Applying precision feeding techniques in growing-finishing pig operations

The high cost of feed ingredients, the use of non-renewable sources of phosphate and the dramatic increase in the environmental load resulting from the excessive land application of manure are major challenges for the livestock industry. Precision feeding is proposed as an essential approach to improve the utilization of dietary nitrogen, phosphorus and other nutrients and thus reduce feeding costs and nutrient excretion. Precision feeding requires accurate knowledge of the nutritional value of feedstuffs and animal nutrient requirements, the formulation of diets in accordance with environmental constraints, and the gradual adjustment of the dietary nutrient supply to match the requirements of the animals. After the nutritional potential of feed ingredients has been precisely determined and has been improved by the addition of enzymes (e.g. phytases) or feed treatments, the addition of environmental objectives to the traditional feed formulation algorithms can promote the sustainability of the swine industry by reducing nutrient excretion in swine operations with small increases in feeding costs. Increasing the number of feeding phases can also contribute to significant reductions in nutrient excretion and feeding costs. However, the use of precision feeding techniques in which pigs are fed individually with daily tailored diets can further improve the efficiency with which pigs utilize dietary nutrients. Precision feeding involves the use of feeding techniques that allow the provision of the right amount of feed with the right composition at the right time to each pig in the herd. Using this approach, it has been estimated that feeding costs can be reduced by more than 4.6%, and nitrogen and phosphorus excretion can both be reduced by more than 38%. Moreover, the integration of precision feeding techniques into large-group production systems can provide real-time off-farm monitoring of feed and animals for optimal slaughter and production strategies, thus improving the environmental sustainability of pork production, animal well-being and meat-product quality.

Haja-asutusalueiden jätevesien käsittelyn tulevaisuus

Tässä työssä tarkastellaan haja-asutusalueilla käytössä olevia kiinteistökohtaisia jäteveden käsittelymenetelmiä. Koelaitteistona oli biologinen pienpuhdistamo, jonka toimintaa tutkittiin tavanomaisessa kotitalouskäytössä. Tarkoituksena oli selvittää jäteveden biologisen suodatuksen soveltuvuutta haja-asutuksen jätevesien käsittelyyn. Kirjallisuusosiossa käsitellään haja-asutuksen jätevesien aiheuttamia ympäristövaikutuksia, ympäristölainsäädäntöä ja yleisesti käytössä olevia erilaisia jäteveden käsittelymenetelmiä, sekä vaihtoehtoisia käymäläratkaisuja. Ennen kokeellisen osuuden alkua asennettiin pienpuhdistamo oheislaitteineen omakotitalon viemärijärjestelmään. Tämän jälkeen päästiin tutkimaan puhdistamon puhdistustehokkuutta ja ympäristökuormitusta lähtevästä jätevedestä keräilynäyttein. Puhdistamolta lähtevän jäteveden kuormitusarvoja verrattiin Ympäristöministeriössä suunnitteilla oleviin enimmäisrajoihin: BOD7 5 g/(d,as), kokonaisfosfori 0,33 g/(d,as) ja kokonaistyppi 8,4 g/(d,as). Mitatut BOD7- ja kokonaistyppikuormitukset alittivat raja-arvot kerran. Muilla mittauskerroilla kuormitus oli enimmäisrajoja suurempi. Kokonaisfosforikuormitus oli kaikilla mittauskerroilla moninkertainen enimmäisrajaan verrattuna. Puhdistamon todellinen BOD7-reduktio oli noin 60 %. Kokonaisfosforin ja kokonaistypen reduktiot vaihtelivat paljon ollen kokonaisfosforilla korkeimmillaan 12 % ja kokonaistypellä 29 %.

Puunpolton mahdollisuudet Suomenojan voimalaitoksella

Puuenergian käyttö on viime vuosina lisääntynyt kaukolämmön tuotannossa sekä yhdistetyssä sähkön ja lämmön tuotannossa. Puun kilpailukykyä polttoaineena ovat lisänneet polttotekniikan ja korjuutekniikoiden kehittyminen. Puun energiakäyttöä on edistänyt myös valtiovalta tukien ja veroratkaisuiden avulla, koska fossiilisten polttoaineiden korvaaminen puupolttoaineilla tukee Suomen ilmastopoliittisia tavoitteita. Tämän työn tavoitteena oli selvittää puupolttoaineiden käytön mahdollisuudet Espoon Sähkön Suomenojan voimalaitoksella. Nykyiset Suomenojan pääpolttoaineet ovat kivihiili ja maakaasu. Suomenojalle toimitetut puupolttoaineet koostuisivat sahoilta saatavista sivutuotteista, metsätähdehakkeesta ja kierrätyspuusta. Puupolttoaineiden taloudellinen saatavuus vaihtelee alueittain huomattavasti. Espoo ei tässä suhteessa ole sijainniltaan edullinen. Saatujen polttoainetarjousten perusteella puunpolton kustannukset nousevat kivihiilen kustannuksia korkeammiksi kuljetusetäisyyksistä johtuen, kun puunpoltto on yli 300 GWh/a. Tämä vastaisi 10 prosenttia Espoon Sähkön vuoden 2000 kokonaispolttoainekäytöstä ja 8 prosenttia arvioidusta polttoaineiden käytöstä vuodelle 2010. Puuta voidaan polttaa leijukerrostekniikkaan perustuvissa kattiloissa, arinakattiloissa, pölypolttona tai kaasuttamalla ja johtamalla tuotekaasu poltettavaksi. Puun ravinneaineista kloori voi aiheuttaa kuumakorroosiota höyrykattiloiden tulistimissa. Tätä pyritään estämään seospoltolla rikkipitoisten polttoaineiden, kuten turpeen tai kivihiilen kanssa. Seospoltto muiden polttoaineiden kanssa parantaa myös puun palamistulosta. Puupolttoaineiden kosteus voi olla jopa 60 prosenttia. Tässä työssä tutkittiin puun energiakäytölle pääasiassa kuutta eri ratkaisua. Ne olivat: kaasuttimen rakentaminen ja tuotekaasun poltto nykyisessä hiilipölykattilassa, hiilipölykattilan muuttaminen leijukerrospolttoon, uuden vastapainevoimalaitoksen rakentaminen, Suomenojalla olevan hiilivesikattilan muuttaminen puupolttoaineille, kivihiilen ja puun yhteispoltto hiilipölykattilassa puu/hiilipölypolttimilla sekä leijukerroskattilan rakentaminen ja sen yhdistäminen olemassa olevaan höyryturbiiniin. Taloudellisesti kannattaviksi ratkaisuiksi osoittautui kaksi viimeksi mainittua. Jos voimalaitostonttia halutaan säästää myöhempää maakaasuvoimalaitoshanketta varten, nousee puun ja kivihiilen yhteispoltto puu/hiilipölypolttimilla oleellisesti paremmaksi vaih-toehdoksi. Tämän vaihtoehdon korollinen takaisinmaksuaika on 7-11 vuotta, riippuen puunpolton laajuudesta. Kannattavuudelle on hyvin tärkeää puulla tuotetun sähkön tuki. Yhteispolton ansiosta hiilipölykattilan rikkidioksidi- ja hiilidioksidipäästöt sekä mahdollisesti myös typenoksidipäästöt vähenisivät. Puunpoltto lisää savukaasuvirtaa, nostaa savukaasun loppulämpötilaa ja mahdollisesti laskee hyötysuhdetta. Laitoksen rekkaliikenne lisääntyy. Kaikki esitetyt ratkaisuvaihtoehdot vähentäisivät hiilidioksidipäästöjä. Puunpolttoratkaisuilla ei kuitenkaan pystytä vähentämään Espoon Sähkön energiantuotannon hiilidioksidipäästöjä alle vuoden 1990 tason, mutta hiilidioksidin ominaispäästöissä edellä mainitun tason alle päästäisiin.

Use of alternative and complementary therapies in labor and delivery care: a cross-sectional study of midwives" training in Catalan hospitals accredited as centers for normal birth

Background: The use of complementary and alternative medicine (CAM) and complementary and alternative therapies (CAT) during pregnancy is increasing. Scientific evidence for CAM and CAT in the field of obstetrics mainly covers pain relief in labor. Midwives are responsible for labor and delivery care: hence, their knowledge of CAM and CAT is important. The aims of this study are to describe the professional profile of midwives who provide care for natural childbirth in Catalan hospitals accredited as centers for normal birth, to assess midwives" level of training in CAT and their use of these therapies, and to identify specific resources for CAT in labor wards. Methods: A descriptive, cross-sectional, quantitative method was used to assess the level of training and use of CAT by midwives working at 28 hospitals in Catalonia, Spain, accredited as public normal birth centers. Results: Just under a third of midwives (30.4%) trained in CAT after completion of basic training. They trained in an average of 5.97 therapies (SD 3.56). The number of CAT in which the midwives were trained correlated negatively with age (r = - 0.284; p < 0.001) and with their time working at the hospital in years (r = - 0.136; p = 0.036). Midwives trained in CAT considered that the following therapies were useful or very useful for pain relief during labor and delivery: relaxation techniques (64.3%), hydrotherapy (84.8%) and the application of compresses to the perineum (75.9%). The availability of resources for providing CAT during normal birth care varied widely from center to center. Conclusions: Age may influence attitudes towards training. It is important to increase the number of midwives trained in CAM for pain relief during childbirth, in order to promote the use of CAT and ensure efficiency and safety. CAT resources at accredited hospitals providing normal childbirth care should also be standardized.

Use of alternative and complementary therapies in labor and delivery care: a cross-sectional study of midwives" training in Catalan hospitals accredited as centers for normal birth

Background: The use of complementary and alternative medicine (CAM) and complementary and alternative therapies (CAT) during pregnancy is increasing. Scientific evidence for CAM and CAT in the field of obstetrics mainly covers pain relief in labor. Midwives are responsible for labor and delivery care: hence, their knowledge of CAM and CAT is important. The aims of this study are to describe the professional profile of midwives who provide care for natural childbirth in Catalan hospitals accredited as centers for normal birth, to assess midwives" level of training in CAT and their use of these therapies, and to identify specific resources for CAT in labor wards. Methods: A descriptive, cross-sectional, quantitative method was used to assess the level of training and use of CAT by midwives working at 28 hospitals in Catalonia, Spain, accredited as public normal birth centers. Results: Just under a third of midwives (30.4%) trained in CAT after completion of basic training. They trained in an average of 5.97 therapies (SD 3.56). The number of CAT in which the midwives were trained correlated negatively with age (r = - 0.284; p < 0.001) and with their time working at the hospital in years (r = - 0.136; p = 0.036). Midwives trained in CAT considered that the following therapies were useful or very useful for pain relief during labor and delivery: relaxation techniques (64.3%), hydrotherapy (84.8%) and the application of compresses to the perineum (75.9%). The availability of resources for providing CAT during normal birth care varied widely from center to center. Conclusions: Age may influence attitudes towards training. It is important to increase the number of midwives trained in CAM for pain relief during childbirth, in order to promote the use of CAT and ensure efficiency and safety. CAT resources at accredited hospitals providing normal childbirth care should also be standardized.

Gas-phase photocatalytic oxidation of volatile organic compounds

Substances emitted into the atmosphere by human activities in urban and industrial areas cause environmental problems such as air quality degradation, respiratory diseases, climate change, global warming, and stratospheric ozone depletion. Volatile organic compounds (VOCs) are major air pollutants, emitted largely by industry, transportation and households. Many VOCs are toxic, and some are considered to be carcinogenic, mutagenic, or teratogenic. A wide spectrum of VOCs is readily oxidized photocatalytically. Photocatalytic oxidation (PCO) over titanium dioxide may present a potential alternative to air treatment strategies currently in use, such as adsorption and thermal treatment, due to its advantageous activity under ambient conditions, although higher but still mild temperatures may also be applied. The objective of the present research was to disclose routes of chemical reactions, estimate the kinetics and the sensitivity of gas-phase PCO to reaction conditions in respect of air pollutants containing heteroatoms in their molecules. Deactivation of the photocatalyst and restoration of its activity was also taken under consideration to assess the practical possibility of the application of PCO to the treatment of air polluted with VOCs. UV-irradiated titanium dioxide was selected as a photocatalyst for its chemical inertness, non-toxic character and low cost. In the present work Degussa P25 TiO2 photocatalyst was mostly used. In transient studies platinized TiO2 was also studied. The experimental research into PCO of following VOCs was undertaken: - methyl tert-butyl ether (MTBE) as the basic oxygenated motor fuel additive and, thus, a major non-biodegradable pollutant of groundwater; - tert-butyl alcohol (TBA) as the primary product of MTBE hydrolysis and PCO; - ethyl mercaptan (ethanethiol) as one of the reduced sulphur pungent air pollutants in the pulp-and-paper industry; - methylamine (MA) and dimethylamine (DMA) as the amino compounds often emitted by various industries. The PCO of VOCs was studied using a continuous-flow mode. The PCO of MTBE and TBA was also studied by transient mode, in which carbon dioxide, water, and acetone were identified as the main gas-phase products. The volatile products of thermal catalytic oxidation (TCO) of MTBE included 2-methyl-1-propene (2-MP), carbon monoxide, carbon dioxide and water; TBA decomposed to 2-MP and water. Continuous PCO of 4 TBA proceeded faster in humid air than dry air. MTBE oxidation, however, was less sensitive to humidity. The TiO2 catalyst was stable during continuous PCO of MTBE and TBA above 373 K, but gradually lost activity below 373 K; the catalyst could be regenerated by UV irradiation in the absence of gas-phase VOCs. Sulphur dioxide, carbon monoxide, carbon dioxide and water were identified as ultimate products of PCO of ethanethiol. Acetic acid was identified as a photocatalytic oxidation by-product. The limits of ethanethiol concentration and temperature, at which the reactor performance was stable for indefinite time, were established. The apparent reaction kinetics appeared to be independent of the reaction temperature within the studied limits, 373 to 453 K. The catalyst was completely and irreversibly deactivated with ethanethiol TCO. Volatile PCO products of MA included ammonia, nitrogen dioxide, nitrous oxide, carbon dioxide and water. Formamide was observed among DMA PCO products together with others similar to the ones of MA. TCO for both substances resulted in the formation of ammonia, hydrogen cyanide, carbon monoxide, carbon dioxide and water. No deactivation of the photocatalyst during the multiple long-run experiments was observed at the concentrations and temperatures used in the study. PCO of MA was also studied in the aqueous phase. Maximum efficiency was achieved in an alkaline media, where MA exhibited high fugitivity. Two mechanisms of aqueous PCO – decomposition to formate and ammonia, and oxidation of organic nitrogen directly to nitrite - lead ultimately to carbon dioxide, water, ammonia and nitrate: formate and nitrite were observed as intermediates. A part of the ammonia formed in the reaction was oxidized to nitrite and nitrate. This finding helped in better understanding of the gasphase PCO pathways. The PCO kinetic data for VOCs fitted well to the monomolecular Langmuir- Hinshelwood (L-H) model, whereas TCO kinetic behaviour matched the first order process for volatile amines and the L-H model for others. It should be noted that both LH and the first order equations were only the data fit, not the real description of the reaction kinetics. The dependence of the kinetic constants on temperature was established in the form of an Arrhenius equation.

Epigenetic regulatory elements: Recent advances in understanding their mode of action and use for recombinant protein production in mammalian cells.

Successful generation of high producing cell lines requires the generation of cell clones expressing the recombinant protein at high levels and the characterization of the clones' ability to maintain stable expression levels. The use of cis-acting epigenetic regulatory elements that improve this otherwise long and uncertain process has revolutionized recombinant protein production. Here we review and discuss new insights into the molecular mode of action of the matrix attachment regions (MARs) and ubiquitously-acting chromatin opening elements (UCOEs), i.e. cis-acting elements, and how these elements are being used to improve recombinant protein production. These elements can help maintain the chromatin environment of the transgene genomic integration locus in a transcriptionally favorable state, which increases the numbers of positive clones and the transgene expression levels. Moreover, the high producing clones tend to be more stable in long-term cultures even in the absence of selection pressure. Therefore, by increasing the probability of isolating a high producing clone, as well as by increasing transcription efficiency and stability, these elements can significantly reduce the time and cost required for producing large quantities of recombinant proteins.

The efficiency of indicator groups for the conservation of amphibians in the Brazilian Atlantic Forest

The adequate selection of indicator groups of biodiversity is an important aspect of the systematic conservation planning. However, these assessments differ in the spatial scale, in the methods used and in the groups considered to accomplish this task, which generally produces contradictory results. The quantification of the spatial congruence between species richness and complementarity among different taxonomic groups is a fundamental step to identify potential indicator groups. Using a constructive approach, the main purposes of this study were to evaluate the performance and efficiency of eight potential indicator groups representing amphibian diversity in the Brazilian Atlantic Forest. Data on the geographic range of amphibian species that occur in the Brazilian Atlantic Forest was overlapped to the full geographic extent of the biome, which was divided into a regular equal-area grid. Optimization routines based on the concept of complementarily were applied to verify the performance of each indicator group selected in relation to the representativeness of the amphibians in the Brazilian Atlantic Forest as a whole, which were solved by the algorithm"simulated annealing", through the use of the software MARXAN. Some indicator groups were substantially more effective than others in regards to the representation of the taxonomic groups assessed, which was confirmed by the high significance of data (F = 312.76; p < 0.01). Leiuperidae was considered as the best indicator group among the families analyzed, as it showed a good performance, representing 71% of amphibian species in the Brazilian Atlantic Forest (i.e. 290 species), which may be associated with the diffuse geographic distribution of its species. This study promotes understanding of how the diversity standards of amphibians can be informative for systematic conservation planning on a regional scale.

Analyzing the temporal regulation of translation efficiency in mouse liver.

Mammalian physiology and behavior follow daily rhythms that are orchestrated by endogenous timekeepers known as circadian clocks. Rhythms in transcription are considered the main mechanism to engender rhythmic gene expression, but important roles for posttranscriptional mechanisms have recently emerged as well (reviewed in Lim and Allada (2013) [1]). We have recently reported on the use of ribosome profiling (RPF-seq), a method based on the high-throughput sequencing of ribosome protected mRNA fragments, to explore the temporal regulation of translation efficiency (Janich et al., 2015 [2]). Through the comparison of around-the-clock RPF-seq and matching RNA-seq data we were able to identify 150 genes, involved in ribosome biogenesis, iron metabolism and other pathways, whose rhythmicity is generated entirely at the level of protein synthesis. The temporal transcriptome and translatome data sets from this study have been deposited in NCBI's Gene Expression Omnibus under the accession number GSE67305. Here we provide additional information on the experimental setup and on important optimization steps pertaining to the ribosome profiling technique in mouse liver and to data analysis.

Enhancing the efficiency of freight transport by using simulation

The role of transport in the economy is twofold. As a sector of economic activity it contributes to a share of national income. On the other hand, improvements in transport infrastructure create room for accelerated economic growth. As a means to support railways as a safe and environmentally friendly transportation mode, the EU legislation has required the opening of domestic railway freight for competition from beginning of year 2007. The importance of railways as a mode of transport has been great in Finland, as a larger share of freight has been carried on rails than in Europe on average. In this thesis it is claimed that the efficiency of goods transport can be enhanced by service specific investments. Furthermore, it is stressed that simulation can and should be used to evaluate the cost-efficiency of transport systems on operational level, as well as to assess transportation infrastructure investments. In all the studied cases notable efficiency improvements were found. For example in distribution, home delivery of groceries can be almost twice as cost efficient as the current practice of visiting the store. The majority of the cases concentrated on railway freight. In timber transportation, the item with the largest annual transport volume in domestic railway freight in Finland, the transportation cost could be reduced most substantially. Also in international timber procurement, the utilization of railway wagons could be improved by combining complementary flows. The efficiency improvements also have positive environmental effects; a large part of road transit could be moved to rails annually. If impacts of freight transport are included in cost-benefit analysis of railway investments, up to 50 % increase in the net benefits of the evaluated alternatives can be experienced, avoiding a possible inbuilt bias in the assessment framework, and thus increasing the efficiency of national investments in transportation infrastructure. Transportation systems are a typical example of complex real world systems that cannot be analysed realistically by analytical methods, whereas simulation allows inclusion of dynamics and the level of detail required. Regarding simulation as a viable tool for assessing the efficiency of transportation systems finds support also in the international survey conducted for railway freight operators; operators use operations research methods widely for planning purposes, while simulation is applied only by the larger operators.

Energy efficiency determinants: An empirical analysis of Spanish innovative firms

This paper examines the extent to which innovative Spanish firms pursue improvements in energy efficiency (EE) as an objective of innovation. The increase in energy consumption and its impact on greenhouse gas emissions justifies the greater attention being paid to energy efficiency and especially to industrial EE. The ability of manufacturing companies to innovate and improve their EE has a substantial influence on attaining objectives regarding climate change mitigation. Despite the effort to design more efficient energy policies, the EE determinants in manufacturing firms have been little studied in the empirical literature. From an exhaustive sample of Spanish manufacturing firms and using a logit model, we examine the energy efficiency determinants for those firms that have innovated. To carry out the econometric analysis, we use panel data from the Community Innovation Survey for the period 2008‐2011. Our empirical results underline the role of size among the characteristics of firms that facilitate energy efficiency innovation. Regarding company behaviour, firms that consider the reduction of environmental impacts to be an important objective of innovation and that have introduced organisational innovations are more likely to innovate with the objective of increasing energy efficiency. Keywords: energy efficiency, corporate targets, innovation, Community Innovation Survey. JEL Classification: Q40, Q55, O31

Position sensorless electrically excited synchronous motor drive for industrial use based on direct flux linkage and torque control

Synchronous machines with an AC converter are used mainly in large drives, for example in ship propulsion drives as well as in rolling mill drives in steel industry. These motors are used because of their high efficiency, high overload capacity and good performance in the field weakening area. Present day drives for electrically excited synchronous motors are equipped with position sensors. Most drives for electrically excited synchronous motors will be equipped with position sensors also in future. This kind of drives with good dynamics are mainly used in metal industry. Drives without a position sensor can be used e.g. in ship propulsion and in large pump and blower drives. Nowadays, these drives are equipped with a position sensor, too. The tendency is to avoid a position sensor if possible, since a sensor reduces the reliability of the drive and increases costs (latter is not very significant for large drives). A new control technique for a synchronous motor drive is a combination of the Direct Flux Linkage Control (DFLC) based on a voltage model and a supervising method (e.g. current model). This combination is called Direct Torque Control method (DTC). In the case of the position sensorless drive, the DTC can be implemented by using other supervising methods that keep the stator flux linkage origin centered. In this thesis, a method for the observation of the drift of the real stator flux linkage in the DTC drive is introduced. It is also shown how this method can be used as a supervising method that keeps the stator flux linkage origin centered in the case of the DTC. In the position sensorless case, a synchronous motor can be started up with the DTC control, when a method for the determination of the initial rotor position presented in this thesis is used. The load characteristics of such a drive are not very good at low rotational speeds. Furthermore, continuous operation at a zero speed and at a low rotational speed is not possible, which is partly due to the problems related to the flux linkage estimate. For operation in a low speed area, a stator current control method based on the DFLC modulator (DMCQ is presented. With the DMCC, it is possible to start up and operate a synchronous motor at a zero speed and at low rotational speeds in general. The DMCC is necessary in situations where high torque (e.g. nominal torque) is required at the starting moment, or if the motor runs several seconds at a zero speed or at a low speed range (up to 2 Hz). The behaviour of the described methods is shown with test results. The test results are presented for the direct flux linkage and torque controlled test drive system with a 14.5 kVA, four pole salient pole synchronous motor with a damper winding and electric excitation. The static accuracy of the drive is verified by measuring the torque in a static load operation, and the dynamics of the drive is proven in load transient tests. The performance of the drive concept presented in this work is sufficient e.g. for ship propulsion and for large pump drives. Furthermore, the developed methods are almost independent of the machine parameters.

The purpose and use of passenger ships in 2058 - Future scenarios generated by the Delphi method

The purpose of the thesis is to generate scenarios of future purposes and of use of ships, suitable for STX Finland Cruise Oy to design and build, over a 50 year time span by applying the Delphi method and an open innovation approach in a future workshop. The scenarios were mapped out with help of two Delphi survey rounds and one future workshop. The number of participants in both surveys and the workshop was some twenty experts in each, representing various fields. On the basis of the first survey round, four different subject areas were selected for analysis: purposes for the use of ships; energy efficiency of cruises and ships; cost efficiency of sea transportation and vacation; and the views and expectations of the customers in the future. As a result of the future workshop, four different themes were established, which were studied further during the second Delphi round. The themes are future service and operation concepts; versatile uses of the space in ships; communication of environmental benefits of ships, future energy solutions and social interaction between passengers onboard. In addition to generating the scenarios, further aim of the thesis is to implement the Delphi method and workshop activity as foresight tools for STX Europe and to produce a chart of a future shipbuilding foresight community to can serve the open innovation processes in the maritime cluster as a whole.

Biokaasulaitoksen rejektivesien vaikutus jätevedenpuhdistamon toimintaan ja rejektivesien esikäsittelyn tarpeellisuus

Diplomityön tavoitteena oli tutkia biokaasulaitoksen rejektivesien ominaisuuksiin vaikuttavia tekijöitä ja rejektiveden esikäsittelyn tarpeellisuutta. Lisäksi tavoitteena oli tarkastella Kouvolaan suunnitteilla olevan Kymen Bioenergia Oy:n biokaasulaitoksen rejektivesien vaikutusta Kouvolan Veden Mäkikylän jätevedenpuhdistamolla. Biokaasulaitoksen rejektivedet ovat yhdyskuntajätevesiin verrattuna selvästi konsentroituneempia. Jätevedenpuhdistamoilla erityisesti rejektiveden korkea typpipitoisuus aiheuttaa lisäkuormitusta. Suomessa toiminnassa oleville biokaasulaitoksille tehdyn kyselytutkimuksen tulosten perusteella rejektiveden typpipitoisuuteen vaikuttaa syötteen typpipitoisuus sekä mädätysjäännöksen kuivauksen tehokkuus. Rejektiveden kiintoainepitoisuudella on puolestaan vaikutusta biologiseen hapenkulutukseen ja välillisesti myös rejektiveden kemialliseen hapenkulutukseen. Rejektivesien jätevedenpuhdistamoilla aiheuttamaa kuormitusta on mahdollista vähentää esikäsittelemällä rejektivedet joko biologisella tai fysikaalis-kemiallisella puhdistusmenetelmällä. Kyselytutkimus kuitenkin osoitti, että rejektivesien esikäsittelyssä ei aina päästä puhdistustavoitteeseen. Jätevedenkäsittelyn sijaan rejektivesiä on mahdollista käyttää lannoitteena, mikäli biokaasulaitoksen syöte ei sisällä jätevedenpuhdistamon lietteitä. Myös Kouvolan Veden Mäkikylän puhdistamolla biokaasulaitoksen rejektivedet tulevat lisäämään merkittävästi tulovirtaaman typpikuormaa. Typpikuorman lisäys edellyttää ilmastusaltaassa ilmastuksen tehostamista sekä kalkin syöttömäärän lisäämistä, jotta jäteveden happipitoisuus ja pH pysyvät typenpoistoreaktioille suotuisina. Lisäksi tulovirtaamasta puolet tullaan ohjaamaan esiselkeyttimen ohi, jotta ilmastusaltaassa on orgaanista ainetta typenpoistoon riittävästi. Mäkikylän puhdistamon typenpoistokapasiteettia on mahdollista kasvattaa lisähiilen syötöllä. Mikäli biokaasulaitoksen kapasiteettilisäyksen jälkeen rejektivesien typpikuoma ylittää lisähiilellä saavutetun lisäkapasiteetin, on rejektivedet esikäsiteltävä.

Physiological cost of induced resistance in cotton plants at different nitrogen levels

Resistance induction through the use of chemical inducers often results in physiological costs to the plant. In this study, induced resistance in cotton plants was evaluated with regard to physiological costs in a cultivar susceptible to Colletotrichum gossypii var. cephalosporioides (CNPA GO 2002 - 7997). Plants were cultivated in substrates with two levels of nitrogen and received two applications of acibenzolar-S-methyl (ASM), jasmonic acid (JA) and Agro-Mos® (AM) disease resistance inducers. Plant height (H), internodal length (IL), shoot fresh weight (SFW), root fresh weight (RFW), shoot dry weight (SDW) and root dry weight (RDW) were evaluated. The activity of the phenylalanine ammonia lyase (PAL) and peroxidase (POX) was also determined. The plants treated with ASM presented high physiological costs with an accentuated reduction in H, SFW and SDW, whereas those treated with JA exhibited a significant increase in SDW, and did not significantly differ from H and IL. In the potting mix supplemented with nitrogen, all inducers differed from the control treatment regarding to internodal length, whereas only ASM and AM presented a significant difference between one another in the potting mix without the addition of nitrogen. Significant correlations (P=0.05) were found for most of the variables analyzed, with greater correlations observed between SFW and SDW (0.94); IL and H (0.74); SFW and H (0.70); and SDW and H (0.70). ASM induced the least amount of PAL activity, significantly differing from the remaining treatments. Greater POX activity was observed in ASM, which significantly differed from the control. AM and JA, however, presented lower activity than the control with regard to these enzymes, and it was not possible to confirm induction resistance in these two treatments.