Nanomechanical Mapping, Hierarchical Polymer Dynamics, and Miscibility in the Presence of Chain-End Grafted Nanoparticles

To improve the spatial distribution of nano particles in a polymeric host and to enhance the interfacial interaction with the host, the use of chain-end grafted nanoparticle has gained popularity in the field of polymeric nanocomposites. Besides changing the material properties of the host, these grafted nanoparticles strongly alter the dynamics of the polymer chain at both local and cooperative length scales (relaxations) by manipulating the enthalpic and entropic interactions. It is difficult to map the distribution of these chain-end grafted nanoparticles in the blend by conventional techniques, and herein, we attempted to characterize it by unique technique(s) like peak force quantitative nanomechanical mapping (PFQNM) through AFM (atomic force microscopy) imaging and dielectric relaxation spectroscopy (DRS). Such techniques, besides shedding light on the spatial distribution of the nanoparticles, also give critical information on the changing elasticity at smaller length scales and hierarchical polymer chain dynamics in the vicinity of the nanoparticles. The effect of one-dimensional rodlike multiwall carbon nanotubes (MWNTs), with the characteristic dimension of the order of the radius of gyration of the polymeric chain, on the phase miscibility and chain dynamics in a classical LCST mixture of polystyrene/ poly(vinyl methyl ether) (PS/PVME) was examined in detail using the above techniques. In order to tune the localization of the nanotubes, different molecular weights of PS (13, 31, and 46 kDa), synthesized using RAFT (reversible addition fragmentation chain transfer) polymerization, was grafted onto MWNTs in situ. The thermodynamic miscibility in the blends was assessed by low-amplitude isochronal temperature sweeps, the spatial distribution of MWNTs in the blends was evaluated by PFQNM, and the hierarchical polymer chain dynamics was studied by DRS. It was observed that the miscibility, concentration fluctuation, and cooperative relaxations of the PS/PVME blends are strongly governed by the spatial distribution of MWNTs in the blends. These findings should help guide theories and simulations of hierarchical chain dynamics in LCST mixtures containing rodlike nanoparticles.

Enzymatic degradation of polycaprolactone-gelatin blend

Blends of polycaprolactone (PCL), a synthetic polymer and gelatin, natural polymer offer a optimal combination of strength, water wettability and cytocompatibility for use as a resorbable biomaterial. The enzymatic degradation of PCL, gelatin and PCL-gelatin blended films was studied in the presence of lipase (Novozym 435, immobilized) and lysozyme. Novozym 435 degraded the PCL films whereas lysozyme degraded the gelatin. Though Novozym 435 and lysozyme individually could degrade PCL-gelatin blended films, the combination of these enzymes showed the highest degradation of these blended films. Moreover, the enzymatic degradation was much faster when fresh enzymes were added at regular intervals. The changes in physico-chemical properties of polymer films due to degradation were studied by scanning electron microscopy, Fourier transform infrared spectroscopy and differential scanning calorimetry. These results have important implications for designing resorbable biomedical implants.

Chitosan Immobilized Porous Polyolefin As Sustainable and Efficient Antibacterial Membranes

Polyolefinic membranes have attracted a great deal of interest owing to their ease of processing and chemical inertness. In this study, porous polyolefin membranes were derived by selectively etching PEO from PE/PEO (polyethylene/poly(ethylene oxide)) blends. The hydrophobic polyolefin (low density polyethylene) was treated with UV-ozone followed by dip coating in chitosan acetate solution to obtain a hydrophilic-antibacterial surface. The chitosan immobilized PE membranes were further characterized by Fourier transform infrared spectroscope (FTIR) and X-ray photoelectron spectroscope (XPS). It was found that surface grafting of chitosan onto PE membranes enhanced the surface roughness and the concentration of nitrogen (or amine) scaled with increasing concentration of chitosan (0.25 to 2% wt/vol), as inferred from Kjeldahl nitrogen analysis. The pure water flux was almost similar for chitosan immobilized PE membranes as compared to membranes without chitosan. The bacterial population, substantially reduced for membranes with higher concentration of chitosan. For instance, 90 and 94% reduction in Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) colony forming unit respectively was observed with 2% wt/vol of chitosan. This study opens new avenues in designing polyolefinic based antibacterial membranes for water purification.

Unimpeded permeation of water through biocidal graphene oxide sheets anchored on to 3D porous polyolefinic membranes

3D porous membranes were developed by etching one of the phases (here PEO, polyethylene oxide) from melt-mixed PE/PEO binary blends. Herein, we have systematically discussed the development of these membranes using X-ray micro-computed tomography. The 3D tomograms of the extruded strands and hot-pressed samples revealed a clear picture as to how the morphology develops and coarsens over a function of time during post-processing operations like compression molding. The coarsening of PE/PEO blends was traced using X-ray micro-computed tomography and scanning electron microscopy (SEM) of annealed blends at different times. It is now understood from X-ray micro-computed tomography that by the addition of a compatibilizer (here lightly maleated PE), a stable morphology can be visualized in 3D. In order to anchor biocidal graphene oxide sheets onto these 3D porous membranes, the PE membranes were chemically modified with acid/ethylene diamine treatment to anchor the GO sheets which were further confirmed by Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS) and surface Raman mapping. The transport properties through the membrane clearly reveal unimpeded permeation of water which suggests that anchoring GO on to the membranes does not clog the pores. Antibacterial studies through the direct contact of bacteria with GO anchored PE membranes resulted in 99% of bacterial inactivation. The possible bacterial inactivation through physical disruption of the bacterial cell wall and/or reactive oxygen species (ROS) is discussed herein. Thus this study opens new avenues in designing polyolefin based antibacterial 3D porous membranes for water purification.

Stiffness behaviour of injection moulded short glass fibre/impact modifier/polypropylene hybrid composites

The stiffness behaviour of injection moulded short glass fibre/impact modifier/polypropylene hybrid composites has been investigated in this work by theoretical predictions and experiments. Predictions from the self-consistent method were found to be in good agreement with test results for the impact modifier/polypropylene blends. By taking into account of the fibre orientation distributions in the skin and core layers, the values of Young's modulus for the skin and core layers were predicted by employing Eshelby's equivalent inclusion method and the average induced strain approach. The prediction of the values of Young's modulus for the whole sample was obtained by applying the simple mixture theory of laminated composites to the predicted results for the skin and core layers. Good correlation between predicted and experimental Young's modulus values were found.

Feeding and waste management strategies in the culture of Clarias gariepinus

Nutrient digestibility and amino acid availability were assessed in sharp-toothed catfish, Clarias gariepinus, fingerlings fed diets containing soyabean flour (SF) - Poultry meat meal (PMM) blends (25:75. 50:50, and 75:25) and 0.5 of 1.0%, Cr sub(2)0 sub(3). There was agreement between the pattern of overall protein digestibility and average amino acid availability despite the variability in individual amino acid availability the best dry matter, lipid and protein digestibility coefficients, and amino acid availability values were obtained with diets containing 0.5% Cr sub(2)0 sub(3). Chromic Oxide inclusion level appeared to affect nutrient availability. Increased marker level resulted into decreased nutrient digestibility coefficients. Similarly, these diets generated lower fecal crude protein than those with 1.0% Cr sub(2)0 sub(3). However, the latter group recorded higher protein retention efficiency. Dry mailer and lipid of diets containing more soyabean flour seemed to be more digestible than those of poultry meat meal. Similar trend was observed for the apparent availability of the amino acids. This investigation has indicated that low level of marker was better in digestibility study. Utilization of more SF than PMM in the diets of this catfish was more beneficial and should be encouraged in the feed industries producing catfish diets towards a better feed and waste management strategies in this aquaculture operation

Antitumor activity of Py-Im polyamides

Molecules that inhibit DNA dependent processes are the most commonly used agents for the treatment of cancer. The genotoxicity associated with their mechanisms of action, unfortunately, make them extremely toxic to the patient and cancer cells alike. The work presented in this thesis outlines the development of Py-Im polyamides as non-genotoxic DNA-targeted antitumor molecules that interfere with RNA polymerase II elongation. We initially characterized the pharmacokinetic profiles of two hairpin polyamides to establish their bioavailability in the serum and tissues after a single administration. We next determined the molecular mechanism that contributes to toxicity of a hairpin polyamide in human prostate cancer cells in cell culture and we demonstrated antitumor effects of the compound against LNCaP xenografts in mice. Finally, we conducted animal toxicity experiments on 4 polyamides that vary on the gamma-turn with respect to the substitution of amino and acetamide groups at the alpha and beta positions. From this study we identified a second generation compound that retains antitumor activity with significantly reduce animal toxicity. This work sets the foundation for the development of Py-Im polyamides as DNA targeted therapeutics for the treatment of advanced prostate cancer.

Binding site size limitations of imidazole-pyrrole polyamides for recognition in the minor groove of DNA

The discovery that the three ring polyamide Im-Py-Py-Dp containing imidazole (Im) and pyrrole (Py) carboxamides binds the DNA sequence 5'-(A,T)G(A,T)C(A,T)-3' as an antiparallel dimer offers a new model for the design of ligands for specific recognition of sequences in the minor groove containing both G,C and A,T base pairs. In Chapter 2, experiments are described in which the sequential addition of five N- methylpyrrolecarboxamides to the imidazole-pyrrole polyamide Im-Py-Py-Dp affords a series of six homologous polyamides, Im-(Py)_2-7-Dp, that differ in the size of their binding site, apparent first order binding affinity, and sequence specificity. These results demonstrate that DNA sequences up to nine base pairs in length can be specifically recognized by imidazole-pyrrole polyamides containing three to seven rings by 2:1 polyamide-DNA complex formation in the minor groove. Recognition of a nine base pair site defines the new lower limit of the binding site size that can be recognized by polyamides containing exclusively imidazole and pyrrolecarboxamides. The results of this study should provide useful guidelines for the design of new polyamides that bind longer DNA sites with enhanced affinity and specificity.

In Chapter 3 the design and synthesis of the hairpin polyamide Im-Py-Im-Py-γ-Im- Py-Im-Py-Dp is described. Quantitative DNase I footprint titration experiments reveal that Im-Py-Im-Py-γ-Im-Py-Im-Py-Dp binds six base pair 5'-(A,T)GCGC(A,T)-3' sequences with 30-fold higher affinity than the unlinked polyamide Im-Py-Im-Py-Dp. The hairpin polyamide does not discriminate between A•T and T•A at the first and sixth positions of the binding site as three sites 5'-TGCGCT-3', 5'-TGCGCA-3', and 5 'AGCGCT- 3' are bound with similar affinity. However, Im-Py-Im-Py-γ-Im-Py-Im-PyDp is specific for and discriminates between G•C and C•G base pairs in the 5'-GCGC-3' core as evidenced by lower affinities for the mismatched sites 5'-AACGCA-3', 5'- TGCGTT-3', 5'-TGCGGT-3', and 5'-ACCGCT-3'.

In Chapter 4, experiments are described in which a kinetically stable hexa-aza Schiff base La³⁺ complex is covalently attached to a Tat(49-72) peptide which has been shown to bind the HIV-1 TAR RNA sequence. Although these metallo-peptides cleave TAR site-specifically in the hexanucleotide loop to afford products consistent with hydrolysis, a series of control experiments suggests that the observed cleavage is not caused by a sequence-specifically bound Tat(49-72)-La(L)³⁺ peptide.

Sterochemically modified polyamides for recognition in the minor groove of DNA

The design of synthetic molecules that recognize specific sequences of DNA is an ongoing challenge in molecular medicine. Cell-permeable small molecules targeting predetermined DNA sequences offer a potential approach for offsetting the abnormal effects of misregulated gene-expression. Over the past twenty years, Professor Peter B. Dervan has developed a set of pairing rules for the rational design of minor groove binding polyamides containing pyrrole (Py), imidazole (Im), and hydroxypyrrole (Hp). Polyamides have illustrated the capability to permeate cells and inhibit transcription of specific genes in vivo. This provides impetus to identify structural elements that expand the repetoire of polyamide motifs with recognition properties comparable to naturally occurring DNA binding proteins. Through the introduction of chiral amino acids, we have developed chiral polyamides with stereochemically regulated binding characteristics. In addition, chiral substituents have facilitated the development of new polyamide motifs that broaden binding site sizes targetable by this class of ligands.

Remoção de metais pesados de efluentes sintéticos aquosos por nanofiltração

O objetivo deste trabalho foi estudar a remoção de metais pesados de efluentes sintéticos aquosos através de nanofiltração, com utilização de membrana de poliamida. A membrana utilizada constituída de poliamida apresentou uma boa permeabilidade hidráulica, constatada pela linearidade de fluxo com a variação de pressão de trabalho. Os metais estudados foram cobre, cádmio, zinco, chumbo e níquel com especiação de nitrato e sulfato. O desempenho do sistema foi verificado pela variação dos parâmetros operacionais (pressão e fluxo), associados também com a variação da salinidade e da concentração do metal. Em uma etapa inicial estudou-se a remoção de metais (nitrato e sulfato) isoladamente em uma mesma concentração molar, na pressão de 10 bar, comparando-se as rejeições com e sem agente complexante (EDTA). Em uma segunda etapa, estudou-se o desempenho da membrana, com misturas dos metais (nitrato) e mistura de metais (sulfato), também com e sem agente complexante, os resultados mostraram que a presença de agente complexante melhorou a rejeição dos metais. Nestas misturas estudaram-se os efeitos das concentrações (0,001; 0,0005 e 0,0001mol/L) e das pressões (5; 7; 10 e 12,5 bar) no sistema de remoção, constatou-se que o aumento da concentração e diminuição da pressão afeta a remoção. Em uma terceira etapa, estudou-se a influência da salinidade pela mistura de dois metais de mesma especiação (sulfato), comparando a remoção na pressão de 10 bar. Os resultados atestaram uma rejeição maior que 94 % para todos metais, na pressão de 10 bar, indicando um excelente desempenho e fluxo adequado, daí viabilidade de processo para todas as concentrações testadas. A pertinência do teste se justifica pela adequação do permeado ao atendimento aos padrões ambientais de concentração de metais e confirmam a eficácia do sistema de nanofiltração na remoção de metais pesados

Determinação da viscosidade de misturas assimétricas em alta pressão usando regras de mistura

O conhecimento de propriedades de transporte de misturas a diferentes pressões e temperaturas é importante em projetos, operação, controle e otimização de processos industriais. Nestes processos, frequentemente, o fluido é uma mistura binária ou multicomponente de hidrocarbonetos, como fluidos de petróleo. Propriedades experimentais de misturas, especialmente, a viscosidade absoluta como função de temperatura e pressão, podem fornecer importantes informações sobre o comportamento do fluido em diferentes composições e são usadas no desenvolvimento de modelos e correlações e na caracterização de misturas complexas. Diversas regras de mistura têm sido propostas na literatura para cálculo de viscosidade de misturas. Estas regras de mistura preveem o comportamento da mistura à pressão atmosférica usando propriedades dos componentes puros. Porém, em diversas aplicações é necessário estimar a viscosidade de misturas a altas pressões. Neste estudo, foram avaliadas regras de mistura comumente usadas como Refutas, Fator de Mistura, Índice de Mistura, Grunberg e Nissan, Kendall-Monroe e Eyring bem como Aditividade Molar, usando dados de viscosidade experimental de misturas em altas pressões. Inicialmente, foram realizadas medidas de viscosidade absoluta para a mistura altamente assimétrica de ciclohexano e n-hexadecano na faixa de temperatura entre (318,15 a 413,15) K e pressões até 62,053 MPa e, para este sistema, um modelo foi proposto para cálculo dos componentes puros para dada temperatura e pressão. Além disso, dados experimentais de viscosidade de trinta misturas cujos componentes diferem em forma, tamanho ou flexibilidade foram selecionados na literatura e modelados empregando-se regras de mistura. As viscosidades das misturas foram estimadas a partir de dados de viscosidade experimental dos componentes puros medidos nas mesmas temperaturas e pressões. A altas pressões, Refutas, Fator de Mistura e Índice de Mistura apresentaram os melhores resultados para todos os sistemas estudados. Mesmo para moléculas bastante assimétricas, Refutas, Fator de Mistura e Índice de Mistura podem ser usados.

Targeting DNA repeat sequences with Py-Im polyamides

Hairpin pyrrole-imdazole polyamides are cell-permeable, sequence-programmable oligomers that bind in the minor groove of DNA. This thesis describes studies of Py-Im polyamides targeted to biologically important DNA repeat sequences for the purpose of modulating disease states. Design of a hairpin polyamide that binds the CG dyad, a site of DNA methylation that can become dysregulated in cancer, is described. We report the synthesis of a DNA methylation antagonist, its sequence specificity and affinity informed by Bind-n-Seq and iteratively designed, which improves inhibitory activity in a cell-free assay by 1000-fold to low nanomolar IC50. Additionally, a hairpin polyamide targeted to the telomeric sequence is found to trigger a slow necrotic-type cell death with the release of inflammatory molecules in a model of B cell lymphoma. The effects of the polyamide are unique in this class of oligomers; its effects are characterized and a functional assay of phagocytosis by macrophages is described. Additionally, hairpin polyamides targeted to pathologically expanded CTG•CAG triplet repeat DNA sequences, the molecular cause of myotonic dystrophy type 1, are synthesized and assessed for toxicity. Lastly, ChIP-seq of Hypoxia-Inducible Factor is performed under hypoxia-induced conditions. The study results show that ChIP-seq can be employed to understand the genome-wide perturbation of Hypoxia-Inducible Factor occupancy by a Py-Im polyamide.

Modelagem e otimização de misturas ternárias de polipropileno (PP), borracha de etileno-propileno-dieno (EPDM) e pó de pneu (SRT).

O aumento nos rejeitos industriais e a contínua produção de resíduos causam muitas preocupações no âmbito ambiental. Neste contexto, o descarte de pneus usados tem se tornado um grande problema por conta da pequena atenção que se dá à sua destinação final. Assim sendo, essa pesquisa propõe a produção de uma mistura polimérica com polipropileno (PP), a borracha de etileno-propileno-dieno (EPDM) e o pó de pneu (SRT). A Metodologia de Superfície de Resposta (MSR), coleção de técnicas estatísticas e matemáticas úteis para desenvolver, melhorar e optimizar processos, foi aplicada à investigação das misturas ternárias. Após o processamento adequado em extrusora de dupla rosca e a moldagem por injeção, as propriedades mecânicas de resistência à tração e resistência ao impacto foram determinadas e utilizadas como variáveis resposta. Ao mesmo tempo, a microscopia eletrônica de varredura (MEV) foi usada para a investigação da morfologia das diferentes misturas e melhor interpretação dos resultados. Com as ferramentas estatísticas específicas e um número mínimo de experimentos foi possível o desenvolvimento de modelos de superfícies de resposta e a otimização das concentrações dos diferentes componentes da mistura em função do desempenho mecânico e além disso com a modificação da granulometria conseguimos um aumento ainda mais significativo deste desempenho mecânico.

Tenacificação em Nanocompósitos de Poliamida 6 e Argila

Nanocompósitos de poliamida 6 (PA6) e montmorilonita modificada com sal de amônio quaternário têm sido estudados, visando melhorar as propriedades térmicas e mecânicas. De fato os efeitos da nano-escala e da interação carga-matriz resultam em maior módulo de elasticidade e resistência à tração, porém a deformação é reduzida. Assim, nesse trabalho, optou-se por adicionar elastômeros, terpolímero de etileno-propileno-dieno (EPDM) e terpolímero de etileno-propileno-dieno modificado com anidrido maleico (EPDM-MA), ao sistema PA 6/argila organofílica para recuperar os valores de deformação. Foi utilizada montmorilonita modificada com cloreto de dimetildioctadecil amônio. A intercalação por fusão foi realizada em câmara interna de mistura. Além das propriedades mecânicas, térmicas e reológicas, foram investigadas as modificações na cristalinidade da fase PA-6 em função da adição da argila modificada, EPDM e EPDM-MA, detectando-se as variações no grau de cristalinidade e nas temperaturas de fusão e cristalização. Os difratogramas de raios-x revelaram ocorrência de intercalação/esfoliação e também modificação da forma cristalina da PA 6, indicando a formação do cristal gama

Avaliação da biodegradabilidade de misturas poliméricas de policarbonato/poli(-caprolactona) em solo simulado

Neste estudo foram avaliadas amostras de misturas poliméricas de Policarbonato (PC) e Poli--caprolactona (PCL) em diferentes concentrações após enterro em solo preparado, por períodos variando de uma a doze semanas, seguindo a Norma ASTM G 160 - 03. As amostras, após ficarem enterradas, foram retiradas do solo e analisadas por calorimetria diferencial de varredura (DSC), análise termogravimétrica (TGA), microscopia ótica (MO), microscopia eletrônica de varredura (MEV) e espectrometria de absorção na região do infravermelho com transformada de Fourier (FTIR). Foi observado através de avaliação morfológica que houve degradação nas amostras de PCL puro e na mistura PC/PCL (60/40). Para misturas com menores teores de PCL a degradação não foi significativa no tempo de avaliação sugerido pela norma. Após o tempo de 12 semanas em contato com o solo houve uma redução no teor de cristalinidade das amostras tanto de PCL puro quanto da mistura PC/PCL com 40% de PCL. As variações ocorridas devido à biodegradabilidade não foram suficientes para acarretar perda de resistência térmica nas amostras. Verificou-se que para avaliar a biodegradabilidade de misturas contendo o polímero biodegradável PCL, é necessária uma adaptação da Norma utilizada, aumentando o tempo de enterro das amostras