Nutrient deficiencies in greater yam and their effects on leaf nutrient concentrations

This paper describes the first systematic study of nutritional deficiencies of greater yam (Dioscorea alata). Yam plants (cv. 'Mahoa'a') were propagated from tuber discs and grown in nutrient solution, with nutrients supplied following a modified programmed nutrient-addition method. After an establishment period of four weeks, deficiencies of nitrogen (N), phosphorus (P), potassium (K), calcium (Ca), magnesium (Mg), sulfur (S), iron (Fe), boron (B), manganese (Mn), copper (Cu), zinc (Zn), and molybdenum (Mo) were induced by omitting the relevant nutrient from the solution. Foliar symptoms were recorded photographically. Notably, deficiencies of the mobile macronutrients failed to induce senescence of oldest leaves, while vine growth and younger leaves were affected. Leaf blades of the main stem were sampled in sequence and analyzed chemically, providing the distribution of each nutrient from youngest to oldest leaves in both adequately supplied and deficient plants. The nutrient-concentration profiles, together with the visible symptoms, indicated that little remobilization of mobile macronutrients had occurred. For both macro- and micronutrients, young leaves gave the best separation of nutrient concentrations between well-nourished and deficient plants.

The credentialing of counselling in Australia

Counselling is an unregulated activity in Australia. No statutory regulation currently exists. As a result, different counselling organizations are promoting different voluntary standards for the practice of counselling. This has led to a credentialing dilemma in which counsellors and the public are confronted with a number of counselling qualification choices. This dilemma poses a number of questions: Should counselling become more regulated in Australia? At what level should counselling be regulated? Should there be various levels of counsellor regulation? This article provides an overview of the credentialing dilemma facing counselling in Australia, compares and contrasts two main Australian accreditation efforts, and proposes cooperation as a way of navigating said dilemma. The implications for counselling as a profession are discussed along with suggestions for its development as a profession. This includes a discussion regarding the relative advantages and disadvantages of greater regulation of counselling as a professional activity in Australia. Specifically, what is and is not generally considered a profession is reviewed, different forms of credentialing are outlined, and general arguments for and against accreditation efforts are presented. The efforts of the Australian Counselling Association (ACA) and the Psychotherapy and Counselling Federation of Australia (PACFA) are compared and are shown to have common ground. Consequently, ways in which the main counselling organizations may best work in conjunction to promote counselling as a profession in Australia are proposed. These suggestions include good communication, collaboration, and the avoidance of turf wars. Specifically, that the ACA and PACFA collaborate on developing a combined independent registration list that is supported by both organizations or, minimally, that both organizations have mutual recognition on each other's register lists.

Systematic inflammatory responses to maximal versus submaximal lengthening contractions of the elbow flexors

We compared changes in markers of muscle damage and systemic inflammation after submaximal and maximal lengthening muscle contractions of the elbow flexors. Using a cross-over design, 10 healthy young men not involved in resistance training completed a submaximal trial (10 sets of 60 lengthening contractions at 10% maximum isometric strength, 1 min rest between sets), followed by a maximal trial (10 sets of three lengthening contractions at 100% maximum isometric strength, 3 min rest between sets). Lengthening contractions were performed on an isokinetic dynamometer. Opposite arms were used for the submaximal and maximal trials, and the trials were separated by a minimum of two weeks. Blood was sampled before, immediately after, 1 h, 3 h, and 1-4 d after each trial. Total leukocyte and neutrophil numbers, and the serum concentration of soluble tumor necrosis factor-alpha receptor 1 were elevated after both trials (P < 0.01), but there were no differences between the trials. Serum IL-6 concentration was elevated 3 h after the submaximal contractions (P < 0.01). The concentrations of serum tumor necrosis factor-alpha, IL-1 receptor antagonist, IL-10, granulocyte-colony stimulating factor and plasma C-reactive protein remained unchanged following both trials. Maximum isometric strength and range of motion decreased significantly (P < 0.001) after both trials, and were lower from 1-4 days after the maximal contractions compared to the submaximal contractions. Plasma myoglobin concentration and creatine kinase activity, muscle soreness and upper arm circumference all increased after both trials (P < 0.01), but were not significantly different between the trials. Therefore, there were no differences in markers of systemic inflammation, despite evidence of greater muscle damage following maximal versus submaximal lengthening contractions of the elbow flexors.

Particle number emissions and source signatures of an industrial facility

The work presented was conducted within the scope of a larger study investigating impacts of the Stuart Oil Shale project, a facility operating to the north of the industrial city of Gladstone, Australia. The aims of the investigations were threefold: (a) the identification of the plant signatures in terms of particle size distributions in the submicrometer range (13-830 nm) through stack measurements, (b) exploring the applicability of these signatures in tracing the source contributions at locations of interest, at a distance from the plant, and (c) assessing the contribution of the plant to the total particle number concentration at locations of interest. The stack measurements conducted for three different conditions of plant operation showed that the particle size distributions were bimodal with average modal count median diameters (CMDs) of 24 (SD 4) and 52 (SD 9) nm. The average of all the particle size distributions recorded within the plant sector at a site located 4.5 km from the plant, over the sampling period when the plant was operating, also showed a bimodal distribution. The modal CMDs in this case were 27 and 50 nm, similar to those at the stack. This bimodal size distribution is distinct from the size distribution of the most common ambient anthropogenic emission source, which is vehicle emissions, and can be considered as a signature of this source. The average contribution of the plant (for plant sector winds) was estimated to be (10.0 +/- 3.8) x 10(2) particles cm(-3) and constituted approximately a 50% increase over the local particle ambient concentration for plant sector winds. This increase in particle number concentration compared to the local background concentration, while high compared to the clean environment concentration, is not significant when compared to concentrations generally encountered in the urban environment of Brisbane.

Effect of the average soft-segment length on the morphology and properties of segmented polyurethane nanocomposites

Two organically modified layered silicates (with small and large diameters) were incorporated into three segmented polyurethanes with various degrees of microphase separation. Microphase separation increased with the molecular weight of the poly(hexamethylene oxide) soft segment. The molecular weight of the soft segment did not influence the amount of polyurethane intercalating the interlayer spacing. Small-angle neutron scattering and differential scanning calorimetry data indicated that the layered silicates did not affect the microphase morphology of any host polymer, regardless of the particle diameter. The stiffness enhancement on filler addition increased as the microphase separation of the polyurethane decreased, presumably because a greater number of urethane linkages were available to interact with the filler. For comparison, the small nanofiller was introduced into a polyurethane with a poly(tetramethylene oxide) soft segment, and a significant increase in the tensile strength and a sharper upturn in the stress-strain curve resulted. No such improvement occurred in the host polymers with poly(hexamethylene oxide) soft segments. It is proposed that the nanocomposite containing the more hydrophilic and mobile poly(tetramethylene oxide) soft segment is capable of greater secondary bonding between the polyurethane chains and the organosilicate surface, resulting in improved stress transfer to the filler and reduced molecular slippage. (c) 2006 Wiley Periodicals, Inc.

The effects of temperature and salinity on Acacia harpophylla (brigalow) (Mimosaceae) germination

Acacia harpophylla F. Muell. (brigalow) used to naturally occur over a range of about 50 000 km(2) in Queensland and New South Wales, Australia. Large scale clearing for agriculture has reduced the area to less than 20 000 km(2) and it is estimated that 20-25% of vertebrate fauna living in brigalow communities will become locally extinct as a result of the current clearing induced loss of habitat. Some coal mining companies in central Queensland have become interested in providing habitat for the endangered bridle nail-tailed wallaby that lives in brigalow vegetation. However, there is little known about establishment techniques for brigalow on mine sites and other disturbed ground; an understanding of brigalow biology and ecology is required to assist in the conservation of this threatened vegetation community and for re-creation of bridled nail-tail wallaby habitat in the post mining landscape. Brigalow is an unusual species of Acacia because it is not hard-seeded and germinates readily without the need to break seed-coat imposed dormancy. Germination trials were undertaken to test the ability of brigalow seed to germinate with a range of temperatures and salinity levels similar to those experienced in coal mine spoil. Optimum germination was found to occur at temperatures from 15 to 38 degrees C and no germination was recorded at 45 degrees C. Brigalow was very tolerant of high salt levels and germinated at percentages greater than 50% up to the highest salinity tested, 30 dS/m. Germination of greater than 90% occurred up to an electrical conductivity of 20 dS/m. The results indicate brigalow seed can be sown in summer when rains are most likely to occur, however, shading of the seed with extra soil or mulch may ensure the ground surface does not become too hot for germination. Because of its ability to germinate at high salinity levels, brigalow may be suitable for use in saline mine wastes which are common on sites to be rehabilitated after mining.

Understanding city fringe gentrification: The role of a potential investment gap

Discussion of gentrification has become ‘balkanised’ into a series of competing and intensely-held positions. The dichotomies are between economic and cultural explanations, supply-side and demand-side explanations and structural Marxist and liberal humanist views. Despite the long academic and policy interest in gentrification there is still no clear definition of what it is and why it occurs. However, almost all previous analyses see gentrification as an inner-city phenomenon and so deal with it within framework of inner-city theory and causation. This paper approaches the debate from a somewhat different position. It argues that gentrification, seen as the replacement of lower status and income households by higher status and income households, can occur outside the inner city. It uses clear cases of gentrification on the urban fringe of metropolitan Brisbane in South East Queensland, to explore mechanisms and explanations. The key to this ‘gentrification by the sea’ is a ‘potential investment gap’ between current and potential future property values, based on increasing demand for a limited locational resource – but instead of this being inner-city properties it is waterside land in a regional facing rapid population increase. The paper also draws attention to the inadequate recognition of the roles of the state and the media in previous analyses of gentrification.

Comparison of ASAS improvement criteria for ankylosing spondylitis with clinically relevant improvement according to an expert panel

Objective: To investigate whether the recently developed (statistically derived) "ASsessment in Ankylosing Spondylitis Working Group" improvement criteria (ASAS-IC) for ankylosing spondylitis (AS) reflect clinically relevant improvement according to the opinion of an expert panel. Methods: The ASAS-IC consist of four domains: physical function, spinal pain, patient global assessment, and inflammation. Scores on these four domains of 55 patients with AS, who had participated in a non-steroidal anti-inflammatory drug efficacy trial, were presented to an international expert panel (consisting of patients with AS and members of the ASAS Working Group) in a three round Delphi exercise. The number of (non-) responders according to the ASAS-IC was compared with the final-consensus of the experts. The most important domains in the opinion of the experts were identified, and also selected with discriminant analysis. A number of provisional criteria sets that best represented the consensus of the experts were defined. Using other datasets, these clinically derived criteria sets as well as the statistically derived ASAS-IC were then tested for discriminative properties and for agreement with the end of trial efficacy by patient and doctor. Results: Forty experts completed the three Delphi rounds. The experts considered twice as many patients to be responders than the ASAS-IC (42 v 21). Overall agreement between experts and ASAS-IC was 62%. Spinal pain was considered the most important domain by most experts and was also selected as such by discriminant analysis. Provisional criteria sets with an agreement of greater than or equal to 80% compared with the consensus of the experts showed high placebo response rates (27-42%), in contrast with the ASAS-IC with a predefined placebo response rate of 25%. All criteria sets and the ASAS-IC discriminated well between active and placebo treatment (chi(2) = 36-45; p < 0.001). Compared with the end of trial efficacy assessment, the provisional criteria sets showed an agreement of 71-82%, sensitivity of 67-83%, and specificity of 81-88%. The ASAS-IC showed an agreement of 70%, sensitivity of 62%, and specificity of 89%. Conclusion: The ASAS-IC are strict in defining response, are highly specific, and consequently show lower sensitivity than the clinically derived criteria sets. However, those patients who are considered as responders by applying the ASAS-IC are acknowledged as such by the expert panel as well as by. patients' and doctors' judgments, and are therefore likely to be true responders.

The political control of orthodoxy in the construction of the Romanian State, 1859-1918

This article analyses the relationship between Orthodoxy and state from the unification of the Principalities of Moldavia and Wallachia in 1859 to the creation of Greater Romania in 1918. Examining the attitudes of political leaders towards the dominant religion, this article argues that during the reigns of Prince Cuza and King Carol I the Church became a state institution closely connected to the development of political regimes. It is suggested that by claiming doctrinal religious connections with Constantinople and independence from foreign intervention in the Church’s affairs, religious and political leaders from 1859 to 1918 amplified the construction of Romanian national mythology which contributed towards the political unity of the state.

Reliability, normative data, and the effect of age-related macular disease on the Eger Macular Stressometer photostress recovery time

Purpose: To assess repeatability and reproducibility, to determine normative data, and to investigate the effect of age-related macular disease, compared with normals, on photostress recovery time measured using the Eger Macular Stressometer (EMS). Method: The study population comprised 49 healthy eyes of 49 participants. Four EMS measurements were taken in two sessions separated by 1 h by two practitioners, with reversal of order in the second session. EMS readings were also taken from 17 age-related maculopathy (ARM), and 12 age-related macular degeneration (AMD), affected eyes. Results: EMS readings are repeatable to within ± 7 s. There is a statistically significant difference between controls and ARM affected eyes (t = 2.169, p = 0.045), and AMD affected eyes (t = 2.817, p = 0.016). The EMS is highly specific, and demonstrates sensitivity of 29% for ARM, and 50% for AMD. Conclusions: The EMS may be a useful screening test for ARM, however, direct illumination of the macula of greater intensity and longer duration may yield less variable results. © 2004 The College of Optometrists.

Rekindling community spirit and identity:the role of ecoprotestors

One of the features of current society is that of protest against environmental issues and this paper considers protest against road building and the ecoprotest movement. In doing so it considers both the local inhabitants and new age travellers who are involved in such protest to show that not only does ecoprotest, as a form of protest, raise the profile of environmental issues within public discourse but also opens up space for such discourse. Of greater significance is the effect which the ecoprotest, movement has upon a local sense of identity and community. Indeed the travellers themselves, through their action and engagement, demonstrate that the key determinant of community identity is grounded in self-belief and shared aspirations rather than in an externally imposed definition or in any economic imperatives. This paper shows that the migration of this sense of self-belief into mainstream society serves to demonstrate that community spirit and identity are extant in modern society but need a catalyst for their re-emergence. In doing so the role of ecoprotest points towards a possible mechanism for the re-emergence of an active and participatory sense of community identity within society as a whole.

The production of the enzyme dextransucrase by batch and continuous fermentation techniques

A review of the literature of work carried out on dextransucrase production, purification, immobilization and reactions has been carried out. A brief review has also been made of the literature concerning general enzyme biotechnology and fermentation technology. Fed-batch fermentation of the bacteria Leuconostoc mesenteroides NRRL B512 (F) to produce dextransucrase has formed the major part of this research. Aerobic and anaerobic fermentations have been studied using a 16 litre New Brunswick fermenter which has a 3-12 litre working volume. The initial volume of broth used in the studies was 6 litres. The results of the fed-batch fermentations showed for the first time that yields of dextransucrase are much higher under the anaerobic conditions than during the aerobic fermentations. Dextransucrase containing 300-350 DSU/cm3 of enzyme activity has been obtained during the aerobic fermentations, while in the anaerobic fermentations, enzyme yields containing 450-500 DSU/cm3 have been obtained routinely. The type of yeast extract used in the fermentation medium has been found to have significant effects on enzyme yield. Of the different types studied, the Gistex Standard was found to be the type that favoured the highest enzyme production. Studies have also been carried out on the effect of agitation rate and antifoam on the enzyme production during the anaerobic experiments. Agitation rates of up to 600 rpm were found not to affect the enzyme yield, however, the presence of antifoam in the medium led to a significant reduction in enzyme activity (less than 300 DSU/cm3). Scale-up of the anaerobic fermentations has been performed at up to the 1000 litre level with enzyme yields containing more than 400 DSU/cm3 of activity being produced. Some of the enzyme produced at this scale was used for the first time to produce dextran on an industrial scale via the enzyme route, with up to 99% conversion of sucrose to dextran being obtained. An attempt has been made at continuous dextransucrase production. Cell washout was observed to occur at dilution rates of greater than 0.4 h-1. Dextransucrase containing up to 25 DSU/cm3/h has been produced continuously.

The temperature dependence of the electro-optic kerr effect in solutions

A novel Kerr cell of greater optical path length and temperature stability has been designed and built. The Kerr effect experimental has been substantially automated using an Apple IIe computer. Software has been written allowing the computer to partially control the Kerr effect equipment and to acquire and analyse the relevant data.The temperature dependent electro-optic Kerr effect of 2-methyl-4-nitroaniline, p-nitroaniline, nitrobenzene, aniline, and toluene as solutions in 1, 4-dioxane has been studied. The Kerr effect measurements combined with dipole moment, depolarisation ratio, dielectric, and electronic polarisation measurements have been used to calculate the first hyperpolarisability of the solute.Although first hyperpolarisabilities for the compounds studied have been measured in various physical states using a variety of experimental techniques, it is gratifying to find that the values presented in this thesis have a linear relationship with values reported by other workers.

Entry modes and performance of foreign direct investment in China

How does a firm choose a proper model of foreign direct investment (FDI) for entering a foreign market? Which mode of entry performs better? What are the performance implications of joint venture (JV) ownership structure? These important questions face a multinational enterprise (MNE) that decides to enter a foreign market. However, few studies have been conducted on such issues, and no consistent or conclusive findings are generated, especially with respect to China. It’s composed of five chapters, providing corresponding answers to the questions given above. Specifically, Chapter One is an overall introductory chapter. Chapter Two is about the choice of entry mode of FDI in China. Chapter Three examines the relationship between four main entry modes and performance. Chapter Four explores the performance implications of JV ownership structure. Chapter Five is an overall concluding chapter. These empirical studies are based on the most recent and richest data that has never been explored in previous studies. It contains information on 11,765 foreign-invested enterprises in China in seven manufacturing industries in 2000, 10,757 in 1999, and 10,666 in 1998. The four FDI entry modes examined include wholly-owned enterprises (WOEs), equity joint ventures (EJVs), contractual joint ventures (CJVs), and joint stock companies (JSCs). In Chapter Two, a multinominal logit model is established, and techniques of multiple linear regression analysis are employed in Chapter Three and Four. It was found that MNEs, under the conditions of a good investment environment, large capital commitment and small cultural distance, prefer the WOE strategy. If these conditions are not met, the EJV mode would be of greater use. The relative propensity to pursue the CJV mode increases with a good investment environment, small capital commitment, and small cultural distance. JSCs are not favoured by MNEs when the investment environment improves and when affiliates are located in the coastal areas. MNEs have been found to have a greater preference for an EJV as a mode of entry into the Chinese market in all industries. It is also found that in terms of return on assets (ROA) and asset turnover, WOEs perform the best, followed by EJVs, CJVs, and JSCs. Finally, minority-owned EJVs or JSCs are found to outperform their majority-owned counterparts in terms of ROA and asset turnover.

Multinational Performance and the Geography of FDI:evidence from 46 countries

The literature on multinationality and firm performance has generally disregarded the role of geography. However, the location of FDI assumes particular importance in terms of the link between multinationality at the firm level. The purpose of this paper is to consider the multinationality-performance relationship within the context of greater emphasis on the importance of location, but also emphasising the importance of the location decision. This paper draws on firm-level data covering over 16,000 multinationals from 46 countries over the period of 1997-2007 and allows for different effects upon the performance of the multinational firm depending on the level of development of the host economy. In our results, we find a clear positive relation between multinationality and firm performance. However, investment in developing countries is associated with larger effects on performance than in the case of investment in developed countries. We also find that the return to investing in developing countries is U-shaped. This indicates that multinationals are likely to face losses in the early stage of their investment in developing countries before the positive returns are realized. Overall, our results suggest that the net gains for multinationals from greater geographical diversification have not yet been fully explored. Geographical diversification into developing countries may be an important source of competitive advantages that deserves more serious consideration from business leaders and academics alike. © 2013 Springer-Verlag Berlin Heidelberg.