Estudo comparativo de carragenanas comerciais Kappa, Iota e Lambda no processo inflamatório em ratos :edema intraplantar e pleurisia

The Iota, Kappa and Lambda commercial carrageenans are rarely pure and normally contain varying amounts of the other types of carrageenans. The exact amount of impurity depends on the seaweed source and extraction procedure. Then, different analysis methods have been applied for determination of the main constituents of carrageenans because these three carrageenans are extensively used in food, cosmetic and pharmaceutical industry. The electrophoresis of these compounds proved that the carrageenans are constituted by sulfated polysaccharides. These compounds were characterized by colorimetric methods and was observed that the Lambda carrageenan shown the greater value (33.38%) of sulfate. These polymers were examined by means of 13C NMR spectroscopy and infrared spectra. The polysaccharides consisted mainly of units alternating of sulfated galactoses and anhydrogalactoses. The aim of the study was also to test the inflammatory action of these different polysaccharides. A suitable model of inflammation is acute sterile inflammation of the rat hind limb induced by carrageenan. Paw edema was induced by injecting carrageenans (κ, ι and λ) in saline into the hind paw of a male Wistar rats (175–200 g). The pathway to acute inflammation by carrageenan (kappa, iota and lambda) were expressed as time-edema dependence and measured by paw edema volume. For this purpose, was used an apparatus (pakymeter), which makes it possible to measure the inflammation (swelling of the rat foot) with sufficient accuracy. The results showed that κ-carrageenan (1%) have an edema of 3.7 mm and the paw edema increase was time and dose dependent; the ι-carrageenan (0.2%) caused an edema of 4 mm and the λ-carrageenan (1%) caused an edema of 3.6 mm. Other model was used in this study based in the inflammation of pleura for comparatives studies. Injection of carrageenans into the pleural cavity of rat induced an acute inflammatory response characterized by fluid accumulation in the pleural cavity, a large number of neutrophils and raised NO production. The levels of NO were measured by Griess reactive. The ι-carrageenan caused the greater inflammation, because it has high concentration of nitrite/nitrate (63.478 nmoles/rat), exudato volume (1.52 ml) and PMNs (4902 x 103 cells). Quantitative evaluation of inflammations of rats is a useful and important parameter for the evaluation of the efficacy of anti-inflammatory drugs

Sistemas de informação geográfica e análise espacial de dados como ferramentas para determinação de agregação espacial de doenças: a hanseníase como modelo

This work demonstrates the importance of using tools used in geographic information systems (GIS) and spatial data analysis (SDA) for the study of infectious diseases. Analysis methods were used to describe more fully the spatial distribution of a particular disease by incorporating the geographical element in the analysis. In Chapter 1, we report the historical evolution of these techniques in the field of human health and use Hansen s disease (leprosy) in Rio Grande do Norte as an example. In Chapter 2, we introduced a few basic theoretical concepts on the methodology and classified the types of spatial data commonly treated. Chapters 3 and 4 defined and demonstrated the use of the two most important techniques for analysis of health data, which are data point processes and data area. We modelled the case distribution of Hansen s disease in the city of Mossoró - RN. In the analysis, we used R scripts and made available routines and analitical procedures developed by the author. This approach can be easily used by researchers in several areas. As practical results, major risk areas in Mossoró leprosy were detected, and its association with the socioeconomic profile of the population at risk was found. Moreover, it is clearly shown that his approach could be of great help to be used continuously in data analysis and processing, allowing the development of new strategies to work might increase the use of such techniques in data analysis in health care

Técnicas de análise multivariada na determinação de grupos homogêneos de produtores de leite

Nesta pesquisa objetivou-se captar a variedade de situações tecnológicas para identificar grupos de produtores, o mais semelhante possível, no conjunto de variáveis e características selecionadas. Foram considerados 72 produtores, 8,33% da amostra total, selecionados conforme 29 variáveis relacionadas a fatores produtivos. Avaliaram-se as variáveis de melhor representatividade dentro de cada fator e suas comunalidades dentro do conjunto de fatores analisados. Para a avaliação desses resultados, foram utilizados métodos de análise fatorial em componentes principais. Posteriormente, aplicou-se o método de análise de agrupamentos. O pluralismo tecnológico requer análises de agrupamento para viabilizar intervenções técnicas diferenciadas, o que permite a consolidação de condições de sustentabilidade a partir das reais necessidades de incorporação tecnológica dos produtores.

Tornar-se, ser e viver do professorado: entre regularidades e variações identitárias

The main aim of this research has been to analyze the identity patterns of the teacher s staff of fundamental education public schools in the Metropolitan Area of Natal-RN. It sets out from the hypothesis that being a teacher within this context grows out of the regularities of a specific habitus, which, according to Bourdieu, develops into mental schemes of thought and action within a specific social group. This habitus forms the basis on which is built the social representation of being a teacher prevailing in the group, as well as the symbolic differences that typify its identity variations. Three data sources have been fundamental in building up this thesis: (a) formative essays of students graduating from a Higher Teacher s Formation Course, as well as observing some of the public defense of these essays during field work; (b) a questionnaire aimed at classifying economically, socially, and culturally a sample of public teachers of the Natal-RN county; and (c) submitting a sub-sample of this group to the process of Multiple Classification Procedures (MCP). The analysis of data was done according to the multidimensional, non-parametric statistical procedures of both the Category Content Analysis and Enunciation Analysis methods. The results of the analysis took into account an ample set of variables, its associations and implications, the cultural and social profile of the population under scrutiny, their life styles, as well as the strategies they developed in the process of becoming a teacher, and the social representation of being a teacher . We came to the conclusion that the social identity of the teachers corps, or as we prefer to say it being a teacher , is a result of a set of regularities produced by the habitus that gives social shape and meaning to the existence of the group proper. We note the existence of identity variations caused by the variables (a) educational level; and (b) mode of action in fundamental education (if these are the first or last grades where the subjects operate). However, these variations will not break the power of the regularities that give shape, meaning, and social visibility to the group. The social representation of being a teacher points to the tensions, ambiguities, and trends inherent to common sense, as well as to a strong tendency to reassign a new meaning to being a teacher. Our thesis, therefore, is that the identity configuration of the teachers corps under scrutiny is characterized by an integrative synthesis, by-product of a habitus that is superimposed, and at the same time co-exists with different identity variations

Como vão se formando os professores em física e química: embates entre o ser, o ter e o fazer na formação de licenciandos da UFRN sob a perspectiva da teoria das representações sociais

The purpose of this work is to approach and understand the Social Representations (SR) (MOSCOVICI, 2003) about Physics and Chemistry from people who are major in these courses, as well as their Social Representations about teaching . We took as principle that approaching these representations it would be possible to relate their symbolic contents, in order to show how people who are following the first segments of bachelor degree courses in Physics and Chemistry become teachers, taking into account a psychosocial view. Two source of data was used during this research: Free-association Technique FA (ABRIC, 1994); and Multiple Classification Procedure (MCP) (ROAZZI, 1995). The analytical treatment of the collected data from FA was done according to the proposition of Grize, Vergés and Silem (1987 apud ABRIC, 1994, p. 66). MCP data were analyzed through MSA (Multidimensional Scalogram Analysis) and SSA (Singular Spectrum Analysis) methods associated with the Facet Theory (BILSKY, 2003). The discourses of MCP discussing groups at the moment of explanations were studied by Content Analysis as it was proposed by Bardin (1977) and Franco (2005). Indicative of an approach to the relations with knowledge (CHARLOT, 2000), the connections which aroused from the analyses showed that the group of future majors in Physics thought that this scientific field was based on a rationalist conception, influencing the idealization sense of the phenomena to be explained by Physics. Thus, Physics as school content started to require the student of the fundamental and high school to think abstractly as a cognitive skill of learning. The identifying elements observed in the relations between SR about Physics and Teaching aroused from the antagonism between future majors and their teacher, as well as from the speculation between their fundamental and high school students and themselves, mainly when they had to face the act of teaching due to the obstacles imposed by the own educational system, and by the weakness of the initial preparation. The group of future majors in Chemistry, through its discourses, showed these relations when they conceived empiricist Chemistry and said that teaching was the way of transmission of this knowledge, and didactics of Chemistry teaching was the direction to learning through pedagogic methods in order to lead the students to discoveries. The psychosocial contents which were built and showed from the symbolic relations in the studied SR achieved the relation of identity. This relation revealed identifying elements for these people, resulting from the traffic between their condition as students of Chemistry, and as teachers regarding their work, what placed the current relational contents in the teaching space, named as Knowledge changing and Adaptability . In order to study emerging questions in the discussing environment about formation and teaching professionalization, we focused the psychosocial view on this traffic and managed to observe epistemological practical and pedagogic obstacles that limited a configuration of the teaching work as a professional activity, especially from the particular conditions which led the relations of senses to Physics , Chemistry and Teaching ; and Chemistry and Physics as it was seen in this research. Generally speaking, we noted that these obstacles can denounce such obstacles concerning to the pedagogic doings which mainly impair the learning process of fundamental and high school students

Padrões nutricionais para lavouras arrozeiras irrigadas por inundação pelos métodos da CDN chance matemática

Para o arroz irrigado, poucos trabalhos utilizam métodos de diagnose foliar desenvolvidos para as condições locais de clima, solo ou cultivares. O objetivo deste trabalho foi avaliar os métodos da Diagnose da Composição Nutricional e da Chance Matemática na definição dos padrões nutricionais de lavouras arrozeiras do Estado do Rio Grande do Sul. Resultados de produtividade de grãos e teores foliares de N, P, K, Ca, Mg, S, B, Cu, Fe, Mn, Zn e Mo de 356 lavouras arrozeiras cultivadas sob sistema de irrigação por inundação foram utilizados para a determinação das faixas de suficiência calculadas pelo método da Chance Matemática. As faixas de suficiência foram comparadas com valores críticos propostos pela literatura e com o intervalo de confiança do teor médio dos nutrientes em lavouras consideradas nutricionalmente equilibradas, identificadas pelo método Diagnose da Composição Nutricional. Observou-se pouca concordância entre os valores das faixas de suficiência indicados pelos métodos da Chance Matemática e da Diagnose da Composição Nutricional e os respectivos valores indicados na literatura. A faixa de teores foliares adequados, consistentes com maior produtividade média das lavouras arrozeiras, foi indicada ser de 23 a 28 g kg-1 para N; 11 a 14 g kg-1 para K; 1,4 a 2,0 g kg-1 para S; 6 a 12 mg kg-1 para B; e 70 a 200 mg kg-1 para Fe. Para os teores foliares de P, Ca, Mg, B, Cu, Mn e Zn e Mo nenhuma das faixas adequadas testadas indicou capacidade para distinguir as lavouras arrozeiras quanto à produtividade média.

Distribuição radicular de cultivares de aspargo em áreas irrigadas de Petrolina - PE

A distribuição radicular de duas cultivares de aspargo (New Jersey 220 e UC 157 F1), irrigadas por aspersão convencional, foi avaliada durante o ano de 1997 em solos de textura arenosa, em plantio experimental e comercial, respectivamente, nos Projetos de Irrigação de Bebedouro e Senador Nilo Coelho, em Petrolina (PE). O objetivo foi obter informações do sistema radicular do aspargo, empregando-se os métodos do monolito e do perfil de solo auxiliado pela análise de imagens digitais, para o manejo de solo e água nesse cultivo. Na área experimental, a maior parte da matéria seca, área e comprimento de raízes no perfil de solo e densidade de comprimento radicular foram encontradas até a profundidade de 0,4 m nas duas cultivares, enquanto que na comercial a maior parte da área e comprimento de raízes no perfil do solo estendeu-se até a profundidade de 0,6 m (cv. New Jersey 220). Nesses dois plantios, as raízes das cultivares atingiram a profundidade de 1 m. Na área experimental, a massa seca, a área e o comprimento no perfil de solo, e a densidade de comprimento radicular nas cultivares concentraram-se até a distância de 0,6 m à linha de plantas. No intervalo de diâmetro (d) de raízes 2

Estudo de antenas patches de microfita miniaturizadas em banda larga para aplicação em dispositivos móveis e portáteis

This work presents techniques used to design and manufacture microstrip patch antennas for applications in portable and mobile devices. To do so, are evaluated several factors that can influence the performance of microstrip patch antennas. Miniaturization techniques are studied and employed in order to apply this type of antenna in mobile and / or mobile. The theories of microstrip patch antennas are addressed by analyzing characteristics such as constitution, kinds of patches, substrates, feeding methods, analysis methods, the main advantages and disadvantages and others. Techniques for obtaining broadband microstrip patch antennas were surveyed in literature and exemplified mainly by means of simulations and measurements. For simulations of the antennas was used the commercial software . In addition, antenna miniaturization techniques have been studied as a main concern the fundamental limits of antennas with special attention to electrically small antennas because they are directly linked to the microstrip patch antennas. Five design antennas are proposed to demonstrate the effectiveness of techniques used to obtain the microstrip patch antennas broadband and miniaturized for use in mobile devices and/or portable. For this, the proposed antennas were simulated, built and measured. The antennas are proposed to be used in modern systems of wireless communications such as DTV, GPS, IEEE 802.16, IEEE 802.11, etc. The simulations of the antennas were made in business and computer programs. The measured results were obtained with a parser Vector of networks of the Rhode and Schwarz model ZVB 14

Estudo da topologia de redes de conexão funcional no córtex sensorial primário e hipocampo durante o sono de ondas lentas

Complex network analysis is a powerful tool into research of complex systems like brain networks. This work aims to describe the topological changes in neural functional connectivity networks of neocortex and hippocampus during slow-wave sleep (SWS) in animals submited to a novel experience exposure. Slow-wave sleep is an important sleep stage where occurs reverberations of electrical activities patterns of wakeness, playing a fundamental role in memory consolidation. Although its importance there s a lack of studies that characterize the topological dynamical of functional connectivity networks during that sleep stage. There s no studies that describe the topological modifications that novel exposure leads to this networks. We have observed that several topological properties have been modified after novel exposure and this modification remains for a long time. Major part of this changes in topological properties by novel exposure are related to fault tolerance

Metais pesados do solo após aplicação de biossólido: II - Disponibilidade

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Information Visualization to Enhance Sensitivity and Selectivity in Biosensing

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Dowscaling estocástico para extremos climáticos via interpolação espacial

Present day weather forecast models usually cannot provide realistic descriptions of local and particulary extreme weather conditions. However, for lead times of about a small number of days, they provide reliable forecast of the atmospheric circulation that encompasses the subscale processes leading to extremes. Hence, forecasts of extreme events can only be achieved through a combination of dynamical and statistical analysis methods, where a stable and significant statistical model based on prior physical reasoning establishes posterior statistical-dynamical model between the local extremes and the large scale circulation. Here we present the development and application of such a statistical model calibration on the besis of extreme value theory, in order to derive probabilistic forecast for extreme local temperature. The dowscaling applies to NCEP/NCAR re-analysis, in order to derive estimates of daily temperature at Brazilian northeastern region weather stations

Ultrasonic density measurement cell design and simulation of non-ideal effects

This paper presents a theoretical analysis of a density measurement cell using an unidimensional model composed by acoustic and electroacoustic transmission lines in order to simulate non-ideal effects. The model is implemented using matrix operations, and is used to design the cell considering its geometry, materials used in sensor assembly, range of liquid sample properties and signal analysis techniques. The sensor performance in non-ideal conditions is studied, considering the thicknesses of adhesive and metallization layers, and the effect of residue of liquid sample which can impregnate on the sample chamber surfaces. These layers are taken into account in the model, and their effects are compensated to reduce the error on density measurement. The results show the contribution of residue layer thickness to density error and its behavior when two signal analysis methods are used. (c) 2006 Elsevier B.V. All rights reserved.

Optimal design of smart structures using bonded plezoelectrics for vibration control

Smart material technology has become an area of increasing interest for the development of lighter and stronger structures which are able to incorporate actuator and sensor capabilities for collocated control. In the design of actively controlled structures, the determination of the actuator locations and the controller gains, is a very important issue. For that purpose, smart material modelling, modal analysis methods, control and optimization techniques are the most important ingredients to be taken into account. The optimization problem to be solved in this context presents two interdependent aspects. The first one is related to the discrete optimal actuator location selection problem which is solved in this paper using genetic algorithms. The second is represented by a continuous variable optimization problem, through which the control gains are determined using classical techniques. A cantilever Euler-Bernoulli beam is used to illustrate the presented methodology.

Optimal placement of piezoelectric sensor/actuators for smart structures vibration control

Smart material technology has become an area of increasing interest for the development of lighter and stronger structures that are able to incorporate actuator and sensor capabilities for collocated control. In the design of actively controlled structures, the determination of the actuator locations and the controller gains is a very important issue. For that purpose, smart material modeling, modal analysis methods, and control and optimization techniques are the most important ingredients to be taken into account. The optimization problem to be solved in this context presents two interdependent aspects. The first is related to the discrete optimal actuator location selection problem, which is solved in this paper using genetic algorithms. The second is represented by a continuous variable optimization problem, through which the control gains are determined using classical techniques. A cantilever Euler-Bernoulli beam is used to illustrate the presented methodology.