Математика и музика (от Питагор до Бах и до наши дни)

Georgi Dimkov - Looking at the performance of a violonist we perceive that the four strings of the instrument produces tones different pitches. It is clear that the artist presses the strings on special places and that changes the pitch. These places are determined practically by the musicians. Is it possible to determine these places theoretically, from some abstract point of view? After the legend the first successive investigations in this field were done by Pythagoras. The development of the ideas for improvement and enlargement of the results of Pythagoras is the mane topic of the present paper.

Digital Repository of Information and Knowledge - Fund “BellKnow”

The aim was to develop an archive containing detailed description of church bells. As an object of cultural heritage the bell has general properties such as geometric dimensions, weight, sound of each of the bells, the pitch of the tone as well as acoustical diagrams obtained using contemporary equipment. The audio, photo and video archive is developed by using advanced technologies for analysis, reservation and data protection.

Building OWL Ontology of Unique Bulgarian Bells Using Protégé Platform

We describe an ontological representation of data in an archive containing detailed description of church bells. As an object of cultural heritage the bell has general properties such as geometric dimensions, weight, sound of each of the bells, the pitch of the tone as well as acoustical diagrams obtained using contemporary equipment. We use Protégé platform in order to define basic ontological objects and relations between them.

A coordinated control scheme for power demand changes in a PMSG based multi-terminal DC wind farm

Although maximum power point tracking (MPPT) is crucial in the design of a wind power generation system, the necessary control strategies should also be considered for conditions that require a power reduction, called de-loading in this paper. A coordinated control scheme for a proposed current source converter (CSC) based DC wind energy conversion system is presented in this paper. This scheme combines coordinated control of the pitch angle, a DC load dumping chopper and the DC/DC converter, to quickly achieve wind farm de-loading. MATLAB/Simulink simulations and experiments are used to validate the purpose and effectiveness of the control scheme, both at the same power level. © 2013 IEEE.

Permanent magnet synchronous generator based wind power generation system fault protection schemes

The PMSG-based wind power generation system protection is presented in this paper. For large-scale systems, a voltagesource converter rectifier is included. Protection circuits for this topology are studied with simulation results for cable permanent fault conditions. These electrical protection methods are all in terms of dumping redundant energy resulting from disrupted path of power delivery. Pitch control of large-scale wind turbines are considered for effectively reducing rotor shaft overspeed. Detailed analysis and calculation of damping power and resistances are presented. Simulation results including fault overcurrent, DC-link overvoltage and wind turbine overspeed are shown to illustrate the system responses under different protection schemes to compare their application and effectiveness.

Step and flash imprint lithography: Fabrication of patterned media for extremely high density magnetic data storage devices

Currently the data storage industry is facing huge challenges with respect to the conventional method of recording data known as longitudinal magnetic recording. This technology is fast approaching a fundamental physical limit, known as the superparamagnetic limit. A unique way of deferring the superparamagnetic limit incorporates the patterning of magnetic media. This method exploits the use of lithography tools to predetermine the areal density. Various nanofabrication schemes are employed to pattern the magnetic material are Focus Ion Beam (FIB), E-beam Lithography (EBL), UV-Optical Lithography (UVL), Self-assembled Media Synthesis and Nanoimprint Lithography (NIL). Although there are many challenges to manufacturing patterned media, the large potential gains offered in terms of areal density make it one of the most promising new technologies on the horizon for future hard disk drives. Thus, this dissertation contributes to the development of future alternative data storage devices and deferring the superparamagnetic limit by designing and characterizing patterned magnetic media using a novel nanoimprint replication process called "Step and Flash Imprint lithography". As opposed to hot embossing and other high temperature-low pressure processes, SFIL can be performed at low pressure and room temperature. Initial experiments carried out, consisted of process flow design for the patterned structures on sputtered Ni-Fe thin films. The main one being the defectivity analysis for the SFIL process conducted by fabricating and testing devices of varying feature sizes (50 nm to 1 μm) and inspecting them optically as well as testing them electrically. Once the SFIL process was optimized, a number of Ni-Fe coated wafers were imprinted with a template having the patterned topography. A minimum feature size of 40 nm was obtained with varying pitch (1:1, 1:1.5, 1:2, and 1:3). The Characterization steps involved extensive SEM study at each processing step as well as Atomic Force Microscopy (AFM) and Magnetic Force Microscopy (MFM) analysis.

The effects of a General Instructional Strategies course on the utilization of effective instructional strategies by teachers

The focus of this study was to explain the extent to which theoretically effective teaching strategies taught in a course on generic instructional strategies are being implemented by teachers in their actual teaching practice. ^ A multivariate causal-comparative (ex-post-facto) design was used to answer the research question. A teacher observation protocol, the General Instructional Strategies Analysis (GISA) was constructed and used to assess the utilization of instructional strategies in the classroom. The data of this study also included open-ended field notes taken during observations. ^ Multivariate Analyses of Variance (MANOVA) was used to compare the teaching strategies (set, effective explanation, hands-on activity, cooperative learning activity, higher order questioning, closure) of the group who had taken a general instructional strategies course (N=36) and the group who had not (N=36). Results showed a statistically significant difference between the two groups. The group who had taken the course implemented these strategies more effectively in almost all categories of effective teaching. Follow-up univariate tests of the dependent variables showed significant differences between the two groups in five of the six areas (hands-on activity being an exception). A second MANOVA compared the two groups on the effective use of attending behaviors (teacher movement/eye contact/body language/physical space, brief verbal acknowledgements/voice inflection/modulation/pitch, use of visuals, prompting/probing, praise/feedback/rewards, wait-time I and II). Results also showed a multivariate difference between the two groups. Follow-up univariate tests on the related dependent variables showed that five of the six were significantly different between the two groups. The group who had taken the course implemented the strategies more effectively. An analysis of the field notes provided further evidence regarding the pervasiveness of these differences between the teaching practices of the two groups. ^ It was concluded that taking a course in general instructional strategies increases the utilization of effective strategies in the classroom by teachers. ^

Tests of the Intersensory Redundancy Hypothesis across early postnatal development

The Intersensory Redundancy Hypothesis (IRH; Bahrick & Lickliter, 2000, 2002, 2012) predicts that early in development information presented to a single sense modality will selectively recruit attention to modality-specific properties of stimulation and facilitate learning of those properties at the expense of amodal properties (unimodal facilitation). Vaillant (2010) demonstrated that bobwhite quail chicks prenatally exposed to a maternal call alone (unimodal stimulation) are able to detect a pitch change, a modality-specific property, in subsequent postnatal testing between the familiarized call and the same call with altered pitch. In contrast, chicks prenatally exposed to a maternal call paired with a temporally synchronous light (redundant audiovisual stimulation) were unable to detect a pitch change. According to the IRH (Bahrick & Lickliter, 2012), as development proceeds and the individual's perceptual abilities increase, the individual should detect modality-specific properties in both nonredundant, unimodal and redundant, bimodal conditions. However, when the perceiver is presented with a difficult task, relative to their level of expertise, unimodal facilitation should become evident. The first experiment of the present study exposed bobwhite quail chicks 24 hr after hatching to unimodal auditory, nonredundant audiovisual, or redundant audiovisual presentations of a maternal call for 10min/hr for 24 hours. All chicks were subsequently tested 24 hr after the completion of the stimulation (72 hr following hatching) between the familiarized maternal call and the same call with altered pitch. Chicks from all experimental groups (unimodal, nonredundant audiovisual, and redundant audiovisual exposure) significantly preferred the familiarized call over the pitch-modified call. The second experiment exposed chicks to the same exposure conditions, but created a more difficult task by narrowing the pitch range between the two maternal calls with which they were tested. Chicks in the unimodal and nonredundant audiovisual conditions demonstrated detection of the pitch change, whereas the redundant audiovisual exposure group did not show detection of the pitch change, providing evidence of unimodal facilitation. These results are consistent with predictions of the IRH and provide further support for the effects of unimodal facilitation and the role of task difficulty across early development.

A heuristic algorithm to generate test program sequences for moving probe electronic test equipment

The electronics industry, is experiencing two trends one of which is the drive towards miniaturization of electronic products. The in-circuit testing predominantly used for continuity testing of printed circuit boards (PCB) can no longer meet the demands of smaller size circuits. This has lead to the development of moving probe testing equipment. Moving Probe Test opens up the opportunity to test PCBs where the test points are on a small pitch (distance between points). However, since the test uses probes that move sequentially to perform the test, the total test time is much greater than traditional in-circuit test. While significant effort has concentrated on the equipment design and development, little work has examined algorithms for efficient test sequencing. The test sequence has the greatest impact on total test time, which will determine the production cycle time of the product. Minimizing total test time is a NP-hard problem similar to the traveling salesman problem, except with two traveling salesmen that must coordinate their movements. The main goal of this thesis was to develop a heuristic algorithm to minimize the Flying Probe test time and evaluate the algorithm against a "Nearest Neighbor" algorithm. The algorithm was implemented with Visual Basic and MS Access database. The algorithm was evaluated with actual PCB test data taken from Industry. A statistical analysis with 95% C.C. was performed to test the hypothesis that the proposed algorithm finds a sequence which has a total test time less than the total test time found by the "Nearest Neighbor" approach. Findings demonstrated that the proposed heuristic algorithm reduces the total test time of the test and, therefore, production cycle time can be reduced through proper sequencing.

Processed 2 minutes-averaged continuous VM-ADCP (vessel-mounted Acoustic Doppler Current Profiler) profiles during POLARSTERN cruise ANT-XXVIII/3

This data set was obtained during the R. V. POLARSTERN cruise ANT-XXVIII/3. Current velocities were measured nearly continuously when outside territorial waters along the ship's track with a vessel-mounted TRD Instruments' 153.6-kHz Ocean Surveyor ADCP. The transducers were located 11 m below the water line and were protected against ice floes by an acoustically transparent plastic window. The current measurements were made using a pulse of 2s and vertical bin length of 4 m. The ship's velocity was calculated from position fixes obtained by the Global Positioning System (GPS). Heading, roll and pitch data from the ship's gyro platforms and the navigation data were used to convert the ADCP velocities into earth coordinates. Accuracy of the ADCP velocities mainly depends on the quality of the position fixes and the ship's heading data. Further errors stem from a misalignment of the transducer with the ship's centerline. The ADCP data were processed using the Ocean Surveyor Sputum Interpreter (OSSI) software developed by GEOMAR Helmholtz-Zentrum für Ozeanforschung Kiel. The averaging interval was set to 120 seconds. The reference layer was set to bins 5 to 16 avoiding near surface effects and biases near bin 1. Sampling interval setting: 2s; Number of bins: 80; Bin length: 4m; Pulse length: 4m; Blank beyond transmit length: 4m. Data processing setting: Top reference bin: 5; Bottom reference bin: 16; Average: 120s; Misalignment amplitude: 1.0276 +/- 0.1611, phase: 0.8100 +/- 0.7190. The precision for single ping and 4m cell size reported by TRDI is 0.30m/s. Resulting from the single ping precision and the number of pings (most of the time 36) during 120seconds the velocity accuracy is nearly 0.05m/s. (Velocity accuracy = single ping precision divided by square root of the number of pings).

Explorando a execução de técnicas estendidas no oboé encontradas em quatro peças contemporâneas

This dissertation presents an investigation of the evolutionary process of extended oboe techniques, through literary analysis and practical research. The objective of this work is to provide assistance to oboists interested in learning these techniques. Additionally, this work encourages the student, through the process of experimentation, to explore the questions that may arise around the aesthetics of sound, the concept of gesture as an additional visual and aural element in music, and the collaboration and “real-time” creation processes. Discussed within the work, are the relationship between the instrument (the oboe) and extended techniques, and two possible definitions of extended techniques, provided by Luk Vaes (2009) and Gardner Read (1993). Also explored are the how and why some composers have utilized extended techniques in their compositions, including brief discussions relating to extended techniques in real-time composition (improvisation), extended techniques and technological resources, theatrical gesture as an extended technique, and suggestions of how musicians might approach theatrical gestures in performance. Four works were visited: “I Know This Room So Well” – Lisa Bielawa (2007-9); “Four Pieces for Oboe and Piano” – Ernst Krenek (1966); “In Freundschaft” – Karlheinz Stockhausen (1978); “Atem” – Mauricio Kagel (1969-70); and an exploration of the difficulties and solutions associated with each extended technique found within these pieces, was carried out. The following founding works on extended oboe techniques were used, as a basis for research: books - Heinz Holliger’s Pro Musica Nova (1972); Gardner Read’s Compendium of Modern Instrumental Techniques (1993); Peter Veale & Claus-Steffen Mahnkopf’s The Techniques of Oboe Playing (1994); and Libby Van Cleve’s Oboe Unbound: Contemporary Techniques (2004); and articles - Nora Post’s “Monophonic sound resources for the oboe: Part I – Timbre” (1984), “Part II- Pitch and other techniques” (1984), and “Multiphonics for the oboe” (1982).

Sociophonetic deception: the elements of vocal disguise

The focus of my research is vocal disguise within forensic linguistics. Specifically, I answer the question of what individuals are most likely to do with their voice when they do not want to be recognized by a listener. I also focus on whether specific sociolinguistic characteristics – gender and place of origin – have an effect on the disguise choices that individuals make. My research has found that participants show a preference for altering pitch and/or duration across conditions, as well as taking on a foreign accent. Gender and origin were found to be significant for respect to differences in duration, and significance was also found between origin and pitch. These results suggest that disguise might contain elements of style shifting, and that a speaker's choice is more systematic than random.

Active suspension development based on energy analysis

This research focuses on developing active suspension optimal controllers for two linear and non-linear half-car models. A detailed comparison between quarter-car and half-car active suspension approaches is provided for improving two important scenarios in vehicle dynamics, i.e. ride quality and road holding. Having used a half-car vehicle model, heave and pitch motion are analyzed for those scenarios, with cargo mass as a variable. The governing equations of the system are analysed in a multi-energy domain package, i.e., 20-Sim. System equations are presented in the bond-graph language to facilitate calculation of energy usage. The results present optimum set of gains for both ride quality and road holding scenarios are the gains which has derived when maximum allowable cargo mass is considered for the vehicle. The energy implications of substituting passive suspension units with active ones are studied by considering not only the energy used by the actuator, but also the reduction in energy lost through the passive damper. Energy analysis showed less energy was dissipated in shock absorbers when either quarter-car or half-car controllers were used instead of passive suspension. It was seen that more energy could be saved by using half-car active controllers than the quarter-car ones. Results also proved that using active suspension units, whether quarter-car or half-car based, under those realistic limitations is energy-efficient and suggested.

A mathematical model for the maneuvering simulation of a propelled SPAR vessel

To predict the maneuvering performance of a propelled SPAR vessel, a mathematical model was established as a path simulator. A system-based mathematical model was chosen as it offers advantages in cost and time over full Computational Fluid Dynamics (CFD) simulations. The model is intended to provide a means of optimizing the maneuvering performance of this new vessel type. In this study the hydrodynamic forces and control forces are investigated as individual components, combined in a vectorial setting, and transferred to a body-fixed basis. SPAR vessels are known to be very sensitive to large amplitude motions during maneuvers due to the relatively small hydrostatic restoring forces. Previous model tests of SPAR vessels have shown significant roll and pitch amplitudes, especially during course change maneuvers. Thus, a full 6 DOF equation of motion was employed in the current numerical model. The mathematical model employed in this study was a combination of the model introduced by the Maneuvering Modeling Group (MMG) and the Abkowitz (1964) model. The new model represents the forces applied to the ship hull, the propeller forces and the rudder forces independently, as proposed by the MMG, but uses a 6DOF equation of motion introduced by Abkowitz to describe the motion of a maneuvering ship. The mathematical model was used to simulate the trajectory and motions of the propelled SPAR vessel in 10˚/10˚, 20˚/20˚ and 30˚/30˚ standard zig-zag maneuvers, as well as turning circle tests at rudder angles of 20˚ and 30˚. The simulation results were used to determine the maneuverability parameters (e.g. advance, transfer and tactical diameter) of the vessel. The final model provides the means of predicting and assessing the performance of the vessel type and can be easily adapted to specific vessel configurations based on the generic SPAR-type vessel used in this study.

Modelagem e análise dinâmica de um sistema de conversão de energia eólica dotado de gerador síncrono de imã permanente utilizando a plataforma ATP

Human development requires a broad balance between ecological, social and economic factors in order to ensure its own sustainability. In this sense, the search for new sources of energy generation, with low deployment and operation costs, which cause the least possible impact to the environment, has been the focus of attention of all society segments. To do so, the reduction in exploration of fossil fuels and the encouragement of using renewable energy resources for distributed generation have proved interesting alternatives to the expansion of the energy matrix of various countries in the world. In this sense, the wind energy has acquired an increasingly significant role, presenting increasing rates of power grid penetration and highlighting technological innovations such as the use of permanent magnet synchronous generators (PMSG). In Brazil, this fact has also been noted and, as a result, the impact of the inclusion of this source in the distribution and sub-transmission power grid has been a major concern of utilities and agents connected to Brazilian electrical sector. Thus, it is relevant the development of appropriate computational tools that allow detailed predictive studies about the dynamic behavior of wind farms, either operating with isolated load, either connected to the main grid, taking also into account the implementation of control strategies for active/reactive power generation and the keeping of adequate levels of voltage and frequency. This work fits in this context since it comprises mathematical and computational developments of a complete wind energy conversion system (WECS) endowed with PMSG using time domain techniques of Alternative Transients Program (ATP), which prides itself a recognized reputation by scientific and academic communities as well as by electricity professionals in Brazil and elsewhere. The modeling procedures performed allowed the elaboration of blocks representing each of the elements of a real WECS, comprising the primary source (the wind), the wind turbine, the PMSG, the frequency converter, the step up transformer, the load composition and the power grid equivalent. Special attention is also given to the implementation of wind turbine control techniques, mainly the pitch control responsible for keeping the generator under the maximum power operation point, and the vector theory that aims at adjusting the active/reactive power flow between the wind turbine and the power grid. Several simulations are performed to investigate the dynamic behavior of the wind farm when subjected to different operating conditions and/or on the occurrence of wind intensity variations. The results have shown the effectiveness of both mathematical and computational modeling developed for the wind turbine and the associated controls.