998 resultados para Hiperparatiroidismo primário


Relevância:

10.00% 10.00%

Publicador:

Resumo:

The nurses in the hemodialysis has an important role in the nursing process implementation, in the context of a theoretical referential. Among the nursing theories, highlights the Roy´s adaptations model, who considers a person as an holistic adaptive system that aims to adapt customers to different living conditions. Thus, it is believed that the Roy´s nursing process will guide nursing care to patients on dialysis. Therefore, the study aimed to analyze the nursing diagnosis present in patients with chronic kidney disease on hemodialysis based on the theoretical model of Roy and NANDA-International. Descriptive and cros-sectional study, performed at a dialysis center in a city in northeastern Brazil. Sample of 178 patients and consecutive sampling by convenience. Data collection ocurred from October/2011 until February/2012, through interview and physical examination forms. Data analysis was initiated by clinical reasoning, diagnosis judgment and similarity relation. Then, the data were entered into SPSS program, 16.0 version, generating descriptive statistics. The project was approved by the Ethics Research Committee (protocol nº 115/11) with a Presentation Certificate for Ethics Appreciation (in 0139.0.051.000-111) and was funded by the Universal edict MCT / CNPq 14/2010. The results revealed that most patients were male (52.2%), married (62.9%) and residents in the Natal´s metropolitan region (54.5%). The mean age was 46.6 years and the years of study, 8,5. Regarding nursing diagnosis obtained an average of 6.6, especially: Risk of Infection (100%), excessive fluid volume (99.4%) and hypothermia (61.8%). On the other hand the adaptive problems average was 6.4, and the most common: intracellular fluid retention (99.4%); Hyperkalemia (64.6%); Hypothermia (61.8%) and edema (53.9%). Were established 20 similarity relations between the NANDA-International nursing diagnosis and adaptive problems of Roy, namely: risk of falls / injury risk and potential for injury, impaired physical mobility and walking mobility and / or restricted coordination, dressing self-care deficit and loss of self-care ability; hypothermia and hypothermia; impaired skin integrity and impaired skin integrity; excessive fluid volume and intracellular fluid retention / Hyperkalemia / Hypocalcemia / edema; imbalanced nutrition: less than body requirements and Nutrition less than the body's needs; constipation and constipation, acute pain and acute pain, chronic pain and chronic pain, sensorial perception disturbed: visual, tactile and auditory disabilities and a primary sense: sight, hearing and tactile; sleep deprivation and insomnia, fatigue and intolerance to activities; ineffective self health and fails in the role; sexual dysfunction and sexual dysfunction; situational low self-esteem and low self-esteem, and diarrhea and diarrhea. We conclude that there is similarity between the typologies and was required a model´s analysis, because they present different ways to establish the nursing diagnosis. Moreover, the nursing process use, under the context of a theory and a classification system, subsidizes the care and contributes to the strengthening of nursing science

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The usual programs for load flow calculation were in general developped aiming the simulation of electric energy transmission, subtransmission and distribution systems. However, the mathematical methods and algorithms used by the formulations were based, in majority, just on the characteristics of the transmittion systems, which were the main concern focus of engineers and researchers. Though, the physical characteristics of these systems are quite different from the distribution ones. In the transmission systems, the voltage levels are high and the lines are generally very long. These aspects contribute the capacitive and inductive effects that appear in the system to have a considerable influence in the values of the interest quantities, reason why they should be taken into consideration. Still in the transmission systems, the loads have a macro nature, as for example, cities, neiborhoods, or big industries. These loads are, generally, practically balanced, what reduces the necessity of utilization of three-phase methodology for the load flow calculation. Distribution systems, on the other hand, present different characteristics: the voltage levels are small in comparison to the transmission ones. This almost annul the capacitive effects of the lines. The loads are, in this case, transformers, in whose secondaries are connected small consumers, in a sort of times, mono-phase ones, so that the probability of finding an unbalanced circuit is high. This way, the utilization of three-phase methodologies assumes an important dimension. Besides, equipments like voltage regulators, that use simultaneously the concepts of phase and line voltage in their functioning, need a three-phase methodology, in order to allow the simulation of their real behavior. For the exposed reasons, initially was developped, in the scope of this work, a method for three-phase load flow calculation in order to simulate the steady-state behaviour of distribution systems. Aiming to achieve this goal, the Power Summation Algorithm was used, as a base for developing the three phase method. This algorithm was already widely tested and approved by researchers and engineers in the simulation of radial electric energy distribution systems, mainly for single-phase representation. By our formulation, lines are modeled in three-phase circuits, considering the magnetic coupling between the phases; but the earth effect is considered through the Carson reduction. It s important to point out that, in spite of the loads being normally connected to the transformer s secondaries, was considered the hypothesis of existence of star or delta loads connected to the primary circuit. To perform the simulation of voltage regulators, a new model was utilized, allowing the simulation of various types of configurations, according to their real functioning. Finally, was considered the possibility of representation of switches with current measuring in various points of the feeder. The loads are adjusted during the iteractive process, in order to match the current in each switch, converging to the measured value specified by the input data. In a second stage of the work, sensibility parameters were derived taking as base the described load flow, with the objective of suporting further optimization processes. This parameters are found by calculating of the partial derivatives of a variable in respect to another, in general, voltages, losses and reactive powers. After describing the calculation of the sensibility parameters, the Gradient Method was presented, using these parameters to optimize an objective function, that will be defined for each type of study. The first one refers to the reduction of technical losses in a medium voltage feeder, through the installation of capacitor banks; the second one refers to the problem of correction of voltage profile, through the instalation of capacitor banks or voltage regulators. In case of the losses reduction will be considered, as objective function, the sum of the losses in all the parts of the system. To the correction of the voltage profile, the objective function will be the sum of the square voltage deviations in each node, in respect to the rated voltage. In the end of the work, results of application of the described methods in some feeders are presented, aiming to give insight about their performance and acuity

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The usual programs for load flow calculation were in general developped aiming the simulation of electric energy transmission, subtransmission and distribution systems. However, the mathematical methods and algorithms used by the formulations were based, in majority, just on the characteristics of the transmittion systems, which were the main concern focus of engineers and researchers. Though, the physical characteristics of these systems are quite different from the distribution ones. In the transmission systems, the voltage levels are high and the lines are generally very long. These aspects contribute the capacitive and inductive effects that appear in the system to have a considerable influence in the values of the interest quantities, reason why they should be taken into consideration. Still in the transmission systems, the loads have a macro nature, as for example, cities, neiborhoods, or big industries. These loads are, generally, practically balanced, what reduces the necessity of utilization of three-phase methodology for the load flow calculation. Distribution systems, on the other hand, present different characteristics: the voltage levels are small in comparison to the transmission ones. This almost annul the capacitive effects of the lines. The loads are, in this case, transformers, in whose secondaries are connected small consumers, in a sort of times, mono-phase ones, so that the probability of finding an unbalanced circuit is high. This way, the utilization of three-phase methodologies assumes an important dimension. Besides, equipments like voltage regulators, that use simultaneously the concepts of phase and line voltage in their functioning, need a three-phase methodology, in order to allow the simulation of their real behavior. For the exposed reasons, initially was developped, in the scope of this work, a method for three-phase load flow calculation in order to simulate the steady-state behaviour of distribution systems. Aiming to achieve this goal, the Power Summation Algorithm was used, as a base for developping the three phase method. This algorithm was already widely tested and approved by researchers and engineers in the simulation of radial electric energy distribution systems, mainly for single-phase representation. By our formulation, lines are modeled in three-phase circuits, considering the magnetic coupling between the phases; but the earth effect is considered through the Carson reduction. Its important to point out that, in spite of the loads being normally connected to the transformers secondaries, was considered the hypothesis of existence of star or delta loads connected to the primary circuit. To perform the simulation of voltage regulators, a new model was utilized, allowing the simulation of various types of configurations, according to their real functioning. Finally, was considered the possibility of representation of switches with current measuring in various points of the feeder. The loads are adjusted during the iteractive process, in order to match the current in each switch, converging to the measured value specified by the input data. In a second stage of the work, sensibility parameters were derived taking as base the described load flow, with the objective of suporting further optimization processes. This parameters are found by calculating of the partial derivatives of a variable in respect to another, in general, voltages, losses and reactive powers. After describing the calculation of the sensibility parameters, the Gradient Method was presented, using these parameters to optimize an objective function, that will be defined for each type of study. The first one refers to the reduction of technical losses in a medium voltage feeder, through the installation of capacitor banks; the second one refers to the problem of correction of voltage profile, through the instalation of capacitor banks or voltage regulators. In case of the losses reduction will be considered, as objective function, the sum of the losses in all the parts of the system. To the correction of the voltage profile, the objective function will be the sum of the square voltage deviations in each node, in respect to the rated voltage. In the end of the work, results of application of the described methods in some feeders are presented, aiming to give insight about their performance and acuity

Relevância:

10.00% 10.00%

Publicador:

Resumo:

A modelagem de processos industriais tem auxiliado na produção e minimização de custos, permitindo a previsão dos comportamentos futuros do sistema, supervisão de processos e projeto de controladores. Ao observar os benefícios proporcionados pela modelagem, objetiva-se primeiramente, nesta dissertação, apresentar uma metodologia de identificação de modelos não-lineares com estrutura NARX, a partir da implementação de algoritmos combinados de detecção de estrutura e estimação de parâmetros. Inicialmente, será ressaltada a importância da identificação de sistemas na otimização de processos industriais, especificamente a escolha do modelo para representar adequadamente as dinâmicas do sistema. Em seguida, será apresentada uma breve revisão das etapas que compõem a identificação de sistemas. Na sequência, serão apresentados os métodos fundamentais para detecção de estrutura (Modificado Gram- Schmidt) e estimação de parâmetros (Método dos Mínimos Quadrados e Método dos Mínimos Quadrados Estendido) de modelos. No trabalho será também realizada, através dos algoritmos implementados, a identificação de dois processos industriais distintos representados por uma planta de nível didática, que possibilita o controle de nível e vazão, e uma planta de processamento primário de petróleo simulada, que tem como objetivo representar um tratamento primário do petróleo que ocorre em plataformas petrolíferas. A dissertação é finalizada com uma avaliação dos desempenhos dos modelos obtidos, quando comparados com o sistema. A partir desta avaliação, será possível observar se os modelos identificados são capazes de representar as características estáticas e dinâmicas dos sistemas apresentados nesta dissertação

Relevância:

10.00% 10.00%

Publicador:

Resumo:

In the execution of civil engineering works, either by wasting during the coating of wall or demolition of gypsum walls, the generation of the gypsum waste involves serious environmental concerns. These concerns are increased by the high demand of this raw material in the sector and by the difficulties of proper disposal byproduct generated. In the search for alternatives to minimize this problem, many research works are being conducted, giving emphasis in using gypsum waste as fillers in composites materials in order to improve the acoustic, thermal and mechanical performances. Through empirical testing, it was observed that the crystallization water contained in the residue (CaSO4.2H2O) could act like primary agent in the expanding of the polyurethane foam. Considering that polyurethane produced from vegetable oils are biodegradable synthetic polymers and that are admittedly to represent an alternative to petrochemical synthetic polyurethane, this research consist an analysis of the thermal behavior of a composite whose matrix obtained from a resin derived from the expansive castor oil seed, with loads of 4%, 8%, 12% and 16% of gypsum waste replacing to the polyol prepolymer blend. Contributors to this analysis: a characterization of the raw material through analysis of spectroscopy by Fourier transform infrared (FTIR), chemical analysis by X-Ray Fluorescence (XRF) and mineralogical analysis by X Ray Diffraction (XRD), complemented by thermo gravimetric analysis (TGA). In order to evaluate the thermo physical properties and thermal behavior of the composites manufactured in die closed with expansion contained, were also carried tests to determine the percentage of open pore volume using a gas pycnometer, scanning electronic microscopy (SEM), in addition to testing of flammability and the resistance to contact with hot surfaces. Through the analysis of the results, it appears that it is possible to produce a new material, which few changes in their thermo physical properties and thermal performance, promotes significant changes and attractive to the environment

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Nas culturas agrícolas as plantas daninhas devem ser controladas de modo a não afetar negativamente o rendimento e a qualidade do produto colhido. Deste modo, quantidades pequenas de plantas daninhas em um campo, na maioria dos casos, não é um problema, exceto na produção de sementes. Ressalta-se que em gramados não existe um componente de produção a se colhido. O valor do gramado é a sua qualidade inerente a estética e usabilidade. Qualidade estética é a beleza e o valor que acrescenta ao gramado em uma paisagem gerenciada. Usabilidade pode ser a durabilidade de um campo de esporte ou a redução na perda de solo pela erosão da água ou do vento. A presença de qualquer planta daninha em gramados pode diminuir a qualidade estética e usabilidade do gramado. Enquanto for possível reduzir a população de plantas daninhas utilizando práticas culturais ou mecânicas, não se poderá eliminá-las completamente. A utilização de herbicidas é a única maneira de controlar completamente as plantas daninhas em áreas de gramados. Esta revisão irá rever os principais herbicidas utilizados em gramados nos Estados Unidos com relação a seus modos de ação, a família de herbicidas e uso primário no gramado.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

O objetivo deste trabalho foi testar métodos de seleção visando ao aumento de flores femininas na população FCA-UNESP-PB de mamona (Ricinus communis L.). A seleção foi realizada no município de Botucatu (SP), na safrinha de 2007. Por meio de seleção massal, foram selecionadas plantas com racemo primário estritamente feminino. Destas plantas, as que tinham reversão sexual foram autofecundadas. As avaliações foram realizadas na safrinha de 2008 em Botucatu e São Manuel (SP), onde foram comparados os tratamentos: método de seleção massal; método de seleção massal com autofecundação e testemunha (racemos de plantas colhidos ao acaso, sem seleção). Foram avaliados: porcentagem de flores femininas do racemo primário (%), produtividade de grãos (kg ha-1) e teor de óleo das sementes (%). O delineamento experimental utilizado foi o de blocos casualizados com 30 repetições. Os dados foram submetidos à análise de variância individual para cada local e conjuntamente para os dois locais, pelo teste F a 1% de probabilidade. Mediante os resultados conclui- se que o método de seleção massal com autofecundação foi aquele que proporcionou maiores valores de porcentagem de flores femininas no racemo primário, com ganho fenotípico realizado de 18% em Botucatu e 29% em São Manuel (SP). Por meio dos métodos de seleção, notou-se comportamento diferencial em relação aos locais para a característica produtividade de grãos, e o método seleção massal com autofecundação proporcionou a menor produtividade. No teor de óleo não houve diferenças significativas entre os métodos e os locais avaliados.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The shrimp farming is a process of creation of shrimp that has been growing rapidly in the country, occupying a meaningful space in the Brazilian exporting. In 2003, this activity presented a volume of 60 millions of tons and 220 millions of dollars, being the main generator of employment and income of the primary sector of the northeast economy. However, it is a new activity with c.a. five years in the Rio Grande do Norte State and therefore needs investment in the technological area. Among the wastewaters of this activity, the sulphite solution is being usually applied in the process of fishing, i.e. retrieval of the shrimps from the farming. The aim of this work is to present the oxidation experimental results of the sulphite that may be and to determine what it s the most efficient method, trough laboratory experiments. The measurements were carried out in a mixing reactor inserting air and with hydrogen peroxide addition with and without UV light. The solutions were prepared synthetically with concentrations found in the wastewater of fishing and also collected in locu. The oxidation process using air was monitorated by iodometric analysis for the sulphite and the oxidation using hydrogen peroxide was evaluated with turbidimetric analysis for sulphate, by spectrophotometer. The sulphite was totally oxidized in both processes. The experimental results permit to conclude that the oxidation by hydrogen peroxide is more efficient and allowed to determine the optimum operational conditions in terms of concentration and time of treatment

Relevância:

10.00% 10.00%

Publicador:

Resumo:

O objetivo deste trabalho foi avaliar a influência de doses de calcário e zinco e, a interação destes sobre o desenvolvimento da cultura da mamona. A hipótese deste trabalho é que o aumento de doses de calcário diminui a disponibilidade de zinco no solo para a planta. O experimento foi desenvolvido em estufa para cultivo protegido, sem controle de temperatura, em vasos com 17 dm³ de Latossolo Vermelho distrófico, textura média. O delineamento experimental foi em blocos casualizados, com quatro repetições. Os tratamentos foram arranjados num esquema fatorial 3 x 5, sendo os fatores: três saturações por bases (40, 60 e 80%) e cinco doses adicionadas de Zn (0,5; 1,0; 2,0; 4,0 e 8,0 mg dm-3 de solo). Apenas uma planta por vaso foi conduzida até 174 dias após emergência (maturidade fisiológica do racemo primário), quando foi avaliada a produção. Maiores doses de calcário resultaram em maior número de grãos por planta e MS dos grãos por planta. Houve interação V% e Zn na altura da planta, massa seca da raiz, comprimento da parte masculina e total do racemo. No entanto, nenhum destes incrementos refletiu em diferença significativa na massa de 100 grãos da mamoneira.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

During production of oil and gas, there is also the production of an aqueous effluent called produced water. This byproduct has in its composition salts, organic compounds, gases and heavy metals. This research aimed to evaluate the integration of processes Induced Air Flotation (IAF) and photo-Fenton for reducing the Total Oils and Greases (TOG) present in produced water. Experiments were performed with synthetic wastewater prepared from the dispersion of crude oil in saline solution. The system was stirred for 25 min at 33,000 rpm and then allowed to stand for 50 min to allow free oil separation. The initial oil concentration in synthetic wastewater was 300 ppm and 35 ppm for the flotation and the photo-Fenton steps, respectively. These values of initial oil concentration were established based on average values of primary processing units in Potiguar Basin. The processes were studied individually and then the integration was performed considering the best experimental conditions found in each individual step. The separation by flotation showed high removal rate of oil with first-order kinetic behavior. The flotation kinetics was dependent on both the concentration and the hydrophilic-lipophilic balance (HLB) of the surfactant. The best result was obtained for the concentration of 4.06.10-3 mM (k = 0.7719 min-1) of surfactant EO 2, which represents 86% of reduction in TOG after 4 min. For series of surfactants evaluated, the separation efficiency was found to be improved by the use of surfactants with low HLB. Regarding the TOG reduction step by photo-Fenton, the largest oil removal reached was 84% after 45 min of reaction, using 0.44 mM and 10 mM of ferrous ions and hydrogen peroxide, respectively. The best experimental conditions encountered in the integrated process was 10 min of flotation followed by 45 min of photo-Fenton with overall TOG reduction of 99%, which represents 5 ppm of TOG in the treated effluent. The integration of processes flotation and photo-Fenton proved to be highly effective in reducing TOG of produced water in oilfields

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Este artigo discorre sobre o pensamento pedagógico de Rui Barbosa expresso em seus pareceres sobre a Reforma do ensino primário e várias instituições complementares da instrução pública e outros trabalhos extraídos de suas Obras Completas. Trata-se de indagar qual era a perspectiva do ideário liberal sobre educação em finais do Segundo Império no Brasil e qual a possível repercussão desse debate para as discussões travadas sobre educação durante a vigência da Primeira República.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This study aimed to describe and analyze aspects of the historical course of teaching Mathematics by Radio Experiences in Rio Grande do Norte, between the decades from 1950 to 1970 in order to organize a documentary (CD-ROM) containing information about Mathematics studied by Radio who have experienced it. In this, we use qualitative research. We seek support in the theoretical framework of cultural history and memory researchers as Certeau (1998), Chartier (1990), Le Goff (2008), Thompson (2002) and Peter Burke (2004). Moreover, we take the elements of oral history. We focus on the teaching of literacy and the primary of the Radio schools in two rural communities - Logradouro and Catolé - who are currently part of the city of Lagoa Salgada (RN) and, with respect to the Junior High School, we stopped in the Course of Madureza at Radio. We used as written sources, especially the documents found in the General Archives of the Archdiocese of Natal (RN) and the employees assigned by the participants of the survey. Our sources come from the oral testimonies of pupils and monitors Lagoa Salgada City, teachers, broadcasters and technicians of Rural Support Service (SAR) Natal (RN). In this study, we identify the geometry Cubação social practices of Lagoa Salgada students. Also identified in the research material, the Global Method with the pedagogy of Paulo Freire, that guided the production of lessons in literacy and primary courses. Content in Mathematics, we find traces of the trend-Empirical activist. In the course of Madureza, there was a tendency formal technique Fiorentini (1995). Finally, as a result of this study, organize and present a documentary (CD-ROM), along with the analysis of this study, containing the history of Mathematics teaching by Radio, from the speech of those who experienced Radio, emphasizing the methodology teaching developed in class, that serves as a reference material for students, professors and researchers.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Considérant que le Brésil est un pays considéré comme «non- lecteurs», nous avons essayé de trouver des solutions pour inverser cette situation d'exclusion sociale à travers des campagnes et des projets. Le slogan était le moyen de la propagande a proposé à cet effet. En étant un peu éclairante, il a été considéré qu'ils étaient peut-être inséré dans un contexte idéologique, en passant, qui faisait alors partie de l'objet d'études en question et, en conséquence, l'objectif était d'étudier comment, dans niveau discursif, les relations sociales de l'idéologie et du pouvoir dans ces dessins slogans verbaux et des campagnes publicitaires pour encourager la lecture. Nous avons utilisé comme instrument de collecte de données en 2007 slogans projets (sept) et l'intensification des campagnes de publicité dans les années 1995 à 2006, peu après la création de la descendance en 1992, où son fonctionnement a été analysé et discours idéologique, en cherchant à identifier les états effets de sens proposé. Nous avons utilisé pour soutenir la perspective de recherche d'analyse du discours de l'école française, affiliée à Pêcheux. Afin de sens les effets sens des tests a été fait une semi-ouverte aux enseignants qui traitent directement avec l'enseignement de la lecture de l'Institut de l'Enseignement Supérieur du Président-Kennedy, situé à Natal / RN. On été appliqués 100 questionnaires, parmi lesquels 60 d‟entre eux utilisés pour l‟analyse. La recherche a démontré par l'analyse, que la façon d'encourager les gens à lire se déplace à travers le modèle principal de la compréhension de la lecture à laquelle les slogans ont été utilisés, en les intégrant dans un discours dominant, qui ne contribue pas de manière significative à l'augmentation le nombre de lecteurs dans le pays. Grâce à l'analyse des slogans et la réception des sujets de recherche, nous nous rendons compte de la diversité et l'idéologie sont présents en elles, révélant tout le temps, la compréhension de la lecture comme une surface pratique, ne mettre en lumière certaines de ses fonctions Importantes au sein d‟um contexte éducatif plus large

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)