946 resultados para Trade in Services Agreement
Resumo:
Information and communication technologies are the tools that underpin the emerging “Knowledge Society”. Exchange of information or knowledge between people and through networks of people has always taken place. But the ICT has radically changed the magnitude of this exchange, and thus factors such as timeliness of information and information dissemination patterns have become more important than ever.Since information and knowledge are so vital for the all round human development, libraries and institutions that manage these resources are indeed invaluable. So, the Library and Information Centres have a key role in the acquisition, processing, preservation and dissemination of information and knowledge. ln the modern context, library is providing service based on different types of documents such as manuscripts, printed, digital, etc. At the same time, acquisition, access, process, service etc. of these resources have become complicated now than ever before. The lCT made instrumental to extend libraries beyond the physical walls of a building and providing assistance in navigating and analyzing tremendous amounts of knowledge with a variety of digital tools. Thus, modern libraries are increasingly being re-defined as places to get unrestricted access to information in many formats and from many sources.The research was conducted in the university libraries in Kerala State, India. lt was identified that even though the information resources are flooding world over and several technologies have emerged to manage the situation for providing effective services to its clientele, most of the university libraries in Kerala were unable to exploit these technologies at maximum level. Though the libraries have automated many of their functions, wide gap prevails between the possible services and provided services. There are many good examples world over in the application of lCTs in libraries for the maximization of services and many such libraries have adopted the principles of reengineering and re-defining as a management strategy. Hence this study was targeted to look into how effectively adopted the modern lCTs in our libraries for maximizing the efficiency of operations and services and whether the principles of re-engineering and- redefining can be applied towards this.Data‘ was collected from library users, viz; student as well as faculty users; library ,professionals and university librarians, using structured questionnaires. This has been .supplemented by-observation of working of the libraries, discussions and interviews with the different types of users and staff, review of literature, etc. Personal observation of the organization set up, management practices, functions, facilities, resources, utilization of information resources and facilities by the users, etc. of the university libraries in Kerala have been made. Statistical techniques like percentage, mean, weighted mean, standard deviation, correlation, trend analysis, etc. have been used to analyse data.All the libraries could exploit only a very few possibilities of modern lCTs and hence they could not achieve effective Universal Bibliographic Control and desired efficiency and effectiveness in services. Because of this, the users as well as professionals are dissatisfied. Functional effectiveness in acquisition, access and process of information resources in various formats, development and maintenance of OPAC and WebOPAC, digital document delivery to remote users, Web based clearing of library counter services and resources, development of full-text databases, digital libraries and institutional repositories, consortia based operations for e-journals and databases, user education and information literacy, professional development with stress on lCTs, network administration and website maintenance, marketing of information, etc. are major areas need special attention to improve the situation. Finance, knowledge level on ICTs among library staff, professional dynamism and leadership, vision and support of the administrators and policy makers, prevailing educational set up and social environment in the state, etc. are some of the major hurdles in reaping the maximum possibilities of lCTs by the university libraries in Kerala. The principles of Business Process Re-engineering are found suitable to effectively apply to re-structure and redefine the operations and service system of the libraries. Most of the conventional departments or divisions prevailing in the university libraries were functioning as watertight compartments and their existing management system was more rigid to adopt the principles of change management. Hence, a thorough re-structuring of the divisions was indicated. Consortia based activities and pooling and sharing of information resources was advocated to meet the varied needs of the users in the main campuses and off campuses of the universities, affiliated colleges and remote stations. A uniform staff policy similar to that prevailing in CSIR, DRDO, ISRO, etc. has been proposed by the study not only in the university libraries in kerala but for the entire country.Restructuring of Lis education,integrated and Planned development of school,college,research and public library systems,etc.were also justified for reaping maximum benefits of the modern ICTs.
Resumo:
Wind energy has emerged as a major sustainable source of energy.The efficiency of wind power generation by wind mills has improved a lot during the last three decades.There is still further scope for maximising the conversion of wind energy into mechanical energy.In this context,the wind turbine rotor dynamics has great significance.The present work aims at a comprehensive study of the Horizontal Axis Wind Turbine (HAWT) aerodynamics by numerically solving the fluid dynamic equations with the help of a finite-volume Navier-Stokes CFD solver.As a more general goal,the study aims at providing the capabilities of modern numerical techniques for the complex fluid dynamic problems of HAWT.The main purpose is hence to maximize the physics of power extraction by wind turbines.This research demonstrates the potential of an incompressible Navier-Stokes CFD method for the aerodynamic power performance analysis of horizontal axis wind turbine.The National Renewable Energy Laboratory USA-NREL (Technical Report NREL/Cp-500-28589) had carried out an experimental work aimed at the real time performance prediction of horizontal axis wind turbine.In addition to a comparison between the results reported by NREL made and CFD simulations,comparisons are made for the local flow angle at several stations ahead of the wind turbine blades.The comparison has shown that fairly good predictions can be made for pressure distribution and torque.Subsequently, the wind-field effects on the blade aerodynamics,as well as the blade/tower interaction,were investigated.The selected case corresponded to a 12.5 m/s up-wind HAWT at zero degree of yaw angle and a rotational speed of 25 rpm.The results obtained suggest that the present can cope well with the flows encountered around wind turbines.The areodynamic performance of the turbine and the flow details near and off the turbine blades and tower can be analysed using theses results.The aerodynamic performance of airfoils differs from one another.The performance mainly depends on co-efficient of performnace,co-efficient of lift,co-efficient of drag, velocity of fluid and angle of attack.This study shows that the velocity is not constant for all angles of attack of different airfoils.The performance parameters are calculated analytically and are compared with the standardized performance tests.For different angles of ,the velocity stall is determined for the better performance of a system with respect to velocity.The research addresses the effect of surface roughness factor on the blade surface at various sections.The numerical results were found to be in agreement with the experimental data.A relative advantage of the theoretical aerofoil design method is that it allows many different concepts to be explored economically.Such efforts are generally impractical in wind tunnels because of time and money constraints.Thus, the need for a theoretical aerofoil design method is threefold:first for the design of aerofoil that fall outside the range of applicability of existing calalogs:second,for the design of aerofoil that more exactly match the requirements of the intended application:and third,for the economic exploration of many aerofoil concepts.From the results obtained for the different aerofoils,the velocity is not constant for all angles of attack.The results obtained for the aerofoil mainly depend on angle of attack and velocity.The vortex generator technique was meticulously studies with the formulation of the specification for the right angle shaped vortex generators-VG.The results were validated in accordance with the primary analysis phase.The results were found to be in good agreement with the power curve.The introduction of correct size VGs at appropriate locations over the blades of the selected HAWT was found to increase the power generation by about 4%
Resumo:
We present a theoretical investigation of shot-noise properties in nondegenerate elastic diffusive conductors. Both Monte Carlo simulations and analytical approaches are used. Two interesting phenomena are found: (i) the display of enhanced shot noise for given energy dependences of the scattering time, and (ii) the recovery of full shot noise for asymptotic high applied bias. The first phenomenon is associated with the onset of negative differential conductivity in energy space that drives the system towards a dynamical electrical instability in excellent agreement with analytical predictions. The enhancement is found to be strongly amplified when the dimensionality in momentum space is lowered from three to two dimensions. The second phenomenon is due to the suppression of the effects of long-range Coulomb correlations that takes place when the transit time becomes the shortest time scale in the system, and is common to both elastic and inelastic nondegenerate diffusive conductors. These phenomena shed different light in the understanding of the anomalous behavior of shot noise in mesoscopic conductors, which is a signature of correlations among different current pulses.
Resumo:
The difficulties arising in the calculation of the nuclear curvature energy are analyzed in detail, especially with reference to relativistic models. It is underlined that the implicit dependence on curvature of the quantal wave functions is directly accessible only in a semiclassical framework. It is shown that also in the relativistic models quantal and semiclassical calculations of the curvature energy are in good agreement.
Resumo:
During last decades there has been a continuous growth of aquaculture industries all over the world and taking into consideration the spurt in freshwater ornamental fish aquaculture and trade in Kerala, the present study was aimed to assess the prevalence of various motile Aeromonas spp. in fresh water ornamental fishes and associated carriage water. The extracellular virulence factors and the antibiogram of the isolates were also elucidated. Various species of motile aeromonads such as Aeromonas caviae, A. hydrophila, A. jandaei, A. schubertii, A. sobria, A. trota and A. veronii were detected. Aeromonas sobria predominated both fish and water samples. Extracellular enzymes and toxins produced by motile aeromonds are important elements of bacterial virulence. The production of extracellular virulence factors - proteases, lipase, DNase and haemolysin by the isolates were studied. All the isolates from both fish and water samples produced gelatinase and nuclease but the ability to produce lipase, caseinase and haemolysins was found to vary among isolates from different sources. Among the 15 antibiotics to which the isolates were tested, all the isolates were found to be sensitive to chloramphenicol, ciprofloxacin and gentamicin and resistant to amoxycillin. Local aquarists maintain the fish in crowded stressful conditions, which could trigger infections by the obligate/ opportunistic pathogenic members among motile aeromonads
Resumo:
The technique of reinforcing soil for foundation improvement is well established. This paper addresses the aspect of settlement of reinforced sand foundations, where the major part of the existing work deals with the aspect of bearing capacity. A detailed analysis is made paying individual attention to soil, reinforcement, and the interface between the two. A three-dimensional, nonlinear finite-element analysis is presented that uses a three-dimensional, nonlinear soil-reinforcement interface friction element, along with other threedimensional elements to model the system. The results of the analysis are compared with those from tests conducted in the laboratory and are found to be in good agreement. The studies lead to a better understanding of the behavior of the system at different stages of loading
Resumo:
Den Schwerpunkt dieser Dissertation bildet zum einen die Entwicklung eines theoretischen Modells zur Beschreibung des Strukturbildungsprozesses in organisch/anorganischen Doppelschichtsystemen und zum anderen die Untersuchung der Übertragbarkeit dieser theoretisch gewonnenen Ergebnisse auf reale Systeme. Hierzu dienen systematische experimentelle Untersuchungen dieses Phänomens an einem Testsystem. Der Bereich der selbstorganisierenden Systeme ist von hohem wissenschaftlichen Interesse, erlaubt er doch die Realisierung von Strukturen, die nicht den Begrenzungen heutiger Techniken unterliegen, wie etwa der Beugung bei lithographischen Verfahren. Darüber hinaus liefert ein vertieftes Verständnis des Strukturbildungsprozesses auch eine Möglichkeit, im Falle entsprechender technischer Anwendungen Instabilitäten innerhalb der Schichtsysteme zu verhindern und somit einer Degradation der Bauteile entgegenzuwirken. Im theoretischen Teil der Arbeit konnte ein Modell im Rahmen der klassischen Elastizitätstheorie entwickelt werden, mit dessen Hilfe sich die Entstehung der Strukturen in Doppelschichtsystemen verstehen läßt. Der hier gefundene funktionale Zusammenhang zwischen der Periode der Strukturen und dem Verhältnis der Schichtdicken von organischer und anorganischer Schicht, wird durch die experimentellen Ergebnisse sehr gut bestätigt. Die Ergebnisse zeigen, daß es technologisch möglich ist, über die Vorgabe der Schichtdicke in einem Materialsystem die Periodizität der entstehenden Strukturen vorzugeben. Darüber hinaus liefert das vorgestellte Modell eine Stabilitätsbedingung für die Schichtsysteme, die es ermöglicht, zu jedem Zeitpunkt die dominierende Mode zu identifizieren. Ein Schwerpunkt der experimentellen Untersuchungen dieser Arbeit liegt auf der Strukturbildung innerhalb der Schichtsysteme. Das Testsystem wurde durch Aufbringen einer organischen Schicht - eines sog. Molekularen Glases - auf ein Glassubstrat realisiert, als Deckschicht diente eine Siliziumnitrid-Schicht. Es wurden Proben mit variierenden Schichtdicken kontrolliert erwärmt. Sobald die Temperatur des Schichtsystems in der Größenordnung der Glasübergangstemperatur des jeweiligen organischen Materials lag, fand spontan eine Strukturbildung auf Grund einer Spannungsrelaxation statt. Es ließen sich durch die Wahl einer entsprechenden Heizquelle unterschiedliche Strukturen realisieren. Bei Verwendung eines gepulsten Lasers, also einer kreisförmigen Wärmequelle, ordneten sich die Strukturen konzentrisch an, wohingegen sich ihre Ausrichtung bei Verwendung einer flächenhaften Heizplatte statistisch verteilte. Auffällig bei allen Strukturen war eine starke Modulation der Oberfläche. Ferner konnte in der Arbeit gezeigt werden, daß sich durch eine gezielte Veränderung der Spannungsverteilung innerhalb der Schichtsysteme die Ausrichtung der Strukturen (gezielt) manipulieren ließen. Unabhängig davon erlaubte die Variation der Schichtdicken die Realisierung von Strukturen mit einer Periodizität im Bereich von einigen µm bis hinunter zu etwa 200 nm. Die Kontrolle über die Ausrichtung und die Periodizität ist Grundvoraussetzung für eine zukünftige technologische Nutzung des Effektes zur kontrollierten Herstellung von Mikro- bzw. Nanostrukturen. Darüber hinaus konnte ein zunächst von der Strukturbildung unabhängiges Konzept eines aktiven Sensors für die optische Raster-Nahfeld-Mikroskopie vorgestellt werden, das das oben beschriebene System, bestehend aus einem fluoreszierenden Molekularen Glas und einer Siliziumnitrid-Deckschicht, verwendet. Erste theoretische und experimentelle Ergebnisse zeigen das technologische Potential dieses Sensortyps.
Resumo:
Energies of muonic X-rays of the K-series of carbon, nitrogen and oxygen have been measured with an accuracy of about 15 eV. Root mean square radii of the nuclear charge distributions were deduced. The results 2.49±0.05 fm for carbon, 2.55 ±0.03 fm for nitrogen and 2.71 ±0.02 fm for oxygen are in good agreement at comparable accuracy with recent electron scattering data.
Resumo:
The ground state (J = 0) electronic correlation energy of the 4-electron Be-sequence is calculated in the Multi-Configuration Dirac-Fock approximation for Z = 4-20. The 4 electrons were distributed over the configurations arising from the 1s, 2s, 2p, 3s, 3p and 3d orbitals. Theoretical values obtained here are in good agreement with experimental correlation energies.
Resumo:
The time dependent Dirac equation which describes a heavy ion-atom collision system is solved via a set of coupled channel equations with energy eigenvalues and matrix elements which are given by a selfconsistent field many electron calculation. After a brief discussion of the theoretical approximations and the connection of the many particle with the one particle interpretation we discuss first results for the systems F{^8+} - Ne and F{^6+} - Ne. The resulting P(b) curves for the creation of a Ne K-hole are in good agreement with the experimental results.
Resumo:
The rotary valve is a widely used mechanical device in many solids-handling industrial processes. However, it may also be responsible for most of the attrition effects occurring in a typical process. In this study, the attrition effects occurring in a rotary valve operating as a stand-alone device and as part of a pneumatic conveying system were investigated. In the former case granular attrition was carried out at three different rotary valve speeds and the experimental results obtained were found to be in good agreement with the Gwyn correlation. In the latter case three typical air flow rates were used in the pneumatic conveying system. The size distribution of the attrition product obtained at the lowest air flow rate used was not adequately described by the Gwyn correlation. The attrition process and mechanisms involved were analysed and the minimum size of the attrition product obtained from both modes of operations was found to be similar.
Resumo:
El presente escrito, constituye una aproximación a los procesos de privatización del agua en América Latina. Lo anterior, en el marco de la acción colectiva, específicamente de los movimientos sociales y su interacción estratégica con oponentes como las compañías multinacionales, las organizaciones financieras internacionales y el Estado. Tomando como referencia las luchas ocurridas en Bolivia, Uruguay y México, con especial énfasis en La Guerra del Agua en Cochabamba (Bolivia).
Resumo:
Telmex es una organización que inicia su operación como empresa estatal mexicana con bajos niveles de eficiencia, posterior a su privatización tomó un nuevo rumbo en sus procesos internos, llevándola a generar modelos de negocio diferenciados y enfocados a la prestación de servicios de telecomunicación a la vanguardia. A partir de la búsqueda de nuevos horizontes la compañía logra tener presencia en la mayoría de los países del continente americano operando bajo la marca de “Telmex Internacional”, y a su vez, con sus respectivas subsidiarias en cada uno de los diferentes países, con el objetivo de satisfacer las necesidades locales con mayor efectividad. Con el apoyo de los diferentes acercamientos teóricos se busca identificar los patrones que le permitieron a Telmex llegar a posicionarse como una compañía líder en el sector de las telecomunicaciones en Latinoamérica y específicamente en Colombia, manteniéndose en un mercado competitivo mediante la oferta de servicios de empaquetamiento ajustados a las necesidades de los clientes.
Resumo:
Occupational therapists are equipped to promote wellbeing through occupation and to enable participation and meaningful engagement of people in their social and physical environments (WFOT, 2012). As such, the role of the occupational therapists is profoundly linked to the social, cultural and environmental characteristics of the contexts in which occupations take place. The central role that context plays in occupational performance creates an interesting dichotomy for the occupational therapist: on one hand, a profound understanding of cultural and social factors is required from the Occupational Therapy (OT) in order to develop a meaningful and successful collaboration with the person; on the other hand, the ability of the occupational therapists to recognize and explore the contextual factor of an occupation-person dyad transcends cultural and spatial barriers. As a result, occupational therapists are equipped to engage in international collaboration and practice, and as such face unique and enriching challenges. International fieldwork experiences have become a tool through which occupational therapists in training can develop the critical skills for understanding the impact of cultural and social factors on occupation. An OT student in an international fieldwork experience faces numerous challenges in leading a process that is both relevant and respectful to the characteristics of the local context: language, cultural perceptions of occupation and personhood, religious backgrounds, health care access, etc. These challenges stand out as ethical considerations that must be considered when navigating an international fieldwork experience (AOTA, 2009). For more than five years now, the Faculty of Rehabilitation Medicine (FRM) of the University of Alberta (UoFA) and the School of Medicine and Health Sciences at the Universidad del Rosario (UR), Bogota, Colombia, have sustained a productive and meaningful international collaboration. This collaboration includes a visit by Dr. Albert Cook, professor of the FRM and former dean, to the UR as the main guest speaker in the International Congress of Technologies for Disability Support (IBERDISCAP) in 2008. Furthermore, Dr. Cook was a speaker in the research seminar of the Assistive Technology Research Group of the Universidad del Rosario. Following Dr. Cook’s visit, Professors Liliana Álvarez and Adriana Ríos travelled to Edmonton and initiated collaboration with the FRM, resulting in the signing of an agreement between the FRM and the UR in 2009, agreement that has been maintained to this day. The main goal of this agreement is to increase academic and cultural cooperation between the UR and the UofA. Other activities have included the cooperation between Dr. Kim Adams (who has largely maintained interest and effort in supporting the capacity building of the UR rehabilitation programs in coordinating the provision of research placement opportunities for UR students at the UofA), an Assistive Technology course for clinicians and students led by Dr. Adams, and a research project that researched the use of basic cell phones to provide social interaction and health information access for people with disabilities in a low-income community in Colombia (led by Tim Barlott, OT, MSc, under the supervision of Dr. Adams). Since the beginning, the occupational therapy programs of the Universidad del Rosario and the University of Alberta have promoted this collaboration and have strived to engage in interactions that provide further development opportunities for students and staff. As part of this process, the international placement experience of UofA OT students was born under the leadership of: Claudia Rozo, OT program director at UR, placement and academic leadership of Elvis Castro and Angélica Monsalve, professors of the occupational therapy program at UR; and Dr. Lili Liu, OT department director at UofA, Cori Schmitz, Academic coordinator of clinical education at the UofA; and Tim Barlott and Liliana Álvarez leading the international and cross-cultural aspect of this collaboration.This publication summarizes and illustrates the process of international placement in community settings in Colombia, undertaken by occupational therapy students of the University of Alberta. It is our hope that this document can provide and document the ethical considerations of international fieldwork experience, the special characteristics of communities and the ways in which cultural and social competences are developed and help international students navigate the international setting. We also hope that this document will stimulate discussion among professional and academic communities about the importance and richness of international placement experiences and encourage staff and students to articulate their daily efforts with the global occupational therapy agenda.
Resumo:
La comprensión de los factores que interviene en la internacionalización de las Pymes en Colombia, conlleva toda una compleja estructura, fundamentación, estrategias, teorías, modelos y metodología organizacional, en el contexto dinámico del mundo comercial y financiero. Por consiguiente, se realizó un análisis de las teorías, modelos de internacionalización y de los factores que allí se reflejan y que interviene en el desarrollo de las pequeñas y medianas empresas, se comparó con las Pymes en Colombia y se apoyó en datos estadísticos de entidades gubernamentales y bases de datos.