Can Drag Force Suppress Fermi Acceleration in a Bouncer Model?

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Phase-Locked loops lock-in range in Frequency Modulated-Atomic Force Microscope nonlinear control system

Since the mid 1980s the Atomic Force Microscope is one the most powerful tools to perform surface investigation, and since 1995 Non-Contact AFM achieved true atomic resolution. The Frequency-Modulated Atomic Force Microscope (FM-AFM) operates in the dynamic mode, which means that the control system of the FM-AFM must force the micro-cantilever to oscillate with constant amplitude and frequency. However, tip-sample interaction forces cause modulations in the microcantilever motion. A Phase-Locked loop (PLL) is used to demodulate the tip-sample interaction forces from the microcantilever motion. The demodulated signal is used as the feedback signal to the control system, and to generate both topographic and dissipation images. As a consequence, a proper design of the PLL is vital to the FM-AFM performance. In this work, using bifurcation analysis, the lock-in range of the PLL is determined as a function of the frequency shift (Q) of the microcantilever and of the other design parameters, providing a technique to properly design the PLL in the FM-AFM system. (C) 2011 Elsevier B.V. All rights reserved.

Phase-Locked Loop design applied to frequency-modulated atomic force microscope

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Non-uniform drag force on the Fermi accelerator model

Some dynamical properties of a particle suffering the action of a generic drag force are obtained for a dissipative Fermi Acceleration model. The dissipation is introduced via a viscous drag force, like a gas, and is assumed to be proportional to a power of the velocity: F alpha -nu(gamma). The dynamics is described by a two-dimensional nonlinear area-contracting mapping obtained via the solution of Newton's second law of motion. We prove analytically that the decay of high energy is given by a continued fraction which recovers the following expressions: (i) linear for gamma = 1; (ii) exponential for gamma = 2; and (iii) second-degree polynomial type for gamma = 1.5. Our results are discussed for both the complete version and the simplified version. The procedure used in the present paper can be extended to many different kinds of system, including a class of billiards problems.

Theoretical Models for Surface Forces and Adhesion and Their Measurement Using Atomic Force Microscopy

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Poly(glutamic acid) nanofibre modified glassy carbon electrode: Characterization by atomic force microscopy, voltammetry and electrochemical impedance

Glassy carbon electrodes (GCE) were modified with poly(glutamic acid) acid films prepared using three different procedures: glutamic acid monomer electropolymerization (MONO), evaporation of poly(glutamic acid) (PAG) and evaporation of a mixture of poly(glutamic acid)/glutaraldehyde (PAG/GLU). All three films showed good adherence to the electrode surface. The performance of the modified GCE was investigated by cyclic voltammetry and differential pulse voltammetry, and the films were characterized by atomic force microscopy (AFM) and electrochemical impedance spectroscopy (EIS). The three poly(glutamic acid) modified GCEs were tested using the electrochemical oxidation of ascorbic acid and a decrease of the overpotential and the improvement of the oxidation peak current was observed. The PAG modified electrode surfaces gave the best results. AFM morphological images showed a polymeric network film formed by well-defined nanofibres that may undergo extensive swelling in solution, allowing an easier electron transfer and higher oxidation peaks. (C) 2007 Elsevier Ltd. All rights reserved.

Label-free DNA detection of hepatitis C virus based on modified conducting polypyrrole films at microelectrodes and atomic force microscopy tip-integrated electrodes

We present a new strategy for the label-free electrochemical detection of DNA hybridization for detecting hepatitis C virus based on electrostatic modulation of the ion-exchange kinetics of a polypyrrole film deposited at microelectrodes. Synthetic single-stranded 18-mer HCV genotype-1-specific probe DNA has been immobilized at a 2,5-bis(2-thienyl)-N-(3-phosphoryl-n-alkyl)pyrrole film established by electropolymerization at the previously formed polypyrrole layer. HCV DNA sequences (244-mer) resulting from the reverse transcriptase-linked polymerase chain reaction amplification of the original viral RNA were monitored by affecting the ion-exchange properties of the polypyrrole film. The performance of this miniaturized DNA sensor system was studied in respect to selectivity, sensitivity, and reproducibility. The limit of detection was determined at 1.82 x 10(-21) mol L-1. Control experiments were performed with cDNA from HCV genotypes 2a/c, 2b, and 3 and did not show any unspecific binding. Additionally, the influence of the spacer length of 2,5-bis(2-thienyl)-N-(3-phosphoryl-n-alkyl)pyrrole on the behavior of the DNA sensor was investigated. This biosensing scheme was finally extended to the electrochemical detection of DNA at submicrometer-sized DNA biosensors integrated into bifunctional atomic force scanning electrochemical microscopy probes. The 18-mer DNA target was again monitored by following the ion-exchange properties of the polypyrrole film. Control experiments were performed with 12-base pair mismatched sequences.

Identification of Eimeria mitis and Eimeria praecox in broiler feces using polymerase chain reaction

There are few reports concerning the epidemiology of Eimeria praecox and Eimeria mitis in Brazil. In the present experiment, the polymerase chain reaction (PCR) was used to identify these species in 156 samples of broiler chicken feces from several Brazilian states and the Federal District. Oocysts present in feces samples were purified by sodium chloride flotation followed by addition of DNAzol reagent (Invitrogen®) for extraction of genomic DNA. DNA was precipitated and stored following DNAzol reagent manufacture's instructions. The primers and PCR conditions were as described by Schnitzler et al. (1999). In the 156 field samples analyzed by PCR, 70 and 45 were positive for E. praecox and E. mitis, respectively. In this study we have shown that DNA extraction using DNAzol followed by PCR can be a useful tool in epidemiological studies, since it provides fast and reliable detection of Eimeria sp. in field samples.

Probiotics for broiler chickens in Brazil: systematic review and meta-analysis

This study evaluated the efficacy of probiotic utilization as growth promoters in broiler chicken feeding using systematic literature review and meta-analysis. Thirty-five studies were recovered by the systematic review, 27 of which met the following criteria to be included in the meta-analysis: (1) Brazilian studies published between 1995 and 2005; (2) probiotics administered in the diet without growth promoter; (3) results included performance data with the respective coefficient of variation. Meta-analysis have shown that the probiotics promoted better weight gain and feed conversion than the negative control (no antimicrobial) in the initial phase (1 to 20-28 days); nevertheless, results were similar in the total period (1 to 35-48 days). Weight gain and feed conversion were similar between probiotics and the positive control (with antimicrobial) both in the initial and in the total periods. Viability in the total period improved with the use of probiotics in comparison to the negative or positive controls. Sensitivity analysis showed that the results of meta-analysis were coherent. The funnel plots and the Egger regression method evidenced that the studies published in Brazil do not present biased results. It is possible to conclude that the probiotics are a technically viable alternative to antimicrobial growth promoters in broiler feeding. Nevertheless, further studies are necessary to identify eventual differences among the probiotics commercially available in Brazil.

Seasonal variation of Alphitobius diaperinus population in broiler facilities in the center-north region of the state of São Paulo

The seasonality of Alphitobius diaperinus population was studied during different seasons during one year, in broiler facilities located in the center-north region of the State of São Paulo. Parasite counting was weekly carried out by the use of traps adapted from the modified model of Arends. During the experimental period, facilities were not submitted to chemical treatment, and the litter was changed between flocks. A lower number of adults and larvae was observed during autumn, with the peak registered in the summer. There was no significant difference between spring and winter averages (adults and larvae), and between spring and summer averages (adults). Average temperatures in the facilities varied from 23.4ºC (winter) to 27.1ºC (spring). The environmentally controlled systems used by the broiler industry provide an adequate habitat for A. diaperinus development. The continuous monitoring of the population of this parasite is essential for designing control strategies, and this can be accomplished by utilizing the traps used in the present experiment.

Evaluation of recycled tiles and OSB ceiling materials in closed broiler house prototypes

This study aimed at evaluating the thermal performance of a modular ceiling system for poultry houses. The reduced- and distorted-scale prototypes used ceiling modules made of reforested wood and were covered with recycled long-life package tiles. The following parameters were measured for 21 days: tile internal surface temperature (ST), globe temperature and humidity index (WBGT), and radiant heat load (RHL). Measurements were made at times of highest heat load (11:00 am, 13:00 pm, and 03:00 pm). Collected data were analyzed by R statistics software. Means were compared by multiple comparison test (Tukey) and linear regression was performed, both at 5% significance level. The results showed that the prototype with the ceiling was more efficient to reduce internal tile surface temperature; however, this was not sufficient to provide a comfortable environment for broilers during the growout. Therefore, other techniques to provide proper cooling are required in addition to the ceiling.

Broiler walking ability and toe asymmetry under harsh rearing conditions

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Broiler litter reutilization applying different composting concepts

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of broiler chicken age on ileal digestibility of corn germ meal

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Logistic regression to estimate the welfare of broiler breeders in relation to environmental and behavioral variables

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)