A new route to furanoeremophilane sesquiterpenoids. Synthesis of Senecio metabolites (+/-)-6-hydroxyeuryopsin, (+/-)-1,10-epoxy-6-hydroxyeuryopsin, (+/-)-toluccanolide A and (+/-)-toluccanolide C

A new strategy for the synthesis of sesquiterpenoids of the furanoeremophilane family was developed in which the tricyclic nucleus was assembled in an A + C -> A - C -> A - B - C sequence. The A - C connection was made via coupling of a cyclohexenylmethyl bromide with a stannylfuran under "ligandless" Stille conditions, and the key cyclization which closed ring B was accomplished with complete stereocontrol by intramolecular formylation of a 2-silylfuran in the presence of trimethylsilyl triflate. This route was used to complete the first total syntheses of the furanoeremophilane 6-hydroxyeuryopsin and the eremophilenolides toluccanolide A and toluccanolide C, as well as a formal synthesis of 1,10-epoxy-6-hydroxyeuryopsin.

Synthesis of prebiotic galactooligosaccharides using whole cells of a novel strain, Bifidobacterium bifidum NCIMB 41171

A novel strain of Bifidobacterium bifidum NCIMB 41171, isolated from a faecal sample from a healthy human volunteer and able to express beta-galactosidase activity, was used in synthesis reactions for the production of galactooligosaccharide from lactose. The beta-galactosidase activity of whole bifidobacterial cells showed an optimum activity at pH 6.8-7.0 and 40 degrees C. The transgalactosylation activity of the B. bifidum cells from 50% (w/w) lactose resulted in a galactooligosaccharide mixture (20% w/w) comprising (w/w): 25% disaccharides, 35% trisaccharides, 25% tetrasaccharides and 15% pentasaccharides. Using different initial lactose concentrations, the conversion rate to galactooligosaccharides was maximum (35%) when 55% (w/w) lactose was used. In fermentation experiments, B. bifidum showed an increased preference towards the produced galactooligosaccharide mixture, displaying higher growth rate and short-chain fatty acid production when compared with commercially available oligosaccharides.

Effect of heat on rheology, surface hydrophobicity and molecular weight distribution of glutens extracted from flours with different bread-making quality

Gluten was extracted from flours of several different wheat varieties of varying baking quality. Creep compliance was measured at room temperature and tan 6 was measured over a range of temperatures from 25 to 95 degrees C. The extracted glutens were heat-treated for 20 min at 25, 40, 50, 60, 70 and 90 degrees C in a water bath, freeze-dried and ground to a fine powder. Tests were carried out for extractability in sodium dodecyl sulphate, free sulphydryl (SH) groups using Ellman's method, surface hydrophobicity and molecular weight (MW) distribution (MWD) using field-flow fractionation and multi-angle laser light scattering. With increasing temperature, the glutens showed a decrease in extractability, with the most rapid decreases occurring between 70 and 90 degrees C, a major transition in tan 6 at around 60 degrees C and a minor transition at 40 degrees C for most varieties, a decrease in free SH groups and surface hydrophobicity and a shift in the MWD towards higher MW. The poor bread-making variety Riband showed the highest values of tan delta and Newtonian compliance, the lowest content of free SH groups and the largest increase of HMW/LMW with increasing temperature. No significant correlations with baking volume were found between any of the measured parameters. (c) 2007 Elsevier Ltd. All rights reserved.

Effects of drying methods and conditions on antimicrobial activity of edible chitosan films enriched with galangal extract

The aim of this work was to study the effects of drying methods and conditions (i.e., ambient drying, hot air drying at 40 degrees C, vacuum drying and low-pressure superheated steam drying within the temperature range of 70-90 degrees C at an absolute pressure of 10 kPa) as well as the concentration of galangal extract on the antimicrobial activity of edible chitosan films against Staphylococcus aureus. Galangal extract was added to the film forming solution as a natural antimicrobial agent in the concentration range of 0.3-0.9 g/100 g. Fourier transform infrared (FTIR) spectra and swelling of the films were also evaluated to investigate interaction between chitosan and the galangal extract. The antimicrobial activity of the films was evaluated by the disc diffusion and viable cell count method, while the morphology of bacteria treated with the antimicrobial films was observed via transmission electron microscopy (TEM). The antimicrobial activity, swelling and functional group interaction of the antimicrobial films were found to be affected by the drying methods and conditions as well as the concentration of the galangal extract. The electron microscopic observations revealed that cell wall and cell membrane of S. aureus treated by the antimicrobial films were significantly damaged. (C) 2009 Elsevier Ltd. All rights reserved.

On the recursive sequence Xn = axn-1+bxn-2/c+dxn-1xn-2

In this Paper, we study the invariant intervals, the global attractivity of the equilibrium points, and the asymptotic behavior of the solutions of the difference equation x(n) = ax(n-1) + bx(n-2) / c + dx(n-1)x(n-2), n =1, 2, ..., where a greater than or equal to 0, b, c, d > 0. (C) 2004 Elsevier Inc. All rights reserved.

Large-scale surface mass balance of ice sheets from a comprehensive atmospheric model

The surface mass balance for Greenland and Antarctica has been calculated using model data from an AMIP-type experiment for the period 1979–2001 using the ECHAM5 spectral transform model at different triangular truncations. There is a significant reduction in the calculated ablation for the highest model resolution, T319 with an equivalent grid distance of ca 40 km. As a consequence the T319 model has a positive surface mass balance for both ice sheets during the period. For Greenland, the models at lower resolution, T106 and T63, on the other hand, have a much stronger ablation leading to a negative surface mass balance. Calculations have also been undertaken for a climate change experiment using the IPCC scenario A1B, with a T213 resolution (corresponding to a grid distance of some 60 km) and comparing two 30-year periods from the end of the twentieth century and the end of the twenty-first century, respectively. For Greenland there is change of 495 km3/year, going from a positive to a negative surface mass balance corresponding to a sea level rise of 1.4 mm/year. For Antarctica there is an increase in the positive surface mass balance of 285 km3/year corresponding to a sea level fall by 0.8 mm/year. The surface mass balance changes of the two ice sheets lead to a sea level rise of 7 cm at the end of this century compared to end of the twentieth century. Other possible mass losses such as due to changes in the calving of icebergs are not considered. It appears that such changes must increase significantly, and several times more than the surface mass balance changes, if the ice sheets are to make a major contribution to sea level rise this century. The model calculations indicate large inter-annual variations in all relevant parameters making it impossible to identify robust trends from the examined periods at the end of the twentieth century. The calculated inter-annual variations are similar in magnitude to observations. The 30-year trend in SMB at the end of the twenty-first century is significant. The increase in precipitation on the ice sheets follows closely the Clausius-Clapeyron relation and is the main reason for the increase in the surface mass balance of Antarctica. On Greenland precipitation in the form of snow is gradually starting to decrease and cannot compensate for the increase in ablation. Another factor is the proportionally higher temperature increase on Greenland leading to a larger ablation. It follows that a modest increase in temperature will not be sufficient to compensate for the increase in accumulation, but this will change when temperature increases go beyond any critical limit. Calculations show that such a limit for Greenland might well be passed during this century. For Antarctica this will take much longer and probably well into following centuries.

Polar cap patch segmentation of the tongue of ionization in the morning convection cell

Two types of poleward moving plasma concentration enhancements (PMPCEs) were observed during a sequence of pulsed reconnection events, both in the morning convection cell: Type L (low density) was associated with a cusp flow channel and seems likely to have been produced by ionization associated with particle precipitation, while Type H (high density) appeared to originate from the segmentation of the tongue of ionization by the processes which produced the Type L events. As a result, the Type L and Type H PMPCEs were interspersed, producing a complex density structure which underlines the importance of cusp flow channels as a mechanism for segmenting and structuring electron density in the cusp and shows the necessity of differentiating between at least two classes of electron density patches.

On the transfer of prior tests or study events to subsequent study

Tests, as learning events, are often more effective than are additional study opportunities, especially when recall is tested after a long retention interval. To what degree, though, do prior test or study events support subsequent study activities? We set out to test an implication of Bjork and Bjork’s (1992) new theory of disuse—that, under some circumstances, prior study may facilitate subsequent study more than does prior testing. Participants learned English–Swahili translations and then underwent a practice phase during which some items were tested (without feedback) and other items were restudied. Although tested items were better recalled after a 1-week delay than were restudied items, this benefit did not persist after participants had the opportunity to study the items again via feedback. In fact, after this additional study opportunity, items that had been restudied earlier were better recalled than were items that had been tested earlier. These results suggest that measuring the memorial consequences of testing requires more than a single test of retention and, theoretically, a consideration of the differing status of initially recallable and nonrecallable items.

Renal cells activate the platelet receptor CLEC-2 through podoplanin.

We have recently shown that the C-type lectin-like receptor, CLEC-2, is expressed on platelets and that it mediates powerful platelet aggregation by the snake venom toxin rhodocytin. In addition, we have provided indirect evidence for an endogenous ligand for CLEC-2 in renal cells expressing HIV-1. This putative ligand facilitates transmission of HIV through its incorporation into the viral envelope and binding to CLEC-2 on platelets. The aim of the present study was to identify the ligand on these cells which binds to CLEC-2 on platelets. Recombinant CLEC-2 exhibits specific binding to HEK-293T (human embryonic kidney) cells in which the HIV can be grown. Furthermore, HEK-293T cells activate both platelets and CLEC-2-transfected DT-40 B-cells. The transmembrane protein podoplanin was identified on HEK-293T cells and was demonstrated to mediate both binding of HEK-293T cells to CLEC-2 and HEK-293T cell activation of CLEC-2-transfected DT-40 B-cells. Podoplanin is expressed on renal cells (podocytes). Furthermore, a direct interaction between CLEC-2 and podoplanin was confirmed using surface plasmon resonance and was shown to be independent of glycosylation of CLEC-2. The interaction has an affinity of 24.5+/-3.7 microM. The present study identifies podoplanin as a ligand for CLEC-2 on renal cells.

Elastomeric Composites Based on Ethylene-Propylene-Diene Monomer Rubber and Conducting Polymer-Modified Carbon Black

Thermally stable elastomeric composites based on ethylene-propylene-diene monomer (EPDM) and conducting polymer-modified carbon black (CPMCB) additives were produced by casting and crosslinked by compression molding. CPMCB represent a novel thermally stable conductive compound made via ""in situ"" deposition of intrinsically conducting polymers (ICP) such as polyaniline or polypyrrole on carbon black particles. Thermogravimetric analysis showed that the composites are thermally stable with no appreciable degradation at ca. 300 degrees C. Incorporating CPMCB has been found to be advantageous to the processing of composites, as the presence of ICP lead to a better distribution of the filler within the rubber matrix, as confirmed by morphological analysis. These materials have a percolation threshold range of 5-10 phr depending on the formulation and electrical dc conductivity values in the range of 1 x 10(-3) to 1 x 10(-2) S cm(-1) above the percolation threshold. A less pronounced reinforcing effect was observed in composites produced with ICP-modified additives in relation to those produced only with carbon black. The results obtained in this study show the feasibility of this method for producing stable, electrically conducting composites with elastomeric characteristics. POLYM. COMPOS., 30:897-906, 2009. (C) 2008 Society of Plastics Engineers

The C(K, X) spaces for compact metric spaces K and X with a uniformly convex maximal factor

In this paper, we prove that if a Banach space X contains some uniformly convex subspace in certain geometric position, then the C(K, X) spaces of all X-valued continuous functions defined on the compact metric spaces K have exactly the same isomorphism classes that the C(K) spaces. This provides a vector-valued extension of classical results of Bessaga and Pelczynski (1960) [2] and Milutin (1966) [13] on the isomorphic classification of the separable C(K) spaces. As a consequence, we show that if 1 < p < q < infinity then for every infinite countable compact metric spaces K(1), K(2), K(3) and K(4) are equivalent: (a) C(K(1), l(p)) circle plus C(K(2), l(q)) is isomorphic to C(K(3), l(p)) circle plus (K(4), l(q)). (b) C(K(1)) is isomorphic to C(K(3)) and C(K(2)) is isomorphic to C(K(4)). (C) 2011 Elsevier Inc. All rights reserved.

The influence of perhydroazepine and piperidine as further ancillary ligands on Ru-PPh(3)-based catalysts for ROMP of norbornene and norbornadiene

Polynorbornadiene and polynorbornene were synthesized via ring opening metathesis polymerization (ROMP) with [RuCl(2)(PPh(3))(2)(amine)] as catalyst precursors, amine = piperidine (1) or perhydroazepine (2) in the presence of 5 mu L of ethyl diazoacetate (EDA) ([monomer]/[Ru] = 5000; 40 degrees C with 1; 25 degrees C with 2). The effects of the solvent volume (2-8 mL of CHCl(3)) reaction time (5-120 min) and atmosphere type (argon and air) on the yields were investigated to observe the behavior of the two different precursors. Quantitative yields were obtained for 60 or 120 min regardless of the starting volumes, either in argon or air, with both Ru species. However, low yields were obtained for short times (5-30 min) when the reactions are performed with large volumes (6-8 mL). In argon, the yields were larger with 2, associated to a faster propagation reaction controlled by the Ru active species. In air, the yields were larger with 1, associated to a higher resistance to O(2) of the starting and propagating Ru species. The different activities between 1 and 2 are discussed considering the steric hindrance and electronic characteristics of the amines such as ancillary ligands and their arrangements with PPh(3) and Cl(-) ions in the metal centers. (c) 2009 Elsevier B.V. All rights reserved.

Kombinerade bio- och solvärmesystem : Handbok för systemutformning

Syftet med denna skrift är att sammanställa den kunskap som finns beträffande kombinerade pellet- och solvärmesystem för att på så sätt stödja företagen i deras systemutveckling. Denna skrift behandlar erfarenheter som gjorts inom forskning på sol och pellet och omsätter dessa i praktiska råd för systemutformning. Förslag ges på systemutformning, olika tekniska lösningar samt hur systemen bör styras.När solvärme och pellet skall kombineras finns det många möjligheter att koppla ihop systemen. Det finns olika traditioner i olika länder, vilket gör att systemlösningarna varierar från land till land. En generell slutsats är dock att konventionella svenska pannor med inbyggd varmvattenberedning inte är lämpliga i konventionella solvärmesystem. Det ger komplicerade systemlösningar och det är svårt att åstadkomma bra skiktning i tanken.I ett solvärmesystem är det viktigt att tanken kan laddas ur på ett sådant sätt att kraftig skiktning erhålls. Det betyder att tankens botten skall kylas ner till temperaturen på ingående kallvatten och att tankens mellersta del skall kylas till samma temperatur som radiatorreturen. Om solfångaren även vintertid kan arbeta med att förvärma kallvatten av 10 till 20ºC fås en betydligt bättre verkningsgrad på solfångaren än om radiator returen skall förvärmas, som i bästa fall ligger på en temperaturnivå på mellan 30 och 40ºC. Av denna anledning skall radiator returen placeras en bra bit upp från botten i ackumulatortanken och tappvattnet skall förvärmas i en slinga som börjar i tankens botten. Om det finns ett VVC-system måste systemet anslutas på ett speciellt sätt så att inte tankens skiktning störs.En annan viktig parameter i tankens utformning är att värmeförlusterna hålls låga, detta är viktigt för att klara tappvattenlasten mulna perioder och för att hålla energianvändningen låg. I moderna hus där tanken placeras i boutrymmet blir det också en komfortfråga för att undvika över-temperaturer i rummet där tanken placeras. För att få en bra isolering måste man se till att det finns ett lufttätt skikt över hela isoleringen som dessutom sluter tätt mot röranslutningar. Ofrivillig själv-cirkulation i anslutande kretsar som kan kyla av och blanda om ackumulatortanken skall förhindras med backventiler.Vid design av solfångarkretsen måste överhettning och stagnation kunna klaras utan glykolnedbrytning eller andra skador. Partiell förångning innebär att man låter solfångaren koka på ett kontrollerat sätt så att endast ånga blir kvar i solfångaren. Vätska samlas i ett större expansionskärl och systemet återfylls när vätskan kondenserar. Dränerande system med enbart vatten är också en möjlighet, men kräver större noggrannhet vid installationen så att sönderfrysning undviks.Pelletkaminer (luftburna) ger god komfort och lågt elbehov i direktelvärmda hus med öppen planlösning, dvs. om värmen från kaminen kan spridas till alla rum utan att behöva passera genom mer än en dörröppning. Även i lågenergihus kan den luftburna kaminen vara lämplig. I hus med mer sluten planlösning krävs en vattenmantlad kamin med hög andel värme till vattenkretsen och ett vattenburet värmesystem. Det är viktigt att sådana system utformas korrekt för att komforten skall bli hög och elanvändningen låg. Brukarens aspekter och komfortkrav måste beaktas vid användning av kaminer, eftersom det krävs en temperaturskillnad mellan olika rum för att få värmespridning från det rum där kaminen är placerad.

Nulägesanalys av passivhusbyggande i Sverige 2010

Byggsektorn slukar årligen ca 40 % av Sveriges totala energiförbrukning. Nya normer kräver energieffektivare bostäder. Normerna idag fokuserar enbart på driftkostnader och tar inte alls hänsyn till energiförbrukningen och koldioxidavtrycket som själva byggprocessen alstrar. Med höga driftvärden blir energiförbrukningen i byggskedet en liten procent men för passivhus, och ännu högre grad för plusenergihus, som förbrukar ytterst lite energi, blir tillverkningsenergin den avgörande miljöbelastningen. Ny teknik för att uppnå de nya kraven finns i viss utsträckning, men kännedom och kunskap om dem saknas då de fått otillräcklig spridning. En del tekniska lösningar befinner sig fortfarande i en utvecklingsprocess och är inte färdigutvecklade för en större produktion. Ambitionen med denna nulägesanalys och därtill lika inventeringsarbete har varit att fånga in de lösningar och tester som gjorts och ta del av utvärderingarna så att vi kan dra nytta utav dessa i vårt arbete. Denna sammanställning grundar sig på muntlig information vi tagit del av under studiebesöken, ritningar, beskrivningar, protokoll samt rapporter vi samlat in. Syfte Syftet med vår resa till nedanstående objekt var att ta reda på hur flerfamiljshus med passivhus standard är byggda. Vilka stomval har gjorts och av vilken anledning. Vi ville också ta reda på hur man klarat av täthetskraven i de olika projekten samt hur detta mätts. I många fall verkar det som om utformning och arkitektur glöms bort när man ska bygga passivhus som om passivhuskravet vore så betungande att god utformning inte är förening med det. Därför ville vi också bedöma byggnaderna från arkitektoniska aspekter då dessa är av stor vikt för en bra miljö.