Physicochemical properties, modifications and applications of starches from different botanical sources

Present trends towards technologies and processes that increase the use of residues make starchy vegetal biomass an important alternative material in various applications due to starch’s versatility, low cost and ease of use when its physicochemical properties are altered. Starch is increasingly used in many industrial applications and as a renewable energy resource. Starch can be modified to enhance its positive attributes and eliminate deficiencies in its native characteristics. In this article, the state of knowledge on conventional and unconventional starches and their properties, characteristics, modifications and applications are reviewed.

Development and evaluation of iron-rich meatloaves containing pork liver for schoolchildren

AbstractIron deficiency is a highly prevalent nutritional problem worldwide and it impacts on the cognitive development of children. Therefore, the aim of this research was to develop meatloaf with high iron content by using in their formulations pork liver. Meatloaves were prepared with additions of 9.98% and 13.31% (formulations A and B) of pork liver in order to meet 15% and 20% of the daily requirement of iron (10 mg/day) for children. Samples were evaluated regarding their physicochemical, microbiological and sensory characteristics. The results were subjected to Analysis of Variance (ANOVA) followed by Tukey test. Results of physicochemical analyses showed an increase in protein and mineral contents and a decrease in fat content. The iron and zinc contents were respectively 100.0% and 70.83% (formulation A) and 152.73% and 97.92% (formulation B) higher than that of the standard formulation. Regarding fat content, the reduction of 31.5% in formulation B makes it a light product. As for the microbiological aspect, all meatloaves were adequate for consumption. Regarding sensory analysis, all the attributes considered were not statistically different, but for purchase intention test formulation B was better accepted. Therefore, formulations A and B are good sources of iron and zinc.

Extraction, purification and characterization of inhibitor of trypsin from Chenopodium quinoa seeds

Abstract A novel trypsin inhibitor of protease (CqTI) was purified from Chenopodium quinoa seeds. The optimal extracting solvent was 0.1M NaCl pH 6.8 (p < 0.05). The extraction time of 5h and 90 °C was optimum for the recovery of the trypsin inhibitor from C. quinoa seeds. The purification occurred in gel-filtration and reverse phase chromatography. CqTI presented active against commercial bovine trypsin and chymotrypsin and had a specific activity of 5,033.00 (TIU/mg), which was purified to 333.5-fold. The extent of purification was determined by SDS-PAGE. CqTI had an apparent molecular weight of approximately 12KDa and two bands in reduced conditions as determined by Tricine-SDS-PAGE. MALDI-TOF showed two peaks in 4,246.5 and 7,908.18m/z. CqTI presented high levels of essential amino acids. N-terminal amino acid sequence of this protein did not show similarity to any known protease inhibitor. Its activity was stable over a pH range (2-12), temperatures range (20-100 °C) and reducing agents.

Optimization and functionality of millet supplemented pasta

Abstract Millets are having superior nutritional qualities and health benefits; hence they can be used for supplementation of pasta. Pasta was prepared using composite flour (CF) of durum wheat semolina (96%) and carrot pomace (4%) supplemented with finger millet flour (FMF, 0-20g), pearl millet flour (PMF, 0-30g) and carboxy methyl cellulose (CMC, 2-4g). Second order polynomial described the effect of FMF, PMF and CMC on lightness, firmness, gruel loss and overall acceptability of extruded pasta products. Results indicate that an increasing proportion of finger and pearl millet flour had signed (p≤0.05) negative effect on lightness, firmness, gruel loss and overall acceptability. However, CMC addition showed significant (p≤0. 05) positive effect on firmness, overall acceptability and negative effect on gruel loss of cooked pasta samples. Numeric optimization results showed that optimum values for extruded pasta were 20g FMF, 12g PMF and 4g CMC per 100g of CF and 34ml water with 0.981 desirability. The pasta developed is nutritionally rich as it contains protein (10.16g), fat (6g), dietary fiber (16.71g), calcium (4.23mg), iron (3.99mg) and zinc (1.682mg) per 100g.

Characterization of constituents, quality and stability of pomegranate seed oil (Punica granatum L.)

Abstract This study aimed to characterize pomegranate seed oil and evaluate its quality and stability parameters against those of linseed oil. The profile of fatty acids and phytosterols and the content of tocopherols were analyzed by gas chromatography and high performance liquid chromatography, respectively. The quality of both oils was assessed as recommended by the American Oil Chemists' Society (AOCS) and stability was evaluated using 2,2-diphenyl-1-picrylhydrazyl (DPPH), β-carotene bleaching (coupled oxidation of β-carotene/linoleic acid) and Rancimat® assays. While α-linolenic acid (52%) was the most abundant fatty acid in linseed oil (LO), punicic acid (55%) was highest in pomegranate seed oil (PSO). Tocopherols and phytosterols (175 and 539 mg/100 g, respectively) were greater in PSO than in LO (51 and 328 mg/100 g, respectively). Both oils met quality standards. The β-carotene bleaching and the DPPH assays showed greater oxidative stability for PSO than for LO. The Rancimat® method, on the other hand, indicated low stability for both oils.

Chemical, morphological, and thermogravimetric of Terminalia catappa Linn

The objective of this study is to evaluate the chemical composition, morphology, and the thermogravimetric behavior of the pulp of Terminalia catappa, also known as tropical almond. The analytical results show, based mainly on its lipid content, that this fruit has a considerable energy value. Its fiber content contributes to enhance the functional properties of the fruit. Morphological characteristics show a spongy-like structure with dispersion of starch granules and high concentration of fiber bundles, confirming the results of the chemical composition analysis. The thermogravimetric behavior exhibited by this fruit pulp when submitted to progressive temperature increase under dynamic air atmosphere shows that this raw material has great potential for industrial use due to its high absorption rate of water soluble and/or lipid-based compounds, allowing its use as a dietary complement or supplement ingredient in food products.

Impact of different drying parameters on color, β-carotene, antioxidant activity and minerals of apricot (Prunus armeniacaL.)

Abstract Apricot is one of the fruits dried by using different methods, such as sun, convective or microwave drying. The effects of drying methods on the components of this fruit differ depending upon the temperature or time parameters. In this research, the impacts of convective, microwave and microwave–convective drying techniques on color, β-carotene, minerals and antioxidant activity of apricots were investigated. The color values (L*, b*,ΔEab, h° and C*ab) of dried fruit were decreased, while the a* values increased. Compared with a fresh sample, the dried apricots showed a 1.4-3.9-fold proportional increase in β-carotene based on the increment of dry matter. The samples dried at high temperature and microwave levels, at 75 °C+90 watt and 75 °C+160 watt, showed lower antioxidant activity. Of the different drying treatments, the microwave-convective method (50 °C+160 watt) obtained a higher β-carotene content while maintaining antioxidant activity with a short drying time.

The effect of different concentrations of pre-harvest gibberellic acid on the quality and durability of ‘Obilnaja’ and ‘Black Star’ plum varieties

Abstract The research work aimed at investigating the effect of pre-harvest gibberellic acid (GA3) treatment on the quality of ‘Obilnaja’ and ‘Black Star’ Japanese plum varieties. GA3 was sprayed onto the trees during the fruit color break at 0, 25, 50, 75, and 100 ppm concentrations. After pre-cooling, the plums were placed in modified atmosphere packages and exposed to the following conditions as follows: short storage-transportation (ST) [20 days at 2 °C and 90% relative humidity (RH)]; distribution center (DC) (5 days at 6 °C and 80% RH), and shelf life conditions (SL) (2 days at 20 °C and 70% RH). Pre-harvest GA3 treatments increased the fruit weight and size. Treatment of GA3 at 50, 75, and 100 ppm increased the fruit flesh firmness and total soluble substances (TSS) values in both the plum varieties during storage, transport, and marketing; it also limited the weight loss during the marketing process. Treatment of GA3 had no significant effects on the color, titratable acidity (TA), and the total phenolic and antioxidant activity values of plums. Pre-harvest GA3 treatment at 50 ppm GA3 can be thus recommended for both the plum varieties due to its effect on the fruit quality.

Influence of the degree of hydrolysis and type of enzyme on antioxidant activity of okara protein hydrolysates

Abstract The objective of this work was to evaluate the antioxidant activity of protein hydrolysates obtained by the enzymatic hydrolysis of okara using an endopeptidase (Alcalase) and exopeptidase (Flavourzyme). The reaction was monitored by the pH-stat procedure in which five aliquots were collected during the hydrolysis by each enzyme, corresponding to different degrees of hydrolysis (DH). The antioxidant activities of the aliquots were evaluated by the ABTS, DPPH and FRAP methods. For the hydrolysates obtained using Alcalase, the antioxidant activities increased from: 68.6 to 99.5% (ABTS), 14.5 to 17.7% (DPPH) and 222.6 to 684.9 µM Trolox (FRAP), when the DH varied from 0 to 33.6%. With respect to Flavourzyme, the results were: 67.2 to 88.2% (ABTS), 9.5 to 18.5% (DPPH) and 168.0 to 360.3 µM Trolox (FRAP), when the DH increased up to 5.8%. The results showed that the protein hydrolysates had antioxidant capacities, which were influenced by the degree of hydrolysis and the type of enzyme.

Recovery and purification of anthocyanins from purple-blue potato

The aim of this work was to study techniques to extract and purify of anthocyanins from purple-blue potato. This topic was determined as a master’s thesis and it was done in collaboration with the Food Chemistry and Food Development Department of University of Turku and Department of Chemical and Process Engineering at Lappeenranta University of Technology. At first, purple-blue potatoes were pretreated in four types of boiled, raw, freeze-dried and dried boiled potato for extraction. They were mixed with aqueous acidified ethanol (ethanol:water:acetic acid 40%:53%:7% v/v) for conventional extraction. Boiled potato was selected as a best pretreated potato. Different ethanol concentration and extraction time were examined and the mixture of 80% in 24 h resulted in maximum anthocyanin content (132.23 mg/L). As conventional extraction method of anthocyanins was non-selective, some of impurities such as free sugars might accelerate anthocyanin degradation. Therefore, to obtain anthocyanins in purified form, adsorption as a promising selective method was used to recovery and isolate anthocyanins. It was carried out with six adsorbents. Among those, Amberlite XAD-7HP, a nonionic acrylic ester adsorbent, was found to have the best performance. In an adsorption column, flow rate of 3 mL/min was selected as the loading flow rate among four tested flow rates. Eluent volume and flow rate were 3 BV of aqueous acidified ethanol (75%, v/v) and 1 mL/min for desorption. The quantification of the total anthocyanin contents was performed by pH-differential method using UV-vis spectrophotometer. The resulting anthocyanin solution after purification was almost free from free sugars which were the major cause for degradation of anthocyanins. The average anthocyanin concentration in the purified and concentrated sample was obtained 1752.89 mg/L.

Explaining the intention to play and behavior of playing sports betting games of young Finnish adults : an application of the theory of planned behavior

The aim of this Master’s Thesis was to examine the determinants of intention and behavior of playing sports betting games in order to explain the intention to play in a more precise way and to be able to understand the behavior of playing. The theory of planned behavior was applied in explaining the intention of young Finnish adults aged 18 to 34. A quantitative research method was applied and an online survey was sent to the students of Lappeenranta University of Technology and to the subscribers of Urheilulehti in order to reach a sample that present the young population of Finland. The theory of the study focused on the theory of planned behavior and its antecedents, attitude towards behavior, subjective norms, perceived behavioral control as well as motivation. By analyzing the data, causal relationships were found through which the explanation of intention was possible. The results showed that attitude towards playing, subjective norms, perceived behavioral control and motivation impact the formation of intention significantly. The results also indicated that intention impacts significantly to the playing frequency.

Design and Simulation of High-Speed Rotating Electrical Machinery

Global energy consumption has been increasing yearly and a big portion of it is used in rotating electrical machineries. It is clear that in these machines energy should be used efficiently. In this dissertation the aim is to improve the design process of high-speed electrical machines especially from the mechanical engineering perspective in order to achieve more reliable and efficient machines. The design process of high-speed machines is challenging due to high demands and several interactions between different engineering disciplines such as mechanical, electrical and energy engineering. A multidisciplinary design flow chart for a specific type of high-speed machine in which computer simulation is utilized is proposed. In addition to utilizing simulation parallel with the design process, two simulation studies are presented. The first is used to find the limits of two ball bearing models. The second is used to study the improvement of machine load capacity in a compressor application to exceed the limits of current machinery. The proposed flow chart and simulation studies show clearly that improvements in the high-speed machinery design process can be achieved. Engineers designing in high-speed machines can utilize the flow chart and simulation results as a guideline during the design phase to achieve more reliable and efficient machines that use energy efficiently in required different operation conditions.

The death and resurrection of 'economics with psychology': remarks from a methodological standpoint

One of the merits of contemporary economic analysis is its capacity to offer accounts of choice behavior that dispense with details of the complex decision machinery. The starting point of this paper is the concern with the important methodological debate about whether economics might offer accurate predictions and explanations of actual behavior without any reference to psychological presuppositions. Inspired by an exercise of rational reconstruction of ideas, I aim to offer an interpretation of the process of freeing economic analysis from psychology at the end of the 19th century and the contemporary resurrection of behavioral approaches in the late 1980s.

A comparison of cognitive processes and components of neurological maturation in 3-and-11 year-old children

The relationship between the child's cogni tive development and neurological maturation has been of theoretical interest for many year s. Due to diff iculties such as the lack of sophisticated techniques for measur ing neurolog ical changes and a paucity of normative data, few studies exist that have attempted to correlate the two factors. Recent theory on intellectual development has proposed that neurological maturation may be a factor in the increase of short-term memory storage space. Improved technology has allowed reliable recordings of neurolog ical maturation.. In an attempt to correlate cogni tive development and neurological maturation, this study tested 3-and II-year old children. Fine motor and gross motor short-term memory tests were used to index cogni tive development. Somatosensory evoked potentials elici ted by median nerve stimulation were used to measure the time required for the sensation to pass along the nerve to specific points on the somatosensory pathway. Times were recorded for N14, N20, and P22 interpeak latencies. Maturation of the central nervous system (brain and spinal cord) and the peripheral nervous system (outside the brain and spinal cord) was indi~ated by the recorded times. Signif icant developmental di fferences occurred between 3-and ll-year-olds in memory levels, per ipheral conduction velocity and central conduction times. Linear regression analyses showed that as age increased, memory levels increased and central conduction times decreased. Between the ll-year-old groups, there were no significant differences in central or peripheral nervous system maturation between subjects who achieved a 12 plus score on the digit span test of the WISC-R and those who scored 7 or lower on the same test. Levels achieved on the experimental gross and fine motor short-term memory tests differed significantly within the ll-year-old group.

Students’ Use and Perceptions of Social Networking Technologies: Connections to Reading, Reading Ability, and Self-Perception

Abstract This study was undertaken to examine traditional forms of literacy and the newest form of literacy: technology. Students who have trouble reading traditional forms of literacy tend to have lower self-esteem. This research intended to explore if students with reading difficulties and, therefore, lower self-esteem, could use Social Networking Technologies including text messaging, Facebook, email, blogging, MySpace, or Twitter to help improve their self-esteem, in a field where spelling mistakes and grammatical errors are commonplace, if not encouraged. A collective case study was undertaken based on surveys, individual interviews, and gathered documents from 3 students 9-13 years old. The data collected in this study were analyzed and interpreted using qualitative methods. These cases were individually examined for themes, which were then analyzed across the cases to examine points of convergence and divergence in the data. The research found that students with reading difficulties do not necessarily have poor self-esteem, as prior research has suggested (Carr, Borkowski, & Maxwell, 1991; Feiler, & Logan, 2007; Meece, Wigfield, & Eccles, 1990; Pintirch & DeGroot, 1990; Pintrich & Garcia, 1991). All of the participants who had reading difficulties, were found both through interviews and the CFSEI-3 self-esteem test (Battle, 2002) to have average self-esteem, although their parents all stated that their child felt poorly about their academic abilities. The research also found that using Social Networking Technologies helped improve the self-esteem of the majority of the participants both socially and academically.