Study of carbohydrates present in the cladodes of Opuntia ficus-indica (fodder palm), according to age and season

Types and content of carbohydrates were evaluated by chemical (spectrophotometric assay) and physicochemical (Thin Layer Chromatography - TLC and High Performance Liquid Chromatography - HPLC) methods in some Opuntia ficus-indica varieties according to age and season. The samples comprised four varieties of palm (giant, copena F1, clone 20, and round palm). The results demonstrated that the four varieties of palm contain a good quantity of neutral and acid sugars in both summer and winter seasons. However, samples collected in the summer presented a higher content of carbohydrates specially glucose, fructose, galactose, xylose, and arabinose. The tertiary cladode (old cladode) presented almost the double content of sugar found in the quaternary cladodes (young cladodes). Pectic polysaccharides were sequentially extracted with water at 60 ºC, and EDTA at 60 ºC solution resulting in Water-Soluble Pectin (WSP) and a Chelating-Soluble Pectin (CSP) respectively. Galacturonic acid was detected in the fractions WSP and CSP. However, the fraction CSP presented the highest content of sugar acid.

Deep-fat frying of meat products in palm olein

This study investigated the discontinuous frying of breaded meat products in palm olein in a 28 L-electric fryer maintained at 182 ºC for 8 hours a day. Three 400-500 g batches of meat products were fried for 4.5 minutes daily. For comparison purpose, thermoxidation tests were performed using inert material with added moisture and without the addition of f ood (heating only). The total polar compound content did not reach the 25% limit, and nor did the formation of polymerized products exceed 5%, which indicates the good frying performance of palm olein for frying. Other analytical parameters and rapid tests were also evaluated. The sensory attributes, such as odor, colour, and foam formation determined when the frying oils should be discarded. The addition of water to the inert material contributed to the final value of 1.00 ± 0.01% (in palmitic acid), while the oil subjected only to heating reached respectively 0.26 ± 0.02%, and the oils used to fry breaded meat and breaded chicken reached 0.38 ± 0.00% and 2.35 ± 0.01%, respectively. This suggests a protective effect of the water during frying since the oil subjected only to heating was more prone to degradation.

Elaboration of biscuits with oatmeal and fat palm with added L-leucine and calcium for sarcopenia

The objective of this study was to evaluate the effect of the addition of oatmeal and palm fat in the elaboration of biscuits with added L-leucine and calcium in order to develop a product for sarcopenia in the elderly. The biscuits, or cookies, were elaborated applying a central composite rotational design with surface response methodology, and the significant linear, quadratic and interaction terms were used in the second order mathematical model. Physical, physicochemical and sensory analyses were performed by a trained panel. Based on the best results obtained, three cookie formulations were selected for sensory evaluation by the target group and physicochemical determinations. The formulations with the highest sensory scores for appearance and texture and medium scores for color and expansion index were selected. The addition of calcium and leucine increased significantly the concentration of these components in the biscuits elaborated resulting in a cookie with more than 30% of DRI (Dietary Reference Intake) for calcium and leucine. The formulations selected showed high acceptance by the target group; therefore, they can be included in the diet of elderly with sarcopenia as a functional food.

Alterations of palm oil (Elaeis guineensis) in the continuous industrial par frying of breaded chicken snacks

The physical and chemical alterations in palm oil during continuous industrial par frying of breaded chicken snacks were evaluated using a pseudo first-order kinetic model. The acidity index, refractive index, concentration of polar compounds, viscosity, color, and absorbance (232 and 268 nm) of 238 samples of the frying oil collected during 26 days of production were analyzed. For all of the analyses, the results of the oil were below the limits recommended for oil disposal, indicating that the processing conditions were safe and that under these experimental conditions the oil remained suitable for frying. The linear regressions were significant for refractive index, content of polar compounds, and lightness (L*). The content of polar compounds was determined using a cooking oil tester, and it had the best fit to the proposed model and can be used as an effective index for monitoring palm oil during the continuous par frying of breaded chicken snacks. The high turnover rate of the oil was important for maintaining the oil in good running conditions.

The production of Pleurotus sajor-caju in peach palm leaves (Bactris gasipaes) and evaluation of its use to enrich wheat flour

The aim of this study was to evaluate of Pleurotus sajor-caju production in peach palm leaves and the addition of different fractions of mushroom powder to wheat flour to increase its nutritional value without changing its characteristics. The best yield (48.4%), biologic efficiency (4.5%), and Pr (0.36 g/day) values were obtained using 20% inoculum fraction and 10% rice bran fraction. The Pleurotus sajor-caju fruiting body cultivated under these conditions had the following composition in 100 g: 29.91 g (carbohydrates), 42.92 g (proteins), 1.24 g (lipids), 15.93 g (fibers), 7.42 g (ashes), 1.6 g (phosphorus), 2.7 g (potassium), 8.73 mg (iron), 23.75 mg (sodium), 0.34 mg (thiamine), and 0.57 mg (riboflavin). The wheat flour with mushroom powder had reduced sugar content, but it did not have increased fat content. The fiber, protein, phosphorus, potassium, iron, and riboflavin contents were increased mainly when 10% mushroom powder was added to the wheat flour. Furthermore, this flour does not undergo drastic alterations in its physicochemical characteristics such as in moisture, wet gluten, color, and falling number.

Physicochemical properties and antioxidant activity of Tunisian date palm (Phoenix dactylifera L.) oil as affected by different extraction methods

The chemical analysis of flesh and seed of date palm fruit (Kentichi) was evaluated. Carbohydrates were the predominant component in all studied date cultivars (~78.69-83.46 g/100g dry matter), followed by moisture content (~9.23-11.17%), along with moderate amount of fat (~0.56-7.10 g/100g dry matter), protein (~2.16-2.80 g/100g dry matter), and ash (~1.18-1.64 g/100 g dry matter). Some antioxidants (Ascorbic acid, total phenolic, total flavonoid, chlorophyll and carotenoids) were found in different values in both date fruit and seed. The physicochemical properties and antioxidant activity of both flesh and seed oil which was extracted using Hexane, Soxhlet and Modified Bligh - Dyer extraction methods were determined. The experimental results showed that temperature, different solvents and extraction time had significant effect on the yield of the date palm oil and physicochemical properties. Date Flesh oil showed an important free radical scavenging activity towards 1-1-diphenyl-2-picrylhydrazyl (DPPH) free radical.

Characterization, physicochemical stability, and evaluation of in vitro digestibility of solid lipid microparticles produced with palm kernel oil and tristearin

Solid lipid particles have been investigated by food researchers due to their ability to enhance the incorporation and bioavailability of lipophilic bioactives in aqueous formulations. The objectives of this study were to evaluate the physicochemical stability and digestibility of lipid microparticles produced with tristearin and palm kernel oil. The motivation for conducting this study was the fact that mixing lipids can prevent the expulsion of the bioactive from the lipid core and enhance the digestibility of lipid structures. The lipid microparticles containing different palm kernel oil contents were stable after 60 days of storage according to the particle size and zeta potential data. Their calorimetric behavior indicated that they were composed of a very heterogeneous lipid matrix. Lipid microparticles were stable under various conditions of ionic strength, sugar concentration, temperature, and pH. Digestibility assays indicated no differences in the release of free fatty acids, which was approximately 30% in all analises. The in vitro digestibility tests showed that the amount of palm kernel in the particles did not affect the percentage of lipolysis, probably due to the high amount of surfactants used and/or the solid state of the microparticles.

Study of the physical and physicochemical characteristics of fruits of the licuri palm (Syagrus coronata (Mart.) Becc.) found in the Atlantic Forest of Minas Gerais, Brazil

AbstractThe Atlantic Forest has species of native fruits, consumed fresh and processed, which have an important contribution to food sovereignty of families that consume it. This study examined the physical and physicochemical characteristics, proximate composition, concentration of carotenoids, vitamin C, vitamin E and minerals in the pulp and kernels of fruits of licuri (Syagrus coronata (Mart.) Becc.). Titratable acidity was analyzed by volumetric neutralization, soluble solids by refractometry, proteins by the micro-Kjeldahl method, lipids by gravimetry using soxhlet, dietary fiber by non-enzymatic gravimetry, carotenoids and vitamin C by HPLC-DAD, vitamin E by HPLC-fluorescence, and minerals by ICP-AES. Pulp were a source of Zn (0.95 mg 100–1), a good source of fiber (6.15 g 100–1), excellent source of provitamin A (758.75 RAE 100–1), Cu (0.69 mg 100–1), Fe (3.81 mg 100–1), Mn (3.40 mg 100–1) and Mo (0.06 mg 100–1). The kernel were a source of Fe (3.36 mg 100–1) and excellent source of Mn (6.14 mg 100–1), Cu (0.97 mg 100–1) and Mo (0.07 mg 100–1). The nutritional value and wide availability of licuri fruit make it an important resource for reducing food insecurity and improving nutrition of the rural population and other individuals who have access to it.

Proximity Based Authentication in IoT

IoT consists of essentially thousands of tiny sensor nodes interconnected to the internet, each one of which executes the programmed functions under memory and power limita- tions. The sensor nodes are distributed mainly for gathering data in various situations. IoT envisions the future technologies such as e-health, smart city, auto-mobiles automa- tion, construction sites automation, and smart home. Secure communication of data under memory and energy constraints is major challenge in IoT. Authentication is the first and important phase of secure communication. This study presents a protocol to authenticate resource constraint devices in physical proximity by solely using the shared wireless communication interfaces. This model of authentication only relies on the abundance of ambient radio signals to authenticate in less than a second. To evaluate the designed protocol, SkyMotes are emulated in a network environment simulated by Contiki/COOJA. Results presented during this study proves that this approach is immune against passive and active attacks. An adversary located as near as two meters can be identified in less than a second with minimal expense of energy. Since, only radio device is used as required hardware for the authentication, this technique is scalable and interoperable to heterogeneous nature of IoT.

Influencing Perceived Agency: A Study into User Experiences in Digital Interactive Storytelling

User experience is a crucial element in interactive storytelling, and as such it is important to recognize the different aspects of a positive user experience in an interactive story. Towards that goal, in the first half of this thesis, we will go through the different elements that make up the user experience, with a strong focus on agency. Agency can be understood as the user’s ability to affect the story or the world in which the story is told with interesting and satisfying choices. The freedoms granted by agency are not completely compatible with traditional storytelling, and as such we will also go through some of the issues of agency-centric design philosophies and explore alternate schools of thought. The core purpose of this thesis is to determine the most important aspects of agency with regards to a positive user experience and attempt to find ways for authors to improve the overall quality of user experience in interactive stories. The latter half of this thesis deals with the research conducted on this matter. This research was carried out by analyzing data from an online survey coupled with data gathered by the interactive storytelling system specifically made for this research (Regicide). The most important aspects of this research deal with influencing perceived agency and facilitating an illusion of agency in different ways, and comparing user experiences in these different test environments. The most important findings based on this research include the importance of context-controlled and focused agency and settings in which the agency takes place and the importance of ensuring user-competency within an interactive storytelling system. Another essential conclusion to this research boils down to communication between the user and the system; the goal of influencing perceived agency should primarily be to ensure that the user is aware of all the theoretical agency they possess.

Metrics for Predicting User Behavior and Experience in an Interactive Storytelling System

In much of the previous research into the field of interactive storytelling, the focus has been on the creation of complete systems, then evaluating the performance of those systems based on user experience. Less focus has been placed on finding general solutions to problems that manifest in many different types of interactive storytelling systems. The goal of this thesis was to identify potential candidates for metrics that a system could use to predict player behavior or how players experience the story they are presented with, and to put these metrics to an empirical test. The three metrics that were used were morality, relationships and conflict. The game used for user testing of the metrics, Regicide is an interactive storytelling experience that was created in conjunction with Eero Itkonen. Data, in the forms of internal system data and survey answers, collected through user testing, was used to evaluate hypotheses for each metric. Out of the three chosen metrics, morality performed the best in this study. Though further research and refinement may be required, the results were promising, and point to the conclusion that user responses to questions of morality are a strong predictor for their choices in similar situations later on in the course of an interactive story. A similar examination for user relationships with other characters in the story did not produce promising results, but several problems were recognized in terms of methodology and further research with a better optimized system may yield different results. On the subject of conflict, several aspects, proposed by Ware et al. (2012), were evaluated separately. Results were inconclusive, with the aspect of directness showing the most promise.

Influence of disinfestation and osmotic conditioning on the germinating behavior of australian royal palm (Archontophoenix alexandrae)seeds

The technique of Osmotic Conditioning, which consists of partial and controlled hydration of the seeds, has obtained success with various species of seeds, increasing the germinating span and tolerance to the adverse conditions of the environment, and has also reduced the time elapsed between sowing and the emergence of the plants. Associated to ideal storage conditions, the treatment has increased the performance of the seeds of tropical wood species. Aiming at studying the germinating environment and the effect of osmotic conditioning on the germination of seeds of the Australian Royal Palm tree, two experiments were performed. The first one evaluated the effect of disinfestation of the seeds of the Australian Royal Palm tree with NaClO. The treatments applied were: 0.5% sodium hypochlorite, exposure periods of 5, 15, 30, 45, 60, 90, 120 and 240 minutes, and the fungicide Captan, as control. The treatments with NaClO did not differ in relation to the final percentage of germination and to the germination speed index, and did not differ from the treatment control. The second test evaluated solutions with the following osmotic potentials: 0.0MPa (pure water), -0.4MPa, -0.6MPa and -0.8MPa, exposed for the periods of 10 and 20 days. The final percentage of germination did not differ among the treatments. The seeds hydrated in pure water for a period of 20 days showed a germination speed index significantly superior to the other treatments, and they did not show significant differences among themselves.

Recognition of nucleic acids by metal ion complexes

Metal-ion-mediated base-pairing of nucleic acids has attracted considerable attention during the past decade, since it offers means to expand the genetic code by artificial base-pairs, to create predesigned molecular architecture by metal-ion-mediated inter- or intra-strand cross-links, or to convert double stranded DNA to a nano-scale wire. Such applications largely depend on the presence of a modified nucleobase in both strands engaged in the duplex formation. Hybridization of metal-ion-binding oligonucleotide analogs with natural nucleic acid sequences has received much less attention in spite of obvious applications. While the natural oligonucleotides hybridize with high selectivity, their affinity for complementary sequences is inadequate for a number of applications. In the case of DNA, for example, more than 10 consecutive Watson-Crick base pairs are required for a stable duplex at room temperature, making targeting of sequences shorter than this challenging. For example, many types of cancer exhibit distinctive profiles of oncogenic miRNA, the diagnostics of which is, however, difficult owing to the presence of only short single stranded loop structures. Metallo-oligonucleotides, with their superior affinity towards their natural complements, would offer a way to overcome the low stability of short duplexes. In this study a number of metal-ion-binding surrogate nucleosides were prepared and their interaction with nucleoside 5´-monophosphates (NMPs) has been investigated by 1H NMR spectroscopy. To find metal ion complexes that could discriminate between natural nucleobases upon double helix formation, glycol nucleic acid (GNA) sequences carrying a PdII ion with vacant coordination sites at a predetermined position were synthesized and their affinity to complementary as well as mismatched counterparts quantified by UV-melting measurements.

Pretraining Convolutional Neural Networks for Visual Recognition

Convolutional Neural Networks (CNN) have become the state-of-the-art methods on many large scale visual recognition tasks. For a lot of practical applications, CNN architectures have a restrictive requirement: A huge amount of labeled data are needed for training. The idea of generative pretraining is to obtain initial weights of the network by training the network in a completely unsupervised way and then fine-tune the weights for the task at hand using supervised learning. In this thesis, a general introduction to Deep Neural Networks and algorithms are given and these methods are applied to classification tasks of handwritten digits and natural images for developing unsupervised feature learning. The goal of this thesis is to find out if the effect of pretraining is damped by recent practical advances in optimization and regularization of CNN. The experimental results show that pretraining is still a substantial regularizer, however, not a necessary step in training Convolutional Neural Networks with rectified activations. On handwritten digits, the proposed pretraining model achieved a classification accuracy comparable to the state-of-the-art methods.