Fêtes de famille. La religion. L'étoile de l'orpheline. L'adoption : drames allégoriques à l'usage des jeunes personnes

Comprend : Fêtes de famille - La religion - L'étoile de l'orpheline - L'adoption

Adoption Subsidies and Environmental Impacts of Alternative Energy Crops, March 2007

We provide estimates of the costs associated with inducing substantial conversion of land from production of traditional crops to switchgrass. Higher traditional crop prices due to increased demand for corn from the ethanol industry has increased the relative advantage that row crops have over switchgrass. Results indicate that farmers will convert to switchgrass production only with significant conversion subsidies. To examine potential environmental consequences of conversion, we investigate three stylized landscape usage scenarios, one with an entire conversion of a watershed to switchgrass production, a second with the entire watershed planted to continuous corn under a 50% removal rate of the biomass, and a third scenario that places switchgrass on the most erodible land in the watershed and places continuous corn on the least erodible. For each of these illustrative scenarios, the watershed-scale Soil and Water Assessment Tool (SWAT) hydrological model (Arnold et al., 1998; Arnold and Forher, 2005) is used to evaluate the effect of these landscape uses on sediment and nutrient loadings in the Maquoketa Watershed in eastern Iowa.

Workloads and strain process in Community Health Agents

ABSTRACT OBJECTIVE To identify the workloads present in the work activities of community health agents (CHAs) and the resulting strain processes. METHOD A descriptive, exploratory, cross-sectional and quantitative study conducted with 137 CHAs. Data were collected through a questionnaire and interview guided by the health surveillance software called SIMOSTE (Health Monitoring System of Nursing Workers), following the ethical codes of the current law. RESULTS In total, were identified 140 workloads involved in 122 strain processes, represented by the occurrence of health problems of the CHAs. The mechanical (55.00%) and biological (16.43%) loads stood out. The most common strain processes were the external causes of morbidity and mortality (62.31%) and diseases of the musculoskeletal system and connective tissue (10.66%). CONCLUSION From the identified overloads, it became evident that all workloads are present in the work process of CHAs, highlighting the mechanical load, represented mainly by external causes of morbidity and mortality that are related to occupational accidents.

Validation of the New Mix Design Process for Cold In-Place Rehabilitation Using Foamed Asphalt, 2007

Asphalt pavement recycling has grown dramatically over the last few years as a viable technology to rehabilitate existing asphalt pavements. Iowa's current Cold In-place Recycling (CIR) practice utilizes a generic recipe specification to define the characteristics of the CIR mixture. As CIR continues to evolve, the desire to place CIR mixture with specific engineering properties requires the use of a mix design process. A new mix design procedure was developed for Cold In-place Recycling using foamed asphalt (CIR-foam) in consideration of its predicted field performance. The new laboratory mix design process was validated against various Reclaimed Asphalt Pavement (RAP) materials to determine its consistency over a wide range of RAP materials available throughout Iowa. The performance tests, which include dynamic modulus test, dynamic creep test and raveling test, were conducted to evaluate the consistency of a new CIR-foam mix design process to ensure reliable mixture performance over a wide range of traffic and climatic conditions. The “lab designed” CIR will allow the pavement designer to take the properties of the CIR into account when determining the overlay thickness.

Spinning welfare: The gains from process innovation in cotton and car production

Economists and economic historians want to know how much better life is today than in the past.Fifty years ago economic historians found surprisingly small gains from 19th century US railroads,while more recently economists have found relatively large gains from electricity, computers and cellphones. In each case the implicit or explicit assumption is that researchers were measuring the valueof a new good to society. In this paper we use the same techniques to find the value to society ofmaking existing goods cheaper. Henry Ford did not invent the car, and the inventors of mechanisedcotton spinning in the industrial revolution invented no new product. But both made existing productsdramatically cheaper, bringing them into the reach of many more consumers. That in turn haspotentially large welfare effects. We find that the consumer surplus of Henry Ford s production linewas around 2% by 1923, 15 years after Ford began to implement the moving assembly line, while themechanisation of cotton spinning was worth around 6% by 1820, 34 years after its initial invention.Both are large: of the same order of magnitude as consumer expenditure on these items, and as largeor larger than the value of the internet to consumers. On the social savings measure traditionally usedby economic historians, these process innovations were worth 15% and 18% respectively, makingthem more important than railroads. Our results remind us that process innovations can be at least asimportant for welfare and productivity as the invention of new products.

Competing engines of growth: Innovation and standardization

We study a dynamic general equilibrium model where innovation takes theform of the introduction of new goods whose production requires skilled workers.Innovation is followed by a costly process of standardization, whereby these newgoods are adapted to be produced using unskilled labor. Our framework highlightsa number of novel results. First, standardization is both an engine of growth anda potential barrier to it. As a result, growth is an inverse U-shaped function ofthe standardization rate (and of competition). Second, we characterize the growthand welfare maximizing speed of standardization. We show how optimal protection of intellectual property rights affecting the cost of standardization vary withthe skill-endowment, the elasticity of substitution between goods and other parameters. Third, we show that, depending on how competition between innovatingand standardizing firms is modelled and on parameter values, a new type of multiplicity of equilibria may arise. Finally, we study the implications of our model forthe skill-premium and we illustrate novel reasons for linking North-South trade tointellectual property rights protection.

Adoption of financial technologies: Implications for money demand and monetary policy

In this paper we argue that inventory models are probably not usefulmodels of household money demand because the majority of households does nothold any interest bearing assets. The relevant decision for most people is notthe fraction of assets to be held in interest bearing form, but whether to holdany of such assets at all. The implications of this realization are interesting and important. We find that(a) the elasticity of money demand is very small when the interest rate is small,(b) the probability that a household holds any amount of interest bearing assetsis positively related to the level of financial assets, and (c) the cost ofadopting financial technologies is positively related to age and negatively relatedto the level of education. Unlike the traditional methods of money demand estimation, our methodology allowsfor the estimation of the interest--elasticity at low values of the nominalinterest rate. The finding that the elasticity is very small for interest ratesbelow 5 percent suggests that the welfare costs of inflation are small. At interest rates of 6 percent, the elasticity is close to 0.5. We find thatroughly one half of this elasticity can be attributed to the Baumol--Tobin orintensive margin and half of it can be attributed to the new adopters or extensivemargin. The intensive margin is less important at lower interest rates and moreimportant at higher interest rates.

Introducing systematic dispatcher-assisted cardiopulmonary resuscitation (telephone-CPR) in a non-Advanced Medical Priority Dispatch System (AMPDS): implementation process and costs.

OBJECTIVE: In order to improve the quality of our Emergency Medical Services (EMS), to raise bystander cardiopulmonary resuscitation rates and thereby meet what is becoming a universal standard in terms of quality of emergency services, we decided to implement systematic dispatcher-assisted or telephone-CPR (T-CPR) in our medical dispatch center, a non-Advanced Medical Priority Dispatch System. The aim of this article is to describe the implementation process, costs and results following the introduction of this new "quality" procedure. METHODS: This was a prospective study. Over an 8-week period, our EMS dispatchers were given new procedures to provide T-CPR. We then collected data on all non-traumatic cardiac arrests within our state (Vaud, Switzerland) for the following 12months. For each event, the dispatchers had to record in writing the reason they either ruled out cardiac arrest (CA) or did not propose T-CPR in the event they did suspect CA. All emergency call recordings were reviewed by the medical director of the EMS. The analysis of the recordings and the dispatchers' written explanations were then compared. RESULTS: During the 12-month study period, a total of 497 patients (both adults and children) were identified as having a non-traumatic cardiac arrest. Out of this total, 203 cases were excluded and 294 cases were eligible for T-CPR. Out of these eligible cases, dispatchers proposed T-CPR on 202 occasions (or 69% of eligible cases). They also erroneously proposed T-CPR on 17 occasions when a CA was wrongly identified (false positive). This represents 7.8% of all T-CPR. No costs were incurred to implement our study protocol and procedures. CONCLUSIONS: This study demonstrates it is possible, using a brief campaign of sensitization but without any specific training, to implement systematic dispatcher-assisted cardiopulmonary resuscitation in a non-Advanced Medical Priority Dispatch System such as our EMS that had no prior experience with systematic T-CPR. The results in terms of T-CPR delivery rate and false positive are similar to those found in previous studies. We found our results satisfying the given short time frame of this study. Our results demonstrate that it is possible to improve the quality of emergency services at moderate or even no additional costs and this should be of interest to all EMS that do not presently benefit from using T-CPR procedures. EMS that currently do not offer T-CPR should consider implementing this technique as soon as possible, and we expect our experience may provide answers to those planning to incorporate T-CPR in their daily practice.

The role of institutions in the contractual process

Human beings increase their productivity by specializingtheir resources and exchanging their products. Theorganization of exchange is costly, however, becausespecialized activities need coordination and incentiveshave to be aligned. This work first describes how theseexchanges are organized in an institutional environment.It then focuses on the dual effect of this environment-as with any other specialized resource, institutions maybe used for expropriation purposes. They enjoyspecialization advantages in safeguarding exchange butthey also make possible new forms of opportunism,causing new costs of exchange. Three perverse tendenciesare identified:In the legal field, there is a surplus ofmandatory rules and, at the same time, a deficit in default rules. Second, courts activity is biased againstthe quasi-judicial role of the parties and the market. Third, Market enforcement is based on reputationalassets that are badly exposed to opportunism.