Dietary aspects of cow's milk allergy in young children

Cow s milk allergy (CMA) affects about 2-6% of infants and young children. Environmental factors during early life are suggested to play a role in the development of allergic diseases. One of these factors is likely to be maternal diet during pregnancy and lactation. The association between maternal diet and development of CMA in offspring is not well known, but diet could contain factors that facilitate development of tolerance. After an established food allergy, another issue is gaining tolerance towards an antigen that causes symptoms. The strictness of the elimination depends on the individual level of tolerance. This study aimed at validating a questionnaire used to inquire about food allergies in children, at researching associations between maternal diet during pregnancy and lactation and subsequent development of cow s milk allergy in the offspring, and at evaluating the degree of adherence to a therapeutic elimination diet of children with CMA and factors associated with the adherence and age of recovery. These research questions were addressed in a prospective birth cohort born between 1997 and 2004 at the Tampere and Oulu University Hospitals. Altogether 6753 children of the Diabetes Prediction and Prevention (DIPP) Nutrition cohort were investigated. Questionnaires regarding allergic diseases are often used in studies without validation. High-quality valid tools are therefore needed. Two validation studies were conducted here: one by comparing parentally reported food allergies with information gathered from patient records of 1122 children, and the other one by comparing parentally reported CMA with information in the reimbursement records of special infant formulae in the registers of the Social Insurance Institution for 6753 children. Both of these studies showed that the questionnaire works well and is a valid tool for measuring food allergies in children. In the first validation study, Cohen s kappa values were within 0.71-0.88 for CMA, 0.74-0.82 for cereal allergy, and 0.66-0.86 for any reported food allergy. In the second validation study, the kappa value was 0.79, sensitivity 0.958, and specificity 0.965 for reported and diagnosed CMA. To investigate the associations between maternal diet during pregnancy and lactation and CMA in offspring, 6288 children were studied. Maternal diet during pregnancy (8th month) and lactation (3rd month) was assessed by a validated, 181-item semi-quantitative food frequency questionnaire (FFQ), and as an endpoint register-based information on diagnosed CMA was obtained from the Social Insurance Institution and complemented with parental reports of CMA in their children. The associations between maternal food consumption and CMA in offspring were analyzed by logistic regression comparing the highest and lowest quarters with two middle quarters of consumption and adjusted for several potential confounding factors. High maternal intake of milk products (OR 0.56, 95% CI 0.37-0.86 p = 0.002) was associated with a lower risk of CMA in offspring. When stratified according to maternal allergic rhinitis or asthma, a protective association of high use of milk products with CMA was seen in children of allergy-free mothers (OR 0.30, 95% CI 0.13 - 0.69, p < 0.001), but not in children of allergic mothers. Moreover, low maternal consumption of fish during pregnancy was associated with a higher risk of CMA in children of mothers with allergic rhinitis or asthma (OR 1.47, 95% CI 0.96 - 2.27 for the lowest quarter, p = 0.043). In children of nonallergic mothers, this association was not seen. Maternal diet during lactation was not associated with CMA in offspring, apart from an inverse association between citrus and kiwi fruit consumption and CMA. These results imply that maternal diet during pregnancy may contain factors protective against CMA in offspring, more so than maternal diet during lactation. These results need to be confirmed in other studies before giving recommendations to the public. To evaluate the degree of adherence to a therapeutic elimination diet in children with diagnosed CMA, food records of 267 children were studied. Subsequent food records were examined to assess the age at reintroduction of milk products to the child s diet. Nine of ten families adhered to the elimination diet of the child with extreme accuracy. Older and monosensitized children had more often small amounts of cow s milk protein in their diet (p < 0.001 for both). Adherence to the diet was not related to any other sociodemographic factor studied or to the age at reintroduction of milk products to the diet. Low intakes of vitamin D, calcium, and riboflavin are of concern in children following a cow s milk-free diet. In summary, we found that the questionnaires used in the DIPP study are valid in investigating CMA in young children; that there are associations between maternal diet during pregnancy and lactation and the development of CMA in offspring; and that the therapeutic elimination diet in children with diagnosed CMA is rigorously adhered to.

Impaired spermatogenesis in Finnish boars and bulls

Maintenance of breeding efficiency and high semen quality is essential for reproductive success in farm animals. Early recognition of possible inheritable factors causing infertility requires constant attention. This thesis focuses on describing different manifestations of impaired spermatogenesis, their impact on fertility and partly also their incidence in populations. The reasons for spermatogenic failure are various. An interruption of germ cell differentiation, spermatogenic arrest, can lead to infertility. The incidence of azoospermia was investigated in the 1996 2005 survey of Finnish AI and farm breeding boars. We focused on the diagnosis, testicular morphometry and the possible reasons for the condition. The incidence of azoospermia was significantly higher in Yorkshire boars than in the Landrace breed. The most common diagnosis in Yorkshire boars was germ cell arrest at the primary spermatocyte level. The second most frequent diagnosis in Yorkshire boars was segmental aplasia of the Wolffian ducts with idiopathic epididymal obstruction. Other reasons for azoospermia were infrequent. In the second study we investigated the incidence of two relatively well-defined specific sperm defects in Finnish Yorkshire and Landrace boars during the same survey, the immotile short-tail sperm (ISTS) defect and the knobbed acrosome (KA) defect. In the Finnish Yorkshire boars the inherited ISTS defect, and the probably inherited KA defect, were important causes of infertility during 1996 2005. The ISTS defect was found in 7.6% and the KA defect in 0.8% of the Yorkshire boars. No Landrace boars were diagnosed with either of these two defects. In the third study we described a new sterilizing sperm defect in an oligoasthenoterazoospermic bull. Because of its morphological characteristics this defect was termed the multinuclear-multiflagellar sperm (MNMFS) defect. The number of Sertoli cells in the seminiferous tubuli was highly increased in the MNMFS bull compared with the number in normal bulls. In the following two studies we used a combined approach of fluorescence in situ hybridization (FISH), flow cytometry and morphometric studies to provide information on the cytogenetic background of macrocephalic bull spermatozoa. We described cellular features of diploid spermatozoa and compared the failures in the first and second meiotic divisions. In the last study we describe how the transplantation of testicular cells was used to determine whether spermatogonia derived from donor animals are able to colonize and produce motile spermatozoa in immune-competent unrelated boars suffering the ISTS defect. Transplantation resulted in complete focal spermatogenesis, indicated by the appearance of motile spermatozoa and confirmed by genotyping.

Young Actors in Transnational Agoras : Multi-sited Ethnography of Cosmopolitan Micropolitical Orientations

This study examines young people s political participation in transnational meetings. Methodologically the study aims to shed light on multi-sited global ethnography. Young people are viewed here as a social age group sensitive to critical, alternative and even radical political participation. The diversity of the young actors and their actions is captured by using several different methods. What is more, the study spurs us coming from the Global North to develop social science research towards methodological cosmopolitanism and to consider our research practices from a moral cosmopolitan perspective. The research sites are the EU Presidency Youth Event (2006 Hyvinkää, Finland), the Global Young Greens Founding Conference (2007 Nairobi, Kenya), the European Social Forum (2008 Malmö, Sweden) and three World Social Forums (2006 Bamako, Mali; 2007 Nairobi Kenya and 2009 Belém, Brazil). The data consists of participant observation, documents and media articles of the meetings, interviews, photos, video, and internet data. This multidisciplinary study combines youth research, development studies, performative social science and political sociology. In this research the diverse field of youth political participation in transnational agoras is studied by using a cross-table of cosmopolitan resources (or the lack of them) and everydaymakers expert citizen dichotomy. First, the young participants of the EU Presidency youth event are studied as an example of expert citizens with cosmopolitan resources (these resources include, for example, language skills, higher education and international social network). Second, the study analyses those everyday-makers who use performative politics to demonstrate their political missions here and now. But in order to make the social movement global they need cosmopolitan resources to be able to use the social media tools and work globally. Third, the study reflects upon the difficulties of reaching those actors who lack cosmopolitan resources, either everyday-makers or expert citizens. The go-along method and the use of the interpreters are shown as ways to reach these young people s political missions. Fourth, the research underlines the importance of contact zones (i.e. spaces or situations where the aforementioned orientations and their differences temporarily disappear or weaken) for deeper democracy and for boosted dialogue between different kinds of participants. Keywords: political participation, young people, multi-sited ethnography, youth research, political sociology, development studies, performative social science

Training Young Minds for Nanoscience and Technology: Issues and Challenges

This article explores issues and challenges in the field of education in nanoscience and technology with special emphasis with respect to India, where an expanding programme of research in nano science and technology is in place. The article does not concentrate on actual curricula that are needed in nano science and technology education course. Rather it focuses on the desirability of nanoscience and technology education at different levels of education and future prospect of students venturing into this within the economic and cultural milieu of India. We argue that care is needed in developing the education programme in India. However, the risk is worth taking as the education on nanoscience and technology can bridge the man power gap not only in this area of technology but also related technologies of hardware and micro electronics for which the country is a promising destination at global level. This will also unlock the demographical advantage that India will enjoy in the next five decades.

Molecular profile of oligodendrogliomas in young patients

Several studies on molecular profiling of oligodendrogliomas (OGs) in adults have shown a distinctive genetic pattern characterized by combined deletions of chromosome arms 1 p and 19q, O6-methylguanine-methyltransferase (MGMT) methylation, and isocitrate dehydrogenase 1 (IDH1) mutation, which have potential diagnostic, prognostic, and even therapeutic relevance. OGs in pediatric and young adult patients are rare and have been poorly characterized on a molecular and biological basis, and it remains uncertain whether markers with prognostic significance in adults also have predictive value in these patients. Fourteen cases of OGs in young patients (age, <= 25 years) who received a diagnosis over 7 years were selected (7 pediatric patients age <= 18 years and 7 young adults aged 19-25 years). The cases were evaluated for 1p/19q status, MGMT promoter methylation, p53 mutation, and IDH1 mutation. None of the pediatric cases showed 1p/19q deletion. In young adults, combined 1p/19q loss was observed in 57% and isolated 1p loss in 14% of cases. The majority of cases in both subgroups (71% in each) harbored MGMT gene promoter methylation. TP53 and IDH1 mutations were not seen in any of the cases in both the groups. To our knowledge, this is the first study to show that molecular profile of OGs in pediatric and young adult patients is distinct. Further large-scale studies are required to identify additional clinically relevant genetic alterations in this group of patients.

Ultrasound modulated optical tomography: Young's modulus of the insonified region from measurement of natural frequency of vibration

We demonstrate a method to recover the Young's modulus (E) of a tissue-mimicking phantom from measurements of ultrasound modulated optical tomography (UMOT). The object is insonified by a dualbeam, confocal ultrasound transducer (US) oscillating at frequencies f(0) and f(0) + Delta f and the variation of modulation depth (M) in the autocorrelation of light traversed through the focal region of the US transducer against Delta f is measured. From the dominant peaks observed in the above variation, the natural frequencies of the insonified region associated with the vibration along the US transducer axis are deduced. A consequence of the above resonance is that the speckle fluctuation at the resonance frequency has a higher signal-to-noise to ratio (SNR). From these natural frequencies and the associated eigenspectrum of the oscillating object, Young's modulus (E) of the material in the focal region is recovered. The working of this method is confirmed by recovering E in the case of three tissue-mimicking phantoms of different elastic modulus values. (C) 2011 Optical Society of America

Minor mergers and their impact on the kinematics of old and young stellar populations in disk galaxies

By means of N-body simulations we investigate the impact of minor mergers on the angular momentum and dynamical properties of the merger remnant. Our simulations cover a range of initial orbital characteristics and gas-to-stellar mass fractions (from 0 to 20%), and include star formation and supernova feedback. We confirm and extend previous results by showing that the specific angular momentum of the stellar component always decreases independently of the orbital parameters or morphology of the satellite, and that the decrease in the rotation velocity of the primary galaxy is accompanied by a change in the anisotropy of the orbits. However, the decrease affects only the old stellar population, and not the new population formed from gas during the merging process. This means that the merging process induces an increasing difference in the rotational support of the old and young stellar components, with the old one lagging with respect to the new. Even if our models are not intended specifically to reproduce the Milky Way and its accretion history, we find that, under certain conditions, the modeled rotational lag found is compatible with that observed in the Milky Way disk, thus indicating that minor mergers can be a viable way to produce it. The lag can increase with the vertical distance from the disk midplane, but only if the satellite is accreted along a direct orbit, and in all cases the main contribution to the lag comes from stars originally in the primary disk rather than from stars in the satellite galaxy. We also discuss the possibility of creating counter-rotating stars in the remnant disk, their fraction as a function of the vertical distance from the galaxy midplane, and the cumulative effect of multiple mergers on their creation.

Relation between the work function and Young's modulus of RhSi and estimate of Schottky-barrier height at RhSi/Si interface: An ab-initio study

Density-functional calculations are performed to explore the relationship between the work function and Young's modulus of RhSi, and to estimate the p-Schottky-barrier height (SBH) at the Si/RhSi(010) interface. It is shown that the Young's modulus and the workfunction of RhSi satisfy the generic sextic relation, proposed recently for elemental metals. The calculated p-SBH at the Si/RhSi interface is found to differ only by 0.04 eV in opposite limits, viz., no-pinning and strong pinning. We find that the p-SBH is reduced as much as by 0.28 eV due to vacancies at the interface. (C) 2012 American Institute of Physics. http://dx.doi.org/10.1063/1.4761994]

STM verification of the reduction of the Young's modulus of CdS nanoparticles at smaller sizes

We demonstrate the first STM evaluation of the Young's modulus (E) of nanoparticles (NPs) of different sizes. The sample deformation induced by tip-sample interaction has been determined using current-distance (I-Z) spectroscopy. As a result of tip-sample interaction, and the induced surface deformations, the I-z curves deviates from pure exponential dependence. Normally, in order to analyze the deformation quantitatively, the tip radius must be known. We show, that this necessity is eliminated by measuring the deformation on a substrate with a known Young's modulus (Au(111)) and estimating the tip radius, and afterwards, using the same tip (with a known radius) to measure the (unknown) Young's modulus of another sample (nanoparticles of CdS). The Young's modulus values found for 3 NP's samples of average diameters of 3.7, 6 and 7.5 nm, were E similar to 73%, 78% and 88% of the bulk value, respectively. These results are in a good agreement with the theoretically predicted reduction of the Young's modulus due to the changes in hydrostatic stresses which resulted from surface tension in nanoparticles with different sizes. Our calculation using third order elastic constants gives a reduction of E which scales linearly with 1/r (r is the NP's radius). This demonstrates the applicability of scanning tunneling spectroscopy for local mechanical characterization of nanoobjects. The method does not include a direct measurement of the tip-sample force but is rather based on the study of the relative elastic response. (C) 2014 Elsevier B.V. All rights reserved.

Evaluation of the Effectiveness of Representative Methods for Determining Young's Modulus and Hardness from Instrumented Indentation Data

The effectiveness of Oliver & Pharr's (O&P's) method, Cheng & Cheng's (C&C's) method, and a new method developed by our group for estimating Young's modulus and hardness based on instrumented indentation was evaluated for the case of yield stress to reduced Young's modulus ratio (sigma(y)/E-r) >= 4.55 x 10(-4) and hardening coefficient (n) <= 0.45. Dimensional theorem and finite element simulations were applied to produce reference results for this purpose. Both O&P's and C&C's methods overestimated the Young's modulus under some conditions, whereas the error can be controlled within +/- 16% if the formulation was modified with appropriate correction functions. Similar modification was not introduced to our method for determining Young's modulus, while the maximum error of results was around +/- 13%. The errors of hardness values obtained from all the three methods could be even larger and were irreducible with any correction scheme. It is therefore suggested that when hardness values of different materials are concerned, relative comparison of the data obtained from a single standard measurement technique would be more practically useful. It is noted that the ranges of error derived from the analysis could be different if different ranges of material parameters sigma(y)/E-r and n are considered.

An Improved Energy Method For Determining Young'S Modulus By Instrumented Indentation Using A Berkovich Tip

We previously proposed a method for estimating Young's modulus from instrumented nanoindentation data based on a model assuming that the indenter had a spherical-capped Berkovich geometry to take account of the bluntness effect. The method is now further improved by releasing the constraint on the tip shape, allowing it to have a much broader arbitrariness to range from a conical-tipped shape to a flat-ended shape, whereas the spherical-capped shape is just a special case in between. This method requires two parameters to specify a tip geometry, namely, a volume bluntness ratio V-r and a height bluntness ratio h(r). A set of functional relationships correlating nominal hardness/reduced elastic modulus ratio (H-n/E-r) and elastic work/total work ratio (W-e/W) were established based on dimensional analysis and finite element simulations, with each relationship specified by a set of V-r and h(r). Young's modulus of an indented material can be estimated from these relationships. The method was shown to be valid when applied to S45C carbon steel and 6061 aluminum alloy.

Nanoindentation of thin-film-substrate system: Determination of film hardness and Young's modulus

In the present paper, the hardness and Young's modulus of film-substrate systems are determined by means of nanoindentation experiments and modified models. Aluminum film and two kinds of substrates; i.e. glass and silicon, are studied. Nanoindentation XP II and continuous stiffness mode are used during the experiments. In order to avoid the influence of the Oliver and Pharr method used in the experiments, the experiment data are analyzed with the constant Young's modulus assumption and the equal hardness assumption. The volume fraction model (CZ model) proposed by Fabes et al. (1992) is used and modified to analyze the measured hardness. The method proposed by Doerner and Nix (DN formula) (1986) is modified to analyze the measured Young's modulus. Two kinds of modified empirical formula are used to predict the present experiment results and those in the literature, which include the results of two kinds of systems, i.e., a soft film on a hard substrate and a hard film on a soft substrate. In the modified CZ model, the indentation influence angle, phi, is considered as a relevant physical parameter, which embodies the effects of the indenter tip radius, pile-up or sink-in phenomena and deformation of film and substrate.

关于Young-Laplace公式的吉布斯自由能证明

对于为论证球形液滴附加压强的Young-Laplace公式而设计的一个理想实验,有文献试图借助吉布斯自由能函数进行证明,本文给出符合这一条件的证明方法.