Carbon nanostructure based electrodes for high efficiency dye sensitized solar cell

Synthesis and functionalization of large-area graphene and its structural, electrical and electrochemical properties has been investigated. First, the graphene films, grown by thermal chemical vapor deposition (CVD), contain three to five atomic layers of graphene, as confirmed by Raman spectroscopy and high-resolution transmission electron microscopy. Furthermore, the graphene film is treated with CF4 reactive-ion plasma to dope fluorine ions into graphene lattice as confirmed by X-ray photoelectron spectroscopy (XPS) and UV-photoemission spectroscopy (UPS). Electrochemical characterization reveals that the catalytic activity of graphene for iodine reduction enhanced with increasing plasma treatment time, which is attributed to increase in catalytic sites of graphene for charge transfer. The fluorinated graphene is characterized as a counter-electrode (CE) in a dye-sensitized solar cell (DSSC) which shows ~ 2.56% photon to electron conversion efficiency with ~11 mAcm−2 current density. Second, the large scale graphene film is covalently functionalized with HNO3 for high efficiency electro-catalytic electrode for DSSC. The XPS and UPS confirm the covalent attachment of C-OH, C(O)OH and NO3- moieties with carbon atoms through sp2-sp3 hybridization and Fermi level shift of graphene occurs under different doping concentrations, respectively. Finally, CoS-implanted graphene (G-CoS) film was prepared using CVD followed by SILAR method. The G-CoS electro-catalytic electrodes are characterized in a DSSC CE and is found to be highly electro-catalytic towards iodine reduction with low charge transfer resistance (Rct ~5.05 Ωcm 2) and high exchange current density (J0~2.50 mAcm -2). The improved performance compared to the pristine graphene is attributed to the increased number of active catalytic sites of G-CoS and highly conducting path of graphene. We also studied the synthesis and characterization of graphene-carbon nanotube (CNT) hybrid film consisting of graphene supported by vertical CNTs on a Si substrate. The hybrid film is inverted and transferred to flexible substrates for its application in flexible electronics, demonstrating a distinguishable variation of electrical conductivity for both tension and compression. Furthermore, both turn-on field and total emission current was found to depend strongly on the bending radius of the film and were found to vary in ranges of 0.8 - 3.1 V/μm and 4.2 - 0.4 mA, respectively.

Bioquímica quântica na diferenciação dos níveis de ativação de receptores AMPA por agonistas parciais Wilardina

In the central nervous system (CNS) of mammalian, fast synaptic transmission between nerve cells is performed primarily by α-amino-3-hydroxy-5-methyl-4- isoxazolepropionic acid (AMPA) receptors, an ionotropic glutamate receptor that is related with learning, memory and homeostasis of the nervous system. Impairments in their functions are correlated with development of many brain desorders, such as epilepsy, schizophrenia, autism, Parkinson and Alzheimer. The use of willardiine analogs has been shown a powerful tool to understanding of activation and desensitization mechanisms of this receptors, because the modification of a single ligand atom allows the observation of varying levels of efficacy. In this work, taking advantage of Fluorine Willardiine (1.35Å), Hydrogen Willardiine (1.65Å), Bromine Willardiine (1.8Å) and Iodine Willardiine (2.15Å) structures co-crystalized with GluA2 with codes 1MQI, 1MQJ, 1MQH and 1MQG, we attempted to energetically differentiate the four ligands efficacy. The complexes were submitted to energetic calculations based on density functional theory (DFT), under the optics of molecular fractionation with conjugate caps (MFCC) method. Obtained results show a relationship between the energetic values and willardiines efficacy order (FW> HW > BrW > IW), also show the importance of E705, R485, Y450, S654, T655, T480 e P478 as the amino acids that contribute most strongly with the interaction of four partial agonists. Furthermore, we outlined the M708 behaviour, attracted by FW and HW ligands, and repels by BrW and IW. With the datas reported on this work, it is possible for a better understanding of the AMPA receptor, which can serve as an aid in the development of new drugs for this system.

Estudo do domínio segurança/proteção da NANDA internacional em pacientes de unidade de terapia intensiva

The study aimed to analyze the field of nursing diagnoses safety / protection of NANDA International present in patients in the Intensive Care Unit. This is a crosssectional study in intensive care complex of a university hospital in northeastern Brazil. The research took place in two stages. The first step was to collect data through an interview form and physical examination, with 86 patients admitted to the unit, during the months of December 2013 to May 2014. Spreadsheets were built in Microsoft Office Excel 2010 Software in which were marked by the researcher of this study, the presence or absence of defining characteristics, related factors and risk factors of the 31 studied diagnoses. In the second stage, held between July and August 2014, the sheets were sent to three diagnosticians, previously trained to perform the diagnostic inference. Data were analyzed using descriptive and inferential statistics for the diagnoses that showed higher frequencies than 50%, using IBM SPSS version 20.0 for Statistic Windows.O project was approved by the 440/414 and Presentation Certificate for Ethics Assessment number 22955113 .2.0000.5292. The results indicated the presence of 29 field of nursing diagnoses safety / protection in hospital clientele in the Intensive Care Unit, of which five were present in 100% of patients, namely: Risk of contamination, injury risk, falls risk,risk of allergic response and risk of trauma. Diagnoses that presented more frequently than 50% were: Risk of infection, dry eye risk, poisoning risk, vascular trauma risk, impaired skin integrity, impaired dentition, bleeding risk, risk imbalance in body temperature, Risk perioperative positioning injury, impaired tissue integrity, peripheral neurovascular dysfunction Risk, Risk adverse response to contrast media with iodine, shock Hazard and Risk of aspiration. For these analyzes, we identified 35 risk factors, 11 defining characteristics and three related factors showed statistically significant association with the studied diagnoses. For diagnostics: Risk of contamination, injury risk, falls risk, allergic response risk, trauma Risk, Risk of infection, dry eye risk and risk poisoning there was no association with any of their risk factors. We conclude that most of the area of nursing diagnoses safety / protection feature is prevalent in critically ill patients, with special attention to the risk diagnoses. There was a significant association between these diagnoses and its components. It is noteworthy, therefore, that the lifting of this profile contributes relevant clues to the inference of the priority nursing diagnoses domain safety / protection in the study population, supporting the practice of nursing and stimulating knowledge on the subject.

Concentração do óleo de girassol em compostos insaturados utilizando destilação molecular

Vegetable oils are characterized as important raw materials in the supplying of natural substances of interest pharmaceutical, food and cosmetic industry. Sunflower oil stands out for its important composition present in unsaturated fatty acids such as oleic acid (C18:1) and linoleic (C18:2), responsible for many health benefits. The main objective of this study is obtain enriched fractions in unsaturated compounds from refined sunflower oil. The oil used in this study was characterized by the determination of some properties, like iodine number, acid number and viscosity. A transesterification was done to transform the triglycerides into their corresponding methyl esters of fatty acids. These was submitted the molecular distillation process, for present as an efficient alternative to separation and purification of these substances, using high vacuum and low temperatures. Of the esters fractions that was obtained, were analyzed by gas chromatography. The experimental design technique was used to evaluate the influence of the temperature variation of evaporation and condensation system on the percentage obtained residue. The evaporator temperature proved to be the most influential variable on the studied response. The optimized conditions for the answer was studied at 100 °C for evaporator temperature and 10 °C for the condenser temperature. The graph of "split ratio" showed that for the lowest flow feed (1 mL/min) and higher evaporator temperature (110 °C) was obtained in the largest fraction of distillate. It also used the study of the influence of evaporator temperature on the concentration of unsaturated compounds. The best operating conditions for temperature was 90 °C reached 82.21 % of unsaturated compounds. Elimination curves of the unsaturated compounds present in the distillate stream were obtained. The simulation results of the molecular distillation process of sunflower oil showed the concentration profiles for three different feed flow rates. The speed, temperature and thickness profiles of the liquid film were obtained. The speed of the film increases as the fluid flows through the walls of the evaporator, reaching a maximum on length of 0.075 m. The film thickness decreases on the route, since many compounds are volatilized. The result of the temperature profile had to be consistent with the literature reproduced, being constant after reaching the maximum operating temperature in the length of 0.15 m. This study allowed characterizing and focusing, through experimental analysis, unsaturated compounds and observing the sunflower oil´s behavior through process simulation.

Concentração do óleo de girassol em compostos insaturados utilizando destilação molecular

Vegetable oils are characterized as important raw materials in the supplying of natural substances of interest pharmaceutical, food and cosmetic industry. Sunflower oil stands out for its important composition present in unsaturated fatty acids such as oleic acid (C18:1) and linoleic (C18:2), responsible for many health benefits. The main objective of this study is obtain enriched fractions in unsaturated compounds from refined sunflower oil. The oil used in this study was characterized by the determination of some properties, like iodine number, acid number and viscosity. A transesterification was done to transform the triglycerides into their corresponding methyl esters of fatty acids. These was submitted the molecular distillation process, for present as an efficient alternative to separation and purification of these substances, using high vacuum and low temperatures. Of the esters fractions that was obtained, were analyzed by gas chromatography. The experimental design technique was used to evaluate the influence of the temperature variation of evaporation and condensation system on the percentage obtained residue. The evaporator temperature proved to be the most influential variable on the studied response. The optimized conditions for the answer was studied at 100 °C for evaporator temperature and 10 °C for the condenser temperature. The graph of "split ratio" showed that for the lowest flow feed (1 mL/min) and higher evaporator temperature (110 °C) was obtained in the largest fraction of distillate. It also used the study of the influence of evaporator temperature on the concentration of unsaturated compounds. The best operating conditions for temperature was 90 °C reached 82.21 % of unsaturated compounds. Elimination curves of the unsaturated compounds present in the distillate stream were obtained. The simulation results of the molecular distillation process of sunflower oil showed the concentration profiles for three different feed flow rates. The speed, temperature and thickness profiles of the liquid film were obtained. The speed of the film increases as the fluid flows through the walls of the evaporator, reaching a maximum on length of 0.075 m. The film thickness decreases on the route, since many compounds are volatilized. The result of the temperature profile had to be consistent with the literature reproduced, being constant after reaching the maximum operating temperature in the length of 0.15 m. This study allowed characterizing and focusing, through experimental analysis, unsaturated compounds and observing the sunflower oil´s behavior through process simulation.

Data on the biogeochemical cycle of methane in the ocean

Geological, mineralogical and microbiological aspects of the methane cycle in water and sediments of different areas in the oceans are under consideration in the monograph. Original and published estimations of formation- and oxidation rates of methane with use of radioisotope and isotopic methods are given. The role of aerobic and anaerobic microbial oxidation of methane in production of organic matter and in formation of authigenic carbonates is considered. Particular attention is paid to processes of methane transformation in areas of its intensive input to the water column from deep-sea hydrothermal sources, mud volcanoes, and cold methane seeps.

Biogenic halocarbons from the Peruvian upwelling region during METEOR cruise M91

Halocarbons, halogenated short-chained hydrocarbons, are produced naturally in the oceans by biological and chemical processes. They are emitted from surface seawater into the atmosphere, where they take part in numerous chemical processes such as ozone destruction and the oxidation of mercury and dimethyl sulfide. Here we present oceanic and atmospheric halocarbon data for the Peruvian upwelling obtained during the M91 cruise onboard the research vessel Meteor in December 2012. Surface waters during the cruise were characterized by moderate concentrations of bromoform (CHBr3) and dibromomethane (CH2Br2) correlating with diatom biomass derived from marker pigment concentrations, which suggests this phytoplankton group as likely source. Concentrations measured for the iodinated compounds methyl iodide (CH3I) of up to 35.4 pmol L-1, chloroiodomethane (CH2ClI) of up to 58.1 pmol L-1 and diiodomethane (CH2I2) of up to 32.4 pmol L-1 in water samples were much higher than previously reported for the tropical Atlantic upwelling systems. Iodocarbons also correlated with the diatom biomass and even more significantly with dissolved organic matter (DOM) components measured in the surface water. Our results suggest a biological source of these compounds as significant driving factor for the observed large iodocarbon concentrations. Elevated atmospheric mixing ratios of CH3I (up to 3.2 ppt), CH2ClI (up to 2.5 ppt) and CH2I2 (3.3 ppt) above the upwelling were correlated with seawater concentrations and high sea-to-air fluxes. The enhanced iodocarbon production in the Peruvian upwelling contributed significantly to tropospheric iodine levels.

Dosimetric Evaluation of Metal Artefact Reduction using Metal Artefact Reduction (MAR) Algorithm and Dual-energy Computed Tomography (CT) Method

Purpose: Computed Tomography (CT) is one of the standard diagnostic imaging modalities for the evaluation of a patient’s medical condition. In comparison to other imaging modalities such as Magnetic Resonance Imaging (MRI), CT is a fast acquisition imaging device with higher spatial resolution and higher contrast-to-noise ratio (CNR) for bony structures. CT images are presented through a gray scale of independent values in Hounsfield units (HU). High HU-valued materials represent higher density. High density materials, such as metal, tend to erroneously increase the HU values around it due to reconstruction software limitations. This problem of increased HU values due to metal presence is referred to as metal artefacts. Hip prostheses, dental fillings, aneurysm clips, and spinal clips are a few examples of metal objects that are of clinical relevance. These implants create artefacts such as beam hardening and photon starvation that distort CT images and degrade image quality. This is of great significance because the distortions may cause improper evaluation of images and inaccurate dose calculation in the treatment planning system. Different algorithms are being developed to reduce these artefacts for better image quality for both diagnostic and therapeutic purposes. However, very limited information is available about the effect of artefact correction on dose calculation accuracy. This research study evaluates the dosimetric effect of metal artefact reduction algorithms on severe artefacts on CT images. This study uses Gemstone Spectral Imaging (GSI)-based MAR algorithm, projection-based Metal Artefact Reduction (MAR) algorithm, and the Dual-Energy method.

Materials and Methods: The Gemstone Spectral Imaging (GSI)-based and SMART Metal Artefact Reduction (MAR) algorithms are metal artefact reduction protocols embedded in two different CT scanner models by General Electric (GE), and the Dual-Energy Imaging Method was developed at Duke University. All three approaches were applied in this research for dosimetric evaluation on CT images with severe metal artefacts. The first part of the research used a water phantom with four iodine syringes. Two sets of plans, multi-arc plans and single-arc plans, using the Volumetric Modulated Arc therapy (VMAT) technique were designed to avoid or minimize influences from high-density objects. The second part of the research used projection-based MAR Algorithm and the Dual-Energy Method. Calculated Doses (Mean, Minimum, and Maximum Doses) to the planning treatment volume (PTV) were compared and homogeneity index (HI) calculated.

Results: (1) Without the GSI-based MAR application, a percent error between mean dose and the absolute dose ranging from 3.4-5.7% per fraction was observed. In contrast, the error was decreased to a range of 0.09-2.3% per fraction with the GSI-based MAR algorithm. There was a percent difference ranging from 1.7-4.2% per fraction between with and without using the GSI-based MAR algorithm. (2) A range of 0.1-3.2% difference was observed for the maximum dose values, 1.5-10.4% for minimum dose difference, and 1.4-1.7% difference on the mean doses. Homogeneity indexes (HI) ranging from 0.068-0.065 for dual-energy method and 0.063-0.141 with projection-based MAR algorithm were also calculated.

Conclusion: (1) Percent error without using the GSI-based MAR algorithm may deviate as high as 5.7%. This error invalidates the goal of Radiation Therapy to provide a more precise treatment. Thus, GSI-based MAR algorithm was desirable due to its better dose calculation accuracy. (2) Based on direct numerical observation, there was no apparent deviation between the mean doses of different techniques but deviation was evident on the maximum and minimum doses. The HI for the dual-energy method almost achieved the desirable null values. In conclusion, the Dual-Energy method gave better dose calculation accuracy to the planning treatment volume (PTV) for images with metal artefacts than with or without GE MAR Algorithm.

Nutritional status of lactating mothers and their children 6-23 months of age in pre- and post-harvest seasons in two agro-ecological zones of rural Ethiopia

The objective of this study was to assess seasonal variation in nutritional status and feeding practices among lactating mothers and their children 6-23 months of age in two different agro-ecological zones of rural Ethiopia (lowland zone and midland zone). Food availability and access are strongly affected by seasonality in Ethiopia. However, there are few published data on the effects of seasonal food fluctuations on nutritional status and dietary diversity patterns of mothers and children in rural Ethiopia. A longitudinal study was conducted among 216 mothers in two agro-ecological zones of rural Ethiopia during pre and post-harvest seasons. Data were collected on many parameters including anthropometry, blood levels of haemoglobin and ferritin and zinc, urinary iodine levels, questionnaire data regarding demographic and household parameters and health issues, and infant and young child feeding practices, 24 h food recall to determine dietary diversity scores, and household use of iodized salt. Chi-square and multivariable regression models were used to identify independent predictors of nutritional status. A wide variety of results were generated including the following highlights. It was found that 95.4% of children were breastfed, of whom 59.7% were initially breastfed within one hour of birth, 22.2% received pre-lacteal feeds, and 50.9% of children received complementary feedings by 6 months of age. Iron deficiency was found in 44.4% of children and 19.8% of mothers. Low Zinc status was found in 72.2% of children and 67.3% of mothers. Of the study subjects, 52.5% of the children and 19.1% of the mothers were anaemic, and 29.6% of children and 10.5% of mothers had iron deficiency anaemia. Among the mothers with low serum iron status, 81.2% and 56.2% of their children had low serum zinc and iron, respectively. Similarly, among the low serum zinc status mothers, 75.2% and 45.3% of their children had low serum in zinc and iron, respectively. There was a strong correlation between the micronutrient status of the mothers and the children for ferritin, zinc and haemoglobin (P <0.001). There was also statistically significant difference between agro-ecological zones for micronutrient deficiencies among the mothers (p<0.001) but not for their children. The majority (97.6%) of mothers in the lowland zone were deficient in at least one micronutrient biomarker (zinc or ferritin or haemoglobin). Deficiencies in one, two, or all three biomarkers of micronutrient status were observed in 48.1%, 16.7% and 9.9% of mothers and 35.8%, 29.0%, and 23.5%, of children, respectively. Additionally, about 42.6% of mothers had low levels of urinary iodine and 35.2% of lactating mothers had goitre. Total goitre prevalence rates and urinary iodine levels of lactating mothers were not significantly different across agro-ecological zones. Adequately iodised salt was available in 36.6% of households. The prevalence of anaemia increased from post-harvest (21.8%) to pre-harvest seasons (40.9%) among lactating mothers. Increases were from 8.6% to 34.4% in midland and from 34.2% to 46.3% in lowland agro-ecological zones. Fifteen percent of mothers were anaemic during both seasons. Predictors of anaemia were high parity of mother and low dietary diversity. The proportion of stunted and underweight children increased from 39.8% and 27% in post-harvest season to 46.0% and 31.8% in pre-harvest season, respectively. However, wasting in children decreased from 11.6% to 8.5%. Major variations in stunting and underweight were noted in midland compared to lowland agroecological zones. Anthropometric measurements in mothers indicated high levels of undernutrition. The prevalence of undernutrition in mothers (BMI <18.5kg/m2) increased from 41.7 to 54.7% between post- and pre-harvest seasons. The seasonal effect was generally higher in the midland community for all forms of malnutrition. Parity, number of children under five years and regional variation were predictors of low BMI among lactating mothers. There were differences in minimum meal frequency, minimum acceptable diet and dietary diversity in children in pre-harvest and post-harvest seasons and these parameters were poor in both seasons. Dietary diversity among mothers was higher in lowland zone but was poor in both zones across the seasons. In conclusion, malnutrition and micronutrient deficiencies are very prevalent among lactating mothers and their children 6-23 months old in the study areas. There are significant seasonal variations in malnutrition and dietary diversity, in addition to significant differences between lowland and midland agro-ecological zones. These findings suggest a need to design effective preventive public health nutrition programs to address both the mothers’ and children’s needs particularly in the preharvest season.