques and the research levels in different countries, the conclusions are not conformable, and even contradictory. Thirdly, most of the former researches were limited to one territory or one basin, and lack of systematical and in-depth study on geotectonic evolution, classification of basins, and the evaluation of hydrocarbon resources. In this thesis, integrated study of the regional tectonic feature and basin features of Northeast Asia was done, to understand the basin evolution history and the controlling action on oil and gas. Then, new conclusions are and exploration proposals are as following: 1. Geotectonic evolution in Northeast Asia: The main structural motion system in Paleozoic Era was longitudinal, and in Meso-cenozoic was latitudinal with the Pacific Ocean. The whole evolution history was just the one of pulling-apart, cutting-out, underthrusting and collision of the Central Asia- Mongolia Ocean and the Pacific Ocean. 2. The evolution characteristics of basins in Northeast Asia: mainly developed from longitudinal paste-up, collision and relaxation rifting motion in Paleozoic-Early Mesozoic Era and from underthrust, accretion, and receding of subducted zone of the Pacific Ocean in Late Mesozoic Era-Cenozoic Era. 3. The research in basin classification of Northeast Asia: According to geotectonic system, the basins can be classified into three types: intracratonic, pericratonic and active zone basin. And they can be further classified into 18 different types according to genetic mechanism and dynamic features. 4. The master control factors of oil and gas accumulation in Northeast Asia: high quality cap-rock for craton and pericrationic basin, the effective source rock and high quality cap-rock for Mesozoic rifted basins, intra-arc, fore-arc and back-arc basins. Graded exploration potential of oil and gas for basin in Northeast Asia according to 7 factor, hereby, divided the oil and gas potential of basins into 5 levels. 5. Evaluation of hydrocarbon resources: The difference of resource potential among these basins is huge in Northeast Asia. The evaluation of Mesozoic rifted basin and Pacific Ocean basin showed that the large scale rifted basin and retroarc basin(including backarc marginal sea basin) have great resource potential. 6. The writer believes that the next step should pay more attention to the evaluation of petroleum resource in Far East part of Russia and trace them. On the other hand, according to integrated analysis of oil/gas resource potential and the operation difficulty in this area, suggests that East-Siberia basin, East-Gobi-Tamchag basin, Sakhalin basin, North-Okhotck basin, West-Kamchatka basin could be as cooperation priority basins in future.

东濮凹陷低阻油层形成机理与评价方法研究

In order to effectively identify and accurately evaluate low resistivity reservoir in Dongpu depression, using various logging data synthetically, geological and logging characteristics are summarized in term of different blocks on the basis of core analysis, cutting logging, oil testing and commissioning data. The formation mechanism of low resistivity reservoir is studied, and the main factors that cause low resistivity reservoir are discovered. The first factor is fine lithology, high shale content and hydrophilic rock. The second factor is high salinity formation water. The third factor is light oil, high gas quantity dissolved and large difference density of oil-water. The last factor is low amplitude structure of reservoir and low differential degree of oil-water. According to the characteristics of low resistivity reservoir, the method of compound lithology, the method of movable fluid, the method of phase permeability and the method of nuclear magnetic resonance logging are put forward. The compound lithology criterion of distinguishing hydrocarbon is founded in term of different blocks on the basis of electrical efficiency. The evaluation models of reservoir parameters are founded; whose core is oil saturation and phase permeability. In order to calculate oil saturation, the compound lithology model on the basis of electrical efficiency theory is chosen on condition that there is only the combination logging data of acoustic and induction; the W-S model is chosen on condition that there is all-around logging data. The calculational precision of oil saturation in low resistivity reservoir of work area is enhanced when the selection method is utilized. There are 1212 layers of reservoir newly added by the old well reexamination in the ten oil areas. The coincidence rate of logging interpretation reaches 83.2 percent according to the 74 well-times of oil testing or commissioning, which indicates that the distinguishing method and evaluation models of low resistivity reservoir above are feasible.By the reexamination, a ten million tons of proved reserves related to the low resistivity reservoir are newly added, consequently, the groundwork is established to increase reserve and production of old oilfields in the east of China and new livingness is added for the petroleum exploration and development in Dongpu depression.

南襄盆地泌阳凹陷断裂斜坡带构造特征与油气成藏

The faulted slope zone of Biyang depression, a multiple hydrocarbon accumulation zone lying in a rich oil depression of Nanxiang basin, is a structural-sedimentary compounded slope, which is developed in Yanshanian period and has an area of 500 km2. From the ‘bottom up’, the developed strata may be divided into Yuhuangding formation in Neogene, Dacang Fang, Hetao-yuan plus Liaozhuang formations and Fenghuangzheng plus Pingyuan formation in Neogene, while Hetao-yuan formation is the main hydrocarbon-bearing target. Because of transtensional stress fields formed by persistent action of large-scale faulting in the south of the depression, sedimentary differential compaction in different stages, and tectonic inversion in later developing stage of the depression, a series of nose structure zones cut by different strike faults are developed. Therefore, the reservoir migration and accumulation are controlled by the complex faulted-nose structural zone, reservoir types are dominated by faulted-noses, faulted-blocks and fault-lithology, while lithology and stratigraphic unconformable reservoirs are locally developed. In combination with demands of practical production, applying with a new research approach of systematology and a combination with dynamic and static modes, guided by modern petroleum geologic theory, and based on previous data and studies, new techniques, methods of geophysical exploration, various computer simulation and forecasting techniques are applied in the new research of this paper. Starting from the structural features and formation mechanism, the forming mechanism of faulted structure, conditions and controlling factors of hydrocarbon accumulation, as well as various space-time allocation relationships in the process of accumulation are analyzed in the research. Besides that, the hydrocarbon migration, accumulation mechanism and dynamic evolution process are also discussed in the paper. Through the research, the accumulation rule of the faulted slope zone in faulted lake basin, the distribution and enrichment regularity of different reservoir controlling factors are systematically summarized. The summarizations indicate that the faulted slope is a favorable orientational zone, hydrocarbon is accumulated in nose structures and enriched in the main body of nose structures, faulted transformation zone and the ascent direction of laddering faulted blocks, the faults are the controlling factors, hydrocarbon accumulation zones controlled by fault-lithology are distributed along the faulting direcion. In the end, hydrocarbon migration and accumulation models of complex faulted-nose blocks are established. 1) Down cut model—‘flank-sheet’: the hydrocarbon is migrated like ‘sheet’ along a series of faults with parallel distribution and accumulated in the flank of nose structures; 2）Cross cut --‘axis-string’ model: the hydrocarbon cutting across the faults is migrated like ‘string’ and accumulated in the axis of nose structures. In view of different distribution models, reservoir forming combination patterns are divided and hydrocarbon reservoir evaluation exploration is carried out, which achieves good results in application. Key words: faulted slope zone; migration and accumulation model; reservoir controlling mechanism; reservoir-forming combination

典型人类活动对边坡变形及稳定性的影响研究

China is a mountainous country in which geological hazards occurred frequently, especially in the east of China. Except the geology, topography and extreme climate, the large scale human activities have become a major factor to landslides. Typical human activities which induced landslides are fill, cut and underground mining. On the topic of the deformation mechanism and slope stability, taking three different man-made slopes as examples, deformation mechanism and slope stability were studied by several methods, such as field work, numerical modeling and monitor. The details are as following: (1) The numerical modeling approach advantages over other conventional methods such as limit methods, so the numerical modeling is the major tool in this thesis. So far, there is no uniform failure criterion for numerical simulation. The failure criterion were summarized and analyzed firstly, subsequently the appropriate criterion was determinated. (2) Taking 220kV Yanjin transformation substation fill slope as example, the deformable characteristic, unstable mode and laboratory tests were studied systematically. The results show: the slope deformation was probably caused by a combination effect of unfavorable topographic, geological and hydro geological conditions, and external loading due to filling. It was concluded that the creep deformation of the slope was triggered by external loading applied at the back of the slope. In order to define the calculating parameters, a set of consolidated drained (CD) tests, consolidated undrained (CU) tests, repeated direct shear tests and UCS tests were carried out. The stability of the slope before and after reinforcement was assessed using 3D numerical modeling and shear strength reduction technique. The numerical modeling results showed: the factor of safety (FOS) of the slope was 1.10 in the natural state, and reduced to 1.03 after fill, which was close to the critical state and it caused creeping slip or deformation under rainfall. The failure surface in the slope is in active shear failure, whereas tensile failure occurs at the slope crest. After the site was reinforced with piles, the FOS was 1.27. Therefore, the slope is stable after reinforcement measures were taken. (3) The cut slope stability is a complex problem. Taking the left cut slope of Xiangjiaba as example in this thesis, the deformation and slope stability were studied systematically by numerical modeling and monitor methods. The numerical results show: the displacement is gradually increasing along with the cutting, and the largest displacement is 27.5mm which located at the bench between the elevation 340 and 380. Some failure state units distribute near the undermining part and there is no linked failure state occurred from crest to bottom during cutting. After cutting, some failure units appeared at the ground surface between elevation 340 and 360. The increasing tense stress made the disturbed rock failed. The slope is stable after cutting by the monitor method, such as surface monitor, multipoint displacement meter, inclinometer and anchor cable tensometer. (4) The interaction between underground mining and slope stability is a common situation in mountainous. The slope deformation mechanism induced by underground mining may contributed significantly to slope destabilization. The Mabukan slope in xiangjiaba was analyzed to illustrate this. Failure mechanism and the slope stability were presented by numerical modeling and residual deformation monitor. The results show: the roof deformed to the free face and the floor uplift lightly to the free face. The subsidence basin is formed, but the subsidence and the horizontal movement is small, and there is no failure zone occurred. When the underground mining is going on, the roof deformation, subsidence and the horizontal movements begin increasing. The rock deformation near the free face is larger than the ground surface, and the interaction between these coal seams appeared. There are some tensile failures and shear failures occurred on the roof and floor, and a majority of failure is tensile failure. The roof deformation, subsidence and the horizontal movements increased obviously along with the underground mining. The failure characteristic is shear failure which means the tensile stress transformed to the compressive stress. So the underground mining will induced tensile stress first which lead to structure crack, subsequently the compressive stress appeared which result in slippage. The crest was subjected to horizontal tension which made the rock crack along with the joint. The long term residual deformation monitor demonstrates that the slope is stable after the underground mining stopped.

岩石磨蚀性和TBM滚刀磨损机理研究

Using the popular CERCHAR testing to measure the abrasiveness of rock which is CERCHAR abrasiveness index(CAI). The digital imagine processing program IPP is used to quantify the rock texture such as the grain size, the shape of grain and the index of grain homogeneity. And the rock mechanical testing machine are used to measure the strength, hardness and elastic modulus. Basic on these three experiments, this paper finds the relationship between the CAI and physical and mechanical properties of rock. They are both the mesostructure and macroscopical properties of rock. According to the theory of tribology and wear, this paper finds the disc cutter wear mechanism during the machine and rock interaction process. The detail research results are as follows: (1) The size and form of the mineral grains constituting the rocks affect the abrasiveness of the rock. The rock abrasiveness CAI is a function of the product of the texture coefficient(TC) multiplying equivalent quarts content(Q%). (2) There is no obvious relationship between the rock abrasiveness CAI and the single macroscopical property of rock such as hardness, unconfined compressive strength, tensile strength and elastic modulus. But when taking the texture coefficient(TC) and the mineral composition in consideration, it shows that the rock abrasiveness CAI is relative to the combination of the rock mechanical property, the texture coefficient(TC) and the mineral composition. That is to say various factors which are from the mesostructure feature to the macroscopical property of rock control the rock abrasiveness. (3) The disc cutter penetrating into rock is a machine/rock interaction process. During this interaction, the wear of disc cutter is mainly coming from the abrasive of abrasiveness matters. First, the surface of the cutter ring is hunched, and then the material of the cutter ring is being wiped off during the iterative interaction. Second, the hard mineral in the rock and the muck will microcosmic cutting the surface material of cutter ring. (4) The disc cutters consumption is determined by the machine parameters and the geology condition. The machine parameters include the thrust and the revolution rate of the cutterhead. The geology condition include two aspects: the macroscopical properties which are the strength and/or hardness of rock, the presence of discontinuities in rock mass, the hardness, sharp, edge and size of the muck and so on. And the mesostructure features which are the hard mineral composition, the sharp and size of the grain of the rock.