924 resultados para Lingüística computacional


Relevância:

20.00% 20.00%

Publicador:

Resumo:

Fil: Stamboni, Juan Luis. Universidad Nacional de La Plata. Facultad de Humanidades y Ciencias de la Educación; Argentina.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Esta ponencia toma como objeto uno de los tipos de cláusulas en infinitivo en español, específicamente construcciones absolutas introducidas por preposición; existen dos estructuras posibles: 1) P DET V(-finito) SDET; 2) P V(-finito) SDET. El V(-finito) puede ser transitivo o intransitivo, y la SDET es sujeto: el problema que presentan estas estructuras es la asignación de Caso (nominativo) a la SDET. Un planteo posible es considerar esta cuestión en el marco del Programa Minimalista, expuesto en Chomsky (1995 y 1998), utilizando las nociones de rasgo interpretable y rasgo no interpretable, la clasificación de Categorías Funcionales Centrales (CFC) y las operaciones del Componente Computacional (C(HL)): Fusión (Merge), Concordancia (Agree) y Movimiento (Move). Nuestra hipótesis es que el rasgo de Caso nominativo es, en español, inherente e interpretable. En van Gelderen (1997) se propone que los rasgos interpretables no causan Movimiento visible, a diferencia de los rasgos-phi, no interpretables, propios de las CFC, como persona. Esto permitirá explicar por qué las estructuras como las mencionadas convergen solamente cuando la SDET sujeto aparece en posición post-verbal

Relevância:

20.00% 20.00%

Publicador:

Resumo:

En trabajos anteriores (Romero, 2008a y b, Alabart Lago, L., P. Díaz y G. Herrera, 2012, Alabart Lago, L. y Herrera, G., 2013) se intentó mostrar que el mecanismo interpretativo que propone la TR podría resultar adecuado como uno de los sistemas externos (también interpretativos) postulados por la GG, más precisamente, el sistema llamado CI. La relación que intentamos establecer tendrá en cuenta lo siguiente como marco teórico: a) En TR se afirma que la interpretación de un enunciado se deriva de las estructuras sintácticas, y esta derivación se realiza "en paralelo" con la derivación de estructuras llevada a cabo por las operaciones del componente sintáctico. b) En las últimas propuestas de la GG, extensiones y revisiones del PM propuesto en Chomsky (1995) no solo se dejan de lado los niveles de representación internos SP y ES sino también se considera prescindible la interfaz FL (Chomsky, 2005). Las estructuras generadas se transfieren a los sistemas externos en cuanto rasgos formales de las Categorías Funcionales son valorados. Mantendremos la noción de que el sistema computacional es relativamente irrestricto y que sus operaciones son condicionadas solo por Atracción y las llamadas "condiciones de legibilidad" impuestas por los sistemas externos, fundamentalmente el Principio de Interpretación Completa (PIC). c) Tendremos en cuenta la propuesta de Leonetti y Escandell Vidal (2004), que sostiene que las CCFF de la GG pueden considerarse equivalentes a las Categoría Procedimentales propuestas por la TR. En este sentido consideraremos válida la afirmación de Chomsky (1998) acerca de que las CCFF centrales (C, T, v y D) tienen propiedades semánticas. d) Otro factor que tendremos en cuenta es la noción de fase en la derivación, considerándola correcta en los términos expuestos en Chomsky (2001 y 2005) y Gallego (2007 y 2009), con ciertas modificaciones. Nuestra hipótesis puede resumirse en lo siguiente: Las operaciones de extracción de inferencias propuestas por TR se aplican durante la derivación sintáctica independientemente de que se haya transferido o no una fase. Es más, esperamos poder demostrar que algunos mecanismos inferenciales imponen ciertas condiciones que afectan a la valoración de los rasgos de las CCFF. Pretendemos también intentar mostrar que además de los núcleos de fase reconocidos, C y v, debe considerarse fase a SD, porque contiene rasgos específicos de cuyo cotejo y valoración se desprende el valor que recibirán otros rasgos en el curso de la derivación. Con estos fundamentos esperamos poder elaborar una descripción de cómo interactúan ambos sistemas en la derivación de una oración y la asignación (casi simultánea) de significado

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Partiendo de los estudios de la interfaz semántico-sintáctica de Ken Hale y Jay Keyser (1993, 1998) y Jaume Mateu i Fontanals (2000, 2002), asumimos que la estructura argumental determinante de la organización de la sintaxis oracional tiene su origen en constructos semánticos sintácticamente estructurados. Estos constructos definen relaciones configuracionales entre predicados primitivos y argumentos. Existe, por lo tanto, una relación de transparencia entre la semántica y la sintaxis, la cual permite definir el significado oracional en función tanto del contenido conceptual-intencional, opaco para la sintaxis, como del constructo semántico, transparente para la sintaxis. A diferencia de otras propuestas, que postulan un máximo de cuatro constructos semánticos básicos, como es el caso de Hale y Keyser, o de tres constructos semánticos básicos, como es el caso de Mateu i Fontanals, proponemos que la Gramática Universal define un máximo de sólo dos constructos semánticos básicos, uno espacial y uno causativo, los cuales, por recursividad, darían origen a todas las configuraciones sintácticas de cualquier lengua natural. En un sistema lingüístico como el de la Morfología Distribuida, los constructos semánticos así definidos formarían parte de una lista "A" presintáctica, conformada por morfemas abstractos, vg. sin matriz fonológica asociada, los cuales codifican tanto rasgos intencionales-funcionales de índole procedimental, vg. instrucciones sobre la asignación de referencia, como raíces semántico-conceptuales de índole nominal, vg. entidades conceptuales genéricas. Estos constructos, seleccionables por el sistema computacional, definen esqueletos configuracionales básicos que organizan el ensamble de los morfemas abstractos pertinentes a cada derivación. Este modelo, por lo tanto, define la conformación composicional de los apareamientos entre significado y forma, a partir de procesos computacionales previos a la inserción de las piezas de vocabulario. Ofrecemos evidencia morfosintáctica que probaría la pertinencia y la productividad de un sistema binario de constructos semánticos

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The hospital is a place of complex actions, where several activities for serving the population are performed such as: medical appointments, exams, surgeries, emergency care, admission in wards and ICUs. These activities are mixed with anxiety, impatience, despair and distress of patients and their families, issues involving emotional balance both for professionals who provide services for them as for people cared by them. The healthcare crisis in Brazil is getting worse every year and today, constitutes a major problem for private hospitals. The patient that comes to emergencies progressively increase, and in contrast, there is no supply of hospital beds in the same proportion, causing overcrowding, declines in the quality of care delivered to patients, drain of professionals of the health area and difficulty in management the beds. This work presents a study that seeks to create an alternative tool that can contribute to the management of a private hospital beds. It also seeks to identify potential issues or deficiencies and therefore make changes in flow for an increase in service capacity, thus reducing costs without compromising the quality of services provided. The tool used was the Computational Simulation –based in discrete event, which aims to identify the main parameters to be considered for a proper modeling of this system. This study took as reference the admission of a private hospital, based on the current scenario, where your apartments are in saturation level as its occupancy rate. The relocation of project beds aims to meet the growing demand for surgeries and hospital admissions observed by the current administration.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The understanding of the occurrence and flow of groundwater in the subsurface is of fundamental importance in the exploitation of water, just like knowledge of all associated hydrogeological context. These factors are primarily controlled by geometry of a certain pore system, given the nature of sedimentary aquifers. Thus, the microstructural characterization, as the interconnectivity of the system, it is essential to know the macro properties porosity and permeability of reservoir rock, in which can be done on a statistical characterization by twodimensional analysis. The latter is being held on a computing platform, using image thin sections of reservoir rock, allowing the prediction of the properties effective porosity and hydraulic conductivity. For Barreiras Aquifer to obtain such parameters derived primarily from the interpretation of tests of aquifers, a practice that usually involves a fairly complex logistics in terms of equipment and personnel required in addition to high cost of operation. Thus, the analysis and digital image processing is presented as an alternative tool for the characterization of hydraulic parameters, showing up as a practical and inexpensive method. This methodology is based on a flowchart work involving sampling, preparation of thin sections and their respective images, segmentation and geometric characterization, three-dimensional reconstruction and flow simulation. In this research, computational image analysis of thin sections of rocks has shown that aquifer storage coefficients ranging from 0,035 to 0,12 with an average of 0,076, while its hydrogeological substrate (associated with the top of the carbonate sequence outcropping not region) presents effective porosities of the order of 2%. For the transport regime, it is evidenced that the methodology presents results below of those found in the bibliographic data relating to hydraulic conductivity, mean values of 1,04 x10-6 m/s, with fluctuations between 2,94 x10-6 m/s and 3,61x10-8 m/s, probably due to the larger scale study and the heterogeneity of the medium studied.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The developed study proposes a new computer modeling efficient and easy to apply in usual project situations to evaluate the interaction between masonry panels and support structure. The proposed model simulates the behavior of the wall exclusively using frame finite elements, thus compounding an equivalent frame. The validation was performed in two ways: firstly, through the analysis of various panels of generic plans, comparing the results obtained from equivalent frame model with the ones from a reference model, which uses shell finite elements in discretization of the walls; and in a second step, comparing with the results of the experimental model of Rosenhaupt. The analyzes considered the linear elastic behavior for materials and consisted basically in the evaluation of vertical displacements and efforts in support beams, and tensions at the base of walls. Was also evaluated, from flat and threedimensional modeling of some walls from a real project, important aspects of the wall-beam interaction, e.g.: the presence of openings of doors and windows, arranged in any position; conditions of support and linking of beams; interference of moorings between walls; and consideration of wind action. The analysis of the achieved results demonstrated the efficiency of the proposed modeling, since they have very similar aspects in the distribution of stresses and efforts, always with intensities slightly larger than those of the reference and experimental models.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The teaching-learning process requires a constant search on the part of educators for didatic innovations aimed at improving learning. Among these are technological innovations our students are familiar with. In human anatomy teaching, these innovations are increasingly important, since the need for “mechanizing” many structures may make learning tiresome and nonstimulating for students. The search for new technologies may make this process simpler. Another important issue is the need to constantly emphasize applying the knowledge in question, in order for students to better understand the meaning of learning. Accordingly, this project aims to develop an interactive tablet application for neck anatomy. This application will function as a guide to dissection, containing text, photographs, drawings and videos, distributed systematically, with a script emphasizing the clinical and surgical importance of neck anatomy.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The search for mitigation solutions, with respect to the effects of overvoltages linked to the energization and reclosing maneuvers of transmission lines include a challenging subject with strong impact on the insulation coordination of electrical systems. Although the recognition of classical and commercial proposals to mitigate these phenomena, other possibilities are certainly still worthwhile highlighting and investigations. In this context, the present work is grounded in the exposure of the physical and mathematical foundations of a strategy based on controlled switchings, whose moments to the line reclosing are pre-programmed. The computational evaluation of the effectiveness of the methodology is made using the ATP simulator, which are studies in a typical electrical system subjected to the action of short-circuits fallowed by shutdowns and subsequent reclosing, under the action of technology here focused and lack thereof.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

In this work are considered two bidimensional systems, with distints chacacteristcs and applicabilitys. Is studied the adsorption of transition metals (MT) Fe, Co, Mn and Ru in extended defects, formed by graphene grain boundaries. First in pristine graphene The hollow site of carbon hexagon, in pristine graphene, are the most stable for MT adsorption. The Dirac cone in eletronic structure of graphene was manteined with the presence of MT. For the considered grain boundaries the MT has a greater stability for absorption in the grain boundaries sites in comparison with pristine graphene. Through the energy barrier values, are observed diffusion chanels for MT localized on the grain boundaries. This diffusion chanels indicate a possible formation of nanolines of MT in graphene. For the first stage of the nanolines, ate observed a better stability for the system with greater MT concentration, due to MT-MT interactions. Also, due to the magnetic moment of the MT, the nanolines show a magnetization. For the most stable configurations the system are metallics, particularly for Fe the band structure indicates an anisotropic spin current. In a second study, are considereted the retention capacity for metallic contaminants Cd and Hg in clayminerals, kaolinite (KAO) and montmorillonite (MMT). Through the adsorption energies of contaminantes in the clayminerals, was observed a increase in stability with the increase of contaminants concentration, due to the interaction Cd-Cd and Hg-Hg. Also, was observed that KAO has a strong interaction beteween monolayers than MMT. In this sence, for the adsoption process of contaminantes in the natural form of KAO and MMT, the latter has a better retention capacity, due to the small net work for contaminant intercalation. However, when the modification of clayminerals, with molecules that increase the spacing between monolayers, exist a optimal condition, which the contaminant absorption are more stable in KAO system than in MMT. In the Langmuir adsorption model for the clayminerals in the optimal monolayer spacing, the retention capacity for Cd and Hg in KAO system are 21% greater than in MMT system. Also, for the X-ray Absorption Near Edge Spectroscopy (XANES) for the K edge of Cd and Hg, are found a positive shift of absorption edge with the decreasing of monolayer spacing. This result indicates a possible way to determine the concentration of adsorbed contaminats in relation to unabsorbed ones, from the decomposition of experimental XANES in the obteined spectras.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Este artículo sugiere un enfoque nuevo a la enseñanza de las dos estructuras gramaticales la pasiva refleja y el “se” impersonal para las clases universitarias de E/LE. Concretamente, se argumenta que las dos se deberían tratar como construcciones pasivas, basada en un análisis léxico-funcional de ellas que enfoca la lingüística contrastiva. Incluso para la instrucción de E/LE, se recomienda una aproximación contrastiva en la que se enfocan tanto la reflexión metalingüística como la competencia del estudiante en el L2. Específicamente, el uso de córpora lingüísticos en la clase forma una parte integral de la instrucción. El uso de un corpus estimula la curiosidad del estudiante, le expone a material de lengua auténtica, y promulga la reflexión inductiva independiente.