Designing a new robust on-line secondary path modeling technique for feedforward active noise control systems

Several approaches have been introduced in the literature for active noise control (ANC) systems. Since the filtered-x least-mean-square (FxLMS) algorithm appears to be the best choice as a controller filter, researchers tend to improve performance of ANC systems by enhancing and modifying this algorithm. This paper proposes a new version of the FxLMS algorithm, as a first novelty. In many ANC applications, an on-line secondary path modeling method using white noise as a training signal is required to ensure convergence of the system. As a second novelty, this paper proposes a new approach for on-line secondary path modeling on the basis of a new variable-step-size (VSS) LMS algorithm in feed forward ANC systems. The proposed algorithm is designed so that the noise injection is stopped at the optimum point when the modeling accuracy is sufficient. In this approach, a sudden change in the secondary path during operation makes the algorithm reactivate injection of the white noise to re-adjust the secondary path estimate. Comparative simulation results shown in this paper indicate the effectiveness of the proposed approach in reducing both narrow-band and broad-band noise. In addition, the proposed ANC system is robust against sudden changes of the secondary path model.

An efficient online secondary path estimation for feedback active noise control systems

In practical cases for active noise control (ANC), the secondary path has usually a time varying behavior. For these cases, an online secondary path modeling method that uses a white noise as a training signal is required to ensure convergence of the system. The modeling accuracy and the convergence rate are increased when a white noise with a larger variance is used. However, the larger variance increases the residual noise, which decreases performance of the system and additionally causes instability problem to feedback structures. A sudden change in the secondary path leads to divergence of the online secondary path modeling filter. To overcome these problems, this paper proposes a new approach for online secondary path modeling in feedback ANC systems. The proposed algorithm uses the advantages of white noise with larger variance to model the secondary path, but the injection is stopped at the optimum point to increase performance of the algorithm and to prevent the instability effect of the white noise. In this approach, instead of continuous injection of the white noise, a sudden change in secondary path during the operation makes the algorithm to reactivate injection of the white noise to correct the secondary path estimation. In addition, the proposed method models the secondary path without the need of using off-line estimation of the secondary path. Considering the above features increases the convergence rate and modeling accuracy, which results in a high system performance. Computer simulation results shown in this paper indicate effectiveness of the proposed method.

What vs how : comparing students' testing and coding skills

The well-known difficulties students exhibit when learning to program are often characterised as either difficulties in understanding the problem to be solved or difficulties in devising and coding a computational solution. It would therefore be helpful to understand which of these gives students the greatest trouble. Unit testing is a mainstay of large-scale software development and maintenance. A unit test suite serves not only for acceptance testing, but is also a form of requirements specification, as exemplified by agile programming methodologies in which the tests are developed before the corresponding program code. In order to better understand students’ conceptual difficulties with programming, we conducted a series of experiments in which students were required to write both unit tests and program code for non-trivial problems. Their code and tests were then assessed separately for correctness and ‘coverage’, respectively. The results allowed us to directly compare students’ abilities to characterise a computational problem, as a unit test suite, and develop a corresponding solution, as executable code. Since understanding a problem is a pre-requisite to solving it, we expected students’ unit testing skills to be a strong predictor of their ability to successfully implement the corresponding program. Instead, however, we found that students’testing abilities lag well behind their coding skills.

Adaptive metering algorithm for electronic commercial vehicle preclearance systems

This paper presents an adaptive metering algorithm for enhancing the electronic screening (e-screening) operation at truck weight stations. This algorithm uses a feedback control mechanism to control the level of truck vehicles entering the weight station. The basic operation of the algorithm allows more trucks to be inspected when the weight station is underutilized by adjusting the weight threshold lower. Alternatively, the algorithm restricts the number of trucks to inspect when the station is overutilized to prevent queue spillover. The proposed control concept is demonstrated and evaluated in a simulation environment. The simulation results demonstrate the considerable benefits of the proposed algorithm in improving overweight enforcement with minimal negative impacts on nonoverweighed trucks. The test results also reveal that the effectiveness of the algorithm improves with higher truck participation rates in the e-screening program.

Evaluating the effectiveness of heat warning systems : a systematic review of epidemiological evidence

Objectives To review the existing research on the effectiveness of heat warning systems (HWSs) in saving lives and reducing harm. Methods A systematic search of major databases was conducted, using “heat, heatwave, high temperature, hot temperature, OR hot climate” AND “warning system”. Results Fifteen articles were retrieved. Six studies asserted that fewer people died of excessive heat after HWS implementation. HWS was associated with reduction in ambulance use. One study estimated the benefits of HWS to be 468millionforsaving117livescomparedto210,000 costs of running the system. Eight studies showed that mere availability of HWS did not lead to behavioral changes. Perceived threat of heat dangers to self/others was the main factor related to heeding warnings and taking proper actions. However, costs and barriers associated with taking protective actions, such as costs of running air conditioners, were of significant concern particularly to the poor. Conclusions Research in this area is limited. Prospective designs applying health behavior theories should establish whether HWS can produce the health benefits they are purported to achieve by identifying the target vulnerable groups.

Are heat warning systems effective?

Heatwaves are associated with significant health risks particularly among vulnerable groups. To minimize these risks, heat warning systems have been implemented. The question therefore is how effective these systems are in saving lives and reducing heat-related harm. We systematically searched and reviewed 15 studies which examined this. Six studies asserted that fewer people died of excessive heat after the implementation of heat warning systems. Demand for ambulance decreased following the implementation of these systems. One study also estimated the costs of running heat warning systems at US$210,000 compared to the US$468 million benefits of saving 117 lives. The remaining eight studies investigated people?s response to heat warning systems and taking appropriate actions against heat harms. Perceived threat of heat dangers emerged as the main factor related to heeding the warnings and taking proper actions. However, barriers, such as costs of running air-conditioners, were of significant concern, particularly to the poor. The weight of the evidence suggests that heat warning systems are effective in reducing mortality and, potentially, morbidity. However, their effectiveness may be mediated by cognitive, emotive and socio-demographic characteristics. More research is urgently required into the cost-effectiveness of heat warning systems? measures and improving the utilization of the services.

Service management and engineering in information systems research

Service research in information systems (IS) has received attention over many years (e.g. Kettinger and Lee, 1994), but more recently has increased substantially in both diversity and volume (Rai and Sambamurthy, 2006). A service-oriented view of information technology (IT) is gradually taking hold in both academia and industry. This is concomitant with the growth of service-related phenomena and concepts (Lusch and Vargo, 2006), stimulating a global discourse about 'service science' as a new, cross-disciplinary field of research (Chesbrough and Spohrer, 2006).

Fire safety of steel wall systems using enhanced plasterboards

Fire safety design is important to eliminate the loss of property and lives during fire events. Gypsum plasterboard is widely used as a fire safety material in the building industry all over the world. It contains gypsum (CaSO4.2H2O) and Calcium Carbonate (CaCO3) and most importantly free and chemically bound water in its crystal structure. The dehydration of the gypsum and the decomposition of Calcium Carbonate absorb heat, which gives the gypsum plasterboard fire resistant qualities. Currently plasterboard manufacturers use additives such as vermiculite to overcome shrinkage of gypsum core and glass fibre to bridge shrinkage cracks and enhance the integrity of board during calcination and after the loss of paper facings in fires. Past research has also attempted to reduce the thermal conductivity of plasterboards using fillers. However, no research has been undertaken to enhance the specific heat of plasterboard and the points of dehydration using chemical additives and fillers. Hence detailed experimental studies of powdered samples of plasterboard mixed with chemical additives and fillers in varying proportions were conducted. These tests showed the enhancement of specific heat of plasterboard. Numerical models were also developed to investigate the thermal performance of enhanced plasterboards under standard fire conditions. The results showed that the use of these enhanced plasterboards in steel wall systems can significantly improve their fire performance. This paper presents the details of this research and the results that can be used to enhance the fire safety of steel wall systems commonly used in buildings.

Protection of structural systems and mechanisms from catastrophic and life-threatening failure caused by unforeseeable events

Structural framing systems and mechanisms designed for normal use rarely possess adequate robustness to withstand the effects of large impacts, blasts and extreme earthquakes that have been experienced in recent times. Robustness is the property of systems that enables them to survive unforeseen or unusual circumstances (Knoll & Vogel, 2009). Queensland University of Technology with industry collaboration is engaged in a program of research that commenced 15 years ago to study the impact of such unforeseeable phenomena and investigate methods of improving robustness and safety with protective mechanisms embedded or designed in structural systems. This paper highlights some of the research pertaining to seismic protection of building structures, rollover protective structures and effects of vehicular impact and blast on key elements in structures that could propagate catastrophic and disproportionate collapse.

The role of human factors when evaluating information accountability for eHealth systems

The availability of health information is rapidly increasing; its expansion and proliferation is inevitable. At the same time, breeding of health information silos is an unstoppable and relentless exercise. Information security and privacy concerns are therefore major barriers in the eHealth socio-eco system. We proposed Information Accountability as a measurable human factor that should eliminate and mitigate security concerns. Information accountability measures would be practicable and feasible if legislative requirements are also embedded. In this context, information accountability constitutes a key component for the development of effective information technology requirements for health information system. Our conceptual approach to measuring human factors related to information accountability in eHealth is presented in this paper with some limitations.

A variable step-size FxLMS algorithm for feedforward active noise control systems based on a new online secondary path modelling technique

Several approaches have been introduced in literature for active noise control (ANC) systems. Since FxLMS algorithm appears to be the best choice as a controller filter, researchers tend to improve performance of ANC systems by enhancing and modifying this algorithm. This paper proposes a new version of FxLMS algorithm. In many ANC applications an online secondary path modelling method using a white noise as a training signal is required to ensure convergence of the system. This paper also proposes a new approach for online secondary path modelling in feedfoward ANC systems. The proposed algorithm stops injection of the white noise at the optimum point and reactivate the injection during the operation, if needed, to maintain performance of the system. Benefiting new version of FxLMS algorithm and not continually injection of white noise makes the system more desirable and improves the noise attenuation performance. Comparative simulation results indicate effectiveness of the proposed approach.

A new online secondary path modelling method for feedforward active noise control systems

An online secondary path modelling method using a white noise as a training signal is required in many applications of active noise control (ANC) to ensure convergence of the system. Not continually injection of white noise during system operation makes the system more desirable. The purposes of the proposed method are two folds: controlling white noise by preventing continually injection, and benefiting white noise with a larger variance. The modelling accuracy and the convergence rate increase when a white noise with larger variance is used, however larger the variance increases the residual noise, which decreases performance of the system. This paper proposes a new approach for online secondary path modelling in feedfoward ANC systems. The proposed algorithm uses the advantages of the white noise with larger variance to model the secondary path, but the injection is stopped at the optimum point to increase performance of the system. Comparative simulation results shown in this paper indicate effectiveness of the proposed approach in controlling active noise.

The correlation between electric field emission phenomenon and Schottky contact reverse bias characteristics in nanostructured systems

Two different morphologies of nanotextured molybdenum oxide were deposited by thermal evaporation. By measuring their field emission (FE) properties, an enhancement factor was extracted. Subsequently, these films were coated with a thin layer of Pt to form Schottky contacts. The current-voltage (I-V) characteristics showed low magnitude reverse breakdown voltages, which we attributed to the localized electric field enhancement. An enhancement factor was obtained from the I-V curves. We will show that the enhancement factor extracted from the I-V curves is in good agreement with the enhancement factor extracted from the FE measurements.

State of multilevel research perspective in the information systems discipline

Existing distinctions among macro and micro approaches have been jeopardising the advances of Information Systems (IS) research. Both approaches have been criticized for explaining one level while neglecting the other; thereby, the current situation necessitates the application of multilevel research for revealing the deficiencies. Instead of studying single level (macro or micro), multilevel research entails more than one level of conceptualization and analysis, simultaneously. As the notion of multilevel is borrowed from reference disciplines, there tends to be confusions and inconsistencies within the IS discipline, which hinders the adoption of multilevel research. This paper speaks for the potential value of multilevel research, by investigating the current application status of multilevel research within the IS domain. A content analysis of multilevel research articles from major IS conferences and journals is presented. Analysis results suggest that IS scholars have applied multilevel research to produce high quality work ranging from a variety of topics. However, researchers have not yet been consistently defining “multilevel”, leading to idiosyncratic meanings of multilevel research, most often, in authors’ own interpretations. We argue that a rigorous definition of “multilevel research” needs to be explicated for consistencies in research community.

Qualitative methods in information systems research

Qualitative research methods are widely accepted in Information Systems and multiple approaches have been successfully used in IS qualitative studies over the years. These approaches include narrative analysis, discourse analysis, grounded theory, case study, ethnography and phenomenological analysis. Guided by critical, interpretive and positivist epistemologies (Myers 1997), qualitative methods are continuously growing in importance in our research community. In this special issue, we adopt Van Maanen's (1979: 520) definition of qualitative research as an umbrella term to cover an “array of interpretive techniques that can describe, decode, translate, and otherwise come to terms with the meaning, not the frequency, of certain more or less naturally occurring phenomena in the social world”. In the call for papers, we stated that the aim of the special issue was to provide a forum within which we can present and debate the significant number of issues, results and questions arising from the pluralistic approach to qualitative research in Information Systems. We recognise both the potential and the challenges that qualitative approaches offers for accessing the different layers and dimensions of a complex and constructed social reality (Orlikowski, 1993). The special issue is also a response to the need to showcase the current state of the art in IS qualitative research and highlight advances and issues encountered in the process of continuous learning that includes questions about its ontology, epistemological tenets, theoretical contributions and practical applications.