Suomen kasvihuonekaasupäästöt Kioton pöytäkirjan ensimmäisen sopimuskauden lopussa – kokonaistilanne ja vähentämistoimenpiteet

Tämä diplomityö on läpileikkaus kasvihuonekaasupäästöistä sekä niitä koskevista vähennystoimenpiteistä Suomessa Kioton pöytäkirjan ensimmäisen sopimuskauden lopussa. Työ on toteutettu kirjallisuustutkimuksena ja siihen on käytetty painettuja sekä sähköisiä lähteitä. Huoli ilmastonmuutoksesta on saanut aikaan sen, että kasvihuonekaasupäästöjä rajoitetaan tänä päivänä kansainvälisillä sopimuksilla. Vaikka kaikki suuretkaan päästäjämaat eivät ole sopimuksia ratifioineet, ovat EU-maat Suomi mukaan lukien sitoutuneet YK:n ilmastonmuutosta koskevaan puitesopimukseen ja sen noudattamiseen. Puitesopimusta tarkentavassa Kioton pöytäkirjassa EU sitoutui vähentämään kuuden eri kasvihuonekaasun kokonaispäästöjä yhteensä 8 prosenttia ajanjaksolla 2008–2012 vuoteen 1990 verrattuna. Kasvihuonekaasut, joita rajoitukset koskivat, olivat hiilidioksidi, metaani, dityppioksidi, fluorihiilivedyt, perfluorihiilivedyt ja rikkiheksafluoridi. EU:n sisäisessä taakanjaossa Suomen tavoite oli pitää päästöt vertailuvuoden 1990 tasossa ja Suomi alitti tämän noin viidellä prosentilla. Vuoden 2012 jälkeen Suomen kasvihuonekaasupäästöjen vähennystavoite on kiristynyt. Vuosille 2013–2020 Suomen tavoite on vähentää kasvihuonekaasupäästöjä 20 prosenttia alle perusvuoden 1990 tason. Työssä tutustutaan myös keinoihin, joilla aiempien ja tulevien päästöjenvähennystavoitteiden saavuttaminen on mahdollista. Näitä keinoja on mm. erilaisten biopolttoaineiden sekoittaminen fossiilisten polttoaineiden sekaan, energiatehokkuuden parantaminen ja biokaasun käytön lisääminen. Lisäksi työssä käsitellään eräitä merkityksellisiä käsitteitä, kuten EU:n päästökauppajärjestelmä ja hiilidioksidin talteenotto ja varastointi.

Double grade – rakenneputkien puristuskestävyys

Double grade S420MH/S355J2H – rakenneputki on Ruukin kylmämuovattujen rakenneputkien vakioteräslaji. Se voidaan mitoittaa joko lujuusluokan S355 tai S420 mukaisesti. Teräslajin S355 mukaisesti mitoitettaessa on suunnittelu yksinkertaista. Painonsäästöä ja pidennettyjä jännevälejä haluttaessa käytetään lujuusluokan S420 mukaista mitoitusta. Työn tavoitteena oli selvittää kylmämuovattujen teräsrakenneputkien todellinen puristuskestävyys. Eurocode 3:n mukaan kylmämuovatut teräsrakenneputket kuuluvat nurjahduskäyrälle c. Tutkimukseen valittiin viisi eri profiilia olevaa rakenneputkea, joiden poikkileikkausluokat olivat 1, 2, 3 ja 4. Käytettäessä rakenneputkia puristussauvoina, on teräksen käyttö tehokkainta poikkileikkausluokassa 3, lähellä poikkileikkausluokkaa 4. Rakenneputkista laskettiin muunnetun hoikkuuden arvoilla 0.1, 0.5, 1.0 ja 1.5 koesauvojen pituudet kaikille profiileille. Valmistettiin kolme samanlaista koesauvaa jokaisesta koosta ja puristuskokeita suoritettiin yhteensä 57 kappaletta. Koesauvojen todelliset pituudet, alkukäyryydet ja poikkileikkaukset mitattiin. Ainestodistuksista saatiin materiaalin todelliset lujuudet. Laskettiin Eurocode 3:n mukaisesti kestävyydet nurjahduskäyrille a, b ja c. Laskennallisia kestävyyksiä verrattiin puristuskokeiden tuloksiin. Puristuskokeiden tulosten perusteella voidaan b-käyrää pitää oikeana profiileille 100x100x3, 150,150x5 ja 200x200x6. Profiili 150x150x5 kuuluu poikkileikkausluokkaan 2. Profiilit 100x100x3 ja 200x200x6 kuuluvat poikkileikkausluokkaan 4. Profiili 50x50x2 kuuluu nurjahduskäyrälle c. Profiilin poikkileikkausluokka on 1 ja aiemmat tutkimukset tukevat nurjahduskäyrän c käyttöä. Profiilista 300x300x8.8 ei saatu testattua täyttä sarjaa sen suuren kapasiteetin rikottua testilaitteiston, mutta puristuskokeiden perusteella se kuuluu nurjahduskäyrälle b. Profiili kuuluu poikkileikkausluokkaan 4.

Biochemical profile of amniotic fluid for the assessment of fetal and renal development

Creatinine plays a key role in the function and maturation of fetal kidneys throughout pregnancy. It is important to identify other markers that may help in the diagnosis of renal dysfunction. Our aim was to determine the profile of and the correlation between biochemical markers to be used to assess renal function and maturation of the fetus in the amniotic fluid during pregnancy and to determine the distribution of normal values for creatinine, N-acetyl-ß-D-glucosaminidase (NAG), ß2-microglobulin, glucose, urea, sodium, potassium, phosphorus, calcium, uric acid, albumin, and osmolality in three gestational age groups. This was a cross-section study that assessed 115 samples of amniotic fluid during three different periods of pregnancy, i.e., 13 to 20, 27 to 34, and 36 to 42 weeks. Concentrations of creatinine, NAG, urea, potassium and uric acid increased during pregnancy (P<0.05). ß2-Microglobulin, glucose, sodium, phosphorus, calcium, and albumin concentration and osmolality decreased (P<0.05), whereas ß2-microglobulin, glucose and uric acid presented significant correlations with gestational age and creatinine, respectively (r>0.6, P<0.05). Urea, potassium and phosphorus showed mild correlations with both (r>0.5, P<0.05). NAG, sodium, albumin and osmolality did not show significant correlations (r<0.5, P<0.05). These tests confirmed the important role of creatinine in terms of correlation with gestational age. ß2-Microglobulin, glucose and uric acid were significant as markers of function and maturation of fetal kidneys, whereas NAG did not demonstrate a useful role for the assessment of renal maturation.

Acetylcholine and bradykinin enhance hypotension and affect the function of remodeled conduit arteries in SHR and SHR treated with nitric oxide donors

Discrepancy was found between enhanced hypotension and attenuated relaxation of conduit arteries in response to acetylcholine (ACh) and bradykinin (BK) in nitric oxide (NO)-deficient hypertension. The question is whether a similar phenomenon occurs in spontaneously hypertensive rats (SHR) with a different pathogenesis. Wistar rats, SHR, and SHR treated with NO donors [molsidomine (50 mg/kg) or pentaerythritol tetranitrate (100 mg/kg), twice a day, by gavage] were studied. After 6 weeks of treatment systolic blood pressure (BP) was increased significantly in experimental groups. Under anesthesia, the carotid artery was cannulated for BP recording and the jugular vein for drug administration. The iliac artery was used for in vitro studies and determination of geometry. Compared to control, SHR showed a significantly enhanced (P < 0.01) hypotensive response to ACh (1 and 10 µg, 87.9 ± 6.9 and 108.1 ± 5.1 vs 35.9 ± 4.7 and 64.0 ± 3.3 mmHg), and BK (100 µg, 106.7 ± 8.3 vs 53.3 ± 5.2 mmHg). SHR receiving NO donors yielded similar results. In contrast, maximum relaxation of the iliac artery in response to ACh was attenuated in SHR (12.1 ± 3.6 vs 74.2 ± 8.6% in controls, P < 0.01). Iliac artery inner diameter also increased (680 ± 46 vs 828 ± 28 µm in controls, P < 0.01). Wall thickness, wall cross-section area, wall thickness/inner diameter ratio increased significantly (P < 0.01). No differences were found in this respect among SHR and SHR treated with NO donors. These findings demonstrated enhanced hypotension and attenuated relaxation of the conduit artery in response to NO activators in SHR and in SHR treated with NO donors, a response similar to that found in NO-deficient hypertension.

Ristinivel nelivalssaimen voimansiirrossa

Nelivalssaimia käytetään yleisesti metallinauhojen ja -levyjen kylmämuovaukseen. Valssaimissa ristinivel siirtää vääntömomenttia kahden kulmassa olevan akselin välillä. Tässä tutkimuksessa haettiin ratkaisuja nelivalssaimessa esiintyvään epäsymmetriseen taivutustarpeeseen. Valssattavat kuparinauhat alkavat aaltoilla valssaajan puolelta noin yhden millimetrin paksuudessa. Tutkimuksen tarkastelu rajattiin koskemaan vain voimansiirrossa olevaa ristiniveltä, jonka epäiltiin olevan yksi mahdollinen ongelman aiheuttaja. Tutkimuksessa selvisi, että ristinivel ei aiheuta pystysuuntaisia voimia, jotka vaikuttaisivat suoraan nauhan poikkipintaprofiiliin. Kuitenkin ristinivelen aiheuttamat vaakasuuntaiset voimat voivat vaikuttaa epäsuorasti nauhan poikkipintaprofiiliin. Laatupoikkeamien taloudellinen merkitys havaittiin pieneksi, mutta myöhemmissä prosessivaiheissa kuparinauhan epäsymmetrinen poikkipintaprofiili aiheutti ongelmia.

Aircraft tracking and classification with vhf passive bistatic radar

Since the times preceding the Second World War the subject of aircraft tracking has been a core interest to both military and non-military aviation. During subsequent years both technology and configuration of the radars allowed the users to deploy it in numerous fields, such as over-the-horizon radar, ballistic missile early warning systems or forward scatter fences. The latter one was arranged in a bistatic configuration. The bistatic radar has continuously re-emerged over the last eighty years for its intriguing capabilities and challenging configuration and formulation. The bistatic radar arrangement is used as the basis of all the analyzes presented in this work. The aircraft tracking method of VHF Doppler-only information, developed in the first part of this study, is solely based on Doppler frequency readings in relation to time instances of their appearance. The corresponding inverse problem is solved by utilising a multistatic radar scenario with two receivers and one transmitter and using their frequency readings as a base for aircraft trajectory estimation. The quality of the resulting trajectory is then compared with ground-truth information based on ADS-B data. The second part of the study deals with the developement of a method for instantaneous Doppler curve extraction from within a VHF time-frequency representation of the transmitted signal, with a three receivers and one transmitter configuration, based on a priori knowledge of the probability density function of the first order derivative of the Doppler shift, and on a system of blocks for identifying, classifying and predicting the Doppler signal. The extraction capabilities of this set-up are tested with a recorded TV signal and simulated synthetic spectrograms. Further analyzes are devoted to more comprehensive testing of the capabilities of the extraction method. Besides testing the method, the classification of aircraft is performed on the extracted Bistatic Radar Cross Section profiles and the correlation between them for different types of aircraft. In order to properly estimate the profiles, the ADS-B aircraft location information is adjusted based on extracted Doppler frequency and then used for Bistatic Radar Cross Section estimation. The classification is based on seven types of aircraft grouped by their size into three classes.

Aineettomien riskien hallinta – case Itä-Suomen Biopankki

Aineeton pääoma nähdään organisaation keskeisenä kilpailutekijänä ja voimavarana. Se voi kuitenkin joissain tilanteissa olla organisaatiolle myös rasite tai jopa menestymistä heikentävä tekijä. Tutkimuksen tavoitteena oli laatia biopankin riskienhallinnalle malli, joka huomioi toimintaan vaikuttavat aineettomat riskitekijät ja toimii strategisena johtamisen ja toiminnan kehittämisen työvälineenä. Tutkimus toteutettiin tapaustutkimuksena, jossa käytettiin konstruktiivista tutkimusotetta. Biopankille luotiin konstruktio, riskienhallintamalli, jolla pyrittiin ratkaisemaan reaalimaailman ongelma ja samalla luomaan kontribuutiota tieteenalalle. Biopankki on uudentyyppinen organisaatio, joka kerää, hallinnoi ja säilyttää biologisia ihmisperäisiä näytteitä ja niihin liittyviä tietoja tulevaa tutkimusta varten. Toiminnan riskien taustasyyt ovat usein aineettomia, kuten toimintakulttuuri, asenne, osaaminen tai motivaatio. Tutkimuksessa löydettiin uusia biopankin toimintaan kytkeytyviä aineettomia riskejä koko aineettoman pääoman alueelta ja määriteltiin riskitasoihin perustuva lähestymistapa riskien hallintaan. Konstruktio aineettomien riskien hallintamalliksi sai selkeää vahvistusta tutkimuksen aineistosta, ja se voi toimia organisaation kehittämisen pohjana. Riskikartan luominen ja riskien arviointi ovat tekohetken poikkileikkauksia tilanteesta. Organisaation toiminta ja siihen kohdistuvat riskit ja mahdollisuudet muuttuvat ja kehittyvät. Riskien tunnistaminen lisää tietoa organisaatiosta ja sen toimintaympäristöstä, mikä luo puitteet myös uusien mahdollisuuksien tunnistamiselle. Sopivan riskienhallintamallin avulla voidaan löytää kilpailuetua suhteessa muihin organisaatioihin. Kilpailuetuna voi toimia myös muita parempi riskinkantokyky esimerkiksi toiminnan joustavuuden kautta.

Construction of 2D transparent micromodels in polyester resin with porosity similar to carrots

Microscopic visualization, especially in transparent micromodels, can provide valuable information to understand the transport phenomena at pore scale in different process occurring in porous materials (food, timber, soils, etc.). Micromodels studies focus mainly on the observation of multi-phase flow, which presents a greater proximity to reality. The aim of this study was to study the process of flexography and its application in the manufacture of polyester resin transparent micromodels and its application to carrots. Materials used to implement a flexo station for micromodels construction were thermoregulated water bath, exposure chamber to UV light, photosensitive substance (photopolymer), RTV silicone polyester resin, and glass plates. In this paper, data on size distribution of a particular kind of carrot we used, and a transparent micromodel with square cross-section as well as a Log-normal pore size distribution with pore radii ranging from 10 to 110 µm (average of 22 µm and micromodel size of 10 × 10 cm) were built. Finally, it stresses that it has successfully implemented the protocol processing 2D polyester resin transparent micromodels.

Simulation and material calibration of ultra high strength steel (UHSS) S960 welded joint under static tensile test utilizing finite element method (FEM)

The aim of this work was to calibrate the material properties including strength and strain values for different material zones of ultra-high strength steel (UHSS) welded joints under monotonic static loading. The UHSS is heat sensitive and softens by heat due to welding, the affected zone is heat affected zone (HAZ). In this regard, cylindrical specimens were cut out from welded joints of Strenx® 960 MC and Strenx® Tube 960 MH, were examined by tensile test. The hardness values of specimens’ cross section were measured. Using correlations between hardness and strength, initial material properties were obtained. The same size specimen with different zones of material same as real specimen were created and defined in finite element method (FEM) software with commercial brand Abaqus 6.14-1. The loading and boundary conditions were defined considering tensile test values. Using initial material properties made of hardness-strength correlations (true stress-strain values) as Abaqus main input, FEM is utilized to simulate the tensile test process. By comparing FEM Abaqus results with measured results of tensile test, initial material properties will be revised and reused as software input to be fully calibrated in such a way that FEM results and tensile test results deviate minimum. Two type of different S960 were used including 960 MC plates, and structural hollow section 960 MH X-joint. The joint is welded by BöhlerTM X96 filler material. In welded joints, typically the following zones appear: Weld (WEL), Heat affected zone (HAZ) coarse grained (HCG) and fine grained (HFG), annealed zone, and base material (BaM). Results showed that: The HAZ zone is softened due to heat input while welding. For all the specimens, the softened zone’s strength is decreased and makes it a weakest zone where fracture happens while loading. Stress concentration of a notched specimen can represent the properties of notched zone. The load-displacement diagram from FEM modeling matches with the experiments by the calibrated material properties by compromising two correlations of hardness and strength.

Viability of barley seeds by the tetrazolium test

The tetrazolium test is used to control seed quality of various plant species since it allows a rapid evaluation of viability. Freshly harvested barley seeds show dormancy that can make the germination test ineffective for an immediate evaluation. Therefore, the development of more efficient methods, such as the tetrazolium test, is necessary. The objective of this research work was to study various procedures for performing the tetrazolium test on barley seeds. Five lots of cv. BRS 195 barley seeds were used and subjected to the following treatments: two different methods of seed preconditioning (direct immersion in H2O and between sheets of moistened paper towels); two types of preparation for staining (longitudinal cross-section of the seed through the embryo with immersion of one half in a 2,3,5 triphenyl tetrazolium chloride solution or placing both halves on top of filter paper moistened with the tetrazolium salt solution); two methods of staining (on top of filter paper and direct immersion in the tetrazolium salt solution). Three concentrations of the tetrazolium salt solution (0.1%, 0.5%, and 1.0%) were used. It was concluded that the tetrazolium test on barley seeds may be accomplished with preconditioning by direct immersion in H2O and staining by immersing in a 0.1% or 0.5% concentration of tetrazolium salt solution or staining on top of filter paper moistened with such solution at a 1.0% concentration.

Developmental patterns of individiuals within a sensory-based learning environment in art education : insights emerging from a case study /

My research permitted me to reexamine my recent evaluations of the Leaf Project given to the Foundation Year students during the fall semester of 1997. My personal description of the drawing curriculum formed part of the matrix of the Foundation Core Studies at the Ontario College of Art and Design. Research was based on the random selection of 1 8 students distributed over six of my teaching groups. The entire process included a representation of all grade levels. The intent of the research was to provide a pattern of alternative insights that could provide a more meaningful method of evaluation for visual learners in an art education setting. Visual methods of learning are indeed complex and involve the interplay of many sensory modalities of input. Using a qualitative method of research analysis, a series of queries were proposed into a structured matrix grid for seeking out possible and emerging patterns of learning. The grid provided for interrelated visual and linguistic analysis with emphasis in reflection and interconnectedness. Sensory-based modes of learning are currently being studied and discussed amongst educators as alternative approaches to learning. As patterns emerged from the research, it became apparent that a paradigm for evaluation would have to be a progressive profile of the learning that would take into account many of the different and evolving learning processes of the individual. A broader review of the student's entire development within the Foundation Year Program would have to have a shared evaluation through a cross section of representative faculty in the program. The results from the research were never intended to be conclusive. We realized from the start that sensory-based learning is a difficult process to evaluate from traditional standards used in education. The potential of such a process of inquiry permits the researcher to ask for a set of queries that might provide for a deeper form of evaluation unique to the students and their related learning environment. Only in this context can qualitative methods be used to profile their learning experiences in an expressive and meaningful manner.

The mechanism of the regulation of energy distribution between photosystems 1 and 2 in the cyanobacterium Synechococcus sp. strain PCC 7002 /

Cyanobacteria are able to regulate the distribution of absorbed light energy between photo systems 1 and 2 in response to light conditions. The mechanism of this regulation (the state transition) was investigated in the marine cyanobacterium Synechococcus sp. strain PCC 7002. Three cell types were used: the wild type, psaL mutant (deletion of a photo system 1 subunit thought to be involved in photo system 1 trimerization) and the apcD mutant (a deletion of a phycobilisome subunit thought to be responsible for energy transfer to photo system 1). Evidence from 77K fluorescence emission spectroscopy, room temperature fluorescence and absorption cross-section measurements were used to determine a model of energy distribution from the phycobilisome and chlorophyll antennas in state 1 and state 2. The data confirm that in state 1 the phycobilisome is primarily attached to PS2. In state 2, a portion of the phycobilisome absorbed light energy is redistributed to photo system 1. This energy is directly transferred to photo system 1 by one of the phycobilisome terminal emitters, the product of the apcD gene, rather than via the photo system 2 chlorophyll antenna by spillover (energy transfer between the photo system 2 and photo system 1 chlorophyll antenna). The data also show that energy absorbed by the photo system 2 chlorophyll antenna is redistributed to photo system 1 in state 2. This could occur in one of two ways; by spillover or in a way analogous to higher plants where a segment of the chlorophyll antenna is dissociated from photo system 2 and becomes part of the photo system 1 antenna. The presence of energy transfer between neighbouring photo system 2 antennae was determined at both the phycobilisome and chlorophyll level, in states 1 and 2. Increases in antenna absorption cross-section with increasing reaction center closure showed that there is energy transfer (connectivity) between photosystem 2 antennas. No significant difference was shown in the amount of connectivity under these four conditions.

Confocal and two-photon microscopy : image enhancement /

Confocal and two-photon microcopy have become essential tools in biological research and today many investigations are not possible without their help. The valuable advantage that these two techniques offer is the ability of optical sectioning. Optical sectioning makes it possible to obtain 3D visuahzation of the structiu-es, and hence, valuable information of the structural relationships, the geometrical, and the morphological aspects of the specimen. The achievable lateral and axial resolutions by confocal and two-photon microscopy, similar to other optical imaging systems, are both defined by the diffraction theorem. Any aberration and imperfection present during the imaging results in broadening of the calculated theoretical resolution, blurring, geometrical distortions in the acquired images that interfere with the analysis of the structures, and lower the collected fluorescence from the specimen. The aberrations may have different causes and they can be classified by their sources such as specimen-induced aberrations, optics-induced aberrations, illumination aberrations, and misalignment aberrations. This thesis presents an investigation and study of image enhancement. The goal of this thesis was approached in two different directions. Initially, we investigated the sources of the imperfections. We propose methods to eliminate or minimize aberrations introduced during the image acquisition by optimizing the acquisition conditions. The impact on the resolution as a result of using a coverslip the thickness of which is mismatched with the one that the objective lens is designed for was shown and a novel technique was introduced in order to define the proper value on the correction collar of the lens. The amoimt of spherical aberration with regard to t he numerical aperture of the objective lens was investigated and it was shown that, based on the purpose of our imaging tasks, different numerical apertures must be used. The deformed beam cross section of the single-photon excitation source was corrected and the enhancement of the resolution and image quaUty was shown. Furthermore, the dependency of the scattered light on the excitation wavelength was shown empirically. In the second part, we continued the study of the image enhancement process by deconvolution techniques. Although deconvolution algorithms are used widely to improve the quality of the images, how well a deconvolution algorithm responds highly depends on the point spread function (PSF) of the imaging system applied to the algorithm and the level of its accuracy. We investigated approaches that can be done in order to obtain more precise PSF. Novel methods to improve the pattern of the PSF and reduce the noise are proposed. Furthermore, multiple soiu'ces to extract the PSFs of the imaging system are introduced and the empirical deconvolution results by using each of these PSFs are compared together. The results confirm that a greater improvement attained by applying the in situ PSF during the deconvolution process.

A cognitive schematic paradigm for expository essay writing in secondary schools

The methodology outlined in this study for teaching exposit ory writing to advanced (five year phase) grade eleven students is based on the assumption that writing as a problem solving strategy is a high level cognitive skill . In adhering to this assumption, a cognitively based schematic organizer known as a cross-classification chart was tested for its effectiveness a t the planning stage of the writing process . Results were not significant in any of the three components that were evaluated; however , a post- hoc analysis undertaken because of recorded observed data indicated a significant difference in the mean score on the Organization component for the treatment subgroup using the cross- classification organizer . Furthermore, the treatment group's positive response from the attitude survey towards planning writing is encouraging enough that replication and extension of the application of schema theory to wri ting should be pursued in cross-section and longitud i nal studies.

Implementation of hospital-wide computer information system :a case study of this change process

This case study examines the impact of a computer information system as it was being implemented in one Ontario hospital. The attitudes of a cross section of the hospital staff acted as a barometer to measure their perceptions of the implementation process. With The Mississauga Hospital in the early stages of an extensive computer implementation project, the opportunity existed to identify staff attitudes about the computer system, overall knowledge and compare the findings with the literature. The goal of the study was to develop a greater base about the affective domain in the relationship between people and the computer system. Eight exploratory questions shaped the focus of the investigation. Data were collected from three sources: a survey questionnaire, focused interviews, and internal hospital documents. Both quantitative and qualitative data were analyzed. Instrumentation in the study consisted of a survey distributed at two points in time to randomly selected hospital employees who represented all staff levels.Other sources of data included hospital documents, and twenty-five focused interviews with staff who replied to both surveys. Leavitt's socio-technical system, with its four subsystems: task, structure, technology, and people was used to classify staff responses to the research questions. The study findings revealed that the majority of respondents felt positive about using the computer as part of their jobs. No apparent correlations were found between sex, age, or staff group and feelings about using the computer. Differences in attitudes, and attitude changes were found in potential relationship to the element of time. Another difference was found in staff group and perception of being involved in the decision making process. These findings and other evidence about the role of change agents in this change process help to emphasize that planning change is one thing, managing the transition is another.