Optimization of Pumping System in Solar Pumped Laser.

The coupling between solar light radiation and laser rod medium in a solar pumped laser affects the efficiency of the laser. To optimize the pumping system, simulation of the two-stage pumping system with a Fresnel lens and conic pumping cavity is carried out with Tracepro software. According to the power density distribution along the axis at focal place of the Fresnel lens, the diameter and position of the pumping cavity window and the distance of the window from the Fresnel lens are optimized. The power density distributions along the laser rod axis of different cavity lengths and different cavity tapers are also analyzed. The optimal structure of taper cavity is obtained. The mirror relecting cavity and ceramic cavity are introduced in detail.

Study of the temperature distribution in Si nanowires under microscopic laser beam excitation

Study of the temperature distribution in Si nanowires under microscopic laser beam excitation

Forward micro-inverter with primary-parallel secondary-series multicore transformer

This paper presents a primary-parallel secondary-series multicore forward micro-inverter for photovoltaic AC-module application. The proposed solution changes the number of active phases depending on the grid voltage, thus enabling the usage of low-profile unitary turns ratio transformers. Therefore, the transformers are well coupled and the overall performance of the inverter is improved. Due to the multiphase solution the number of devices increases but, the current stress and losses per device are reduced contributing to an easier thermal management. Furthermore, the decoupling capacitor is split between the phases, contributing to a low-profile solution without electrolytic capacitors suitable to be mounted in the frame of a PV module.

Electromagnetic interaction between a laser beam and semiconductor nanowires deposited on different substrates: Raman enhancement in Si Nanowires

Raman scattering of Si nanowires (NWs) presents antenna effects. The electromagnetic resonance depends on the electromagnetic coupling of the system laser/NW/substrate. The antenna effect of the Raman signal was measured in individual NWs deposited on different substrates, and also free standing NWs in air. The one phonon Raman band in NWs can reach high intensities depending on the system configuration; values of Raman intensity per unit volume more than a few hundred times with respect to bulk substrate can be obtainedRaman scattering of Si nanowires (NWs) presents antenna effects. The electromagnetic resonance depends on the electromagnetic coupling of the system laser/NW/substrate. The antenna effect of the Raman signal was measured in individual NWs deposited on different substrates, and also free standing NWs in air. The one phonon Raman band in NWs can reach high intensities depending on the system configuration; values of Raman intensity per unit volume more than a few hundred times with respect to bulk substrate can be obtained

Web based interactive educational software introducing semiconductor laser dynamics: Sound Of Lasers (SOL)

In this work, educational software for intuitive understanding of the basic dynamic processes of semiconductor lasers is presented. The proposed tool is addressed to the students of optical communication courses, encouraging self consolidation of the subjects learned in lectures. The semiconductor laser model is based on the well known rate equations for the carrier density, photon density and optical phase. The direct modulation of the laser is considered with input parameters which can be selected by the user. Different options for the waveform, amplitude and frequency of thpoint. Simulation results are plotted for carrier density and output power versus time. Instantaneous frequency variations of the laser output are numerically shifted to the audible frequency range and sent to the computer loudspeakers. This results in an intuitive description of the “chirp” phenomenon due to amplitude-phase coupling, typical of directly modulated semiconductor lasers. In this way, the student can actually listen to the time resolved spectral content of the laser output. By changing the laser parameters and/or the modulation parameters,consequent variation of the laser output can be appreciated in intuitive manner. The proposed educational tool has been previously implemented by the same authors with locally executable software. In the present manuscript, we extend our previous work to a web based platform, offering improved distribution and allowing its use to the wide audience of the web.

Microfabrication processes for microfluidic devices on a single laser Workstation: direct writing lithography on SU-8, laser ablation on polymers and mask manufacturing

We demonstrate the capability of a laser micromachining workstation for cost-effective manufacturing of a variety of microfluidic devices, including SU-8 microchannels on silicon wafers and 3D complex structures made on polyimide Kapton® or poly carbonate (PC). The workstation combines a KrF excimer laser at 248 nm and a Nd3+:YVO4 DPSS with a frequency tripled at 355 nm with a lens magnification 10X, both lasers working at a pulsed regime with nanoseconds (ns) pulse duration. Workstation also includes a high-resolution motorized XYZ-tilt axis (~ 1 um / axis) and a Through The Lens (TTL) imaging system for a high accurate positioning over a 120 x 120 mm working area. We have surveyed different fabrication techniques: direct writing lithography,mask manufacturing for contact lithography and polymer laser ablation for complex 3D devices, achieving width channels down to 13μ m on 50μ m SU-8 thickness using direct writing lithography, and width channels of 40 μm for polyimide on SiO2 plate. Finally, we have tested the use of some devices for capillary chips measuring the flow speed for liquids with different viscosities. As a result, we have characterized the presence of liquid in the channel by interferometric microscopy.

Experimental and numerical study of cw green laser crystallization of a-Si:H thin films

Crystallization and grain growth technique of thin film silicon are among the most promising methods for improving efficiency and lowering cost of solar cells. A major advantage of laser crystallization and annealing over conventional heating methods is its ability to limit rapid heating and cooling to thin surface layers. Laser energy is used to heat the amorphous silicon thin film, melting it and changing the microstructure to polycrystalline silicon (poly-Si) as it cools. Depending on the laser density, the vaporization temperature can be reached at the center of the irradiated area. In these cases ablation effects are expected and the annealing process becomes ineffective. The heating process in the a-Si thin film is governed by the general heat transfer equation. The two dimensional non-linear heat transfer equation with a moving heat source is solve numerically using the finite element method (FEM), particularly COMSOL Multiphysics. The numerical model help to establish the density and the process speed range needed to assure the melting and crystallization without damage or ablation of the silicon surface. The samples of a-Si obtained by physical vapour deposition were irradiated with a cw-green laser source (Millennia Prime from Newport-Spectra) that delivers up to 15 W of average power. The morphology of the irradiated area was characterized by confocal laser scanning microscopy (Leica DCM3D) and Scanning Electron Microscopy (SEM Hitachi 3000N). The structural properties were studied by micro-Raman spectroscopy (Renishaw, inVia Raman microscope).

Laser Shock Microforming of Thin Metal Sheets with Q-Switched ns Lasers

The increasing demands in MEMS fabrication are leading to new requirements in production technology. Especially the packaging and assembly require high accuracy in positioning and high reproducibility in combination with low production costs. Conventional assembly technology and mechanical adjustment methods are time consuming and expensive. Each component of the system has to be positioned and fixed. Also adjustment of the parts after joining requires additional mechanical devices that need to be accessible after joining.

LSP Influence on Mechanical Properties of Thin Dissimilar Laser Welded Joints

Assessment of laser shock processing effects on mechanical resistance of thin dissimilar laser welded joints

Numerical prediction of residual stresses fields induced in thin Al2024-T351 sheets by laser shock processing

Outline: • Introduction • Numerical model SHOCKLAS© • Single LSP pulses • Overlapped LSP pulses • Discussion and Outlook

Assessment of laser peening induced effects on Ti6Al4V by non-destructive measurements

Assessment of laser peening induced effects on Ti6Al4V by destructive and non-destructive techniques

A method to obtain the thermal parameters and the photothermal transduction efficiency in an optical hyperthermia device based on laser irradiation of gold nanoparticles

Optical hyperthermia systems based on the laser irradiation of gold nanorods seem to be a promising tool in the development of therapies against cancer. After a proof of concept in which the authors demonstrated the efficiency of this kind of systems, a modeling process based on an equivalent thermal-electric circuit has been carried out to determine the thermal parameters of the system and an energy balance obtained from the time-dependent heating and cooling temperature curves of the irradiated samples in order to obtain the photothermal transduction efficiency. By knowing this parameter, it is possible to increase the effectiveness of the treatments, thanks to the possibility of predicting the response of the device depending on the working configuration. As an example, the thermal behavior of two different kinds of nanoparticles is compared. The results show that, under identical conditions, the use of PEGylated gold nanorods allows for a more efficient heating compared with bare nanorods, and therefore, it results in a more effective therapy.

Marco computacional para la definición de un modelo bio-inspirado en la señalización celular

Las Redes de Procesadores Evolutivos-NEP propuestas en [Mitrana et al., 2001], son un modelo computacional bio-inspirado a partir de la evolución de poblaciones de células, definiendo a nivel sintáctico algunas propiedades biológicas. En este modelo, las células están representadas por medio de palabras que describen secuencias de ADN. Informalmente, en algún instante de tiempo, el sistema evolutivo está representado por una colección de palabras cada una de las cuales representa una célula. El espacio genotipo de las especies, es un conjunto que recoge aquellas palabras que son aceptadas como sobrevivientes (es decir, como \correctas"). Desde el punto de vista de la evolución, las células pertenecen a especies y su comunidad evoluciona de acuerdo a procesos biológicos como la mutación y la división celular. éstos procesos representan el proceso natural de evolución y ponen de manifiesto una característica intrínseca de la naturaleza: el paralelismo. En este modelo, estos procesos son vistos como operaciones sobre palabras. Formalmente, el modelo de las NEP constituyen una arquitectura paralela y distribuida de procesamiento simbólico inspirada en la Máquina de conexión [Hillis, 1981], en el Paradigma de Flujo Lógico [Errico and Jesshope, 1994] y en las Redes de Procesadores Paralelos de Lenguajes (RPPL) [Csuhaj-Varju and Salomaa, 1997]. Al modelo NEP se han ido agregando nuevas y novedosas extensiones hasta el punto que actualmente podemos hablar de una familia de Redes de Procesadores Bio-inspirados (NBP) [Mitrana et al., 2012b]. Un considerable número de trabajos a lo largo de los últimos años han demostrado la potencia computacional de la familia NBP. En general, éstos modelos son computacionalmente completos, universales y eficientes [Manea et al., 2007], [Manea et al., 2010b], [Mitrana and Martín-Vide, 2005]. De acuerdo a lo anterior, se puede afirmar que el modelo NEP ha adquirido hasta el momento un nivel de madurez considerable. Sin embargo, aunque el modelo es de inspiración biológica, sus metas siguen estando motivadas en la Teoría de Lenguajes Formales y las Ciencias de la Computación. En este sentido, los aspectos biológicos han sido abordados desde una perspectiva cualitativa y el acercamiento a la realidad biológica es de forma meramente sintáctica. Para considerar estos aspectos y lograr dicho acercamiento es necesario que el modelo NEP tenga una perspectiva más amplia que incorpore la interacción de aspectos tanto cualitativos como cuantitativos. La contribución de esta Tesis puede considerarse como un paso hacia adelante en una nueva etapa de los NEPs, donde el carácter cuantitativo del modelo es de primordial interés y donde existen posibilidades de un cambio visible en el enfoque de interés del dominio de los problemas a considerar: de las ciencias de la computación hacia la simulación/modelado biológico y viceversa, entre otros. El marco computacional que proponemos en esta Tesis extiende el modelo de las Redes de Procesadores Evolutivos (NEP) y define arquitectura inspirada en la definición de bloques funcionales del proceso de señalización celular para la solución de problemas computacionales complejos y el modelado de fenómenos celulares desde una perspectiva discreta. En particular, se proponen dos extensiones: (1) los Transductores basados en Redes de Procesadores Evolutivos (NEPT), y (2) las Redes Parametrizadas de Procesadores Evolutivos Polarizados (PNPEP). La conservación de las propiedades y el poder computacional tanto de NEPT como de PNPEP se demuestra formalmente. Varias simulaciones de procesos relacionados con la señalización celular son abordadas sintáctica y computacionalmente, con el _n de mostrar la aplicabilidad e idoneidad de estas dos extensiones. ABSTRACT Network of Evolutionary Processors -NEP was proposed in [Mitrana et al., 2001], as a computational model inspired by the evolution of cell populations, which might model some properties of evolving cell communities at the syntactical level. In this model, cells are represented by words which encode their DNA sequences. Informally, at any moment of time, the evolutionary system is described by a collection of words, where each word represents one cell. Cells belong to species and their community evolves according to mutations and division which are defined by operations on words. Only those cells accepted as survivors (correct) are represented by a word in a given set of words, called the genotype space of the species. This feature is analogous with the natural process of evolution. Formally, NEP is based on an architecture for parallel and distributed processing inspired from the Connection Machine [Hillis, 1981], the Flow Logic Paradigm [Errico and Jesshope, 1994] and the Networks of Parallel Language Processors (RPPL) [Csuhaj-Varju and Salomaa, 1997]. Since the date when NEP was proposed, several extensions and variants have appeared engendering a new set of models named Networks of Bio-inspired Processors (NBP) [Mitrana et al., 2012b]. During this time, several works have proved the computational power of NBP. Specifically, their efficiency, universality, and computational completeness have been thoroughly investigated [Manea et al., 2007, Manea et al., 2010b, Mitrana and Martín-Vide, 2005]. Therefore, we can say that the NEP model has reached its maturity. Nevertheless, although the NEP model is biologically inspired, this model is mainly motivated by mathematical and computer science goals. In this context, the biological aspects are only considered from a qualitative and syntactical perspective. In view of this lack, it is important to try to keep the NEP theory as close as possible to the biological reality, extending their perspective incorporating the interplay of qualitative and quantitative aspects. The contribution of this Thesis, can be considered as a starting point in a new era of the NEP model. Then, the quantitative character of the NEP model is mandatory and it can address completely new different types of problems with respect to the classical computational domain (e.g. from the computer science to system biology). Therefore, the computational framework that we propose extends the NEP model and defines an architecture inspired by the functional blocks from cellular signaling in order to solve complex computational problems and cellular phenomena modeled from a discrete perspective. Particularly, we propose two extensions, namely: (1) Transducers based on Network of Evolutionary Processors (NEPT), and (2) Parametrized Network of Polarized Evolutionary Processors (PNPEP). Additionally, we have formally proved that the properties and computational power of NEP is kept in both extensions. Several simulations about processes related with cellular signaling both syntactical and computationally have been considered to show the model suitability.

High-Power High-Efficiency Laser Power Transmission at 100m Using Optimized Multi-Cell GaAs Converter

A high-power high-efficiency laser power transmission system at 100m based on an optimized multi-cell GaAs converter capable of supplying 9.7W of electricity is demonstrated. An I-V testing system integrated with a data acquisition circuit and an analysis software is designed to measure the efficiency and the I-V characteristics of the laser power converter (LPC). The dependencies of the converter’s efficiency with respect to wavelength, laser intensity and temperature are analyzed. A diode laser with 793nm of wavelength and 24W of power is used to test the LPC and the software. The maximum efficiency of the LPC is 48.4% at an input laser power of 8W at room temperature. When the input laser power is 24W (laser intensity of 60000W/m2), the efficiency is 40.4% and the output voltage is 4 V. The overall efficiency from electricity to electricity is 11.6%.

Experimental implementation of a biometric laser synaptic sensor

We fabricate a biometric laser fiber synaptic sensor to transmit information from one neuron cell to the other by an optical way. The optical synapse is constructed on the base of an erbium-doped fiber laser, whose pumped diode current is driven by a pre-synaptic FitzHugh–Nagumo electronic neuron, and the laser output controls a post-synaptic FitzHugh–Nagumo electronic neuron. The implemented laser synapse displays very rich dynamics, including fixed points, periodic orbits with different frequency-locking ratios and chaos. These regimes can be beneficial for efficient biorobotics, where behavioral flexibility subserved by synaptic connectivity is a challenge.